Unlockable file - The nightmare scenario

For some months now I've been trying to delete a folder containing an application (FWIW "Classic Menu"), but without success.
The folder icon shows that it's locked, as are the files within it (and the files within the application "package"). The Get Info window for the folder shows that the "Locked" checkbox is checked and active, but when I try to uncheck it, it stays checked. I've tried changing the permissions, but I get "The operation could not be completed. An unexpected error occurred (error code 120)."
I've tried every trick suggested on this forum (including Dr. Smoke's workarounds - even "The Nightmare Scenario": switching to single user mode and changing the System Immutable flag), but to no avail - all I ever get is "Operation not permitted."
I've also tried every known utility, such as "Force Delete," but I still get "Operation not permitted."
Now this folder isn't taking up much disk space, so I could probably live with it, but it's a little disconcerting having something so immoveable on my hard drive - a bit like having a lodger in my house who's chained themselves to the bed and thrown away the key. In any case, it's become a bit of a mission to purge my drive of this unwelcome guest.
Anyone got any suggestions?

Hi
"The operation could not be completed. An unexpected error occurred (error code 120)."Well, error 120 is "Directory not found", so obviously something is amiss.
all I ever get is "Operation not permitted."I'd like to see the commands you used to produce this output.
I'd also like to see all the output (including commands) when you follow the procedure in Dealing with Immutable Files and Folders, as suggested by Rich JG.
You may not have an immutable flag set, but the output may tell us more.

Similar Messages

How to handle the control records in case of file to idoc scenario.

Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.

Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri

How can I include the Header Information....for a File to IDOC Scenario

Hi,
I made a File to IDOC Scenario with DEBMDM06 for MDM>XI>SAP R/3. The Header Information in the XML File which is at the XI end is Missing. For that reason In Tcode SXMB_MONI we are getting an Error that "HEADER Information Missing: Message should Start with EDI_DC40" i.e the Header Information.
My Question is that whether we can do some changes in the Message mapping Step in the Integration Repository. I HardCoded the Few mandatory Fields that were there but it Again gave me the Same Error as above.
Can you please Suggest some Solution for this. Since the data is Coming in from MDM part the Header information is not there but It actually Important as it has got all the Port Information.
Kindly Inform me some Solutions.
Thanks & Regards
Somnath

Hi Suraj,
Thanks for ur Reply, but Since we are Doing a File to IDOC Scenario the IDOC DEBMDM is on the Right Side in Message Mapping and as U know it is Mandatory to Map an IDOC on the Right Part. EDI_DC40 is coming as it is there in the IDOC but our XML File Does not have that. If we Don't Map then it Becomes RED, which is an Error.
Furthermore in the Receiver Agreement we have put the Necessary Details such as Sender Service and Receiver Service along with the IDOC Communication Channels.
Can U give as a Better Insight on this Note how to check the Header Part as it is mandatory to MAP.We also tried to HARDCODE it by putting those Values and Mapping them to a Constant but it is Giving the Same Error.
Thanks and Regards
Somnath

Fixed Length of a field in the File-XI-RFC Scenario

Dear All,
I am doing one File-XI-RFC scenario in which user is sending me the file with some delivery nos (VBELN) in it and I am sending those all delivery nos to my RFC in R/3.
Now I want one conition to be put that if any delivery no is of less than 10 characters than that delivery no should not be sent to RFC rest the remaining will be processed to RFC.
I have put one UDF for this whose code is as follows:
int len = a.length();
if (len == 10)
int b=1;
b = (1/len);
return a;
But this code is not working. Please guide me how to solve this problem.
Regards,
N.Jain

HI,
Input is A : Delivery No take all the delivery no in one context.
for(i=0;i<A.length;i++)
int b= Integer.parseInt(A); it will remove all the leading zeros if it has any.
int j=(new Integer(b).toString().length()); count the lenght of the Del no.
if(j>10)
result.addValue(A(i));
else
result.addValue("null"); will not send anything.
Thanks and Regards,
Chirag gohil

XI unable to post IDOC to ECC the interface is FILE-to-IDOC scenario

Hi All,
The XI interface is a FILE-2-IDOC scenario and some times IDOC's in the receiver system are not posted. I did see successfully message for that particular messages but the IDOC's were not created in the ECC. If the messages is reprocessed then IDOC's are posted successfully to the ECC system. The message has checkered flag in the SXMB_MONI tcode.
This issue is occurring intermittently so could some point me in the right direction how to trouble shoot the issue.
Thanks,
Sarvesh

Hi,
Interesting problem...since its intermittant..
You cannot use any of the traditional RWB or message monitoring or cc chanel monitoring here as the error is in the ecc system, so from an XI standpoint it has left XI succssfully..that explains all the chequered flags..indicating success.
we19, we12, we14(process all idocs) test out the whole process with a load..use transaction we46..this can tell you why it is failing....in r/3
from the ecc system to check inbound queue monitoring.
from there you can select the IDocs or queues which you want to monitor, using the specified selection parameters available.
Look at the status record for the idoc that should give you more information, processing status of the idoc...that should tell you the status code assigned to it..
There is one other option here....if you can figure out what sequence they need to be posted in...that might be the reason for the failure..you can specify the sequence to post the idocs in, use qRfc ..
Hope that helps
Regards
Ravi Raman

How to explain the business requirement of a file to rfc scenario

Hello Experts,
 How do i explain the business requirement of
 1. FILE TO IDOC.
 2. FILE TO RFC.
 3. FILE TO JDBC scenarios?
 Cud anybody explain me how to explain the requirement of these scenarios in an interview?Cud u pls send me the example for these and the systems involved and the documents involved...helpful answers will be rewarded...
 cheers
 Jay.
my mail : [email protected]

1. FILE TO IDOC.
When u have ur master data stored in a file thru a legacy system say in some xml format then u may need to have this scenario configured.
2. FILE TO RFC.
Consider pt1 but here for example consider delete scenario. when u have deleted the mater/transaction u may need to update another file...so in this case u will need to config this scenario...y we cannot use idoc is becoz sync scneario is not possible with idoc but yes with rfc
3. FILE TO JDBC scenarios?
u have some business data extracted from a file and before u update a r3 transaction u may need to refer a datbase table to read some data baed on keyfield...so u will take a jdbc response and based on that u may validate with the data for r3 updation.
the scenario keeps varying in real life and the above are very few examples of the kind of scenario that would exists in the business world

File-PI-RFC scenario with extraction of contents in the filename

Hi All,
I am working on File to RFC scenario.
Here the file name is like 'ABCD_XYZ_1234_DATE' where the date is in yyyymmdd format.
I have to read this filename & the date in the filename is to be mapped with one of the RFC parameter.
Also how would I trigger the Interface if the file resides in PI server or on local mchine.
How to configure the processing parameters in sender comm channel if I want to read the file after every 15 mins?
Thanks,
Amit Patil

Hi,
By writing simple UDF in your mapping you can Acheive this
Try this Once
DynamicConfiguration dynamicconfiguration = (DynamicConfiguration)param.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
String MyFileName = dynamicconfiguration.get(key);
String str[] = MyFileName.split("_");
return str1[1];
Map this to the date parameter(RFC) in the mapping .
If the file resides on Local machine then you can use FTP and if it is on PI server then NFS as Transport protocol.
If you want read the file for every 15 min there are 2 options
1) Set the poll interval time to 900 sec
2) Configure ATP in RWB
Configuring ATP in RWB :
http://www.dataxstream.com/2010/11/configuring-availability-time-planning-in-sap-pi/
Thank & Regards,
Deepthi

File RFC sync scenario error: MsgId alredy exists in the system

Hi,
I am working on File RFC sysnc scenario.
The first message that I tried to processed gave a error
com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not convert request from XML to RFC:com.sap.mw.jco.JCO$ConversionException: (122) JCO_ERROR_CONVERSION: Date ' ' has a wrong format at field REQ_DATE_H: Unparseable date: " "
When I retried correcting the data, it started giving strange error
Message ID 62D07CA0D3EE11DCCD36DA01C52F0606 for pipeline CENTRAL, version already exists in system.
How to rectify this?
XI version is PI 7.0 SP10

Nisar,
Which program to re-run? Are you talking about activating the channel again? If so, then I have done it many times changing the file name.
I got below error in Communication Channel Monitoring:
2008-02-06 02:27:39 Error Received XI System Error. ErrorCode: MSGGUID_EXISTING ErrorText: ErrorStack: Message ID 83F8B0B0D48311DCA544DA01C52F0606 for pipeline CENTRAL, version already exists in system
2008-02-06 02:27:39 Error Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:.
2008-02-06 02:27:39 Error Transmitting the message using connection http://xibox:8000/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:.
2008-02-06 02:27:39 Error The message status set to FAIL.
2008-02-06 02:27:39 Error Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:
2008-02-06 02:27:39 Error Attempt to process file failed with com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:
2008-02-06 02:27:39 Error Attempt to process file failed with com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException

What are the connections to be done for file-to-RFC scenario in XI & R3 ?

Hi,
What are the connections to be done for file-to-RFC scenario in XI & R3 & also if it is RFC-to-File .
I need to know what type connections used for file-to-RFC in backend .
In SLD it should be Third Party or WEB AS ABAP..

Hi Nandan,
Perform the following configurations...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
Regards
San
Remember to set the thread to solved when you have received a solution there is a Way.

HT3275 2 problems: All files are locked - how to globally unlock on the backup drive? I am backing up large video files 500GB on a 2 TB machine. Time Machine repeatedly copies everything using up all of disk space. I only need 1 copy not, twenty. What to

2 problems: All files are locked - how to globally unlock on the backup drive? I am backing up large video files 500GB on a 2 TB machine. Time Machine repeatedly copies everything using up all of disk space. I only need 1 copy not, twenty. What to do?

2 problems: All files are locked - how to globally unlock on the backup drive? I am backing up large video files 500GB on a 2 TB machine. Time Machine repeatedly copies everything using up all of disk space. I only need 1 copy not, twenty. What to do?

The Resource Pool has already been destroyed - File to JDBC Scenario

Hi,
Error : "Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: The resource pool has already been destroyed"
Scenario : This error is occurring for the File to JDBC Scenario .
Could you please let me know why am getting this error and solution to resolve this error..
Thanks in Advance!!
Regards,
Sekhar

Hi ,
Thanks for the replies..
Just to add to have more clarity on the error for the scenario
Scenario : This error is occurring for the File to JDBC Scenario
The Scenario has a BPM involved.The synchronous send step within the BPMsends the data to the JDBC receiver adapter.The response from the JDBC
adapter is throwing the below error.
Thanks,
Sekhar

HT201274 Can a Sprint Iphone 5 work with T-mobile network? How can one unlock with the MSL code? Sprint is not abiding by the Unlocking Consumer Choice and Wireless Competition Act. FCC will only enforce if we file more complains.

Can a Sprint Iphone 5 work with T-mobile network? How can one unlock with the MSL code? Sprint is not abiding by the Unlocking Consumer Choice and Wireless Competition Act. FCC will only enforce if we file more complains.

T-Mobile is a GSM network whereas Sprint is a CDMA network. They are incompatible. Sprint is not obliged to unlock a phone that is still under contract. Their phones may not be capable of being unlocked.

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

XI 3 File to IDoc scenario - Still referencing Old Logical system

Hi
Dont know if you can help. I have a file to idoc scenario using XI 3 to R/3 4.6c system.
I had the interface working from a third party system XMLHUB to SAP R/3. The Logical system name for the XMLHUB was XMLHUB01 in the SLD which I have set up as a partner profile in R/3. I have recently changed the logical system name to XMLHUBDEV01 in the SLD and created that logical system in R/3 and changed the partner profile to XMLHUBDEV01.
Unfortunately in the sender information of the IDoc the partner number is still XMLHUB01 and not XMLHUBDEV01. I don't understand where this partner is sent from to get into the control record of the IDoc.
I have cleared the SLD cache in both the Repository and the directory. Is there somewhere else I should be looking? Any help would be appreciated.
Regards
Daniel

hi daniel...
this thread wud answer ur query....
Re: IDOC Payload
regards..
vishal

Step by Step Guide Details for RFC to File and File to RFC scenario

Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
Raj

Hi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM

Unlockable file - The nightmare scenario

Similar Messages

Maybe you are looking for