Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.

Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Foundation
Event ID:      5586
Task Category: Database
Level:         Error
Keywords:
User:          DOMAIN\SA account
Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.
The target principal name is incorrect. Cannot generate SSPI context.
This is the error, if often find in my WFE's. I googled for the error and granted DB owner roles for the service account as specified in TechNet, but no luck.
Even same error logs generated on SharePoint logs.
SqlError: 'The target principal name is incorrect. Cannot generate SSPI context.'
Source: '.Net SqlClient Data Provider' Number: 0 State: 0 Class: 11 Procedure: 'GenClientContext' LineNumber: 0 Server: 'servername\SHAREPOINT,4101'
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.
The target principal name is incorrect. Cannot generate SSPI context.
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
System.Data.SqlClient.SqlException (0x80131904): The target principal name is incorrect.
Cannot generate SSPI context.     at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions
userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnecti...
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
Thanks.
Badri

For SharePoint to recognize the SQL server name we provide its name and instance while installing SharePoint. When we are using SQL alias to connect to SQL, we need to configure the same alias on SharePoint server so that SharePoint recognize alias over
the network.
Having SharePoint connect to a SQL Alias instead of the NetBIOS name is always a good idea. The main benefit is, if you ever have to switch the SQL Server or connect to a SQL Cluster VIP address, you just change the Alias to point to the SQL Cluster name
on the SharePoint Server and restart the SharePoint Timer Service and you are good to go.
Please check this blog.
http://blogs.msdn.com/b/priyo/archive/2013/09/13/sql-alias-for-sharepoint.aspx
http://technet.microsoft.com/en-us/library/hh292622(v=office.15).aspx
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

Similar Messages

Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.

SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010

Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Event 3351, SQL database login for 'DB_Config' on instance failed. Additional error information from SQL server is mentioned below. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.

category-database
event id-3351
source-sharepoint foundation
SQL database login for 'DB_Config' on instance 'DB\instance' failed. Additional error information from SQL Server is included below:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
I have been getting this error every hour on only 1 application server of the 2.
My farm consists of 2 app servers, 2 wfes & 2 sql nodes.
My public site is working fine. Authentication is NTLM.
SharePoint VSS Writer is disabled.None of my appPool accounts are running under local system.
I have read many forums/blogs, but couldnt find a solution for this.
Any help would be appreciated!

Hi,
As I understand, you found event id 3351 in event log. Please collect more information as below：
Check if the error also occurs on other servers in your farm.
Check if backup job is scheduled at the time when the event id occurs.
Please run Config Wizard or psconfig.exe -cmd secureresources on all servers and test the issue again.
Regards,
Rebecca Tu
TechNet Community Support

SQL database login for 'SharePoint_Config_2010' on instance 'DB server' failed. Additional error information from SQL Server is included below.

we formatted Database server and restored all the databases from the backup. but the sharepoint site is giving below error when i access the home page.
we have 3 application servers in that two are working fine, but only one server getting the below error.
SQL database login for 'SharePoint_Config_2010' on instance 'db server' failed. Additional error information from SQL Server is included below.
Login failed for user 'domain\user'.
could you help what is the issue?

Hi,
According to your post, my understanding is that you failed to access sharepoint site with one application server.
It was due to the MOM/SCOM Agent that has a SharePoint management pack installed, the agents Windows Service runs as ‘Local System’ and thus causes this.
The workaround is to either kill the SCOM agent service, or set it to run as a dedicated service account.
In addtion, I recommend to add the logon account of the SharePoint Timer service as a user of the SharePoint_Config database. Give role membership to the account db_owner.
You also need to add the SharePoint accounts back into sql server.
There are some similar articles for you to take a look at:
http://blog.blksthl.com/2012/04/26/login-for-sharepoint_config-login-failed-for-user-domaincomputername-scom-agent/
http://msdn.microsoft.com/en-us/library/jj551781(v=nav.70).aspx
http://sharepoint.stackexchange.com/questions/51623/moved-sql-databases-for-sharepoint-2010-and-now-have-a-3351-error
Best Regards,
Linda Li
Linda Li
TechNet Community Support

SQL Exceptions, transport-level errors on SharePoint 2010 App Server

SharePoint 2010 becomes inaccessible 2-3 times per day. It happens at approximately the same times: 8 PM, 1 AM and 1 PM. It is inaccessible for about 3-4 minutes and then comes back on its own.
During the time it is down, we see the following errors in the event viewer on the application server:
EventID: 5586 Task Category: Database -
Unknown SQL Exception 64 occurred. Additional error information from SQL Server is included below.A transport-level error has occurred when receiving results from the server.
(provider: TCP Provider, error: 0 - The specified network name is no longer available.)
EventID: 3 Task Category: None -
.Net SqlClient Data Provider: System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error:
0 - The specified network name is no longer available.)
EventID: 6398 Task Category: Timer -
The Execute method of job definition Microsoft.Office.Server.Search.Monitoring.HealthStatUpdateJobDefinition (ID f9db48f1-f115-47ab-99b6-552460cbb782) threw an exception. More
information is included below. A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
EventID: 8086 Task Category: Business Data -
The BDC Service application failed due to a SQL Exception: SQLServer host ums1spd1v. The error returned was: 'A transport-level error has occurred when sending the request to
the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)'
The SharePoint logs have errors during the same time period saying the same kinds of things: Sql exception raw message: A transport-level error has occurred when receiving results from the server,
The specified network name is no longer available, etc.
Our network administrator has looked at the issue and cannot find any network problems.
He setup a continuous ping from the app server to the database server.
Even during the times these errors are occurring, the app server is still able to reach the database server.
However, you cannot ping the app server itself during this time.
Our database administer cannot find any SQL Server issues.
There are no errors in the event viewer or the SQL logs on the database server.
In Central Admin, we can see that one or two jobs fail with SQL errors during the times these errors take place.
It is almost always the “User Profile Service Application – User Profile Language Synchronization Job” and often the “Health Statistics Updating” or “Crawl Log Report for Search Application Search Service Application”.
These jobs run successfully at many other times during the day.
Is there a good way to tell if the database, network or SharePoint itself is the root of these problems?
The database and network guys say there are no problems in their areas, but all I can find in the SharePoint logs is that it can’t reach the database server.
Thank you for any suggestions you may have!

Since these seem to happen at very specific times, I would run a NetMon trace at that window to capture what is going back and forth (or perhaps the timer service is just unable to reach the SQL server).
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Sql exception occurred during pl/sql upload error in custom integrator

Hi,
I have modified custom integrator which was working fine. I have added one column in template and the lov is working fine.
Issue is that when i upload the file to oracle it showing error as ''sql exception occurred during pl/sql upload".
I have tried executing the same from back end but it was working fine from back end and inserting properly in interface table.
Kindly suggest for the issue.
Regards,
Gk

Hi,
You can get the error message in excel sheet itself by using the following piece of code.
FND_MESSAGE.CLEAR;
FND_MESSAGE.SET_NAME ('APPLICATION', 'APPLICATION_MESSAGE_NAME');
FND_MESSAGE.SET_TOKEN ('ERROR_TOKEN', ERROR MESSAGE);
FND_MESSAGE.RAISE_ERROR;
Create an excpetion block and include the above piece of code whilde catching the exception.
APPLICATION- The applicatio in which you create message
APPLICATION_MESSAGE_NAME- The message Name
ERROR_TOKEN- You must create a token in application message
ERROR MESSAGE- You can see the error using SQLERRM.
Thanks,
Vinoop

"An unknown service exception occurred" error when attempting to change Microsoft account

I am trying to change the e-mail address of my Microsoft account I use to access MSDN. On the “My Account” page I select the “Change Microsoft Account for this subscription” link and enter the temporary passphrase
as prompted. After I hit 'next' I receive the following error:
“An unknown service exception occurred. Please try again or contact customer support with the following reference id.
Reference Id:
1999706587
This error has been logged with the reference number noted above. Please use this reference number if you contact support.”
The Reference Id changes with each subsequent attempt.

Uberstomping,
I recommend you contact MS Partner Support about this issue. You can reach them by visiting
http://MSPartner.microsoft.com and then clicking "Support". Since this is an account specific issue, you'll need some individual help to resolve that should not be handled publicly.
Thanks,
Mike
MSDN and TechNet Subscriptions Support
Did Microsoft call you out of the blue about your computer?
No, they didn't.

Getting SQL Exception occurred during PL/SQL Upload instead of custom message in Web ADI excel.

I am using procedure driven WEB ADI and want to do basic validation for the same.
The code for validation is:
BEGIN
         SELECT 'X'
           INTO V_X
           FROM DUAL
          WHERE P_FROM_DATE IS NOT NULL
            AND P_TO_DATE IS NOT NULL;
      EXCEPTION
         WHEN OTHERS
         THEN
            HR_UTILITY.SET_MESSAGE (800, 'PLEASE FILL THE DATES');
            HR_UTILITY.RAISE_ERROR;
      END;
The error is fired as required, but the message is not the one which I want to show. In the message it says:
SQL Exception occurred during PL/SQL Upload instead of 'PLEASE FILL THE DATES'.
PFA the complete procedure for your consideration.
Awaiting your quick reply.

Can you please paste the complete error message(stack)
better post sql, pl/sql ones in the below forum -
PL/SQL

A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)

Hi guys
i have problem when i run my windows application exe in windows server 2003
it give me this exception error :
I using sql server 2005
visual studio 2008
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
at System.Data.SqlClient.TdsParserStateObject.ReadByte()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
at Sales.SalesClass.ShowSalesData(String ConnectionString)
at Sales.Form1.timer1_Tick(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
Sales
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Documents%20and%20Settings/administrator.ALTAWIREADYMIX.000/Desktop/Sales.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
System.EnterpriseServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Why this error show and how to solve it
if possible help me
Why this exception show and how to solve it.
Notes this exception not close my application and not affect in result show but i don't know why it show

The problem can be caused by certain issues of long-running queries, which are reported improperly. Try increasing the timeout:
http://support.microsoft.com/en-us/kb/555938

How to show information from sql to flash cs6 in textbox

I am having trouble with the showing of result of the information from sql to flash cs6 textbox which is dynamic text.
I am using php to transfer the data to flash.
I will like to show me the information in order like
Name      score
Tom        20
Jack       10
I already try reqVar.name + " " + reqVar.score and it does not work.
And there is also 6 data in the sql to be formated like the top.
function loginFunction(evt:MouseEvent):void
var variables:URLVariables;
var req:URLRequest;
var loader:URLLoader;
if (usertxt.text == "")
resTxt.text = "Please enter your username.";
return;
if (passtxt.text == "")
resTxt.text = "Please enter your password.";
return;
variables = new URLVariables();
variables.username = usertxt.text;
variables.password = MD5.hash(passtxt.text);
req = new URLRequest("http://localhost:8088/classP/checkLogin.php");
req.data = variables;
req.method = URLRequestMethod.POST;
            loader = new URLLoader();
     loader.addEventListener(Event.COMPLETE,handleRes);
loader.load(req);
function handleRes(evt:Event):void
var loader:URLLoader;
var reqVar:URLVariables;
loader = URLLoader(evt.target);
reqVar = new URLVariables(loader.data);
if (reqVar.result == "PASS")
gotoAndStop(10);
var req:URLRequest;
req = new URLRequest("http://localhost:8088/classP/getScores.php");
req.method = URLRequestMethod.POST;
            loader = new URLLoader();
     loader.addEventListener(Event.COMPLETE,handleRes3);
loader.load(req);
else
{resTxt.text = "Login Failed";}
function handleRes3(evt:Event):void //to show the output message when it is correct in user and pass
var loader:URLLoader;
var reqVar:URLVariables;
loader = URLLoader(evt.target);
reqVar = new URLVariables(loader.data);
displaytxt.text = reqVar.name + " " + reqVar.score;

1.ckeck your syntax: the last two closing brackets are coming out of nowhere.
2.use trace commands in your eventhandlers to show if you get any results and if not use them as a hint where the error lies.
for example:
reqVar = new URLVariables(loader.data);
trace("reqVar:"+reqVar);

SQL exception occurred during PL/SQL upload (Web ADI)

Hi,
I am having issue loading data using Web ADI, I am getting "SQL exception occurred during PL/SQL upload" error, I tried to restart Apache, also looked into the BNE.log file for the exact error but I am still not sure about this exception, can anyone please help?
bne:text="SQL exception occurred during PL/SQL upload."
bne:cause="Database insert error"
RDBMS: 11.2.0.3.0
Oracle Applications: 12.0.6
Thanks,
Bharat

I am having issue loading data using Web ADI, I am getting "SQL exception occurred during PL/SQL upload" error, I tried to restart Apache, also looked into the BNE.log file for the exact error but I am still not sure about this exception, can anyone please help?Please rename the log file, reproduce the issue and check the log file then.
bne:text="SQL exception occurred during PL/SQL upload."
bne:cause="Database insert error"Please see these docs.
R12 Uploading Intercompany Transactions Shows SQL Exception Occurred During PL/SQL Upload [ID 1234063.1]
Batch Element Entry (BEE) Spreadsheet Interface > 10 Rows Fails with Error: 'SQL exception occured during PL/SQL Upload.' [ID 388012.1]
How Do You Setup An AGIS Transaction That Has Several Transaction Lines For The Same Transaction [ID 946499.1]
FCH: Error: "The upload process has completed with errors. Please Close to return to the document and fix the errors. - No rows uploaded - <999> rows were invalid" During WebADI Data Upload [ID 553025.1]
R12: Legal Entity Name must be < 31 characters. [ID 472505.1]
Oracle Payroll 'Batch Element Entry ( BEE )' Frequently Asked Questions ( FAQ ) [ID 1353021.1]
Thanks,
Hussein

SQL exception occurred during PL/SQL upload in WEB ADI Upload

Hi All,
I created Custom Integrator with META DATA as Update. This Integrator Downloads the data and will update the date. Once it is updated, I am uploading the same. For Quite Some Time, Everything is working fine and no issue.
All of Suddenly , I am getting the error message 'SQL exception occurred during PL/SQL upload.' When I am trying to update and upload the values in the same custom integrator.
My Oracle Apps and DB Version are
RDBMS : 11.1.0.7.0
Oracle Applications : 12.1.3
Any Help is appreciated.

I found the issue. If you check read only check box for the mandataory parameters that Package is using, then we get this issue. Try to avoid read only check box for mandatory parameters in th epackage.
For Example.
I am using hr_person_extra_info_api.update_person_extra_info API in my custom package, In this API, p_person_extra_info_id is the mandaory parameter.
I am trying to download the data and updating the data and uploading the values with the custom WEB ADI. In the custom layout, I checked ready only box to parameter 'p_person_extra_info_id '. With this I am getting issue 'SQL exception occurred during PL/SQL upload in WEB ADI Upload'.
again I unchecked the read only button to this 'p_person_extra_info_id ' Parameter. It is uplaoding and working with no issues.
Thanks Guys for all your help.

Error occurred while downloading files from Administration Server...

Hi guys,
If i already have my application deployed and exploded in ../tmp/_WL_user , when I restart the managed server it will try to download again the files from the upload directory in the Administration Servers? (I'm using stage mode).
Sometimes I got the following error:
Caused By: java.io.IOException: [DeploymentService:290066]Error occurred while downloading files from Administration Server for deployment request "0". Underlying error is: "null"
and I already have the war exploded in /tmp/_WL_user
the staging mode is not only for the first deployment? when i don't have the war exploded in /tmp/_WL_user?
I've some confusion related to the process or deployment/startup of the managed servers.
Thanks

Hi,
when you get following error * DeploymentService:290066 * then that means
A service on the machine is preventing the WebLogic Server remote instance from downloading the configuration file. This can be Hosts Intrusion Prevention (HIPS) agents or any other agent causing this issue.
Disable the agent interfering with the download process to fix this issue.
Regards,
Kal

CLI0615E Error receiving from socket, server is not responding.

We recently changed a web application using DB2 5.2 tables from ODBC to JDBC. We are using the COM.ibm.db2.jdbc.net.driver. We are using a
connection pool and running on iPlanet.
We are getting intermittant "CLI0615E Error receiving from socket, server is not responding errors". We have looked in the JDBC forum and DB2 support and cannot find a reasonable answer to this problem. It is NOT always on sql statements that take a long time to execute, so I don't think it is a timeout issue.
I read something about "stale connections". Does anyone know how to check to see if this is a problem?
When we first converted the app, we had a lot of problems also with "invalid handle or statement is closed" which we have determined was being caused by the user submitting the page again before it had time to finish the first time. We have put in javascript code to prevent multiple submits. Could this server not responding problem be caused by double submits that we have not located yet?
The error is NOT occuring on any one page, and the same page will run correctly once and the next time throw this error.
Any suggestions would be greatly appreciated.
Thanks.
[29/Apr/2003:11:00:20] info (42196): COM.ibm.db2.jdbc.net.DB2Exception: [IBM][JDBC Driver] CLI0615E Error receiving from socket, server is not responding. SQLSTATE=08S01
     at COM.ibm.db2.jdbc.net.SQLExceptionGenerator.throwReceiveError(SQLExceptionGenerator.java(Compiled Code))
     at COM.ibm.db2.jdbc.net.DB2Request.receive(DB2Request.java(Compiled Code))
     at COM.ibm.db2.jdbc.net.DB2Request.sendAndRecv(DB2Request.java(Compiled Code))
     at COM.ibm.db2.jdbc.net.DB2RowObject.next(DB2RowObject.java(Compiled Code))
     at COM.ibm.db2.jdbc.net.DB2ResultSet.next(DB2ResultSet.java(Compiled Code))
     at bom.Bom.getDefs(Bom.java(Compiled Code))
     at jsps.bbapps._eng._ENGJGLT0_jsp._jspService(_ENGJGLT0_jsp.java(Compiled Code))
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897)
     at com.iplanet.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:464)

hi,
lemme try to tell u what i thinkk..i dont think its' a solution
Usually this error code means that there was some problem while the driver tried establishsing a socket connection to the remote server. You could very well avoid this by tracking out what is preventing the socket connection.. it may be network congestion or some other onfiguration problems with the network, or with the DB2 server...
But if the same application could work perfectly with jdbc-odbc driver in same environment,then it needs some attention.either the ibm driver isn't throwing the error as expected by the iplanet or iplanet isn't acting as needed when such an error is thrown.
contact them and they may provide and explanation..
wishes,
Jer

Retrieving free/busy information from the server takes very long time

Hello, we are running Outlook 2010 32-bit in Windows 7 64.bit, and have encountered a strange problem, whenever we want to book
a resource (i.e. conference room) from Scheduling assistant, it takes very long time, sometimes even more than a minute to see the utilization of the room, it being stuck at "Updating schedule information. Retrieving free/busy information from the server"
The interesting thing is that most newly deployed PCs exhibits this same behavior, while older machines with basically the same setup gets the availability information almost immediately.
It is unclear whether this is a server setting or desktop issue, as all new Windows 7/Outlook machines that are deployed from the WDS-server exhibits the same slow behavior.
Please advise any troubleshooting steps to investigate the very slow retrieval lookup of free/busy information from the Exchange server.

Hi,
Does this issue occur on OWA?
If no, it means the issue is mainly related to the Outlook client.
Regards,
Simon Wu
TechNet Community Support

Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.

Similar Messages

Maybe you are looking for