Unity Connection Learning Extension for sign-in

I have a scenario where the client wants everyone to have to enter their ID followed by their PIN to log in to their voicemail box. This has been working great for the last 4 months. Suddenly we are getting calls where users are only asked for their PIN to log into their voicemail box. This is not how it should be working. The configured setup under advanced > conversation is
Name
Value
Sign-in Count for a Number Before It Is Offered as an Alternate Extension
60
Consecutive Days to Count Sign-in for a Number
7
We have configured the maximum number for sign-in count, and the minimum days to count for.
Also our direct routing rule for opening greeting conversation is set to Sign-In. Not Attempt Sign-In which would recognize the callers extension.
I also ran a report on the two users so far that have reported this issue, and they have not logged into the system any where near 60 times in the last 7 days.
CUC ver. 8.6.2.22028-30
Does anyone have an idea on why certain users are suddenly able to bypass entering their ID?
Thanks,
Steve

Hi Steve,
That does seem odd. I would leverage this COS setting that would at least eliminate
the possibility of "User added" Alternate extensions as a first step
This functionality is available to users who belong to a class of service with the Allow Users to Manage Their User-Defined Alternate Extensions option enabled. (set this to disabled)
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/administration/guide/8xcucsag130.html#wp1106207
Then keep an eye to see if any more of these creep up. I had a long look for related bugs
and didn't come up with any.
Cheers!
Rob
"Why not help one another on the way" - Bob Marley

Similar Messages

Learning Extension for CS4

I apologize if this has been asked before. My old version of Flash had a free learning extension. Is there a free learning extension for CS4? For example, drag and drop, etc.
Thank you for your help.
Mark

FWIW, the performance of PatchPanel was nothing to write home about...
If you need Flash UIs in CS3 and CS4, you can run a swf inside a ScriptUI container using callbacks.
If you want to go that way, and need debug OWL plugins, send me a PM...
Harbs

Cisco Unity Connection. TLS for IMAP client connections

Hello!
I have CUCM 8.6.2.21900-5, CUC 8.6.2ES44.22900-44, CUP version: 8.6.3.10000-20, CUPC version: 8.6.2.20563-1.1.140
Now CUPC successfully connect to mailstore by IMAP. But I want to configure Transport Layer Security for IMAP client connections in order to protect user passwords.
I have read these guides:
http://www.cisco.com/en/US/products/ps6509/products_configuration_example09186a0080b94d12.shtml
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/administration/guide/8xcucsag175.html
Problem is that CUC doesn't listen port 993 (see attachment), so i cant configure CUPC to connect by TLS. I have tried to configure CUPC connect to port 143 by TLS or SSL. CUPC successfully work and indicate that it use TLS, but it transfer password to CUC as plain text!
So how I can enable IMAP over TLS in CUC?
Thanks in advance!

Hello!
Problem is unresolved. I have read your article.
Check the
Allow Users to Use Unified Client to Access Voice Mail box. This allows access to port 7993 and TLS for the CUPC >> client support.
Check the
Allow Users to Use Unified Client to Access Voice Mail box. This allows access to port 7993 and TLS for the CUPC client support.
CUC doesn't listen port 7993 or 993
I have tried CUPC 8.6.3

Unity Connection 9.1.2 - MS Exchange 2013 support for Single Mailbox?

Hello,
we are currently running a unity connection system in version 9.1.2TT1.11900 together with single mailbox enabled with our Exchange server in version 2007.
We are now planning to upgrade the exchange server to version 2013. From my understanding Exchange 2013 is supported with CUCN 9.1.2 (see http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/9x/design/guide/9xcucdgx/9xcucdg020.html).
When i go to the configuration screens I cannot choose Exchange 2013 ... Is there a special way to configure this or is 2013 not supported with Unity connection 9.1.2 ?
any hints ?
Michael

Exchange 2013 is supported.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/9x/unified_messaging/guide/9xcucumgx/9xcucumg020.html#17832
If you choose to allow Unity Connection to search for Exchange servers, then you need to select from the following two options:
– Exchange 2007 and/or 2010: Unity Connection can access every mailbox in the Exchange organization consisting of Exchange 2007, Exchange 2010, and Exchange 2013.
– Exchange 2003, 2007 and/or 2010: Unity Connection can access every mailbox in the Exchange organization consisting of Exchange 2003, Exchange 2007, and Exchange 2010. When the Exchange organization includes Exchange 2003 servers, Unity Connection always communicates directly with the Exchange back-end servers, it never communicates with Exchange front-end servers.
The drop down does not state 2013 but it will work fine for 2013..

Can't create a MWI using primary extension for a user having an alternate extension in Unity Connection 10.5.1

In Unity Connection 10.5.1...
Why can't I create a MWI specifying UsePrimaryExtension (true) when the user as an Alternate Extension defined?
The CUPI interface responds with:
DATA_EXCEPTION
The CUALS interface responds with:
com.cisco.unity.cuals.CuDbException: A subquery has returned not exactly one row
BTW: If I make the same request for the same user after deleting the Alternate Extension, the create MWI request works as expected.
Thanks,
--Rick

Exception initializing 'oracle.dbtools.raptor.MonitorJDBCAddin' in extension 'Oracle SQL Developer': oracle.classloader.
util.AnnotatedNoClassDefFoundError:
Missing class: oracle.jdbc.OracleDriverThe Oracle driver is not on the classpath.

Unity Connection 7 with overlapping extension

Hello everybody,
I'm deploying a CUCM 7.1.3 + Unity Connecion 7.1.3 to a customer, and I have a doubt when using overlapping extension. As it's a large environment, he has overlapping extension number in his multiple sites. For example, both SiteA and SiteB have the extension range 8XXX. In CUCM I have configured some translations patterns, so that an user from SiteA should dial 118XXX in order to reach SiteB, and an user in SiteB should dial 218XXX in order to reach site A. And each site has its own line partition to extension numbers. And everything works fine...
But these users are all in the same Unity Connection Server. So I would have users from SiteA and SiteB with the same extension in Unity Connection, and I can't do that. What I know can do is to configure some partitions from SiteA and SiteB in CUC, and put each subscriber in one partition, right?
But when a user wants to reach the voice mail to get his messages, how Unity Connection knows from which location is he?
Please, anyone could advise me how can I proceed with this configuration?
Thank you!!!

Hello,
I workarounded my problem creating multiple VM Profiles, and assigning a diferent Voice Mail Box Mask for each. And in Unity connection I created a alternate extension for each user.
For example... the extension 6000 from SiteA has the VM Profile VM_SiteA, which has the voicemail box mask 11XXXX. And this user in Connection has the alternate extension 116000. And the extension 6000 from SiteB has the VM Profile VM_SiteB, which has the voicemail box mask 21XXXX, and this user has this number as alternate extension as well (216000)... It works fine like this.
But actually I haven't tested the MWI... If I have a translation pattern in CUCM that translates 11XXXX to XXXX (in partition from SiteA), and another 21XXXX to XXXX (in partition from SiteB), and configure the MWI extension in Connection to be 11XXXX and 21XXXX, will it work? Have anyone already tested this?
Thank you very much!!!
Bruno

Jabber for Windows and Unity Connection Voice mail out of sync

Hello all,
Now that Jabber is pretty much part of every install you begin to notice some trends. One trend that I have noticed happening across several of customers is complaints about Jabber and the Voicemail server getting out of sync. It’s never really been a wide spread issue but it has be noticed by several of my customers enough so that I’m reaching out to see if others are experiencing the same problem. Here are the symptoms, a person sitting at their desk they have a physical phone, and a windows PC running Jabber 4 Windows. They miss a call and the MWI lamp gets lit on the phone but not on Jabber. When you click on HELP / Show Connection status, you see all green checks, and Voicemail shows connected from Jabbers standpoint. When you exit the application and come back in, then it sync’s back up just fine. I have never seen it happen myself, but to be honest I’m never at my desk enough to even notice if my phone lamp is lit.
Anyway has anyone had similar issues? If so is there a fix?

Symptom:
User logged in Jabber and do not log-off/sign-out for more than 24 hours and then jabber does not receive new voicemails from Unity Connection. User will be able to receive voicemails from other interfaces like Outlook, TUI but voicemails will not show up in Jabber.
Conditions:
User does not sign out from jabber for more than 24 hours since last log on.
Workaround:
Sign out from jabber at-least once a day and sign-in back so that subscription will not expire in Unity Connection database.
Voicemail does not sync if Jabber left logged in for more than 24 hours
CSCuo46274
Can be fixed, depends on releases, TAC offered me a fix in version 10.5(1)ES29

Unity Connection 8.6 call transfer to non-unity extension

I have converted from Unity to Unity Connection and am looking for a solution for transferring an incoming call to a non-unity user extension.
Here is the scenario: An PSTN caller calls in and is directed to a Unity Connection Call Handler or a Subscriber greeting. In the greeting they are advised that if they know the extension they want to call, they can dial it at any time. Here is the rub, if they dial an extension for a user listed in Unity Connection, the call gets transferred to the extension. However, if the extension dialed is to an extension that is not a Unity Connection User, the attendant comes back and say the extension is not understood.
In Unity before conversion, I would make an internet user that did not have a mailbox but was listed with an extension. However, with Unity Connection, I am using LDAP integration with Microsoft AD and I don't see a method of doing the same thing.
Is anyone else doing something like this or know of a method to do it?
Thanks in advance.
Gene Keel

In the greeting check this box:
Allow Transfers to Numbers Not Associated with Users or Call Handlers
also make sure the number entered by the call is allowed in Default System Transfer restriction table.

Issue with transferring calls to VM for the correct DN Unity Connection 9.1.2

Hi all
I have been facing an issue with a Unity Connection Server v9.1.2. Every time an internal extension (assigned to VM profile and to Unity as a user) which is configured to be transferred to VM after 20 sec or so NoAN,is called , Unity treats the call as the extension of the calling party and not the called party. Furthermore , I dont know if this has any relation with the problem I am facing but when I check the voicemail port status in RTMT its seems like that regardless it is a direct call to the Unity from an extension (dial the pilot number or press the messages button on the IP phone) or a redirected call from an extension to Unity due to NoAN configuration, the Reason is Direct and the caller party number is always the extension initiated the call and not the one redirected to the Unity (second case).
I have changed the Use Last (Rather than First) Redirecting Number for Routing Incoming Call Unity parameter in the
System Settings > Advanced >Conversations -> checked and
Redirecting Diversion Header Delivery - Outbound CUCM parameter ->checked
in the SIP Trunk configuration used for the integraton of the CUCM with Unity but none of those seem to address this issue. Is there any guidelines you can give me to overcome this issue?
The servers I am using are
CUCM v9.1.2 BE
CUC v9.1.2 BE
Thank You in Advance

Hello again,
The Voice Mail Box Mask was blank before. However I tried XXXX (I use 4-digit extension for the VM pilot) but this did not seem to fix anything to the system....Same situation as before. Any more suggestions?
Thank you

Want to understand the Difference between Attempt sign in and sign in in Unity Connection

I would like to understand the difference between Attempt sign in and sign in in Unity Connection.
If I do a direct routing rule to attempt sign in and another routing rule directly to sign in, what would be the difference for the caller (inside caller with or without voicemail and also outside caller with or without voicemail)? Thank you! Lise

Attempt Sign-In—Sends the call to the user sign in conversation, if the calling number belongs to a user. The calling number is used as the ID. If the call is not from a user, the next rule in the routing table is applied to the call information.
Sign-In—Sends the call to the user sign in conversation, which prompts the caller to enter an ID.

Unity Connections remote call sign-in issue.

I have some users that when they dial there DID from outside they hit there VM press star and are prompted for their sign-in number and pin. Then I have some users that do the same thing, but the greeting just continues to play. I am sure there is a simple fix to this, but I cannot seem to find it. Hoping someone out here can lead me in the correct direction.
I am running Unity Connection 8.6.2.
Thanks in advance,
Dave

Hi Dave,
I would check the following on a "working" vs "non-working" user;
User> Edit> Caller Input> * (star)> send to Sign-in
Cheers!
Rob
Please support CSC helps Kiva
https://supportforums.cisco.com/blog/12122171/cisco-support-community-helps-kiva

Unity Connection 8.5 | Prepend Digits to Dialed Extensions overlap with an option in a call handler

Hi,
One customer has requested to set up a call handler in Unity Connection 8.5. The call handler should be capable of transfering calls to IP phones by dialing the last 4 digits of the IP phone's extension. The last 4 digits of the extension from all IP phones begin with 12. However, the customer is also requesting to have an option on the same call handler, so that if users would dial 1, the call is transfered to an IP phone
As you can see, there is an overlap between the last 4 digits of all IP phone's extensions, and an option in the call handler. Therefore, if I configure both options in the same call handler, when the users would press 1, Unity Connection will immediately send the call to the extension setup for option 1, even if the user wants to dial the last 4 digits of an IP phone extension
One possible solution would be to change the option in the call handler to transfer the call to an IP phone, to something different than 1. However, the customer wants to have this transfer to be performed when he press option 1
Is there any other possible solution for achieving this?
Thanks in advance

I don't see any problem, just don't check the option to ignore additional input when configuring caller input on digit 1
By default CUC will give you 1500 ms to dial for any other digits before trying to route the call with whatever you dialed.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Unity Connection 8.6 not able to forward from extension (dial out)

Dear all,
I'm having a problem at a customer where i'm not able to forward calls externally from the Unity (that's a wish too).
Basically here is the request for which I'm having an issue:
- I'm making a menu with a number XXX (CTI Port) with a System Call Handler
- Under that menu i've 3 choices which points to 3 internal numbers (YY1, YY2, YY3) (CTI Ports).
- All the CTI Ports are forwarded to international numbers which are the final destination
So the flow is the following:
NOT Working
- XXX --> Choice 1 --> YY1 --> Forwaded all to 000countrycode
Working
- XXX --> Choice 1 --> YY1 --> Forwarded all to 444 (internal number)
The strange thing is that I tested everything when I was on site by calling internally XXX from an internal number and it was able to forward all my call to the international number ...
If anyone have a clue about what I can do, I'll appreciate a lot ...
Thanks in advance
C.

Hi Taranjit,
The rules are not made to enable unity to dial out, my goal was to permit only internal calls, but in this specific case, the internal number, is a CTI Port forwarded all to the external international number...
I tried the Unity connection system handler from a internal phone and it was working perfectly, but not if the call is coming from outside apparently.
Kind regards
Christophe

Licensing for Unity Connection after Upgrade from 8.5 to 9.1.2

I upgraded my Unity connection from 8.5.1 to 9.1.2. ( my CUCM is still on 8.5.1) . I have 200 CUWL-STD ( 2200 DLUs), and 50 CUWL-PRO (850 DLUs) . Now I am working with Cisco to get a license file for Unity Connection and apply that to my ELM. I attached my licensing page for when I was in 8.5.1 . Just want to make sure if I will be getting enough license with that license file, or possibly I need to buy more. Someone told me that if I want to have users with mailbox I need to order more licenses since every user take one CUWL license.
Honestly i do not know how CUWL licensing work regardig to Unity or even CUCM.
Thanks,

Hi,
The following link provides details of licenses usage by diff endpoints on version 9.x
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/uct/9_1_1/CUCM_BK_U0AE00F5_00_uct-admin-guide/CUCM_BK_U0AE00F5_00_uct-admin-guide_chapter_0100.html
HTH
Manish

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

As note already on the iBA forum [ AppleID for ibooks publishing ], you need two IDs. You can't use your developer ID.
If you already signed up for books with that ID, you need to talk to Apple to straighten things out.

Unity Connection Learning Extension for sign-in

Similar Messages

Maybe you are looking for