Undocumented ODBC Error when trying an insert on ORACLE 8 from ACCESS97

Hi
I have a application with ACCESS 97 dealing with Oracle 8.1.7
The ODBC Driver version is 8.01.06
The connecting chain is : ODBC;DRIVER={Oracle ODBC Driver};DBQ=DP3_IST;" & _
"DBA=W;APA=T;FEN=T;QTO=T;FRC=10;FDL=10;LOB=T;RST=T;FRL=F;MTS=T;CSR=F;PFC=10;TLO=0;
I have no problems for reading with select but when i try to execute an insert,
i get the following error message: " reserved error (-7778); there is no message for this error "
It work's when using the "Microsoft ODBC for Oracle 2.573.3711.00" and unfortunatly i'm not allowed to use it.
Does anyone know what was the problem?
Regards
Pierre-Yves LAGRAVERE

The two lines you quote aren't errors, they're warnings and they're pretty standard fare. If there isn't anything else in the ODBC log, then the driver isn't returning any errors. I'm not sure why Access is failing, so let's look at the client configuration first.
- I assume you've successfully installed the 8.1.6 client on the machine with Access. Were there any errors during the install?
- You say you're using the 8.1.6 version of the Oracle ODBC driver-- can you look to see what the last digit of the version is? If possible, I'd start by downloading the most recent 8.1.6.x ODBC driver from OTN.
- Check which version of the MDAC you have installed (new versions & a version checker are available from Microsoft at <http://www.microsoft.com/data>.
- The ODBC driver you download above will list which versions of the MDAC it is expected to work with. Make sure your version is one of the listed versions.
Justin

Similar Messages

There is an error when trying to upgrade to Mavericks from OX Lion

There is an error when trying to upgrade to Mavericks from OX Lion

So whenever i click on "free upgrade" ..that message shows up next to it..

Getting a 1809 error when trying to remote control PC from the Console.

This is message i get when trying to remote view or remote control PC.....
1809: An error has occurred while generating a session key for
encryption.The remote session cannot be initiated. Contact Novell
Techical Services and specify this code.

This is for a 1807 error. My error is and 1809 error. Is there somewhere
else to research on a 1809 error when trying to remote control PC from
the Console?
> Perhaps.................
>
> http://support.novell.com/techcenter/search/search.do?
cmd=displayKC&docType=kc&externalId=10094808html&s liceId=&dialogID=2356487
>
> --
> Craig Wilson
> Novell Product Support Forum Sysop
> Master CNE, MCSE 2003, CCNA
>
> Editor - http://www.ithowto.com
>
> (Seeking Full-Time Expert? Drop me a note :> )
> <[email protected]> wrote in message
> news:09i_e.2044$[email protected]..
> > This is message i get when trying to remote view or remote control
PC.....
> >
> >
> > 1809: An error has occurred while generating a session key for
> > encryption.The remote session cannot be initiated. Contact Novell
> > Techical Services and specify this code.
>
>

CUOM error when trying to poll performance data from IPCC Express

Hi Network Professionals,
Using CUOM 2.1 SP1 I get an error when trying to access the Performance menu for a IPCC Express Server in the Service Level View.
Error Message:
Performance polling is not supported for the current capability.
The server is fully monitored and I get enviroment, system, interface and application information.
I the Polling Parameters menu (Voice Utilization Settings) the only parameter listed is "Communication Manager and Registred MGCP Gateway Utilization".
The IPCC Express version is 5.0.(2)SR01_Build045.
Is anything missing on the IPCC server? I have only configured it with SNMP.
Kind Regards
Johnny Olsen

hi teresa.
well I bother you because I have a problem similar to that raised earlier, I have a vm INTAL CUOM 2.1 SP1 and the problem is that computers add-in-law his administration IPCC view the service level ... but when I fall into a custom group created the group and add the teams the same ip ipcc already visible, in my group I want to generate displays custom cloud but do not show me the equipment, except that I want to add IVR servers and I do not under any circumstances the samples .. lso probe and reset everything and anything related services, install the SP! and nothing. Can you help me with this or if I recommend CUOM up version of the 2.3 that I could not even see the difference with 2.1 CUOM thanks greetings

Getting an error when tried to access task form from worklist app

Hi All,
I am using 10.1.3.4 BPEL PM. I have created a bpel process with a human task.
From the worklist application, when the approver clicks on: Task Id (ideally it should open task form).
In my case, I am getting an error:
Error while inoking URL to display the content. Error while invoking URL. http://bluejays.appsassociates.com:7780/default/EditPayloadPOC1/v2009_05_21__82618/EditPayloadPOC1/EditPayloadPOC1.jsp Check the underlying exception and correct the error. Contact oracle support if error is not fixable..
If you need more information, please check with your administrator with the following exception-identifier: "2009/05/21_12:16:43:777_oc4jadmin"
It works fine in SOA suite 10.1.3.1. and does not work in BPEL PM 10.1.3.4
The only difference is I deployed in 10.1.3.1 using Ant script of bpel project and in 10.1.3.4 I deployed using the BPEL Console itself by browsing the project jar(Since I am getting error when tried to deploy it using Ant).
Is it a known bug or am I making anything wrong. Tried with both Autogeneration and Custom form
I followed: http://download.oracle.com/docs/cd/E11036_01/integrate.1013/b28981/workflow.htm#BABCBAEI
Thanks
Sakrishna Panuganti

Hi does your bpel process has more than one human tasks, e.g., HumanTask1, HumanTask2, HumanTask3...then pl. check and manually fix this below ...e.g.,
check for all of the human tasks workflow contexts tasks forms for dynamic pointers for
domain_id, process_id, process_version.
edit public_html/HumanTask1/form/ear/META-INF/application.xml
<web-uri>workflowform.war</web-uri>
<conteit-root>/${domain_id}/${process_id}/${process_revision}/HumanTask1</context-root>
edit public_html/HumanTask2/form/ear/META-INF/application.xml
<web-uri>workflowform.war</web-uri>
<conteit-root>/${domain_id}/${process_id}/${process_revision}/HumanTask2</context-root>
edit vi public_html/HumanTask3/form/ear/META-INF/application.xml
<web-uri>workflowform.war</web-uri>
<conteit-root>/${domain_id}/${process_id}/${process_revision}/HumanTask3</context-root>
and deploy the process again via jdeveloper or preferably via ant script and try, it worked just fine for us.

Error when trying to delete a vendor from SC

Hi all,
I am encountering a problem when trying to delete a vendor from a contract and assign preferred vendor.
The messages are
"Enter exactly one partner of type preferred vendor"
"Partner data couldnot be determined".
In BBP_PD, I find two entries in partner table with partner_fct = 39.
I am also not able to delete one of this entry.
Please suggest.
Thanks
Nandalal

Hi Nandlal,
Can you see the business partner nos correctly for the vendors you are trying to assign?
Are these vendors assigned to pur org?
DO you get all greens in BBP_BP_OM_INTEGRATE?
BR
Dinesh

Errors when trying to INSERT Dreamweaver CS3 ASP scripts into MySql

Greetings everyone,
I am hoping that someone can shed some light on an issue I have not been able to solve in the last few days. I have a website that I had built using Ultradev, then MX then CS3, using the default ASP scripts in dreamweaver and an odbc connection to an Access Database. Everything had been working fine for the last couple of years until recently where more people were visiting my site which resulted in the slowness because i was using access. I decided to move to a MySql database and that is when I ran into issues. I was able to solve most everything accept for one issue I am having. I was hoping it would be an easy transition by changing the ODBC connections but it has not been that easy. Any page I have with an INSERT command using the default Dreamweaver CS3 ASP script results in an error. Now I can query and delete and search with no problem...it is just the INSERT that is giving me issues. Here is just a general insertion script that CS3 does by default....
<%
If (CStr(Request("MM_insert")) = "form1")Then
If (Not MM_abortEdit) Then
' execute the insert
Dim MM_editCmd
Set MM_editCmd = Server.CreateObject ("ADODB.Command")
MM_editCmd.ActiveConnection = MM_adsdata_STRING
MM_editCmd.CommandText = "INSERT INTO commenthot (yeshot, userhot) VALUES (?, ?)"
MM_editCmd.Prepared = true
MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param1", 202, 2, 3, Request.Form("yeshotf")) ' adVarWChar
MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param2", 202, 3, 30, Request.Form("useridf")) ' adVarWChar
MM_editCmd.Execute
MM_editCmd.ActiveConnection.Close
End If
End If
%>
When I click to submit...the error i run into is...
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[MySQL][ODBC 3.51 Driver][mysqld-5.0.67-community-nt-log]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ' mel)' at line 1
/fr/members/sexyoupasvote.asp, line 28
....Line 28 is the MM_editCmd.Execute. I notice if I put a single quotes around the ? next the the VALUE like this ('?', '?')...it does go through and the ? shows up in both fields as the data.
....If i put a single back quote around the column names like this (`yeshot`, `userhot`) VALUES (?, ?) I get this error and nothing gets inserted into the MySql.
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[MySQL][ODBC 3.51 Driver][mysqld-5.0.67-community-nt-log]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ' mel)' at line 1
/fr/members/sexyoupasvote.asp, line 28
...by seeing 'mel)' show up, I know it is at least passing the data to that field.
....when I do (`yeshot`, `userhot`) VALUES ('?', '?')...
it goes through and inserts ? ...instead of the real data I want to use...in this case ...the number 1 and Mel.
...if I do (yeshot, userhot) VALUES (?, '?')...
I get this error...
Microsoft OLE DB Provider for ODBC Drivers error '80040e21'
Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.
/fr/members/sexyoupasvote.asp, line 28
....any idea what to modify to make it insert the corect data? Has anyone experienced this? If I can get this fixed with just this page I can probablly fix the other pages that have teh same issue. Is there a special setting on the MySql that I should know about to allow data to be inserted? Any help would GREATLY appreciated!
Thank you!

Thanks for your reply!
When it was in Access...the datatype was Text. I used a 3rd party software to convert Assess directly to my hosting MySql server. When I logged in to see the table in MySql, it is set to Varchar(3) for yeshot and Varchar(30) for userhot. There is also an extra field I used for the KEY called commentID which is set to int(11) and it is autonumbered. Under the Collation i have utf8_general_ci set on the yeshot and userhot field. Null is No on both and the Default is set to None and all 3 fields.
I have a form I am collecting that data from which is:
<% If (langname.Fields.Item("langname").Value)="FR" Then
         response.write("OUI!")
         else
         response.write("YES!")
         End if %>
<input name="yeshotf" type="radio" id="yeshotf" value="1" checked>
                            <span class="style10">
                            <input name="submit" type="submit" id="submit" value="VOTE!">
                            </span> -
<input name="yeshotf" type="radio" id="yeshotf" value="2">
                            <% If (langname.Fields.Item("langname").Value)="FR" Then
         response.write("NON!")
         else
         response.write("NO!")
         End if %>
                            <input name="useridf" type="hidden" id="useridf" value="<%=(hotornot.Fields.Item("membername").Value)%>">
                            <input type="hidden" name="MM_insert" value="form1">
                          <input type="hidden" name="hdwfail" id="hdwfail" value="sexyoupasvote.asp?langname=<%=(langname.Fields.Item("langname").Value)%>&membernam e=<%=(hotornot.Fields.Item("membername").Value)%>&hdwmsg=invalid">
</form>
....the form has 2 radio button and 1 hidden field where I collect the username. The radio value should either be a 1 or a 2 depending on the selection by the user. I also have a captha on the form but that does not seem the cause any problem since I am not collecting any data from it. Does this help? I left the yeshot field as Text but I can change that to Numeric data... again thanks for your assistance in helping me try to figure this out.
...The message I am getting now is:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[MySQL][ODBC 3.51 Driver][mysqld-5.0.67-community-nt-log]Unknown column 'Babe1' in 'field list'
/fr/members/sexyoupasvote.asp, line 28
....with this setting:
<%
If (CStr(Request("MM_insert")) = "form1") Then
If (Not MM_abortEdit) Then
    ' execute the insert
    Dim MM_editCmd
    Set MM_editCmd = Server.CreateObject ("ADODB.Command")
    MM_editCmd.ActiveConnection = MM_adsdata_STRING
    MM_editCmd.CommandText = "INSERT INTO dsnrenms.commenthot (yeshot, userhot) VALUES (?, ?)"
    MM_editCmd.Prepared = true
    MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param1", 202, 1, 3, Request.Form("yeshotf")) ' adVarWChar
    MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param2", 202, 1, 30, Request.Form("useridf")) ' adVarWChar
    MM_editCmd.Execute
    MM_editCmd.ActiveConnection.Close
End If
End If
%>

XSQL error when trying to insert record

hi,
I encounter a problem using INSERT statement in xsql:query action. If I try to use INSERT statement in my xsql page like this:
<xsql:ze_action bean="TaskentryIn">
<xsql:query>
INSERT
Grundtab( Datum,Startzeit,Endzeit)
VALUES
('{@date}',{'@begin}','{@ende}')
</xsql:query>
</xsql:ze_action>
I always get this xsql-error:
Statement.executeQuery - No result sets were produced by 'INSERT...'
So far so good, I think this shouldn't be an error rather a warning.
But this is not my primary problem.
Anyway the record is inserted in the DB. But since I call the above <xsql:query>, from within my own action handler, I call a sendRedirect() to my next page after the <xsql:query> tag was processed.
After sendRedirect(), when I am on my next page, I check the DB for the inserted records, and it shows up that the insert was made two times, so I have two identically records in my DB.
If I am not sendRedirect() to the next xsql page, then the insert is only made once. So I assume that there is a problem if an xsql-error occurs and afterwards a sendRedirect().
I am using the same way to make my SELECT statements and I dont have any trouble with them. Only when I use INSERT.
Any adive or help is appreciated.
Peter

<xsql:query> is only for queries.
Use <xsql:dml> for a DML statement.

"There isn't enough memory to read worksheet" error when tried to open xlsx object from Powerpoint 2010

Hi,
I have a powerpoint presentation (will call it A.PPTX) which has an embedded spreadsheet object (B.XLSX). I was able to double click the object in "A" and open "B.XLSX" as and when necessary.
today, i opened B from the A and inserted another spreadsheet C.XLSX as an object in B. Closed all the files and saved A.PPTX. when i tried double click and tried to open B.XLSX from the powerpoint, i am getting an error "There isn't enough memory to
read worksheet"
Unfortunately, i don't have a backup of B.XLSX as I always edited it by opening it from the presentation. is there a way to recover it?
Note:
1. read through similar threads in the forum about errors while inserting objects or similar error in Powerpoint 2003. the solution provided did not help

Hi
By the description, you want to recover the embedded worksheet in PowerPoint.
Try following methods:
1.Click to the presentation file
2.Change the file extension from pptx to zip
3.Open the file, locate to ppt>embeddings
4.There you will see the embedded worksheet
5.Save the file to another path and open it
If the worksheet is still corrupted, following these steps to recover an Excel file:
1.Change the file extension from xlsx to zip
2.Open the file, locate to xl>workbook.xml
3. These XML files contain the data of each spreadsheet.
4.Copy the data to a new worksheet and save
Regards
Tylor Wang
TechNet Community Support

Getting 404 error when trying to login to Oracle EBS page

Hi,
I had installed Oracle EBS 12.0.4 last year and everything was running fine until last week. Last week, we suddenly started seeing this issue - when trying to login to the Oracle EBS page, we are getting the 404 page not found error.
I have EBS installed on 2 VMs (virtual machines) - one VM has the application server and other VM has the database server. I logged on to the aplpication server to do some debugging and noticed 2 things ->
1.The Oracle Fullfillment service was not running. I started it, it was up for some time but then it stopped on its own. This happens everytime - after successfully starting the service, it shuts down after sometime. There is nothing in the event viewer except this message "The service may have terminated abnormally, please see the log file generated by the service for more details." I checked the log file, but there is nothing significant inside the log file. Maybe I need to increase the log level. Can any one tell me how can I do that?
2. Reviver.exe was crashing intermitently on the application server. I belive reviver tries to establish the connection between the application and database server after its broken.
So I am thinking now that maybe the connection between the app server and the database server is getting broken intermittenlty and this is the root cause of all the problems.
I dont know how to verify whethe my analysis is correct or not? And it it is, how to resolved it? Is there a setting or a configuration file in which you have to specify the database server details (ip address / host name etc). Can you tell me where can I find this setting?
Or culd there be something altogether different that is causing the page not found error?
Thanks in advance,
Megha

Hussein,
The problem is partially solved - I am not getting the 404 error now. The issue was not with the netsvc file. Please see the resolution in NOTE:412980.1 (oafm,forms and oacore not starting up after IP adress change).
The OC4J services are imperative for any URL for java code. With just the Apache listener running, examples of URLS that will work are ->
http://HOST.DOMAIN:PORT/OA_MEDIA/FNDLOGOL.gif
http://HOST.DOMAIN:PORT/
Any URL for Java code will fail at this stage when OC4J services are down. For example this URL will fail: http://myHost.oracle.com:8000/OA_HTML/ServletPing.
But now, I am getting 500 Internal server error. Let me know if you kno anything about this error ->
oracle.apps.fnd.cache.CacheException at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1485) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:354) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:211) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:171) at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148) at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1259) at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1114) at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:1083) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1050) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1037) at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:595) at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:941) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:926) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:891) at oracle.apps.fnd.common.AppsContext.<init>(AppsContext.java:751) at oracle.apps.fnd.common.WebAppsContext.<init>(WebAppsContext.java:1014) at oracle.apps.fnd.sso.Utils.getAppsContext(Utils.java:525) at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:120) at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:170) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230) at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)Caused by: oracle.apps.jtf.base.resources.FrameworkException: Error in IAS Cache: java.lang.NullPointerException: null Connection at oracle.apps.jtf.cache.IASCacheProvider.get(IASCacheProvider.java:712) at oracle.apps.jtf.cache.CacheManager.getInternal(CacheManager.java:4802) at oracle.apps.jtf.cache.CacheManager.get(CacheManager.java:4624) at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:216) ... 33 moreCaused by: oracle.apps.jtf.base.resources.FrameworkException:
An exception occurred in the method CacheAccess.get
null
The base exception is:
null Connection at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607) at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:66) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:88) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:202) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:218) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:249) ... 37 more

Why do I keep getting an unknown error when trying to download an app from the app store on my iPod touch 4th generation when I put in the correct password?

I keep getting the same unknown error has occurred when trying to download an app what is wrong?

as an example.. from the sprint forum for a different device (unsure what device.. it's just not an iphone since no iphone or ios device has these settings -- ive seen this advice several times and I believe it's some form of android.. but not sure)
advice from the carrier advisor --
"Clear data in the Dialer and Dialer storage.... under manage Applications> All.
That is Settings - Applications - Choose All to view All choices - then find Dialer and clear the Data. Repeat this for the Dialer Storage as well. I personally also deleted the message thread first from the text message window and my log history which is a menu item from your call screen."
and another for you from a customer -- it is sprint again.. but this time a Samsung Epic
"OMG ... if someone can't tell me how to fix this "9230: Message sent using invalid number of digits..." error, I'm going to scream. My husband and I both have Sprint Epic phones and love them EXCEPT for this one problem! Help!"
Maybe they should sue Samsung?

Error when trying to delete a query from production

Hi Experts,
When i tried to delete a query from <b>production system</b> using RSZDELETE, I am getting an error message like " Query object 42BYOKUXDNZBZKMC2VHR5Z19H is blocked. Deletion has been cancelled."
i went to E071 table using SE16,and found out the transports which contains this particular object.This transports have returned error code 8.
Can anyone help me on deleting this object entry from these requests?
<b>How will I delete this particular object entry from these transport requests?</b>
Thanks alot
Shobin

Hi Venkat,
Thanks alot for your quick reply.
I tried that also. But even those transports are not successful.
I would like to know <b>what is the standard procedure to delete objects from a transport request in production</b>.
Already, I unlocked the transport request to Modifiable status.
Thanks alot
Shobin

Database error when trying to view Crystal Report from InfoView

I am receiving the following error when I try to view or run a Crystal Report from the InfoView. The report is based on an SAP InfoSet.
"Failed to load database information."
The report data can be refreshed with no trouble from within the Crystal Reports designer on my local machine, but the error occurs after it is published to the InfoView. The same error appears when trying to import into Excel using LiveOffice.
Server details:
-Edge 3.1
-Windows 2003 64-bit
-SAP Integration kit installed
Local Crystal Reports machine details:
-Windows XP
-SAP Integration kit installed
-Crystal Reports 2008
My steps to troubleshoot so far:
-Checked Database Logon details in CMC for the report. Username and password are entered correctly.
-Cycled all CrystalReports background services off and on again from the CMC
-Rebooted server
Have I missed anything? Any help would be appreciated.

Hi,
do you have any connectivity from your EDGE to the SAP System ? Like can you import roles or run a WebI ?
Regards
-Seb.

Error when trying to serve out documents from webserver

Hi, I have weblogic 5.1 installed and when trying to access documents from
the web browser, I get the following page:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
Anyone seen this before and know how to fix?
Gene Kim

Error when trying to save still image from video with Quicktime Pro

I just purchased Quicktime Pro so that I can use it with my new Nano (the one that shoots video). I want to grab a frame from the video and create a still image (in jpeg format). I should be able to do it, but when I try, I get an error 11005 (or something like that). Anyone know any way to fix this? Thanks!

I also tried the alt/ctrl/shift buttons when clicking Editor in the Photoshop welcome screen. It did ask if I wanted to reset the preferences. I chose yes. I still get the same error message when trying to save for web.
Below....showing I don't have a "save for web" folder on my C drive.
And below, showing the same error after pressing alt/shift/ctrl when clicking on editor and clearing the preferences.
I don't have a 'Save for Web' folder anywhere on my C: drive. I searched and came up with no folder with the text "save for web" in it.
I did find a "save for web" folder on my D: drive and deleted that.. but now when I start up Photoshop, the option for Save for Web is grayed out...not able to select it.

Undocumented ODBC Error when trying an insert on ORACLE 8 from ACCESS97

Similar Messages

Maybe you are looking for