Unit value displaying with trailing zeroes

guys
i have unit value which is displayed corectly in psa but it is coming wrong into ods. if unit in psa is 78 ods is adding 3 zeroes and displaying not sure why it is happing..this is causing problem .
can u please help us out...?

assigned a unit in the DTP

Similar Messages

IHow to force display of trailing zeros for fixed point numbers?

I have an 8 bit unsigned fixed point number, with 7 integer bits and 1 fractional bit, so the desired delta is 0.5. I want it to always display the fractional bit, even when that bit is 0. In other words, as this number is incremented, I want to see:
0.0
0.5
1.0
1.5
etc.
But instead I'm seeing:
0
0.5
1
1.5
etc.
I set the display format to Floating point, with 1 digit of precision. The "Hide trailing zeros" checkbox is NOT checked. What am I doing wrong?
I realize I could convert to single precision for display purposes to make this happen, but I'd rather make this work with fixed point.
Thanks,
-Ron

I just rustled up a VI with what I understand your input to be - unsigned 7 bit mantissa and 1 bit exponent input, and have it displaying 2 decimal places.... Is this what you're after or did I miss it?
- Cheers, Ed
Attachments:
zeros.vi ‏7 KB

Tecra 8000 notebook - display with almost ZERO luminosity

Hi all,
I have a problem with luminosity settings for my Tecra 8000.
I have lowered the luminosity to minimum values but now I am not able to bring it back to a "visible" level.
Thank you for any advice you may have.... it is just frustrating!

Hi
When the computer operates on power through the AC adaptor, the display screens image ill be somewhat brighter than when it operates on battery power. The lower brightness level is intended to save battery power.
If you start the computer with the AC adaptor plugged in and unplug the computer during operation, the brightness level wills not decrease even though the computer is operating under battery power. In this case battery operating time will be shortened.
Regards

RSECADMIN - Authorization Value Entry with Leading zeros

Hello All
Issue: RSECADMIN does not allow to enter a authorization value with "leading spaces". This is an issue for us.
I am using Analysis Authorizations in BI 70.
We have one object say Product Line Char 5.
We have 2 values
'   01' ==> SID 1
'01   ' ==> SID 23
Both have different SID
In RSSM based security design, I was able to enter value '   01' and then authorization was processed and user was able to access the data '   01'. In RSECADMIN, system does not allow me to enter '   01'. It puts this as 01 all the time and then looks for SID 23.
Anyone have any experience on this? I am looking for specific guidance if you have found any solution.
Thanks
Pankaj Gupta

Hi Andreas
It seems to me that after " ' " it considers the whole field as blank. Also field is 5 character long and with Open " ' " and close " ' "I and 01 I can only have one space before 01. I wanted 3 space and then 01.
I will test this and let you know.
Following worked for us:
1) Created a custom hierarchy that keeps '   01' on a node and then use that node to tell what value user is authorize.
2) And it worked. It sounds crazy idea but I was running out of the tricks.
3) It is simple RSECADMIN maintenance tcode bug. It trys to help in Data Entry by Left justing the value. That help was not needed and nessasary at all. Let user get Raw Data Entry screen. Anyway this is not End User Interface tool.
Thanks a lot.
Pankaj Gupta

Display numbers formatted with leading zeros or spaces.

There are some cases where you might need to display numbers with leading zeros or leading spaces, or trailing zeros. I experimented with several methods and came up with some examples. This is a Console application, but the results can just
as well be output to a listbox in a Windows form.
Sub Main()
Dim snum As String, inum As Integer = 56
snum = inum.ToString()
Console.WriteLine(snum & vbTab & " ToString()")
snum = inum.ToString("D4") 'adds leading zeros
Console.WriteLine(snum & vbTab & " ToString(""D4"")")
snum = inum.ToString("F4") '4 decimal places with trailing zeros
Console.WriteLine(snum & vbTab & " ToString(""F4"")")
Console.WriteLine()
snum = String.Format("{0,4}", inum) 'leading spaces
Console.WriteLine(snum & vbTab & " Format{0,4}")
snum = String.Format("{0:D4}", inum) 'leading zeros
Console.WriteLine(snum & vbTab & " Format{0:D4}")
snum = String.Format("{0:F4}", inum) '4 decimal places with trailing zeros
Console.WriteLine(snum & vbTab & " Format{0:F4}")
Console.WriteLine()
snum = inum.ToString().PadLeft(4, "0"c) 'leading zeros
Console.WriteLine(snum & vbTab & " PadLeft(4, ""0""c)")
snum = inum.ToString().PadLeft(4, " "c) 'leading spaces
Console.WriteLine(snum & vbTab & " PadLeft(4, "" ""c)")
Console.ReadLine() Console.Clear()
        For x As Integer = 1 To 20
            snum = x.ToString("D4")
            Console.WriteLine(snum)
        Next x
        Console.ReadLine()
End Sub
Solitaire

I would add that many of these methods also work with numeric types that are not integers.
Note that the "D4" format string doesn't work for non-integral types (such as Double and Decimal), and the "F4" format string doesn't pad with trailing zeros, it rounds to 4 decimal places (which can lose information). PadLeft works with
the entire string, it isn't aware of the decimal point.

Display of leading zeros for a GL account in FS00

Hi all,
does anyone know is it possible to set something in SAP so that in transaction FS00 the gl account number is displayed with leading zeros? Now they are removed.
Thanks!
D.

Hi Dusan,
"Alpha conversion" is already implemented on the domain (SAKNR) itself. You can modify the system (take out conversion exit "ALPHA") from domain SAKNR but I'm guessing this might create inconsistencies in many other dictionary objects.
I think it's better to consider alternavtives - like using character + number as GL account (e.g. A345999)..
Best regards, Kyoko

Key Figure value in Cube showing with extra zeros

Loaded data into the cube. When I display the result
Key figure values are showing with 2 extra zeroes and Quantity value shaowing with 3 extra zeroes.
Original value
Price, Quantity, Sales Rev
2     1     2
3     2     6
When display value from cube
Price, Quantity, Sales Rev
2,00     1,000     2,00
3,00     2,000     6,00
Why zero is showing? How can I display the original value? In PSA, values are showing correctly.
Thanks,

Hi,
These are the zeroes after the decimal places. this is the property of the key figure.
In your report you can change the display value. In the display properties of the Key figure under the number of decimal places make it as 0. This will remove the zeroes.
Hope it helps.
Regards,
Gaurav
Edited by: Gaurav Kothari on Oct 16, 2008 10:35 AM

How to delete trailing zeros from a quantity field to display in ALV?

Hi there,
i am retrieving the field LGMNG from LIPS table, which is of type QUAN(13). All LGMNG values there are stored as
1,000
20,000
50,000 etc.
But i want my values to be displayed as
1
20
50 etc.
i have tried the " shift v_variable right deleting trailing '0'" but it does not work.
also, if the value of LIPS_LGMNG = 0,000, i need those columns in ALV empty(that is no zeros or comma displayed)
can anyone please help?
Thanks a lot,
Mee

hi,
use this it will solve your problem, just write down this on your Fieldcatalog.
   WA_FIELDCATALOG-FIELDNAME = 'VALUE7'.
   WA_FIELDCATALOG-SELTEXT_L = 'Contribution EE(due)'.
WA_FIELDCATALOG-DATATYPE = 'INT2'.           " it will remove trailing zero
WA_FIELDCATALOG-DECIMALS_OUT = 0.
   APPEND WA_FIELDCATALOG TO IT_FIELDCATALOG.
   CLEAR WA_FIELDCATALOG.

I want to remove Trailing zeros from a charecter value

Hello ,
          i want to remove trailing zeros for a prticular value.Following is my code :
DATA: V_FLOAT TYPE F VALUE '4.8240000000000000E+03',
           V_CHAR(25) ,
           P10_4(10) TYPE P DECIMALS 4.
CALL FUNCTION 'CEVA_CONVERT_FLOAT_TO_CHAR'
EXPORTING
FLOAT_IMP = V_FLOAT
FORMAT_IMP = P10_4
ROUND_IMP = ' '
IMPORTING
CHAR_EXP = V_CHAR.
SHIFT V_CHAR RIGHT DELETING TRAILING '0'.
WRITE : V_CHAR ."NO-ZERO.
<u><b>Output:</b></u>
if we pass the value '1.3000000000000000E+01' it should be 13.0
ex2: '1.3400000000000000E+01' it should be 13.4
ex3:'4.8240000000000000E+03' it should be 4824
is there any way to get the solution without functional module. If so Please tell me with code.

hi
u can do it in number of ways.
Use TCODE SU3
Select default tab and select radio button 123467.89 in decimal notation and save it.
or u can try :
if you want to do this through ABAP program.
1. to delete trailing spaces.
SHIFT <V_VARIABLE> RIGHT DELETING TRAILING '0'.
to delete leading zeroes,
SHIFT <VARIABLE_NAME> LEFT DELETING LEADING '0'.
only for one abap program, u can use set country command
for all programs :
sap menu>system->go to user profil->own data>default --> and choose ur format.
hope this helps u.
Regards,
Prasanth
Reward all hepful replies

ABAP-based web service returns numeric values with leading zeros

Hi SOA experts,
I have created a web service out of an ABAP function module. Beside other values, this service returns a list of document numbers. All of these numeric values are returned by the web service with leading zeros, but we do want these values w/o leading zeros.
Any ideas how I can tell the web service to not print any leading zeros?
Thanks in advance for your help!
Kind regards, Matthias
PS: The according function module does not print any leading zeros for the numeric values

hi,
just a guess: I'd try to use I instead of NUMC for the document numbers.
NUMC is no number but a character string with numeric characters only. only some display routines in SAP know that this string of numerals represents a number and omit leading zeroes.
my 2 cents,
anton

Initially net value display zeros on selection screen

hi friends,
I created one modulepool program in that on the selection screen NTGEW(net wt)
field initially displays zero like 0.000, but the user wants it to be blank with out zeros. please sujjest me.
thank u,
with regards,
prasad.

Hi,
For the NTGEW field make sure to populate the corresponding reference field also...
Let's say an example..
If your field name is MARA-NTGEW and the reference field is MARA-MEINS.
Make sure to have the field MARA-MEINS populated with the UOM value.
Thanks
Naren

How to use Special value set with Column clause to display addtional column

hi
can anyone tell me
How to use Special value set with Column clause to display addtional column
how can i use FND POPID and with COLUMN clause ?

Dear Yaseen,
To get the value in formula cumulative,after you have created the formula for that particular key figure,go to edit and click on tab "calculations".
In that select overall result as 'count all values not equal to zero' and single result as 'count all values not equal to zero' .
And mark the cumulative check box underneath.
I hope you get the desired result and please do me favour .
Sumit goomber

Calculate Results As Average of Detailed Values That Are Not Zero... with hiearchies doesn't work

Hi all,
For the key figures, the option of "Calculate Results As Average of Detailed Values That Are Not Zero, Null, or Error" works fine for characteristics drilldown without hierarchies, but with hierarchies it simply doesn't work; instead of calculate the overall result as average, the system calculates it as SUM. It works like the option "Nothing Defined" where the results provided by the analytic engine are displayed. No local calculation takes place.
How can I do to display the overall result of hierarchical drilldown of a characteristic as an average?
Many thanks in advance!
Abraham

It is usually best to just keep it as simple as possible. What do you think the code in the OR Array Elements does? I imagine it is just a simple FOR loop with a variable to keep the latest OR. So I would do what GerdW just showed with the FOR loop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Display only non zero values in rows

Hi Friends,
                  I have a key figure "X', and it is split over 12 months (aging buckets), by using formula, but I want to filter values with zero values ie I want to display all non zer values only.
This looks like
Apr        100
May       200
Jun         200
Jul            0
Aug
Sep
Oct
Nov
Dec
Jan
Feb
Mar
In the above example I dont want to display 'Jul' at all, and the rest should be displayed, Wherein all the above are formula(Apr, May,......)
Is it possible ?
If so , what is method.
I tried supress in query properties , Like supress zeros, but it is not working.
Suggest me
Points assured.
Sanjay

Dear Gupta,
                   In my case condition is not working, as I want to display values that ae non zeros. If I am using conditions, none of the values are displayed like Apr, May,Jun, Jul, etc........, I want to display all values except Jul as that values is zero as per my example.
Please suggest
Sanjay.

How to remove trailing zeros from a decimal (type) value?

Hi Everyone,
I would like to 'drop' some trailing zeros from a decimal value, e.g.: 50.000000, and I am wondering how to go about this?
The value is definitely of decimal type, and in this instance I know that I want to eliminate exactly six (6) zeros.
Any help here will be greatly appreciated.
Kind Regards,
David

Try the below:
This is sort of a display issue, you may do it at Application side, which would be efficient.
Declare @s Decimal(10,6)='50.0000000'
Select Cast(@s as decimal(10,0))

Unit value displaying with trailing zeroes

Similar Messages

Maybe you are looking for