UNIX user with Oracle software group settings

I am seeking help on this issue.
When I installed Oracle 10g on Solaris 9 sparc box, I created user oracle and assigned oracle user to primary group Oinstall and second group dba. Then installation went successful. After that, I created another user ccmm and assigned ccmm to dba group. Then I created some UNIX scripts and SQL scripts stored on system. When I log into server as ccmm user and tried to connect to Oracle database, it failed. If I log in as oracle user and tried to connect to Oracle database, everything runs fine. My purpose is to log in as ccmm user and connect to Oracle database or start Oracle utilities from there. So where is the problem for ccmm user settings? How can I make ccmm user as Oracle database user on UNIX machine? Thanks in advance.

Not sure if I quite understand what you're looking to do, but have you added the 'ccmm' user to the 'oinstall' group?
vi /etc/group
oinstall::101:ccmm
Don't know if that helps ya or not.
g/l

Similar Messages

Authenticating Unix users with LEAP

Scenario : WLAN (AP350 V11.21) with LEAP authentication against an ACS V3.0 server (on W2K). Pre-existing Unix users with traditional Unix-crypted passwords. Usernames with their associated encrypted passwords are successfully imported on ACS database with the csutil utility.
Authorization fails because LEAP uses a derivative of CHAP/MS-CHAP and it needs the plain password on the ACS side.
WLANs are increasingly used on places like educational campuses where Unix is widely deployed. Has anyone found a solution to authenticate Unix users with LEAP?
Thanks in advance

I know it's It's not supported yet. When PEAP is added to Aironet and ACS, this problem will go away. I believe that is happening in ACS 3.1 and some future version of the Aironet software.
An ugly workaround would be to setup User Changeable Passwords. You'd inform people with UNIX accounts that they have an ACS account created, but that wireless will not work for them until they use a LAN-based system to log in and change their ACS password. You could give them the option of using the same password, of course.

Node connectivity,user existence:oracle and group existence:oinstall fail

hi all
i am trying to install Oracle Grid Infrastructure 11g R2 on Oracle Linux Enterprise edition
but while installing the following 3 errors are displaying.
1. node connectivity,
2. user existence:oracle
3. group existence:oinstall fail.
plz can anyone help me out how to resolve the above error?

1. check connectivity to ALL nodes is OK, test ping, test ssh (should be passwordless) ,etc
2. check if the software owner is consistent across all nodes, check the owner id
3. check if the software group is consistent across all nodes, check the group id too
Cheers
FZheng
Edited by: FZheng on May 16, 2011 9:57 AM

Implementing a business process with Oracle software

Hello Oracle community,
I'm new to Oracle software and would like to know which tools from Oracle I need when I want to implement a WSDL based business process. All ressources I would like to access within the scope of the process are described with WSDL and I would like to model the whole process with Oracle software.
I guess that I'll need at least the JDeveloper Suite so the post is hopefully not completely off-topic in this forum.
In particular the questions are:
- Which Oracle Tool can model a business process (and can handle WSDL)
- Which Oracle Tool can implement the technical aspect of a business process (might be the same tool)
- Which Oracle Tool (Oracle 9iAS I guess) will I need to deploy & run the finished business process
- And the last question: does Oracle support BPEL?
I need this informationen for my studies at my university. I hope that someone can point me in the right direction.

Unfortunately the recently announced BPEL (Business Process Execution Language) Designer is available as an IBM Eclipse Plugin, so yes you need to be running the Eclipse IDE to be able to use the BPEL on top of Oracle Application Server (OC4J).
A Jdeveloper plugin for BPEL I guess would be available sometime next year ?

SCCM 2012 Report that shows the users with specific software installed

Hi,
Is there a report in SCCM 2012 that shows the users with specific software installed? The report should show username, machine name and the software name. I am looking for a report that shows the users with the following softwares installed:
1. Adobe(all versions)
2. Photoshop(all versions)
3. MS Project(all versions)
4. MS Vision(all versions)
Regards, Lorin Davis

Take a look at the Asset Intelligence reports in the software section. You may get a list of computers with a product installed, and you might have to use that list to find the primary users based on user device affinity.

Unix flavor with oracle

Hi,
currently our databasese are on AIX, but we plan to purchase new sever of unix except IBM.so colud you please tell en which unix flavor is more compatible with oracle sun solaris or HP unix and we also need list of SAN configuration. thanks a lot in advacne.

Hello,
In our firm we use HP-UX Itanium so, I can tell you that we experienced several bugs with this platform.
Not Oracle bug but hardware and OS bugs.
About the hardware bug, I was not able to patch the database (From 10.2.0.1 to 10.2.0.4) I got an ORA-07445.
After calling Oracle support they quickly answered that I have to change the CPU.
And they were right. One CPU was wrong. The problem was solved after changing it.
The exact error was the following:
ORA-07445: exception encountered: core dump [pxnmove()+33] [SIGSEGV] [Address not mapped to object] [0x97FFFFFFBF3D2EF0] [] []You can have more detail on the Note ID 398526.1 of Metalink.
About the OS bug. It was about de C compiler of HP-UX Itanium.
This issue was so well known that from 10.2.0.3 Oracle delivers pre-compiled module.
You'll find more detail on the Note 386727.1 from Metalink.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Nov 21, 2009 12:03 PM

Using Unix tools with Oracle on Windows

I currently have an Oracle database installed on Windows, but would like to use Unix scripting tools and commands when connecting with my database.
Can anyone advise a good way to configure my system so that I can connect to my database from a Unix-like system?
Thanks in advance!

If getting a unix like system installed is not feasible (or is not an option), use this:
http://cygwin.com/
http://www.cygwin.com/mirrors.html
This is not exactly like running unix tools against the Oracle db, but allows you access to unix type shell for almost all of your unix shell scripting needs.
Message was edited by:
Kamal Kishore

Different users with different Software installed

Hi there,
As I am rebuilding my computer and recovering my user through Time Machine, I suddenly thought about creating two separate users on my machine:
1.- Me: for my day to day usage.
2.- Developer: an account specifically targeted to install apps and/or test stuff.
In the second one I would like to be able to install apps I do not want accessible in the first and viceversa (I literally want to keep them perfectly separated so, in the case I want to rebuild my computer again, I can make a "clean restore" of user 1 while starting from scratch with user 2 to keep installing software and other testing situations.
The questions are:
A) Is this possible?
B) if so, how?
Thanks in advance

Thank you CT :-))
I do believe that would be a very feasible workaround. My fear (or my questions) goes into the following direction:
a) by doing so, are you keeping anything outside of that folder potentially affecting other programs (supposely, uninstalling apps in MacOS is clean, but there are so many apps to "completely uninstall applications" that I wonder if that is true).
b) I am looking for a programmatic solution (your solution definitely seems to be feasible, but I was looking for a system option or similar to make clear split among users within the same computer).
Thank you very much in any case :-))
Jose.

Very Urgent (Unique user Id scenario with Oracle LDAP and SSO)

Unique user Id scenario.
Our oracle LDAP repository is setup for customers to login from different companies. We have a requirement to integrate Oracle LDAP users with Oracle 9iAS portal 3.0.9 Single Sign On. I have two userid with same name on the LDAP from different company. For example userid jsmith from company A and jsmith from company B. Both userid do not exist on Portal Login Server. However, both userids will be created automatically in Login server when LDAP and Portal synchronize user list.
1. How oracle portal will handle such scenario when portal requires unique userid?
2. Can I customize portal login screen? For example when they login they can provide userid, passwd and domain name. Where domain name could be company name.
Let me know if you need more information. Feel free to send direct e-mail also.

Unique user Id scenario.
Our oracle LDAP repository is setup for customers to login from different companies. We have a requirement to integrate Oracle LDAP users with Oracle 9iAS portal 3.0.9 Single Sign On. I have two userid with same name on the LDAP from different company. For example userid jsmith from company A and jsmith from company B. Both userid do not exist on Portal Login Server. However, both userids will be created automatically in Login server when LDAP and Portal synchronize user list.
1. How oracle portal will handle such scenario when portal requires unique userid?
2. Can I customize portal login screen? For example when they login they can provide userid, passwd and domain name. Where domain name could be company name.
Let me know if you need more information. Feel free to send direct e-mail also. The scenario you describe is one addressed by Oracle9iAS Portal Release 2's capability to support multi-company hosting. In that scenario, each company has a separate branch of users represented in the directory information tree, as you describe. In this case, both users may have cn=jsmith, but the rest of the DN provides the distinguishing domain, e.g., cn=jsmith,dc=oracle,dc=com and cn=jsmith,dc=microsoft,dc=com.
Version 3.0.9 also supported multi-company hosting, but it was only an internally used feature and one leveraged by a few early adopters. http://portal.oracle.com is one of our hosted examples of multi-company hosting on 3.0.9.
In 'hosting' mode, the login screen displays a third entry field, as you describe, allowing the company name to be specified.
For a supportable configuration, you should use Oracle9iAS Release 2 if you want to employ hosting mode. However, if you need some solution in 3.0.9, you can probably achieve something acceptable by making a slight modification to ssoxoid.pkb. I'm not entirely sure about this, because I'd have to dig into the code (which should be unwrapped, for customization such as this), but you could have users enter their names like 'jsmith@oracle' or 'jsmith@microsoft'. Then, within the ssoxldap.pkb authenticate_user function, you'd need to have the company name added to the base search base before doing the search. Then, once authenticated, the SSO server and Portal would create shadow entries which are unique 'jsmith@oracle', 'jsmith@microsoft'.
Like I say, I'm not sure if the structure of the ssoxldap.pkb file will entirely support this, but that's your best bet until you get Release 2. There will be a 'Multi-Company Hosting Cookbook' provided with Release 2 that will provide the necessary supplemental information to activate hosting mode. You should understand that setting up hosting mode takes a bit more administration than the default single company mode.
If your portal has already been running a while without the @company names then there will also be the issue of getting all the accounts already created moved over to the @company names.

Oracle Portal Groups Issue

I have an issue with oracle portal groups and privileges. We currently have approximately 150 groups with
hundreds of users assigned to each group. We have delegated a user in each group as a local administrator.
This user has been put into an in admin group that has create user, edit user and delete user privleges.
The problem I have is that any local administrator can create, edit or delete users in any group which
is not what I want. I'd like to know if groups/users in oracle portal/Oracle Internet Directory can be
restricted so they can only create, edit or delete users in their defualt groups only (assigned groups).
I have tried and cannot seem to find a way. Any advice would be greatly appreciated.
Thanks

User management is delegated to the Oracle Internet Directory server through the oiddas application. You may want to ask your question in one of the OiD/SSO forums.
The Oracle White Paper [The Implementation of a Departmental Level User Provisioning Model in Oracle Portal 10g|http://www.oracle.com/technology/products/ias/portal/pdf/admin_security_deptmental_level_delegated_admin.pdf] might help as well.
Thanks,
EJ

How to implement a single user in mutiple AD groups?

Hi all,
I need your help in achieving the following requirement.
1. Security should be applied based on a DeptName from DeptTable For example Department Name= A , Department Name =B, Department Name =C.
2. Also security should be based on Officer Indicator from EmployeeTable= Yes or No.
3. Employee Salary information is grouped into EmpFacts in presentation folder. Only a few users who belong to the group which has access to the folder, should be able to see this folder when they login.
(DeptAOfficerYesEmpFactYesSuper. All the groups which has EmpFactYes are given permissions to EmpFact Folder in presentation Folder)
4. On top of these all the users are classified into Mega and Super users. Mega users should have read only access to dashboards and Super users should be able to edit the dashboards. ( All the groups which are classified as Super are given access to "Edit Dashboard" in Presentation Catalog )
NOTE: As we are deploying our rpd in the shared environment we are not supposed to use SESSION VARIABLES.
TO achieve the above requirement we have created AD groups such that DeptAOfficerYesEmpFactYesSuper , DeptAOfficerNoEmpFactNoSuper and so on. By this method all the permutation and combinations will result in AD groups.
We know that this approach will lead to severe maintenance issues and hence looking for other alternatives.
We are now planning to have only DeptA, DeptB, DeptC groups and use them in conjunction with three other groups ( Officer, EmpFact, Super).
Can we add a single user in all these user groups ?
Kindly let me know if you need any clairty on this.
Your help is highly appreciated.
Edited by: user10682075 on May 11, 2011 7:24 PM

Yes and no..meaning a user with just 1 group assigned will retrieve less data then a user with multiple groups assigned, so yes, more data to select will affecct your performace (a bit), but no, the use of multiple security groups by itself won't affect performance..
The use of multiple security groups will reflect in the use of an IN or a subquery in your logical query, OBI will determine the best way in each case and your database (and statistics) will determine the best physical query and therefore query performance.
M.

How to apply group settings of UDF and UserDefinedValues to all documents ?

I have made many User Defined Fields, category group settings of UDF, and User Defined Values (Formatted search) in a marketing document.
And I want to apply them to all of the marketing documents, that is Sales and Purchase documents,,, all the same.
Is there any way to achieve it?
Thanks in advance...

Thanks,,
This thread it not about setting for different users but for different type of documents.
And is there any way to configure the category settings of UDF for document types by SDK coding?
Edited by: Sung-Su Beck on Nov 29, 2011 7:27 AM

UK Oracle User Group (UKOUG) fires back at suggestion that customers have 'hostile' relationship with Oracle

In a 24 November article in Computing, the United Kingdom’s leading business technology publication, the UK Oracle User Group (UKOUG) differed with the suggestion from the Campaign for Clear Licensing that customers have a hostile relationship with Oracle.

In a 24 November article in Computing, the United Kingdom’s leading business technology publication, the UK Oracle User Group (UKOUG) differed with the suggestion from the Campaign for Clear Licensing that customers have a hostile relationship with Oracle.

How to access oracle with any unix user (like root)?

I installed Oracle 10g on Redhat Enterprise Linux 3.
I created one oracle user, and installed oracle in oracle users home directory. In oracle user I can access oracle very well. But I can not use oracle with other unix users like root. What kind of permissions I need to set to do so?

You should never try to connect to Oracle as root, but if you want to connect as any other OS user, you will need to run ChangePerm.sh in $ORACLE_HOME/install in order to do this. It may not be present until you upgrade above the base release (like 10.2.0.3).
Can not Logon To SQL*Plus as non-Oracle User: Libclntsh.So.10.1: Permission Denied
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=420083.1

Event ID 1085 on DC - Failed to Apply the Group Policy Local Users and Groups Settings

I have a domain with 2 DCs. The primary DC is running Server 2012 and is raising Event ID 1085 every 10 minutes and 20 seconds.
Windows failed to apply the Group Policy Local Users and Groups settings. Group Policy Local Users and Groups settings might have its own log file. Please click on the "More information" link.
System
- Provider
[ Name] Microsoft-Windows-GroupPolicy
[ Guid] {AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}
EventID 1085
Version 0
Level 3
Task 0
Opcode 1
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-10-20T20:09:03.706992400Z
EventRecordID 130087
- Correlation
[ ActivityID] {FDDFB8C5-9ECF-41B9-B2B4-3AD0B345A37A}
- Execution
[ ProcessID] 1000
[ ThreadID] 3280
Channel System
Computer SERVER.DOMAIN.NAME
- Security
[ UserID] S-1-5-18
- EventData
SupportInfo1 1
SupportInfo2 4404
ProcessingMode 0
ProcessingTimeInMilliseconds 10343
ErrorCode 183
ErrorDescription Cannot create a file when that file already exists.
DCName \\SERVER.DOMAIN.name
ExtensionName Group Policy Local Users and Groups
ExtensionId {17D89FEC-5C44-4972-B12D-241CAEF74509}
Everything I look up for Event ID 1085 seems to be about a different cause.
Any ideas?

I enabled tracing on a domain gpo and I still get the error when running gpupdate /force .
I'm also still getting Event 1085. Here's the trace file. I've anonymized the site/domain and the GUIDs.
2014-10-21 11:16:54.003 [pid=0x3e8,tid=0xcd0] Entering ProcessGroupPolicyExLocUsAndGroups()
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] SOFTWARE\Policies\Microsoft\Windows\Group Policy\{GUID-1}
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] BackgroundPriorityLevel ( 0 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] DisableRSoP ( 0 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] LogLevel ( 2 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] Command subsystem initialized. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] Background priority set to 0 (Idle).
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ----- Parameters
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] CSE GUID : {GUID-1}
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] Flags : ( X ) GPO_INFO_FLAG_MACHINE - Apply machine policy rather than user policy
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( X ) GPO_INFO_FLAG_BACKGROUND - Background refresh of policy (ok to do slow stuff)
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_SLOWLINK - Policy is being applied across a slow link
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_VERBOSE - Verbose output to the eventlog
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_NOCHANGES - No changes were detected to the Group Policy Objects
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_LINKTRANSITION - A change in link speed was detected between previous policy application and current policy application
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_LOGRSOP_TRANSITION - A change in RSoP logging was detected between the application of the previous policy and the application of the current policy.
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( X ) GPO_INFO_FLAG_FORCED_REFRESH - Forced Refresh is being applied. redo policies.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_SAFEMODE_BOOT - windows safe mode boot flag
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_ASYNC_FOREGROUND - Asynchronous foreground refresh of policy
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Token (computer or user SID): S-1-5-18
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Abort Flag : Yes (0x313be090)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] HKey Root : Yes (0x80000002)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Deleted GPO List : No
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Changed GPO List : Yes
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Asynchronous Processing : Yes
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Status Callback : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] WMI namespace : Yes (0x32273740)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] RSoP Status : Yes (0x320cc7f4)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Planning Mode Site : (none)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Computer Target : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] User Target : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Calculated list relevance. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ----- Changed - 0
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Options : ( ) GPO_FLAG_DISABLE - This GPO is disabled.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Options (raw) : 0x00000000
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Version : 19267878 (0x01260126)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPC : LDAP://CN=Machine,CN={GUID-2},CN=Policies,CN=System,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPT : \\SITE.DOMAIN\sysvol\SITE.DOMAIN\Policies\{GUID-2}\Machine
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Display Name : Default Domain Policy
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Name : {GUID-2}
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Link : ( ) GPLinkUnknown - No link information is available.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkMachine - The GPO is linked to a computer (local or remote).
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkSite - The GPO is linked to a site.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( X ) GPLinkDomain - The GPO is linked to a domain.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GP Link Error
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] lParam : 0x00000000
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Prev GPO : No
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Next GPO : Yes
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Extensions : [{00000000-0000-0000-0000-000000000000}{GUID-3}][{GUID-1}{GUID-3}][{GUID-4}{GUID-5}{GUID-6}{GUID-7}{GUID-8}][{GUID-9}{GUID-10}][{GUID-11}{GUID-5}{GUID-6}]
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] lParam2 : 0x3146f978
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Link : LDAP://DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Purge GPH : C:\ProgramData\Microsoft\Group Policy\History\{GUID-2}\Machine\Preferences\Groups\Groups.xml
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Read GPE XML data file (592 bytes total).
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ----- Changed - 1
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Options : ( ) GPO_FLAG_DISABLE - This GPO is disabled.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Options (raw) : 0x00000000
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Version : 1245203 (0x00130013)
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPC : LDAP://CN=Machine,CN={GUID-12},CN=Policies,CN=System,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPT : \\SITE.DOMAIN\sysvol\SITE.DOMAIN\Policies\{GUID-12}\Machine
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Display Name : Default Domain Controllers Policy
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Name : {GUID-12}
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Link : ( ) GPLinkUnknown - No link information is available.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkMachine - The GPO is linked to a computer (local or remote).
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkSite - The GPO is linked to a site.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkDomain - The GPO is linked to a domain.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( X ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GP Link Error
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] lParam : 0x00000000
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Prev GPO : Yes
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Next GPO : No
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Extensions : [{00000000-0000-0000-0000-000000000000}{GUID-3}][{GUID-1}{GUID-3}][{GUID-9}{GUID-10}]
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] lParam2 : 0x324e8198
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Link : LDAP://OU=Domain Controllers,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.127 [pid=0x3e8,tid=0xcd0] Purge GPH : C:\ProgramData\Microsoft\Group Policy\History\{GUID-12}\Machine\Preferences\Groups\Groups.xml
2014-10-21 11:16:54.127 [pid=0x3e8,tid=0xcd0] Read GPE XML data file (592 bytes total).
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Completed get next GPO. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] WQL : SELECT * FROM RSOP_PolmkrSetting WHERE polmkrBaseCseGuid = "{GUID-1}"
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Purged 2 old RSoP entries.
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Logging 2 new RSoP entries.
2014-10-21 11:16:54.159 [pid=0x3e8,tid=0xcd0] RSoP Entry 0
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] RSoP Entry 1
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] Completed get GPO list. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] IsRsopPlanningMode() [SUCCEEDED(S_FALSE)]
2014-10-21 11:17:04.252 [pid=0x3e8,tid=0xcd0] Completed settings update (csePostProcess). [ hr = 0x800700b7 "Cannot create a file when that file already exists." ]
2014-10-21 11:17:04.252 [pid=0x3e8,tid=0xcd0] Completed CSE post-processing. [ hr = 0x800700b7 "Cannot create a file when that file already exists." ]
2014-10-21 11:17:04.267 [pid=0x3e8,tid=0xcd0] Leaving ProcessGroupPolicyExLocUsAndGroups() returned 0x000000b7

UNIX user with Oracle software group settings

Similar Messages

Maybe you are looking for