UNX configurations for MS Analysis Services is only through XMLA!!??

In BOBJ4.0, I just Wanted to confirm if the UNX configurations for MS Analysis Services is only through XMLA.
Is there any way BOBJ4.0 can be configured to use MSAS OLEDB for OLAP?
One of our client does not want to go thru XMLA connectivity to their MSAS CUBES, this is possible thru Universe Design Tool but not with IDT.
Can anyone please help on this?

UNX - XMLA
UNV - OLEDB
those are the choices.

Similar Messages

Step by Step configuration for Emergency address service - (Hongkong)

All,
Can somebody guide me to configure emergency address service ( EMPLOYEE_PERSINFO_ADDRESS) for Hong Kong ?
I had configured Japan emergency service last year and I do have some idea . I want to see , if any body out there specifically work on Hong Kong EA service . Please provide steps to complete this task .
Also I have to configure Hong Kong MOLGA(27) . Right now , all the Hong Kong employees has 99 .
Thanks,
Saquib Khan

Hi,
Check following ...................
You define country-specific services. When an employee starts a service, the system determines the employee's country grouping and checks if there is a country-specific service definition in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
If there is a country-specific service definition, the system uses this definition.
If there is no country-specific service definition, the system uses the general service definition in the V_T7XSSSERSRV and V_T7XSSSERSRVC views. If the general service definition does not contain a resource object, the system does not display the service (see example 2).
This enables you to define country-specific variations of services for certain countries while using a general service definition for all other countries.
Activities
Examples
Example 1
Your company has employees in seven different countries:
Germany (01)
Austria (02)
Switzerland (03)
Canada (07)
USA (10)
(Number in brackets = country grouping)
The service for displaying a salary statement is the same for Germany, Austria, and Switzerland. For Canada and the USA, you need services with additional content.
You define a general service for displaying the salary statement in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
You define two additional services for the country groupings 07 and 10 in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
When an employee from Germany, Austria or Switzerland starts the service for displaying salary statements, the system uses the service definition in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
When an employee from Canada or the USA starts the service for displaying salary statements, the system uses the service definition in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
Example 2
Your company has employees in two different countries:
Germany (01)
Switzerland (03)
(Number in brackets = country grouping)
There is a service that is only relevant for employees from Switzerland.
You define a general service without a resource object in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
You define a country-specific service with a resource object for country grouping 03 in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views
This service is only displayed for employees in Switzerland.

Solaris SMF configuration for Oracle CSS service

Below is the code to create oracle CSS service with solaris SMF, it will create smf service with instance name as "default" where as i need to change it to "css"
svc:/application/oracle/css:default
change service instance name to
svc:/application/oracle/css:css
i don't know about smf and xml, can somebody help me to change css service name ?
<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM '/usr/share/lib/xml/dtd/service_bundle.dtd.1'>

<service_bundle type='manifest' name='oracle-database-css'>
<service
name='application/oracle/css'
type='service'
version='1'>
<create_default_instance enabled='false' />

<dependency
   name='multi-user'
   grouping='require_all'
   restart_on='error'
   type='service'>
   <service_fmri
    value='svc:/milestone/multi-user:default' />
</dependency>
<exec_method
   type='method'
   name='start'
   exec='$ORACLE_HOME/bin/ocssd'
   timeout_seconds='30' >
   <method_context>
    <method_credential
     user='oracle'
     group='dba'
     supp_groups=':default'
     privileges=':default'
     limit_privileges=':default' />
    <method_environment>
     <envvar name='ORACLE_HOME' value='/u01/app/oracle/product/10.2.0.1/asm_1' />
    </method_environment>
   </method_context>
</exec_method>
<exec_method
   type='method'
   name='stop'
   exec=':kill'
   timeout_seconds='60' >
   <method_context>
    <method_credential
     user='oracle'
     group='dba'
     supp_groups=':default'
     privileges=':default'
     limit_privileges=':default' />
    <method_environment>
     <envvar name='ORACLE_HOME' value='/u01/app/oracle/product/10.2.0.1/asm_1' />
    </method_environment>
   </method_context>
</exec_method>

<property_group name='startd' type='framework'>
   <propval name='duration' type='astring' value='child' />
   <propval name='modify_authorization' type='astring'
    value='solaris.smf.manage.oracle.database' />
</property_group>
<property_group name='general' type='framework'>
   <propval name='modify_authorization' type='astring'
    value='solaris.smf.manage.oracle.database' />
   <propval name='action_authorization' type='astring'
    value='solaris.smf.manage.oracle.database' />
</property_group>
<stability value='Unstable' />
<template>
   <common_name>
    <loctext xml:lang='C'>
     Oracle Cluster Synchronization Services (CSS)
    </loctext>
   </common_name>
   <documentation>
    <doc_link
     name='Intro to Oracle Clusterware and Oracle Real Application Clusters'
     uri='http://download-east.oracle.com/docs'/>
   </documentation>
</template>
</service>
</service_bundle>Edited by: sachinonnet on Jan 12, 2010 2:01 AM

Hi,
i got the solution as below
removed below line from service xml
<create_default_instance enabled='false' />
created another xml file for instance xml, where i specified the name of instance.
<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM '/usr/share/lib/xml/dtd/service_bundle.dtd.1'>

<service_bundle type='manifest' name='oracle-database-instance'>
<service
name='application/oracle/database'
type='service'
version='1'>
<dependency name='oracle-asm' grouping='require_all' restart_on='none' type='service'>
    <service_fmri value='svc:/application/oracle/database:ASM' />
</dependency>

<instance name='PDB' enabled='false'>
   <method_context
    working_directory='/u01/app/oracle/product/10.2.0.1/db'
    project=':default'
    resource_pool=':default'>
    
    <method_credential
     user='oracle'
     group='dba'
     supp_groups=':default'
     privileges=':default'
     limit_privileges=':default'/>
    <method_environment>
     <envvar name='ORACLE_SID' value='pdb' />
     <envvar name='ORACLE_HOME' value='/u01/app/oracle/product/10.2.0.1/db' />
    </method_environment>
   </method_context>

<property_group name='options' type='application'>
   <stability value='External' />
   <propval name='instance_type' type='astring' value='RDBMS' />
   <propval name='modify_authorization' type='astring'
    value='solaris.smf.manage.oracle.database' />
</property_group>
</instance>
</service>
</service_bundle>

Problems during ADSUser Configuration for Adobe Document services

Dear Netweaver experrts,
I'm trying to activate a Adobe Document Service on my local Netweaver 2004 WebAS sp20.
I realized that my system is missing the appropiate user and grups which have to be configured
using the Visual administrator and the Security Provider mask.
My problem is that I can't create a user or group in my Security provider mask. The Create user and create Groups buttons are grey.
So I don't know which settings are wrong on my system and prevent the creation of new users and groups within the Security provider configuration.
Can you provide any hints ?
Best regards,
Daniel

Hi Danile,
Check whether you got the permissions to access Security Provider.
If you got the permissions then you will find the pencil button above runtime tab in that screen.Click on that and it will allow you to create users.
With regards,
Pradeep.B

Push Configuration for Account Factsheet - Service Manager

Hello Experts,
The Account Factsheet is not getting generated and downloaded in the application. Please find the below details ,
When the Account Sheet is triggered from the application , the push request was registered in the table /SYCLO/PSH01.
The Push Processing got triggered via QRFC and the Queue name is fetched.
But this Queue name is not present in Push Instance Monitoring in the Admin Portal.
Can you let me know how to proceed further , to get the factsheet downloaded to the device ?
Thanks in Advance.

Hello,
You may want to follow the system instruction, and maintain entry in the given table.
This can be found in the SPRO here :
Interaction Center WebClient->Agent Inbox->Inbox Search Definitions->Define Item Types for Searches
Best regards,
Sylvain AGUETTAZ

SSL and custom domain configuration for cloud service

Hi,
I am doing custom domain mapping and SSL configuration for a cloud service web role. Another important aspect is Cloud service web role uses ADFS in between for authentication.
I have custom domain mapped, SSL uploaded on cloud services Certificates
tab in management portal, certificate .pfx and chaining certs .CER are added as below -
<Certificate name="UATCert" thumbprint="A" thumbprintAlgorithm="sha1" />
<Certificate name="Certificate1" thumbprint="B" thumbprintAlgorithm="sha1" />
<Certificate name="Certificate2" thumbprint="C" thumbprintAlgorithm="sha1" />
I see these certificates getting added properly to Azure cloud service web role instance VM.
The problem is, when I access the custom domain,
https://mysite.com/default.aspx in the browser ultimately after ADFS login I see
https://cloudservice.cloudapp.net/default.aspx. My understanding is, cloudapp.net should not be seen in the browser to the client. Also I keep getting error of certificates stating "There is
a problem with this website’s security certificate" when browser shows cloudapp.net url.
How can I avoid display of cloudapp.net in browser and show only custom domain Url. Also how can I avoid this certificate error ?
Thoughts?
http://sanganakauthority.blogspot.com/

Hi kunal,
Based what you described, I understand that you want to use the custom domain for cloud service web role and apply azure active directory authentication to the web role application.
>>>The problem is, when I access the custom domain,
https://mysite.com/default.aspx in the browser ultimately after ADFS login I see
https://cloudservice.cloudapp.net/default.aspx.
As for above issue, I think you should make sure you have registered the web application in azure AD both "SIGN-ON URL" and "Reply URL" are
https://mysite.com/default.aspx
>>>Also I keep getting error of certificates stating "There is a problem with this website’s security certificate" when browser shows cloudapp.net url.
Try to upload a valid certificate (provided by CA) to cloud service for your custom domain.
Best Regards,
Fuxiang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

SAP HANA as a data source for Analysis Services

I tried to use SAP's .net provider for HANA as a data source for an Analysis Services cube but to no avail.   I can connect, create a named query and preview data from the data source view designer but when SSAS actually tries to run the query,
it wraps the named query in another query and produces a syntax error.
For example, if the named query is "select * from ENTHANA.MARA",
SSAS sends a query like this "SELECT [test].* FROM (select * from ENTHANA.MARA) AS [test]" (Test is the name of the named query).
I know SSAS wraps queries and that's fine - except that brackets are not a valid way to quote an identifier in HANA. HANA uses double quotes like Oracle.
Is there any setting in SSAS that can affect this behavior?   Will HANA ever be a fully supported data source for SSAS? If so, when?

Hi David,
According to your description, you are creating a SQL Server Analysis Services project, now what you want is using SAP HANA as the data source, right?
SSAS support many type of data source. However, as you can see on the link below, SAP HANA data source was not listed on that link. So this type of data source is not supported in current version of SSAS. Microsoft will update that document when it is supported.
http://msdn.microsoft.com/en-IN/library/ms175608.aspx
Thank you for your understanding.
Regards,
Charlie Liao
TechNet Community Support

Imapact of SQL Server Analysis services

Hi
What will be the impact of installing analysis services on an existing SQL Server database which is shared among different web applications Project Server 2013 (PWA) and other SharePoint Applications?In my
environment SQL Server database is shared between PWA and another sharepoint web applicaiton, so before installing I want to understand its impact on database and the other SharePoint Web application.
Please help
Himanshu
Himanshu

I may impact your Server and SQL Server performance significantly.
This is a common architecture in which both the SQL Server relational DB Engine and Analysis Services instances are running on the same server. In this scenario, it is absolutely crucial to override the defaults for both instances in order to prevent resource
contention, memory pressure, and (in the worst case) memory exception errors.
Consider
SQL Server memory configuration after installing Analysis services, which includes
Minimum Server Memory
Maximum Server Memory
Minimum Memory per query (only for advance users)
At the same time you have to set the
memory configuration for SSAS engine also you have to consider
LowMemoryLimit
TotalMemoryLimit
HardMemoryLimit
Remember, other than SQL Server and Analysis service other application in your server will be consuming memory. And the most important part is to leave memory for OS to run properly.
So, General formula to set Hard limit of SSAS could be (but not limited to)
Hard Memory Limit = Total Physical Memory - SQL Server Instance min - OS memory (include other application too)
Disclaimer: Above formula is just for demonstration purpose only; should not be applied
on production without complete analysis.
Worth to notice that SSAS does create its own database for cube so other than memory you need to plan about disk space (if you have limited space)

SQL Server Analysis Services (SSAS) 2012 High Availability Solution in Azure VM

I have been testing an AlwaysOn high availability failover solution in SQL Server Enterprise on an Azure VM, and this works pretty well as a failover for SQL Server Databases, but I also need a high availability solution for SQL Server
Analysis Server, and so far I haven't found a way to do this. I can load balance it between two machines, but this isn't working as a failover and because of the restriction of not being able to use shared storage in a Failover Cluster in Azure
VM's, I can't set it up as a cluster which is required for AlwaysOn in Analysis Services.
Anyone else found a solution to use an AlwaysOn High Availability for SQL Analysis Services in Azure VM? As my databases are read-only, I would be satisfied with even just a solution that would sync the OLAP databases and switch
the data connection to the same server as the SQL databases.
Thanks!
Bill

Bill,
So, what you need is a model like SQL Server failover cluster instances. (before sql server 2012)
In SQL Server 2012, AlwaysOn replaces SQL Server failover cluster, and it has been seperated to
AlwaysOn Failover Cluster Instances (SQL Server) and
AlwaysOn Availability Groups (SQL Server).
Since your requirement is not in database level, I think the best option is to use AlwaysOn Failover Cluster Instances (SQL Server).
As part of the SQL Server AlwaysOn offering, AlwaysOn Failover Cluster Instances leverages Windows Server Failover Clustering (WSFC) functionality to provide local high availability through redundancy at the server-instance level—a
failover cluster instance (FCI). An FCI is a single instance of SQL Server that is installed across Windows Server Failover Clustering (WSFC) nodes and, possibly, across multiple subnets. On the network, an FCI appears to be an instance of SQL
Server running on a single computer, but the FCI provides failover from one WSFC node to another if the current node becomes unavailable.
It is similar to SQL Server failover cluster in SQL 2008 R2 and before.
Please refer to these references:
Failover Clustering in Analysis Services
Installing a SQL Server 2008 R2 Failover Cluster
Iric Wen
TechNet Community Support

MS Analysis Services Universe

I am trying to create a Universe based on MS Analysis Services, however when get to the screen where I can see all the cubes I am able to see only the Demo cubes (Food services company).
I am using system administrator user and can see all the cubes when I log in directly to the Windows server.
Is there any settings on the Analysis services side which needs be enabled to make it accessible from Universe Builder?
Thanks.

Hi Didier,
I could not find any specific documentation for MS Analysis Services 2005 in the link below:
http://help.sap.com/businessobject/product_guides/
Could you please post a link for the documentation?
I am trying to access the MS Analysis Services OLAP Cubes generated by Outlook Soft (Ver 4.2), are there any limitations for accessing the Outlook Soft cubes?
Thanks.
-Deepu

PowerBI Analysis Services Connector Error 403

Hi all,
I have a problem with the configuration of PowerBI Analysis Services Connector. I fill all fileds but i have an error in the last step.
Error description: "The remote server forward an error: Forbidden (403)"
I don't understand this error because:
- SSAS acces are granted for my domain\user
- Office 365 account is the same user
- SSAS tabular model is granted for this same domain\user
Who can help me ?
Thanks

Brian-
One other common issue I've seen is the UPN not quite matching. Log onto the SSAS server as the user who's logged into Power BI. Then open a command prompt and run:
whoami /upn
Hopefully the UPN it says will match your EffectiveUserName test and will match exactly how you're signing into the Power BI site.
If that doesn't work, your best bet is to go to
http://support.powerbi.com/ and click Contact Support and describe this situation and someone from the Power BI support team should get in touch with you to troubleshoot.
http://artisconsulting.com/Blogs/GregGalloway

Login Module configuration for soap adapter ?

Hi Guys,
I have configured XISOAPAdapter for client certificate Authentication and i have created 1443 as the HTTPS port on the ABAP stack and defined this port in the instance profile.
Under SSL provider i have selected 50101 as the HTTPS port and the user mapping to the certificate works fine and i was able to login directly.
https://host:50101/XISOAPAdapter/MessageServlet - I was able to login with the user mapping to certifcate.
but when i try https://host:1443/XISOAPAdapter/MessageServlet - it is asking for the basic password authentication and the automatic login with the certifcate is not working. Our customer will be using this url to send messages to soap adapter.
under policy configurations for XISOAPAdapter, i have defined only clientcertificateloginmodule and define the rule as Rule1.getUserFrom=wholecert.
any help or suggestions would be appreciated.
Thanks,
Srini

Hi,
We also experienced that limitation when a vendor is connecting to our XI SOAP Sender Adapter. It is asking for basic username/password. What we did was to create a Generic XI user with a password on it and use SSL authentication at the same time. Our Scenario was PI --> XI --> SAP R3, with the PI system using an HTTP RFC destination with a Basic Logon and Active SSL option to connect to the same system as yours https://host:portnumber/XISOAPAdapter/MessageServlet
Let me know if this helped...
Regards,

Getting information about configured(webservices.xml) web service handlers

Hi Guys, The situation is: In a Web Service, I have few GenericHandlers configured as server(Role) in webservices.xml(for IBM Runtime) & server-config.wsdd(Axis Runtime). Say the handlers are A, B & C. Now, when there is a inbound call A,B & C are getting invoked as expected.
I am basically lookin for a way to know (programmatically) the # of handler configured for this web service i.e., 3 in this case and few other handler specific details.
I was investigating getting hold hold of HandlerChain by following way
HandlerRegistry hndlReg = service.getHandlerRegistry(); List hChain = hndlReg.getHandlerChain(new QName("http://test.com","PortName"));
, but I dont get hChain containing information about A,B or C. Ya, here I can add Handlers programmetically which gets invoked also. But no information of already configured handlers in configuration files.
Is there any way(programmetically) to get the details about already configured handlers.
Appreciating your help.

Please help ....

SAP SMTP Configuration for Microsoft Exchange Online (Microsoft Hosted Solution for Exchange - Office365)

Dear All,
We are using Microsoft Exchange Online (Microsoft Hosted Solution for Exchange – Office 365) for sending and receiving emails. Now we want to setup SAP SMTP so that emails / notifications can be sending through SAP via Microsoft Exchange Online. It is quite easy to configure for setting SMTP Services for locally hosted Exchange Server. But this is the first time I am trying to setup for Microsoft Exchange Online.
Current Instance Profile settings are as follows;
is/SMTP/virt_host_1                         *:25000
is/SMTP/virt_host_0                         *:*
icm/server_port_2 PROT=HTTPS,PORT=44300,PROCTIMEOUT=300,TIMEOUT=600
icm/server_port_1                           PROT=SMTP, PORT=1080, TIMEOUT=180
icm/server_port_0 PROT=HTTP,PORT=8000,PROCTIMEOUT=300,TIMEOUT=600
ms/server_port_0                            PROT=HTTP,PORT=81$$
SCOT Settings are
Mail Host             smtp.office365.com
Mail Port              587
Following are the settings for configuring Outlook for Exchange Online – Office 365;
Server name
Port
Encryption method
POP3
outlook.office365.com
995
SSL
IMAP4
outlook.office365.com
993
SSL
SMTP
smtp.office365.com
587
TLS
Please assist if any one configure office365 with SAP.

Hello Majid,
Were you able to setup SCOT for Office365 online, I have to setup same.
Can you help with some guidelines on how you setup.?
Regards,
Ashish

Service Manager Data Warehouse Install - Analysis Server Configuration For OLAP Cubes Fail

Hello everyone,
I have an issue with my installation of the Data Warehouse for System Center Service Manager 2012 SP1.
My install environment is the following:
Windows Server 2012 – System Center Service Manager (Successfully Installed) - Virtual
Windows Server 2012 – System Center Data Warehouse (Pending) - Virtual
Windows Server 2012 – MS SQL Server 2012 – Physical, Clustered 1<sup>st</sup> of Four Servers
The SQL Server is a clustered installation with named instances, specifically for SharePoint and Service Manager. Each instance has its own IP address and dynamic ports are turned off. I’m installing using the domain administrator account and I also chose
to run the installer as administrator. The domain admin has sysadmin rights to the service manager server and instance I’m trying to install on. However, the account does not have sysadmin rights to some of the other instances.
The install is smooth up until it needs to connect to the Analysis server database. I have tried connecting to the analysis servers on other SQL servers on site and all were successful. The only difference between the older SQL servers, the SQL 2012 development
server and the SQL 2012 Production server I’m trying to install to is that the that the domain admin account doesn’t have sysadmin access on all the databases on the new production server. The SQL server is being installed and configured by a contractor so
if you all have troubleshooting suggestions, I’ll need to coordinate with the contractor.
Starting with the screen below, I began searching for help online. There seems to be no one else with this issue or it is not documented properly. I opened a ticket with MS, called the contractor and troubleshot with him, troubleshot as far as I could on
my own and I’m still at a loss as to what is preventing the installer from connecting specifically to the analysis server.
I first thought the installer was at issue or that the data warehouse sever was at issue. But all signs are pointing at the SQL server. The installer is able to connect to all the other SQL servers – including other 2012 servers (same versions) – so it can’t
be the installer. I’m pretty sure the SQL server is going to be at issue.
After looking at this error, I opened the resource monitor and clicked the dropdown to see if it was trying to connect to the correct server and it was. I then connected to the old and new test and development servers successfully. Then connected to the
SQL 2008 R2 production cluster successfully. I then compared the two servers. The only difference other than the version numbers is that the admin account doesn’t have sysadmin rights on all the SQL 2012 database servers. But the database servers are not the
problem. The analysis servers are.
I then checked the event logs and they are empty as far as this issue is concerned. Actually, there are no errors on the SQL 2012 production box and the Data Warehouse box. I then checked the log that the installer creates during every step of the installation
and this is what is created when the dropdown is clicked for the analysis server configuration screen. The log file location is:
“C:\Users\admin\AppData\Local\Temp\2\SCSMSetupWizard01.txt”
In the file is the following text.
01:03:34:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012
01:03:34:Using SQL Server 2012 management scope on SCSMSQL2012
01:03:36:Collecting SQL instances on server SCSMSQL2012
01:03:36:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:36:Using SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:38:Found SQL Instance: SCSMSQL2012\PWGSQL2012
01:03:38:Found SQL Instance: SCSMSQL2012\SCSMSQL2012
01:03:39:Error:GetSqlInstanceList(), Exception Type: Microsoft.AnalysisServices.ConnectionException, Exception Message: A connection cannot be made. Ensure that the server is running.
01:03:39:StackTrace:   at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
   at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
   at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetASVersion(StringBuilder sqlInstanceServiceName)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetSqlInstanceList(String sqlServerName, Int32 serviceType)
I’m now investigating the issue according to this output, and decided to ask you all if you’ve run into this issue and found a resolution.

I am running into same issue . But I don't anything in the instances section related to portipv6 . I do see in the listener section , I tried to remove it . But it comes up again . Please help
<ConfigurationSettings>
<Security>
<RequireClientAuthentication>0</RequireClientAuthentication>
<SecurityPackageList/>
</Security>
<Network>
<Listener>
<RequestSizeThreshold>4095</RequestSizeThreshold>
<MaxAllowedRequestSize>0</MaxAllowedRequestSize>
<ServerSendTimeout>60000</ServerSendTimeout>
<ServerReceiveTimeout>60000</ServerReceiveTimeout>
<IPV4Support>2</IPV4Support>
<IPV6Support>2</IPV6Support>
</Listener>
<TCP>
<MaxPendingSendCount>12</MaxPendingSendCount>
<MaxPendingReceiveCount>4</MaxPendingReceiveCount>
<MinPendingReceiveCount>2</MinPendingReceiveCount>
<MaxCompletedReceiveCount>9</MaxCompletedReceiveCount>
<ScatterReceiveMultiplier>5</ScatterReceiveMultiplier>
<MaxPendingAcceptExCount>10</MaxPendingAcceptExCount>
<MinPendingAcceptExCount>2</MinPendingAcceptExCount>
<InitialConnectTimeout>10</InitialConnectTimeout>
<SocketOptions>
<SendBufferSize>0</SendBufferSize>
<ReceiveBufferSize>0</ReceiveBufferSize>
<DisableNonblockingMode>1</DisableNonblockingMode>
<EnableNagleAlgorithm>0</EnableNagleAlgorithm>
<EnableLingerOnClose>0</EnableLingerOnClose>
<LingerTimeout>0</LingerTimeout>
</SocketOptions>
</TCP>
<Requests>
<EnableBinaryXML>0</EnableBinaryXML>
<EnableCompression>0</EnableCompression>
</Requests>
<Responses>
<EnableBinaryXML>1</EnableBinaryXML>
<EnableCompression>1</EnableCompression>
<CompressionLevel>9</CompressionLevel>
</Responses>
<ListenOnlyOnLocalConnections>0</ListenOnlyOnLocalConnections>
</Network>
<Log>
<File>msmdredir.log</File>
<FileBufferSize>0</FileBufferSize>
<MessageLogs>Console;System</MessageLogs>
<Exception>
<CreateAndSendCrashReports>0</CreateAndSendCrashReports>
<CrashReportsFolder/>
<SQLDumperFlagsOn>0x0</SQLDumperFlagsOn>
<SQLDumperFlagsOff>0x0</SQLDumperFlagsOff>
<MiniDumpFlagsOn>0x0</MiniDumpFlagsOn>
<MiniDumpFlagsOff>0x0</MiniDumpFlagsOff>
<MinidumpErrorList>0xC1000000, 0xC1000001, 0xC100000C, 0xC1000016, 0xC1360054, 0xC1360055</MinidumpErrorList>
<ExceptionHandlingMode>0</ExceptionHandlingMode>
<MaxExceptions>500</MaxExceptions>
<MaxDuplicateDumps>1</MaxDuplicateDumps>
</Exception>
</Log>
<Memory>
<HandleIA64AlignmentFaults>0</HandleIA64AlignmentFaults>
<PreAllocate>0</PreAllocate>
<VertiPaqPagingPolicy>0</VertiPaqPagingPolicy>
<PagePoolRestrictNumaNode>0</PagePoolRestrictNumaNode>
</Memory>
<Instances/>
<VertiPaq>
<DefaultSegmentRowCount>0</DefaultSegmentRowCount>
<ProcessingTimeboxSecPerMRow>-1</ProcessingTimeboxSecPerMRow>
<SEQueryRegistry>
<Size>0</Size>
<MinKCycles>0</MinKCycles>
<MinCyclesPerRow>0</MinCyclesPerRow>
<MaxArbShpSize>0</MaxArbShpSize>
</SEQueryRegistry>
</VertiPaq>
</ConfigurationSettings>

UNX configurations for MS Analysis Services is only through XMLA!!??

Similar Messages

Maybe you are looking for