Unknow error

when i compile a code, this error messege will come
Unexpected Signal : EXCEPTION_FLT_STACK_CHECK (0xc0000092) occurred at PC=0x154D152
Function=[Unknown.]
Library=(N/A)
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
Dynamic libraries:
0x76AC0000 - 0x76ADD000 C:\WINDOWS\SYSTEM\IMAGEHLP.DLL
Heap at VM Abort:
Heap
def new generation total 576K, used 343K [0x10010000, 0x100b0000, 0x104f0000)
eden space 512K, 54% used [0x10010000, 0x10055c80, 0x10090000)
from space 64K, 100% used [0x10090000, 0x100a0000, 0x100a0000)
to space 64K, 0% used [0x100a0000, 0x100a0000, 0x100b0000)
tenured generation total 7552K, used 3096K [0x104f0000, 0x10c50000, 0x14010000)
the space 7552K, 41% used [0x104f0000, 0x107f6200, 0x107f6200, 0x10c50000)
compacting perm gen total 4096K, used 2392K [0x14010000, 0x14410000, 0x18010000)
the space 4096K, 58% used [0x14010000, 0x14266058, 0x14266200, 0x14410000)
Local Time = Sat Oct 09 20:10:24 2004
Elapsed Time = 37
# HotSpot Virtual Machine Error : EXCEPTION_FLT_STACK_CHECK
# Error ID : 4F530E43505002EF
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.2_04-b05 mixed mode)
# An error report file has been saved as hs_err_pid4293400361.log.
# Please refer to the file for further information.
Errors compiling lab2.
perform:window 98
java :1.4.2_04

Hi,
I believe you are using MathLib calls. The MathLib (JNI) routines are about half as fast as the Math routines in J2SE 1.3.1?a result of the overhead involved in making a JNI call. Note that when you make numerous calls to the MathLib routines in a tight loop, you sometimes get an exception:
Unexpected Signal : EXCEPTION_FLT_STACK_CHECK occurred at PC=0x9ED0D2
Regards,
Chandra

Similar Messages

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

The Attempt to burn a disc failed. An unknow error occurred (4000)

Itunes will start to burn and then stop and state that
"the Attempt to burn a disc failed. An unknow error occurred (4000)"
while burning a data Dvd back up
Here is the Run CD Diag
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
MSI MS-6712
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Cdr4_xp (7.5.0.50),
UpperFilters: GEARAspiWDM (2.0.4.3), Cdralw2k (7.5.0.50),
Video Driver: NVIDIA GeForce4 MX 440\GeForce4 MX 440
IDE\DiskWDCWD800JB-00ETA0_____________________77.07W77, Bus Type ATA, Bus Address [0,0]
IDE\CdRomJLMSXJ-HD166S__________________________DS1A___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomLITE-ONDVDRW_SOHW-1633S________________BS0K___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: JLMS XJ-HD166S, Rev DS1A
Drive is empty.
E: LITE-ON DVDRW SOHW-1633S, Rev BS0K
Audio CD in drive.
Found 14 songs on CD, playing time 56:45 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 06:28:04
Track 3, start time 09:32:06
Track 4, start time 13:04:38
Track 5, start time 16:57:06
Track 6, start time 20:43:48
Track 7, start time 23:48:03
Track 8, start time 29:28:09
Track 9, start time 34:28:49
Track 10, start time 37:45:69
Track 11, start time 41:23:33
Track 12, start time 44:45:19
Track 13, start time 47:53:52
Track 14, start time 51:19:58
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8 16 24 32 40 48.
The drive DVDRW speeds are: 8 16 24 32 40 48.
The last failed data CD or DVD burn had error code 4000(0x00000fa0). It happened on drive E: LITE-ON DVDRW SOHW-1633S on DVD+R media at speed 16X.
please help
Clone Windows XP

try this...
This is how I managed to fix the problem...and I hope this helps others in the similar situation.
I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
I hope this will help others who are having problems to burn stuff on iTunes.

I Tunes cannot connect to i Tunes store. An unknow error have occurred 0x80090318

Hi I am having this problem for weeks:
iTunes cannot connect to i Tunes store. An unknow error have occurred 0x80090318
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
iTunes 11.4.0.18
QuickTime 7.7.5
FairPlay 2.6.16
Apple Application Support 3.0.6
iPod Updater Library 11.1f5
Apple Mobile Device 8.0.0.23
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
The current local date and time is 2014-10-13 22:33:41.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
No external plug-ins installed.
iPodService 11.4.0.18 (x64) is currently running.
iTunesHelper 11.4.0.18 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
DHCP Enabled: Yes
Lease Obtained: Mon Oct 13 22:25:56 2014
Lease Expires: Tue Oct 14 02:25:56 2014
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2014-07-01 22:20:33.

Have you tried the troubleshooting for that error code on this page : Apple software on Windows: May see performance issues and blank iTunes Store ?
This also appears to have worked for a number of people : error iTunes Store : 0x80090318 (the solution).

HT201210 I am trying to restore my ipod 4th 5.1.1, but when I try itune " the ipod couldnt be restored, an unknow error occured (3194). what should i do??

I am Trying to restore my ipod 4th gen 5.1.1 but when i try to restore it in itunes "The ipod couldnt be restored, an unknow error occured (3194). what should i do?

This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

HT201210 iphone could not restore. an unknow error occurred(2005) in the procces of updating my iphone 3g

i was trying to update my iphone 3g and it display iphone could not restore. an unknow error occurred(2005) in the procces of updating the ios. please i need your help to restore back my iphone 3g. please what can i do to restore it back?

Try to restore the device in DFU mode: http://theiphonewiki.com/wiki/DFU_Mode

I sync the IPhone on windows 8 as always, suddenly ITunes message !Tunes could not connect to this IPhone . An unknow error occurred (OxE8000084).

I sync the IPhone on windows 8 as always, suddenly ITunes message
!Tunes could not connect to this IPhone . An unknow error occurred (OxE8000084).

Read here:
http://support.apple.com/kb/TS3221

Iphone 3G recovery mode; the iPhone cannot be recovered: unknow error 1604

Hi
I was recovering my iPhone 3G at iTunes after creating a back-up.
When I wanted to recover (and update to OS 3.1.3. from 3.1.2) iTunes is turning the iPhone into recovery mode, but after a few minutes the phone is keeping getting the message
the iPhone cannot be recovered: unknow error 1604
There is no futher information about this error. So now I have a non working iPhone
Please help me, what to do
Thanx
Jos from the Netherlands

Lots of Google results for 'iphone error 1604'... http://www.google.com/search?aq=f&sourceid=chrome&ie=UTF-8&q=iphoneerror1604
Here's an Apple doc that may help... http://support.apple.com/kb/ts1275

TS3221 my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

You've managed to permanently damage the phone. As gdgmacguy suggests, buy a new one. Preferably from a legitimate source.
You may also want to keep in mind that it is illegal to use the Gevey SIM in pretty much every country on the planet. It may still be legal on the continent of antarctica, but that's only because penguins don't use cell phones as a rule.

Task failed with unknow error

Hi all,
I made some changes in a mapping. I validated it and checked it in succesfully. When running the task in the dac, it gives me a unknow error. So i ran the workflow in the workflowmanager to see wich errors and warning he come up with. The mapping still fails. See the error log below.
I have bold 5 lines wich i think are important.
The first bold line is a little bit strange, cause a few rows below you see that he can find the parameters from the parameterfile
Anyone have a clue why the task failed? Hope someone can help... tnx in advanced.
Severity     Message
INFO     Starting execution of workflow [SDE_ORA_ProjectCostLine] in folder [Custom_SDE] last saved by user [Edm].
INFO     Workflow SDE_ORA_ProjectCostLine started with run id [135969], run instance name [], run type [Concurrent Run Disabled].
INFO     Workflow [SDE_ORA_ProjectCostLine] service level [SLPriority:5,SLDispatchWaitTime:1800].
INFO     Workflow started. Clients will be notified
INFO     Start task instance [Start]: Execution started.
INFO     Start task instance [Start]: Execution succeeded.
INFO     Link [Start --> SDE_ORA_ProjectCostLine]: empty expression string, evaluated to TRUE.
INFO     Session task instance [SDE_ORA_ProjectCostLine] is waiting to be started.
INFO     Session task instance [SDE_ORA_ProjectCostLine]: started a process with pid [30721] on node [node_ontwikkel].
INFO     Session task instance [SDE_ORA_ProjectCostLine]: Execution started.
INFO     Parameter file [ora0/app/ipc860/server/infa_shared/SrcFiles/Custom_SDE.SDE_ORA_ProjectCostLine.txt] is opened for [session [SDE_ORA_ProjectCostLine.SDE_ORA_ProjectCostLine]].
INFO     *Warning! Cannot find section for workflow [SDE_ORA_ProjectCostLine] and folder [Custom_SDE] in parameter file [ora0/app/ipc860/server/infa_shared/SrcFiles/Custom_SDE.SDE_ORA_ProjectCostLine.txt].*
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [TM_6793 Fetching initialization properties from the Integration Service. : (Wed Nov 17 11:49:58 2010)]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [DISP_20305 The [Preparer] DTM with process id [30721] is running on node [node_ontwikkel].
: (Wed Nov 17 11:49:58 2010)]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [PETL_24036 Beginning the prepare phase for the session.]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [TM_6721 Started [Connect to Repository].]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [TM_6722 Finished [Connect to Repository]. It took [0.214831] seconds.]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [TM_6794 Connected to repository [ontwikkel_repo] in domain [ontwikkel] as user [Administrator] in security domain [Native].]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [TM_6721 Started [Fetch Session from Repository].]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [TM_6722 Finished [Fetch Session from Repository]. It took [0.084069] seconds.]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [TM_6793 Fetching initialization properties from the Integration Service. : (Wed Nov 17 11:49:58 2010)]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [VAR_27028 Use override value [ORA_R12] for session parameter:[$DBConnection_OLTP].]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [VAR_27028 Use override value [Custom_SDE.SDE_ORA_ProjectCostLine.log] for session parameter:[$PMSessionLogFile].]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [VAR_27028 Use override value [9] for mapping parameter:[$$DATASOURCE_NUM_ID].]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [VAR_27027 Use default value [0] for mapping parameter:[mplt_BC_ORA_ProjectCostLine.$$EBS_REQUEST_ID_1].]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [VAR_27028 Use override value [] for mapping parameter:[mplt_BC_ORA_ProjectCostLine.$$HINT1].]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [VAR_27028 Use override value [01/01/1970] for mapping parameter:[mplt_BC_ORA_ProjectCostLine.$$INITIAL_EXTRACT_DATE].]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [VAR_27028 Use override value [06/26/2010] for mapping parameter:[mplt_BC_ORA_ProjectCostLine.$$LAST_EXTRACT_DATE].]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [VAR_27028 Use override value [DEFAULT] for mapping parameter:[$$TENANT_ID].]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [TM_6721 Started [Partition Group Formation].]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [TM_6722 Finished [Partition Group Formation]. It took [0.01092] seconds.]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [PETL_24037 Finished the prepare phase for the session.]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [TM_6792 Notifying the Integration Service that the prepare phase has been completed. : (Wed Nov 17 11:49:58 2010)]
INFO     Session task instance [SDE_ORA_ProjectCostLine] : [TM_6228 Writing session output to log file [/ora0/app/ipc860/server/infa_shared/SessLogs/Custom_SDE.SDE_ORA_ProjectCostLine.log].]
*ERROR     Session task instance [SDE_ORA_ProjectCostLine]: Execution failed.*
*WARNING     Session task instance [SDE_ORA_ProjectCostLine] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_ProjectCostLine] will be failed.*
*WARNING     Workflow [SDE_ORA_ProjectCostLine]: Unable to unlink temporary parameter file [] with error [2] [No such file or directory]*
*ERROR     Workflow [SDE_ORA_ProjectCostLine]: Execution failed.*
-----

Tnx for helping all... you all think is must be something with the parameter file?? This was what i did...
The parameter file was copied from the parameter files the dac has generated. This was from the folder: /ora0/app/dac1013/bifoundation/dac/informatica/parameters
The original file name was: ORA_R12.DataWarehouse.Custom_SDE.SDE_ORA_ProjectCostLine.txt (<connection_source>.<Connection_taget>.<informaticafolder>.<workflowname>)
I changed it to Custom_SDE.SDE_ORA_ProjectCostLine.txt (<informaticafolder>.<workflowname> )and copied it to the folder /ora0/app/ipc861/server/infa_shared/SrcFiles
The file i'm using is posted below.
[Custom_SDE.SDE_ORA_ProjectCostLine]
$$ANALYSIS_END=01/01/2011 12:59:00
$$ANALYSIS_END_WID=20110101
$$ANALYSIS_START=12/31/1979 01:00:00
$$ANALYSIS_START_WID=19791231
$$COST_TIME_GRAIN=QUARTER
$$CURRENT_DATE=08/18/2010
$$CURRENT_DATE_IN_SQL_FORMAT=TO_DATE('2010-08-18', 'YYYY-MM-DD')
$$CURRENT_DATE_WID=20100818
$$DATASOURCE_NUM_ID=9
$$DEFAULT_LOC_RATE_TYPE=Corporate
$$DFLT_LANG=NL
$$EBS_REQUEST_ID_1=0
$$ETL_PROC_WID=21369196
$$FILTER_BY_LEDGER_ID='Y'
$$FILTER_BY_LEDGER_TYPE='N'
$$GBL_CALENDAR_ID=EMC_kalender~21
$$GBL_DATASOURCE_NUM_ID=9
$$GLOBAL1_CURR_CODE=EUR
$$GLOBAL1_RATE_TYPE=Corporate
$$GLOBAL2_CURR_CODE=EUR
$$GLOBAL2_RATE_TYPE=Corporate
$$GLOBAL3_CURR_CODE=EUR
$$GLOBAL3_RATE_TYPE=Corporate
$$HEADCOUNT=In Dienst
$$HI_DATE=TO_DATE('3714-01-01 00:00:00', 'YYYY-MM-DD HH24:MI:SS')
$$HI_DT=01/01/3714 12:00:00
$$HR_ABSNC_EXTRACT_DATE=TO_DATE('1980-01-01 08:19:00', 'YYYY-MM-DD HH24:MI:SS')
$$HR_WRKFC_ADJ_SERVICE_DATE='N'
$$HR_WRKFC_EXTRACT_DATE=01/01/1970
$$HR_WRKFC_SNAPSHOT_DT=TO_DATE('2004-01-01 00:00:00', 'YYYY-MM-DD HH24:MI:SS')
$$HR_WRKFC_SNAPSHOT_TO_WID=20100818
$$Hint1=
$$Hint_Tera_Post_Cast=
$$Hint_Tera_Pre_Cast=
$$INITIAL_EXTRACT_DATE=01/01/1970
$$INVPROD_CAT_SET_ID=27
$$INV_PROD_CAT_SET_ID10=
$$INV_PROD_CAT_SET_ID1=27
$$INV_PROD_CAT_SET_ID2=
$$INV_PROD_CAT_SET_ID3=
$$INV_PROD_CAT_SET_ID4=
$$INV_PROD_CAT_SET_ID5=
$$INV_PROD_CAT_SET_ID6=
$$INV_PROD_CAT_SET_ID7=
$$INV_PROD_CAT_SET_ID8=
$$INV_PROD_CAT_SET_ID9=
$$LANGUAGE_CODE=E
$$LAST_EXTRACT_DATE=06/29/2010
$$LAST_EXTRACT_DATE_IN_SQL_FORMAT=TO_DATE('2010-06-29 00:49:21', 'YYYY-MM-DD HH24:MI:SS')
$$LAST_EXTRACT_DATE_WID=20100629
$$LAST_TARGET_EXTRACT_DATE_IN_SQL_FORMAT=TO_DATE('2010-06-29 00:49:21', 'YYYY-MM-DD HH24:MI:SS')
$$LEDGER_ID_LIST=2022
$$LEDGER_TYPE_LIST='NONE'
$$LOAD_DT=TO_DATE('2010-08-18 19:15:04', 'YYYY-MM-DD HH24:MI:SS')
$$LOW_DATE=TO_DATE('1899-01-01 00:00:00', 'YYYY-MM-DD HH24:MI:SS')
$$LOW_DT=01/01/1899 00:00:00
$$MASTER_CODE_NOT_FOUND=
$$ORA_HI_DATE=TO_DATE('4712-12-31 00:00:00', 'YYYY-MM-DD HH24:MI:SS')
$$PROD_CAT_SET_ID10=
$$PROD_CAT_SET_ID1=1100000061
$$PROD_CAT_SET_ID2=1100000041
$$PROD_CAT_SET_ID3=
$$PROD_CAT_SET_ID4=
$$PROD_CAT_SET_ID5=
$$PROD_CAT_SET_ID6=
$$PROD_CAT_SET_ID7=
$$PROD_CAT_SET_ID8=
$$PROD_CAT_SET_ID9=
$$PROD_CAT_SET_ID=2
$$SOURCE_CODE_NOT_SUPPLIED=
$$TENANT_ID=DEFAULT
$$WH_DATASOURCE_NUM_ID=999
$DBConnection_OLAP=DataWarehouse
$DBConnection_OLTP=ORA_R12
$PMSessionLogFile=Custom_SDE.SDE_ORA_ProjectCostLine.log
Edited by: user565199 on 22-nov-2010 3:50
Edited by: user565199 on 22-nov-2010 3:51

Error in MDDataSetBW.GetCellData. Unknow error (WIS 10901)

Hello to Everybody,
We are working with Business Objects EDGE series XI 3.0 and SAP BW 3.5. We work over Financial Infocubes. Our problem appears when we try to refresh a Profit & (Loss) (CO-PA Query) with more than two periods of time. If we work with one or two periods everything works perfect.
The error:
Error in MDDataSetBW.GetCellData. Unknow error (WIS 10901)
Could someone help us?
Thanks on advance,
Martí

Hi Marti,
could you provide the details on the elements that you included into the query panel for the Web Intelligence report and which items are being used in the report ?
Can you execute a BI query that looks the same meaning that all elements from the web Intelligence query panel need to be in the rows or columns.
thanks
ingo

An unknow error occurred (1602)

my iphone can't restored, an unknow error occurred (1602) can you help ? thank you

Have you researched (i.e. Google) to see what iPhone error code 1602 means? Perhaps you'll get an idea of how to fix it.

WHEN I MAKE A RENDER IT SAY UNKNOW ERROR, PREMIER CS6

WHEN I MAKE A RENDER IT SAY UNKNOW ERROR, PREMIER CS6

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840

There was an error in the app store. Please try again later. (4) Unknow Error when I try to sign in on my Mac book

There was an error in the app store. Please try again later. (4) Unknow Error. I keep getting this message when I try to sign in on my Mac book.
Can anyone help....please

Hi Lu2003,
If you are having issues connecting to or logging in to the Mac App Store, you may find the troubleshooting steps in the following article helpful (it is primarily aimed at the iTunes Store, but similar issues can affect the Mac App Store as well):
Apple Support: Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
- Brenden

HT201210 trying to update my phone and it says cannot update due to unknow error any help

i was trying to update my iphone 4 and it says cannot update due to unknow error any help ?

Hey alyreed22,
Thanks for the question. I understand you are having issues updating to iOS 7. The following articles may help you resolve the error message:
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/TS1275
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Thanks,
Matt M.

"unknow error -42110" What is it?

When conect my iphone using usb, itunes pop a message of unknow error -42110, what is it? i cannot find any explanation in the forum.
I have windows 7, iphone 5 and the last version of Itunes.
Thanks

Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

Unknow error

Similar Messages

Maybe you are looking for