Unity Connection Voice Mail ports

Hi experts
I hava simple question.
I have a UCS M3BE server with 2 CPU, as per the link http://www.cisco.com/en/US/docs/voice_ip_comm/connection/9x/supported_platforms/9xcucspl.html#wp810181 with 2 No's of CPU it supports only 100 ports per Virtual Machine and for the cluster it supports 200 ports.so in the CUCM Voice Mail Port Wizard i shld put figures 200 or 100??,
i think i shld put voice mail ports 100 on CUCM with name CiscoUM1-VI with 100 ports when selecting ports on CUC-publisher
then again creating voice mail ports 100 on CUCM with name CiscoUM2-VI with 100 ports when selecting ports on CUC-subscriber
Thanks

Hi Jack,
Can you try installing the cop file from the following link
https://supportforums.cisco.com/community/netpro/collaboration-voice-video/unified-comm-application/blog/2013/04/17/unity-connection-911-unable-to-create-more-than-8-ports
Although this bug fix is for installations with one CPU you can give it a try.
HTH
Manish

Similar Messages

Unity Connection Voice Mail Issue

Hi,
I have a weird Unity Connection Voice Mail issue and would appriciate any help i can get. Many thanks in advance.
I have Unity connection 7.0 and CUCM 7.0 integrated in a lab enviroment and here is what happens.
When I place a call internally say from 2001 to 2002, things work as expected, 2002 rings and it goes to voicemail where I can leave voicemail and listen to it from 2002.
However, if I place call from the PSTN to the same number 2002 (or any other number in other sites etc) the call again rings in 2002 and goes to voicemail, unity cnx plays the greetings for 2002 and says record your message as usual. Everything up to point is fine, then when the time on the PSTN phone is showing around 14 seconds into the call unity starts playing, "to send this message press one", if I press one nothing happens.
I have rebuilt unity and cucm, even just configured the bare minimum in the lab and still getting the same result. I tried calling from E1 connection and T1 connection but with the same results.
I have run out of ideas...
===============================
Here is a call trace from an internal call:
CallData, 1, CallerId=2003, CalledId=2002, RedirectingId=2002, Origin=16, Reason=4, CallGuid=8B7859FD6C16417A9A07F507418DD25B, CallerName=, LastRedirectingId=2002, LastRedirectingReason=4, PortDisplayName=PhoneSystem-1-001
Application, 1, 2003, AttemptForward
State, 1, 2003, State - AttemptForward.cde!Dummy
State, 1, 2003, Event is [NULL]
Application, 1, 2003, PHTransfer
State, 1, 2003, State - PHTransfer.cde!LoadInfo
State, 1, 2003, Event is [TrueEvent]
Application, 1, 2003, PHGreeting
State, 1, 2003, State - PHGreeting.cde!PlayGreeting
Display, 1, 2003, Call answered if needed
Display, 1, 2003, Playing greeting for Subscriber: hq2
Display, 1, 2003, No DTMF received
Display, 1, 2003, Playing greeting for Subscriber: hq2
State, 1, 2003, Event is [RecordMsgEvent]
State, 1, 2003, State - PHGreeting.cde!RecordMsg
State, 1, 2003, Event is [NULL]
State, 1, 2003, State - PHGreeting.cde!RunEditMsg
Application, 1, 2003, -->MessageEditing
State, 1, 2003, State - MessageEditing.cde!CheckMsgMenuOpt
State, 1, 2003, Event is [EditMessageMenuEvent]
State, 1, 2003, State - MessageEditing.cde!PlayEditMenu
State, 1, 2003, Event is [HangupEvent]
State, 1, 2003, State - MessageEditing.cde!CheckMsgLength
State, 1, 2003, Event is [ManyEvent]
State, 1, 2003, State - MessageEditing.cde!SendMsg
State, 1, 2003, Event is [TrueEvent]
State, 1, 2003, State - MessageEditing.cde!ConfirmSend
State, 1, 2003, Event is [HangupEvent]
Application, 1, 2003, <--MessageEditing
State, 1, 2003, Event is [HangupEvent]
Display, 1, 2003, Idle
Display, 1, , Dialing (MWI) '2002'
Display, 1, , Idle
and here is a trace from an external (PSTN) call
Trying 142.100.64.13, 5000 ... Open
CallData, 1, CallerId=911, CalledId=2002, RedirectingId=2002, Origin=16, Reason=4, CallGuid=CA3DFD90846C4FE7B0D68298A7698287, CallerName=PSTN Emergency, LastRedirectingId=2002, LastRedirectingReason=4, PortDisplayName=PhoneSystem-1-001
Application, 1, 911, AttemptForward
State, 1, 911, State - AttemptForward.cde!Dummy
State, 1, 911, Event is [NULL]
Application, 1, 911, PHTransfer
State, 1, 911, State - PHTransfer.cde!LoadInfo
State, 1, 911, Event is [TrueEvent]
Application, 1, 911, PHGreeting
State, 1, 911, State - PHGreeting.cde!PlayGreeting
Display, 1, 911, Call answered if needed
Display, 1, 911, Playing greeting for Subscriber: hq2
Display, 1, 911, No DTMF received
Display, 1, 911, Playing greeting for Subscriber: hq2
State, 1, 911, Event is [RecordMsgEvent]
State, 1, 911, State - PHGreeting.cde!RecordMsg
State, 1, 911, Event is [NULL]
State, 1, 911, State - PHGreeting.cde!RunEditMsg
Application, 1, 911, -->MessageEditing
State, 1, 911, State - MessageEditing.cde!CheckMsgMenuOpt
State, 1, 911, Event is [EditMessageMenuEvent]
State, 1, 911, State - MessageEditing.cde!PlayEditMenu
State, 1, 911, Event is [HangupEvent]
State, 1, 911, State - MessageEditing.cde!CheckMsgLength
State, 1, 911, Event is [NULL]
Application, 1, 911, <--MessageEditing
State, 1, 911, Event is [NULL]
State, 1, 911, State - PHGreeting.cde!AfterMsg
State, 1, 911, Event is [NULL]
Display, 1, 911, Idle

Sounds like one way audio from PSTN to your Unity Connection, couple of things to check:
1. ensure your protocols are bound properly on the GW, i.e. SIP/H323/MGCP
2. Make sure IP routing is OK between Unity and the voice gateway
HTH,
Chris

Unity Connection Voice Mail Only- NO MWI template

I am deploying a site with 8,000 mailboxes. 4,000 of those users are voice mail only without a telephone and will NOT require MWI.
I can manually remove the MWI setting from each mailbox, but I am looking at either a BATCH CSV setting or a TEMPLATE that I can turn OFF mwi when creating the users.
Any ideas?
TIA

Hi there,
This setting change is available via Bulk Edit
Bulk Edit> Messages> Disable MWI functionality for this user
Bulk Edit changed in 8.x from where it was accessed in 7.x.
Here's a clip that speaks to how this is run now. You first search and select all
the users you want to change and then choose Bulk Edit;
To Edit User Account Information in Bulk Edit Mode (some editing from original > this example
is for Caller Input settings but you'll see the point)
Step 1 In Cisco Unity Connection Administration, on the Search Users page, check the applicable user check boxes, and select Bulk Edit.
If the user accounts that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable users. Then select Bulk Edit.
Step 2 On the Edit Caller Input page, change settings as applicable.
Note The Status message at the top of the Edit Caller Input page tells you how many user accounts are being edited. Also note that the page is populated only with the fields that you are allowed to edit in bulk mode, and that the fields available for edit also depend on whether all of the user accounts reside on the local server.
Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.
Step 4 Select Submit.
Step 5 If applicable, continue to change settings for these user accounts on the related pages available from the Edit menu. As you make changes on each page, select Submit before going on to the next page to make additional changes.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/user_mac/guide/8xcucmac090.html#wp1049545
Try a couple of test users first to come up with the exact plan.
If you prefer you can also use Bulk Edit via .csv
As a test here I tried the Bulk Edit and chose;
User with Voicemail > Users referenced in this CSV file > Next
This then allowed me to browse to an existing "basic" .csv that I had
used to create a test user recently when playing with BAT. In this .csv
I had one user named Bob Uncle with DN/ext 5126. So when I used this method
the Bulk Edit tool (smart puppy ) selected only Bob Uncle for my edit choices
and I was able to change the Disable MWI functionality for this user
Again, please try manipulating some test users to perfect
your methodology.
I have attached the test .csv I used
Cheers!
Rob
Attachments: buncletest Mailboxes.csv.zip (255 bytes)
"Show a little faith, there's magic in the night" - Springsteen

Jabber for Windows and Unity Connection Voice mail out of sync

Hello all,
Now that Jabber is pretty much part of every install you begin to notice some trends. One trend that I have noticed happening across several of customers is complaints about Jabber and the Voicemail server getting out of sync. It’s never really been a wide spread issue but it has be noticed by several of my customers enough so that I’m reaching out to see if others are experiencing the same problem. Here are the symptoms, a person sitting at their desk they have a physical phone, and a windows PC running Jabber 4 Windows. They miss a call and the MWI lamp gets lit on the phone but not on Jabber. When you click on HELP / Show Connection status, you see all green checks, and Voicemail shows connected from Jabbers standpoint. When you exit the application and come back in, then it sync’s back up just fine. I have never seen it happen myself, but to be honest I’m never at my desk enough to even notice if my phone lamp is lit.
Anyway has anyone had similar issues? If so is there a fix?

Symptom:
User logged in Jabber and do not log-off/sign-out for more than 24 hours and then jabber does not receive new voicemails from Unity Connection. User will be able to receive voicemails from other interfaces like Outlook, TUI but voicemails will not show up in Jabber.
Conditions:
User does not sign out from jabber for more than 24 hours since last log on.
Workaround:
Sign out from jabber at-least once a day and sign-in back so that subscription will not expire in Unity Connection database.
Voicemail does not sync if Jabber left logged in for more than 24 hours
CSCuo46274
Can be fixed, depends on releases, TAC offered me a fix in version 10.5(1)ES29

Voice Mail Port Problem with CUCM 8.5 and Connection 8.5

Hi im having a very strange problem witch the voice mail ports between a CM 8.5 and a Cisco Unity connection 8.5 , i configured them and they registered and all was working fine, however when i rebooted the servers the ports stayed in status unknown i tried resetting them both sides, re adding config both sides and nothing after hours of trying and deleting and adding the same config it worked again, however we have a power outage today and the same thing happened again status unknown and still i cannot get them to register again. Any ideas or help would be appreciated.
Thanks,

I'm not sure but it could be a DNS issue. Is DNS configured or are you just using IP addresses? Make sure everything is resolving correctly.

Voice Mail Ports Rejected in CUCM - Unity Connection

Hi to all,
I have a CUCM v9.1 cluster (1 Pub and 2 Subs) with two device pools (DP_Site_A and DP_Site_B), each DP has a call manager group that has the Subscriber for each site as the Primary CUCM Server in order of registration: DP_Site_A -> CMGroup_A ( 1° Sub_A and 2° Sub_B) ,
DP_Site_B -> CMGroup_B ( 1° Sub_B and 2° Sub_A).
The issue that I have is that when I configure the voice ports in the CUCM with either DP_Site_A or DP_Site_B I always get those ports as "Rejected" in the registration status BUT if i leave the DP for the voice ports as default they get registered and actually work fine with voice mails.
My Unity Connection is v9.1 too.
Any ideas about what can be causing this behavior??
Thanks in advance for your help.

Hi Alfonso,
Can you check these settings in CUC for the "Secondary" CUCM (Sub) server config
to make sure the Subs are listed as part of the SCCP registration;
Step 32 On the Edit Servers page, do the following substeps if the Cisco Unified CM cluster has secondary servers. Otherwise, skip to Step 33.
a. Under Cisco Unified Communications Manager Servers, click Add.
b. Enter the following settings for the secondary Cisco Unified CM server and click Save.
# Table 6-16     Settings for the Cisco Unified Communications Manager Servers
# Field
# Setting
# Order
# Enter the order of priority for the Cisco Unified CM server. The lowest number is the primary Cisco Unified CM server, the higher numbers are the secondary servers.
# IP Address or Host Name
# Enter the IP address (or host name) of the secondary Cisco Unified CM server.
# Port
# Enter the TCP port of the Cisco Unified CM server that you are   integrating with Cisco Unity Connection. We recommend that you use the   default setting.
# TLS Port
# Enter the TLS port of the Cisco Unified CM server that you are   integrating with Cisco Unity Connection. We recommend that you use the   default setting.
# Server Type
# Click Cisco Unified Communications Manager.
http://www1.cisco.com/en/US/docs/voice_ip_comm/connection/7x/integration/cucm_sccp/guide/cucintcucmskinny050.html
Cheers!
Rob
"Talk about a dream
Try to make it real"
- Springsteen

Cisco Unity 7: Voice mail cann't get the name or Number phone of the caller

Hi,
I have installed Cisco Unity Messaging Unified version 7 and integrated with Exchange 2010.
I have two scenario, and I want to know if are normal or not:
1. If the 2 IP phones are subscribed with Cisco Unity: the first IP phone call the other IP phone and let a voice mail. When the second IP phone check his message vocal it can get the name of the caller or his number phone (the message is: You have One message from XXXX) and he get e-mail as objet: Voice Mail from XXXX.
2. If one IP phone is not subscriber with cisco unity call other Ip phone subscribed with cisco unity and let him a voice mail. The second IP phone when check his message vocal it can’t get the name of the caller or his number phone: The message is: You have one voice mail xxxx; without indicate from!! and he get a e-mail as object: Voice mail from Unknown.
Please, I want to know if the second scenario is normal ? if not, who to resolve this problem? I want that he indicate the number of caller same he isn't subscriber with cisco unity?
Thanks a lot,
Best regards,
Omar YUNSI

So for the 2nd scenerio you would want to check what your Message Subjects were set to. For Unity 7 open Web SA, click Configuration and then Message Subjects. Make sure that the Outside Caller Message has %CALLERID% in it somewhere. The value %CALLERNAME% will return unknown if we do not receive a name from the PSTN.
Try setting the Outside Caller Message to:
%U% %P% Voice Message from %CALLERID%
and that should get you your desired results.
The default Message subject is:
%U% %P% Voice Message from %CALLERNAME% (%CALLERID%). So with that it would say Voice Message fom Unknown (xxxx) if it was not able to determine the name of the user which is usually normal from a PSTN call.
Just to note, the From address is always going to say from Unity Messaging System, it will only be the subject that has the extension in it.
Bryan

Unity connections 9.1 "port stuck with call"

I am seeing this message in the error log: %UC_UCEVNT-3-EvtMiuPortStuckWithCallinfoOnly: for a number of ports. . When I look into the log some of these ports have ben up for a month .
the message is cleared by restarting the port,
This stuck port problem has been around for a long time we had it in ver 7.1, is there any way of making a port reset if it has been stuck on a call for say 24 hours?

Hello chrbradf1,
You can set the amount of time for the watchdog to generate a log when the port would be considered locked, but there is no automatic way of restarting them on the CUC perspective neither on CUCM, there is also no provisioning for Tcl scripting therefore you will have to restart them manually.
Watchdog is under: Cisco Unity Connection Administration> System Settings> Advanced> Telephonny> Port Watchdog Threshold in Minutes.
Port Watchdog Threshold in Minutes
Enter the time, in minutes, that a port can be off hook before it is considered to be locked. When a port reaches this threshold, Cisco Unity Connection logs an error. To review errors, see the Real-Time Monitoring Tool. We recommend a setting greater than 30 minutes.
Default setting: 240 minutes.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/gui_reference/guide/8xcucgrg110.html
Also consider that maximum time is 240000 minimum is 0 and value has to be integer.
Examples:
Value specified (111111111) exceeds the maximum allowable value (24000).
Value specified (0.1111) is not an integer value
Value specified (-1111) is below the minimum allowable value (0).
-David

Unity Express voice mail timing issue.

Hi,
I have installed one uc520 at one of our customer. i configured voice mail but there is one issue with the voice mail timing. Suppose i retrive the voice mail the voice mail prompt is giving the wrong time. Suppose I send a voice mail to a subscriber at 3pm, the voice mail prompt is saying 'message send at 4 pm'.
I checked both cme and cue clock settings and both are showing the correct time.
Can anybody help me on this issue
Regards
Thejas

Are the calls to CUE getting dropped when you dial from an IP Phone at site 1 (callmanager) ?
How is the CME router setup in Callmanager ? Is it added as a regular H323 gateway or a H225 trunk ? Either ways, make sure the gateway registers with the correct IP that is used in Callmanager.
So if CME has a wan ip (a.a.a.a) and a lan ip (b.b.b.b), if you add b.b.b.b as the CME gateway's ip address in Callmanager, then you need to bind the H323 ip address as follows.
interface fa0/0
ip add b.b.b.b
h323-gateway voip bind srcaddr b.b.b.b
Most likely the CME gateway is sending calls to Callmanager using ip address a.a.a.a which is the wan ip, through which it has the default route to Callmanager.
Hope that makes sense!

Unity 7 Voice Mail Message Details

Just wondering if there is a tag in the message that a Unity Administrator can retrieve in order to find out if the message was delivered with an Automated FWD with a future date and time.
We had one user reported that they received an old test message that they sent themsleves from a long time ago but just came up in their inbox. I'm assuming they put a delivery time stamp to reflect a future date and time but they don't remember.
Thanks,
J

So for the 2nd scenerio you would want to check what your Message Subjects were set to. For Unity 7 open Web SA, click Configuration and then Message Subjects. Make sure that the Outside Caller Message has %CALLERID% in it somewhere. The value %CALLERNAME% will return unknown if we do not receive a name from the PSTN.
Try setting the Outside Caller Message to:
%U% %P% Voice Message from %CALLERID%
and that should get you your desired results.
The default Message subject is:
%U% %P% Voice Message from %CALLERNAME% (%CALLERID%). So with that it would say Voice Message fom Unknown (xxxx) if it was not able to determine the name of the user which is usually normal from a PSTN call.
Just to note, the From address is always going to say from Unity Messaging System, it will only be the subject that has the extension in it.
Bryan

ERROR WHILE FORWARDING VOICE MESSAGE FROM NOTES VIEWMAIL TO ANOTHER VOICEMAIL USER IN UNITY CONNECTION

Hello All,
I am facing problem while replying/forwarding or sending a NEW Voice Message from ViewMail integrated with IBM LOTUS Notes 8.5 to the other Voice Mail User Configured in Cisco Unity Connection.The ViewMail Version is 8.0.2 for IBM LOTUS Notes.UC version is 8.x
I have attached the file that displays the error.
From the view mail inbox if i "Right Click" any email and the "Click ON Forward" I am able to forward the Voice Message from the ViewMail to the IBM LOTUS Domino user [ that is forwarding it to EMAIL Account ], but if I try to forward it to unity user is gives "Failure Delivery".
Now when I double click the individual voice mail message in ViewMail account and then click on "Forward/reply/NewMemo" icon available on the individual voice message window that I have opened ,I get an error as stated below
"The remote name could not be resolved error in Notes ViewMail 10.0.0.152e_vmws_gen_property_not_found "
where 10.0.0.152 is the IP-Address of my Unity Connection Server.
Also just for the information I am able to Login into Cisco PCA for alll the users and able to view the Inbox.
I am able to forward the VoiceMessages between Unity Connection users via CISCO PCA without facing any issue.
A Quick Help will be much appreciated .......... :-)
Hasan Jafri

Hello Craig,
After spending sometime on troubleshooting , just for testing purpose I created two new Unity Connection Voice Mail User and configured VMN [VoiceMail for Notes] account on the same lotus Notes.
Interestingly this time I was able to use Reply & Reply to All option to send the Voice Message via VMN. {WORKING JUST FINE,NO PROBLEM WHAT SO EVER ]
But still I am NOT able to use Forward option to send the Voice Messages via VMN.
REPLY WITH HISTORY & REPLY TO ALL WITH HISTORY options are also not working.
This is error that I am getting
"Error in QueryServe in CoreUCClasses 213 at line 336:Vmws:The remote server returned an error:(403) Forbidden
I HAVE CREATED VIDEO RECORDING FOR THIS ERROR & WORKING PART OF THE CONFIG TO GIVE YOU A BETTER IDEA OF THE PROBLEM.
Its 7 MB Recording. I hope you can easily Download.
Also important point is that i don't see any previous error that was accuring during my earlier testing.
Thanks & Regards,
Hasan Jafri

Unity Connection integration with Outlook problem.

Hello,
We deploy CUC 7.1 and we integrate it with MS exchange 2007 and outlook, and we perform the recommended configuration to make the voice mail message to be appeared in both Unity connection voice mail store and to be sent to exchange then appeared in outlook as inbox message, we perform that by choosing Accept and Rely option in Message actions tab.
The customer want when the message accessed from the outlook the MWI on turned to MWI off!!!!!
How can i perform that?
Thanks

Hi Ahmed,
What you are wanting is not available with CUC 7.x "Accept and Relay"
In Cisco Unity Connection 7.1, you can use the accept and relay action to instruct Connection to both deliver each message of a certain type to the user mailbox and forward a copy of the message to the relay address. (This is sometimes referred to as "accept and forward.") This option may be useful for users who regularly use a device that accesses a separate server for messages, such as a handheld wireless device, and want easy access to voice messages both on the alternative device and through the Connection user interfaces. If you choose this option, the user receives two copies of each message. The copies are stored in different message stores, and any actions the user takes on the relayed copy are not reflected on the copy stored in the Connection message store.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsag170.html#wp1091330
You will want to look into CUC 8.5;
New Features for Cisco Unity Connection Version 8.5
• Unified messaging with Microsoft Exchange 2010:
• Voice messages are synchronized with the Exchange inbox.
• MWI and message status are synchronized.
• Secure, private messages, mobile client, and calendar integration for Exchange 2010 are all supported.
• You can enable unified messaging for specific users or all users.
From this doc;
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps6509/data_sheet_c78-634096.html
Cheers!
Rob

Cisco Unity Express 8.6.6 Voice Mail not deleting when e-mail with attachment deleted

I have a Cisco Unity Communications Manager rel 9.1.2 that supports a remote location with a Unity Express rel 8.6.6 voice mail service module in the voice gateway to insure if WAN goes down the location still has voice mail. We have Voice Mail to E-Mail working. The problem is that when the e-mail with the voice mail is deleted the message stays in the Unity Express Voice Mail Box. All of our local users on the same Call Manager Cluster using a local Unity Connection Cluster rel 9.1.2 have the voicemails deleted when the e-mail is deleted.
How can I resolve this issue?

Found another post that referenced Cisco Bug ID CSCti37610.
CUC plays message is from Unity Connection Messaging system
Symptom:Before message playback, Unity Connection plays the message is from Unity Connection Messaging System instead sender's ANI
Conditions:Problem was observed on Unity Connection cluster and appropriate services are not rebooted after changing the SMTP domain name
Workaround:
Restart the Unity Connection servers
It should have been fixed in 8.5 but we did change the SMTP domain name on 8.6 and now see the problem. Will schedule a reboot and see if the issue goes away.

Voice command in Cisco Unity Connection

I'm currently using Unity Connection 8.5.1 with Cisco Unified CallManager version 7.1.5. I'm trying to see where I can make sure our Class of Service is correct for the Unity Connection voice command and am unable to find anything. Can anyone point me in the right direction?
Thank you
Jim

On the Edit Class of Service page, under Licensed Features, check the Allow Access to Advanced Features check box, and then check the Allow Users to Use Voice Recognition check box.
HTH,
Chris

Voice Mail Device Status is Unknown

My Voice Mail Port: CiscoUM1-VI1 has a status of Unknown, with the IP registered as 10.0.1.2 (Unity)
I'm at a loss as to why its at this.

If it's just 1 port and you've already tried resetting it countless times, chances are you'll need to reboot Unity to get it registered again.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Unity Connection Voice Mail ports

Similar Messages

Maybe you are looking for