Underl;ying database tables for Setup Tables

Experts,
Can anyone tell me what are the underlying tables for Setup tables for Purchasing which I can check via SE11 in R/3.
Thanks,
Jain

Hi Rajesh,
You can check the records in NPRT transaction.
Hope this helps you.
Regards,
Saravanan.

Similar Messages

How to reduce downtime for setup table

Scenario u2013According to system data, Setup table will normally take 5 days to fill but client agreed only for max 2 days downtime. User can do change only last 3 month documents not before that. For filling 3 month data in set up table 1 day required so I have to mange options accordingly.
Datasource u2013 2LIS_13_VDITM -> DSO u2013 ZBIllIG ->Info cube
I have to Reduce Downtime for Setup table so planning following optionsu2013
1.     First run the info package for Initialization without data transfer. Then start filling setup table without blocking the User. In case Users changes any document at the time of filling setup table then these changes will move to delta queue. Once setup table filled then execute full repair request and then Delta info package.
2.     Early delta initialization u2013 no idea how to perform steps.
Please share your views with detail steps.
OLI*BW doesnu2019t have any date range in selection criteria so manually I will find out document for particular dates and use these document range.
Checked lot of post in SDN but still expecting final answer to go ahead in Production.

Hi ,
Your requirement is Billing ODS and Cube - Reset up in R/3 SYSTEM & Initialization in BW SYSTEM .
Before starting find the previous data load volume and size.
1.Go to LBWG application value=13 (Always Schedule the job in the back-ground mode)
2.Verify using tcode u2018SE16u2019 that there are NO records in u2018MC13VD0ITMSETUPu2019 table after above delete job is complete.
3.Suspend the process chain job in BW.This is to avoid it getting kicked off while the reload process is still in progress.
4.Need to check LBWQ in R/3 system for MCEX13, unprocessed Outbound queue (records). This should be empty as the last delta would have processed all.
5.Delete the initflag in BW.
6.Need to check RSA7 in R/3 SYSTEM to verify that there is NO record for 2LIS_13_VDITM    (to be done right before the Setup job).
7.Create New Info Package for Info Source '2LIS_13_VDITM' for u2018Initialize without Data Transfer Optionu2019 .Execute the package.Re-establish the Delta processing flags in R/3 and BW for the Billing TD load .
8.Save the record count for table u2018VBRPu2019 using SE16 right before the setup job.
9.Schedule Billing Data Setup Job 'OLI9BW' in R/3 SYSTEM .
10.After the Billing Setup job is complete in R/3 system, get the record count of table u2018VBRPu2019 again using u2018SE16u2019
Expeted time in R/3:5 to 7 hrs(setupjobs)
Expeted time for init and fullload : 6 hrs
ODS activation : 3hrs
Cube and with agrregates fill all : 8hrs.
Thanks,
naidu.

How downtime can be reduced for setup table update.

Hi;
Can anyone tell me various ways to reduced system downtime for setup table updates.
thanks
Warm Regards
Sharebw

Hi,
You will need to fill the set up tables in 'no postings period'. In other words when no trasnactions are posted for that area in R/3 otherwise those records will not come to BW. Discuss this with end user and decide. Weekends are a general choice for this activity.
try Early Delta Initialization
With early delta initialization, you have the option of writing the data into the delta queue or into the delta tables for the application during the initialization request in the source system. This means that you are able to execute the initialization of the delta process (the init request), without having to stop the posting of data in the source system. The option of executing an early delta initialization is only available if the DataSource extractor called in the source system with this data request supports this.
Extractors that support early delta initialization are delivered with Plug-Ins as of Plug-In (-A) 2002.1.
You cannot run an initialization simulation together with an early delta initialization.
hope this link may make you clear about early delta init
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
thanks,
JituK

Is there any command/query/etc, which would allow to understand what database objects (for example tables) are consuming memory and how much of it?

TimesTen Release 11.2.1.9.6 (64 bit Linux/x86_64)
Command> dssize;
PERM_ALLOCATED_SIZE:      51200000
PERM_IN_USE_SIZE: 45996153
PERM_IN_USE_HIGH_WATER:   50033464
TEMP_ALLOCATED_SIZE:      2457600
TEMP_IN_USE_SIZE:         19680
TEMP_IN_USE_HIGH_WATER:   26760
Is there any command/query/etc, which would allow to understand what database objects (for example tables) are consuming memory and how much of it?
tried to use ttsize function, but it gives some senseless results – for example, for the biggest table, tokens, it produces following output (that this table is 90GB in size – what physically cannot be true):
Command> call ttsize('tokens',null,null);
< 90885669274.0000 >
1 row found.

Are you able to use the command line version of ttSize instead? This splits out how much space is being used by indexes (in the Temp section of the TT memory segment), which I think is being combined into one, whole figure in the procedure version of ttSize you're using. For example:
ttSize -tbl ia my_ttdb
Rows = 4
Total in-line row bytes = 17524
Total = 17524
Command> create index i1 on ia(a);
ttSize -tbl ia my_ttdb;
Rows = 4
Total in-line row bytes = 17524
Indexes:
Range index JSPALMER.I1 adds 5618 bytes
Total index bytes = 5618
Total = 23142
Command> call ttsize ('ia',,);
< 23142.0000000000 >
1 row found.
In 11.2.2 we added the procedure ttComputeTabSizes which populates system tables with detailed table size data, and was designed to be an alternative to ttSize. Unfortunately it still doesn't calculate index usage though, and it isn't in 11.2.1.

Missing most detailed table for dimension tables

Hi ,
I am getting this following error
Business Model Core:
[nQSError: 15003] Missing most detailed table for dimension tables: [Dim - Customer,Dim - Account Hierarchy,Dim - Account Region Hierarchy,Fact - Fins - Period Days Count].
[nQSError: 15001] Could not load navigation space for subject area Core.
I got this error when I tried to configure # of Elapsed Days and # of Cumulative Elapsed Days by following way-
1. Using the Administration Tool, open OracleBIAnalyticsApps.rpd.
Configuration Steps for Controlling Your Data Set
Configuring Oracle Financial Analytics 5-51
The OracleBIAnalyticsApps.rpd file is located at:
ORACLE_INSTANCE\bifoundation\OracleBIServerComponent\coreapplication_
obisn\repository
2. In the Business Model and Mapping layer, go the logical table Fact - Fins - Period
Days Count.
3. Under Sources, select the Fact_W_DAY_D_PSFT logical table source.
4. Clear the Disabled option in the General tab and click OK.
5. Open the other two logical table sources, Fact_W_DAY_D_ORA and Fact_W_
DAY_D_PSFT, and select the Disabled option.
6. Add the "Fact - Fins - Period Days Count" and "Dim - Company" logical tables to
the Business Model Diagram. To do so, right-click the objects and select Business
Model Diagram, Selected Tables Only.
7. In the Business Model Diagram, create a new logical join from "Dim - Company"
to "Fact - Fins - Period Days Count." The direction of the foreign key should be
from the "Dim - Company" logical table to the "Fact - Fins - Period Days Count"
table. For example, on a (0,1):N cardinality join, "Dim - Company" will be on the
(0/1) side and "Fact - Fins - Period Days Count" will be on the N side.
8. Under the Fact - Fins - Period Days Count logical table, open the "# of Elapsed
Days" and "# of Cumulative Elapsed Days" metrics, one at a time.
9. Go to the Levels tab. For the Company dimension, the Logical Level is set to All.
Click the X button to remove it. Repeat until the Company dimension does not
have a Logical Level setting.
10. Make sure to check Global Consistency to ensure there are no errors, and then
save the RPD file.
Please help me to resolve.
Thanks,
Soumitro

Could you let me know how you resolved this. I am facing the same.

"Missing most detailed table for dimension tables" eror when I run the Global Consistency check

ERRORS:
Business Model DAC Measures:
[nQSError: 15003] Missing most detailed table for dimension tables: [D_DETAILS,D_EXECUTION_PLAN,D_TASK].
[nQSError: 15001] Could not load navigation space for subject area DAC Measures.
I am also attaching my Business Model layer for easy understanding. I have a fact table and several Dimension table. I got this error only after creating the following hierarchies:
Execution Plan -> Tasks -> Details
Start Date Time Hierarchy
End Date Time Hierarchy
Is there a solution for this problem? Thanks in advance!

Yes ! My Task Hierarchy has 3 dimension tables that form a hierarchy :Execution Plan -> Tasks -> Detail
All the 3 levels in the hierarchy are 3 different dimension tables.

What are the Target Base Tables for FA_TAX_INTERFACE table?

Hi,
We are using "upload tax book interface" program to update the Tax Book informaiton.
For this we wanted to know all the Target Base Tables for FA_TAX_INTERFACE table (Specially for the ATTRIBUTE1-ATTRIBUTE15 columns of the interface table).
Kindly request you to help on this.
Thanks & Regards,
Satvik Patel

Well, what are you reconciling to? You are looking at something that seems to be different from your data extract, so what is that thing? My trouble shooting process is to take an asset that seems to be wrong and reconcile from the report/screen data to the extract data. You have to figure out what Oracle program is involved and what kind of SQL that the program is doing and what tables it is looking at. This could be an Oracle program error. I just ran into a problem on the Payables Posted Invoice Register report, where the total did not match my extract total. Turns out the report was wrong. If I had table records with a date/time stamp value (instead of just a date stamp value) in the accounting date field for the TO ACCOUNTING DATE value in my report request selection, those records were being dropped from the report. I reported this to Oracle support and found out that there is a patch to fix the problem (happens when cancelling an invoice) and a data script to follow to fix the historical data. So you have to keep an open mind. Yes, trying to find a reconciling issue can be very painful.
My reaction is that you are looking at the right tables. There is also a FA_DISTRIBUTION_HISTORY table that you may want to look into, that links back to the FA_DEPRN_DETAIL table. Maybe your issue lies there. At least something to look at.
John Dickey

ABAP table for "Condition table"

Dears,
Could you please tell the ABAP table for Condition table.
My requirement is : I need to check a field e.g. KUNNR, in which all the condition tables KUNNR is been used.
Thanks
pinky

Hi,
Use t.code se16n, and then provide the sales order number for vbak,
or vbap take value of field KNUMV (The internal number under which
the system saves conditions that apply to a sales order header),
KNUMH (The internal number under which the system saves conditions
that apply to a sales orde itemr), and go to KONV (for vbak) and KONP
(for vbap) enter this KNUMV or KNUMH number and execute , you will get
all item pricing conditions for that sales order.
For pricing record :- table KONH - Condition (Header)
table KONP - Condition (Item)
with field KNUMH - Condition record number.
hope this will help.
regards
Vivek.

[nQSError: 15003] Missing most detailed table for dimension tables:

Hi,
I am new to BI. I created fresh respository from the scratch.
When run the consistency check I get the following messages.
[nQSError: 15001] Could not load navigation space for subject area SALES.
[nQSError: 15003] Missing most detailed table for dimension tables: [Products,Customers].
Can anyone help me on this.
Thank you
subra.

Got rid of the problem by deleting and recreating the dimension tables.
Subra.

Database tool for routing table history changes

Dear Community, I'm looking for a freeware tool to hold history changes in routing tables for small to medium network running BGP, OSPF and MPLS VPN routing tables via VRFs. This tool need a way to compare the database in order to know if these are the same during the time.
Is there a way to do this in Cisco Works?
Thanks in advances for your recommendations.

Julius,
There are no industry recommended open source DB tools.
Normally it depends upon the developer preferences that how he/she wants to see the tool usability.
I can suggest you to go through the below link:
http://sourceforge.net/search/?type_of_search=soft&words=SQL+Tools
You can find many open source SQL tools, which you have to test and select one among them.
I can suggest you to use:
1) TOra
2) Easy SQL
3) SQuirrel
"Choose a Tool which is easy to use and efficient, Dont worry about Look n Feel"
Best of Luck

Steps for Setup table

Hi,
I am using 2lis_02_itm and when trying to pull data.. it is not taking single record.
What we have to do? DO we have to fill setup table?
How to do this.>Can anyone explains me in steps
Thanks
Ananya

step is to Delete the setup tables
7). Go to T-Code SBIW
8). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Delete the content of Setup tables (T-Code LBWG)
vi. Select the application (01 Sales & Distribution) and Execute
- Now, Fill the Setup tables

TCodes for setup tables

Hi experts,
Can anyone provide me the transaction codes to fill the setup
tables of:
2lis_11_vaitm
2lis_12_vcitm
2lis_13_vditm
2lis_04_p_matnr
2lis_02_itm.
Full points will be assigned.
Thanks & Regards,
V N.

Hello,
Goto SE93 OLI*BW -> F4 you will get all the Setup table tcodes
OLI1BW               INVCO Stat. Setup: Material Movemts
OLI2BW               INVCO Stat. Setup: Stor. Loc. Stocks
OLI3BW               Reorg.PURCHIS Extract Structures BW
OLI4BW               Restructure of PPIS Extract Strctrs
OLI7BW               Restructure of VIS Extr. Struc. Ord.
OLI8BW               Restructure VIS Extr. Str. Delivery
OLI9BW               Restructure VIS Extr. Str. Invoices
OLIFBW               Restruct. Rep. Manuf. Extr. Structs
OLIIBW               Reorg. of PM Info System for BW
OLIQBW               Reconstruct QM Infosystem for BW
OLISBW               Reorg. of CS Info System for BW
OLIZBW               INVCO Setup: Invoice Verification
Thanks
Chandran
Edited by: Chandran Ganesan on Jun 11, 2008 3:31 PM

Steps for setup tables for 2lis_08trfkz?clarification?

Hi guru's
we want to enhance the extrator 2LIS_08TRFKZ.
I just want to know which transaction we use to fill setup table for this extractor.
Do we use OLI8BW or something else
A quick response wil be highly appericiated.
Regards,
Amandeep

Hi Srikanth,
Thank you for a quick response.
Yes i have deleted the setup tables before filling them
the job status say it is finished
the only bit i am worried is the log which says the setup is for application 12 although we are running it for 2lis_08trfkz and which is under application 8(shipment).
Please clarify if this is the it is suppose to work.
Once again thank you very much for your help and time.
Regards,
Amandeep.
Start date        14.10.2006   Name of run      TRFKZ
Start time        19:49:49     User name        SINGAM
Date of terminatio00.00.0000   Application      12
Time of terminatio00:00:00     Source table     LIKP
Finish date       15.10.2006   New run
Finish time       03:53:37     Document from    0000000000
Duration (min)    483.8        Document to      ZZZZZZZZZZ
No. of docs       1,707,237    Version          &(
                               Variant

Period for Setup table Fill

Hi Experts,
Is there anyway of giving time ranges for filling up sales order & billing document setup tables?
LIke, i want to fillup setup table for sales order for the month of Jun to August 2007.....can do this?how?
Any help is appreciated.
Rgrds,
Vaishnavi
Edited by: Vaishnavi S on Apr 17, 2008 5:34 AM

Hi,
I think you can. I believe you are trying to fill setup tables using some selections (probably to minimize init down time).
This should help.
Fill the setup tables with already closed values and then fill up again with open values.This will reduce the down time.
Initialize closed periods first in which users wont enter data ( for example in 2007 or 2006), this initializations can be done while users are working. Then the initialize last period at night/weekends.holidays etc.
If you know documents that are in closed periods, and you are sure that these documents can no longer be changed, you can only fill the SetUp tables for these documents or only for these periods, by continuing to post in open periods. You then initialize only for these intervals, delete the setup table, and only then do you fill the setup table with the rest of the documents this procedure can drastically reduce the downtimes of your system.
However, there is a risk that user exits (and in LIS, formulas and conditions) can be used to retrieve documents that are in periods that are already "closed periods".
One more thing what you need to bear in mind is, to check if there are any Scheduled jobs which are updating the transaction tables, which would definitely cause Data Reconciliation Issues.
Multiple init
Thanks,
JituK

Overwrite Functionality for Setup Tables

Hello SAP Guru's,
I have question can we overwrite the setup tables if it got cancelled due to some reason in SAP ECC server .
Regards,
Quaraishi

Dear,
Setup tables are cluster tables. Now the Full load to this table does not take long time in source system. So from performance perspective this is not beneficial to do the Setup table overwrite.
But if you want to know from knowledge purpose, then answer is no. You can NOT Overwrite to a setup table.

Underl;ying database tables for Setup Tables

Similar Messages

Maybe you are looking for