Up2date not working SSL Errors

Things have been working fine for some time, yesterday I go to run rep_populate.sh and get the following error.
There was an SSL error: [('SSL routines', 'SSL3_GET_SERVER_CERTIFICATE', 'certificate verify failed')] A common cause of this error is the system time being incorrect. Verify that the time on this system is correct.
My system time is in sync as always. Any thoughts on what could be at issue here?
I even try to reregister the system and it doesn't allow me to, same error. I tried to grab a new version of up2date but I already have the most recent version.
Could it possibly be the /etc/sysconfig/rhn is out of date in regard to the serverURL=https://xmlrpc.rhn.redhat.com/XMLRPC not being current? I'm grasping at staws on this one.
Thanks.

Hi, Kwoodman
do you mean you meet the same when you run 'up2date' command ?
so could you post the content of /var/log/up2date with covering error message ?
Regards
Jason

Similar Messages

Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded." How can I repair?

Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded."
How can I fix it?

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I downloan and updated my iphone software ...i have tried to activate it back but it is not working out error message always what can i do?

i downloan and updated my iphone software ...i have tried to activate it back but it is not working out error message always what can i do?

this is the error message........we are sorry we can not continue with your activation please contact customer care
another message will say actiavtion server not available;
please what should i do?

Accidentally copied microsoft word icon to desk top. Now program will not work. Error message says cannot be opened because of problem. How do I re-install ?

Accidentally copied microsoft word icon to desk top. Now program will not work. Error message says cannot be opened because of problem. How do I re-install ?

Drag the Word icon back to where it belongs.
Applications > Microsoft Office 2011 > Put Word there.
I'm assuming you have Office 2011. If you have 2008 there should be a similar location to put Word.

Hi Ive downloaded the free trial version of Fcpro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later,Help

Hi friends.
Ive downloaded the free trial version of Final cut pro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later, please can anyone Help.

Just download Mavericks (10.9) its free and installed it (Mac App Store)

Apple tv is not working: "an error occurred loading this content. Try again later". Any idea?

My apple tv is not working. I have rented 4 movies and I cannot open any of them. My Apple TV is located in USA. Anywy I am traveling at the moment outside US, but cannot watch my rented movies. I get the following error message: "an error occurred loading this content. Try again later". Any idea? What is the solution for this issue?

I have 4-5 mbps for Downloads. It works fine when opening websites and downloading large files from the Internet. I have set-up my IP to "automatically" as you suggested, even though I believe this was the default setting.
I changed the resolution in Settings > Itunes Store > Video Resolution from 1080p to 720p. Then I rented again "Salmon Fishing in the Yemen", (but now using HD 720p) and I get exactly the same error.
Then I changed it to Standard Definition and now is working. Basically what I have found out is that if I rent movies in HD 1080p or HD 720p it will simply not work.
I believe 4-5 mbps is very fast internet connection, so the errors above should not be appearing.
Feedback for Apple TV developers is to show estimated time for full downloads when using 1080p or 720p so the user can understand what is going on. Very frustrating as I just bought the Apple TV for watching HD movies. I have a 55" HD Sony Bravia tv ready to be used... !!!

ICloud will not work. Error upon PC Boot Entry Point sqlite3_wall_checkpoint could not be located. How do I fix?

iCloud will not work on my PC. When I boot my PC I get an error saying, "The Procedure Entry Point sqlite3_wall_checkpoint in the dynamic link library SQLite3.dll". How do I fix this?

I'd first try uninstalling and reinstalling your MobileMe control panel, dc. Does that clear the message up?

Oracle 9iAS R2 - reports are not working - JSP Error

dear All
We are having issue in our Oracle 9i AS R2, the reports are not working, this thing happend suddenly , while runing any report the following messages are coming
==============
500 Internal Server Error
OracleJSP:
JSP Error:
Request URI:/repdemo/examples/Tools/test.jsp
Exception:
org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
     at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java:79)
     at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java:147)
     at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java:196)
     at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java:365)
     at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java:493)
     at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java:356)
     at oracle.reports.engine._EngineReportStub.doneReport(_EngineReportStub.java:36)
     at oracle.reports.definition.RWJspProxy.doneReport(RWJspProxy.java:261)
     at oracle.reports.definition.RWReport.done(RWReport.java:1087)
     at oracle.reports.jsp.ReportTag.release(ReportTag.java:398)
     at oracle.jsp.runtime.OracleJspRuntime.releaseTagHandler0(OracleJspRuntime.java:1109)
     at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1213)
     at examples.tools._test._jspService(_test.java:292)
     [SRC:/examples/Tools/test.jsp]
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
     at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
-=================
please help to resolve this issue.
thanks in advance.
regards

Dear All
Just to share the solution of the problem.
We restarted the XServer which is on the other machine then Oracle 9i AS Middle Tiere and Infra. Once we restarted the XServer machine, and restarted the reports server , every thing back to normal.
regards

COMPONENT MONITORING in the RWB is not working /throwing error

HI
I ve recently installed a new PI 7.0 SP 18 , but my COMPONENT MONITORING in the RWB is not working , as i click on COMPONENT MONITORING it throws an error :
java.lang.NoClassDefFoundError: com/sap/aii/rwb/exceptions/HttpException
, pl help
thanks
mojib

Hi Mark ,
Thanks for your timely help , it has solved my problem ,
thanks once again
rgds
mojib

Download link from order e-mail not working 'page error'

I ordered Adobe Photoshop Elements 10 & Adobe Premiere Elements 10 back in Nov2011. I downloaded both to learn I needed the 64 bit version. When I had time I downloaded Photoshop Elements 64 bit and got my project done. Now I went back to get my 64 bit version of Premiere but the link no longer works. On the order it says you can re-download anytime. I sign in to my Adobe Account, go to Order History, hover over download - I see the address in my browser status bar at bottom left. When I click on download the the status bar displays the yellow triangle with the warning message 'page error' when you expand the message it indicates a address is not working. I tried turning my firewall off - didn't have to do that before - but same message. There must be a link where paying customers can get the proper download? Everything I find is for the trial version. Is there a link? Why do the links in the order e-mail expire? Thanks in advance!

OK, I finally worked around the issue. Right click on the word download – then select open in new window. Not sure why this worked – but it did. Jeff, the alternate download option does appear on the second page that loads AFTER you get past the initial download link. Though once I got there I was able to use the primary download for 64 bit. Thanks all for looking at this. J potter, try this and see if it helps.

"activeDocument.saveAs" does not work! -- Error 8800 | PS CS5 | Mac OSX 10.5.8

Error 8800: General Photoshop error occurred. This functionality may not be available in this version of Photoshop.
I even tried to copy the Script from the scripting Guide.
jpgFile = new File( "/Temp001.jpeg" )
jpgSaveOptions = new JPEGSaveOptions()
jpgSaveOptions.embedColorProfile = true
jpgSaveOptions.formatOptions = FormatOptions.STANDARDBASELINE
jpgSaveOptions.matte = MatteType.NONE
jpgSaveOptions.quality = 1
app.activeDocument.saveAs(jpgFile, jpgSaveOptions, true,
Extension.LOWERCASE)
Everything else in my Scripts work :-/
Any Tipps?

The reason the original script did not work is new File( "/Temp001.jpeg" ) is not a valid file path. The path must be the full URL not a releative one.
The reason the second script saves to the folder where Photoshop is installed is because path is a reserved word in Photoshop. Even is you assign something else to path like var path = app.activeDocument.path, it will still point to the app path. name is another reserved word. It will always return 'Adove Photoshop'.
Better to do something like this.
var docPath = app.activeDocument.path;
var jpgFile = new File( docPath + "/Temp001.jpeg" );

I have swtiched to Lion and now my backup to Airport is not working. Error - The backup disk image "/Volumes/Data/Anik Karimjee's MacBook Air.sparsebundle" could not be accessed (error -1).

Hi
I have a time capsule that has been working fine, but I swtiched to Lion and now get this error with no help?
The backup disk image “/Volumes/Data/Anik Karimjee’s MacBook Air.sparsebundle” could not be accessed (error -1).

See # C17 in Pondini's excellent support document Time Machine -- Troubleshooting
http://pondini.org/TM/Troubleshooting.html

Macbook 2009 Not working properly [Error -50 and other several issues]

Hello there!
I am having several issues with my Macbook, they all showed unexpectedly. Most applications would not work, such as Disk Utility or Pages. Safari couldn't load any webpage, just after a long time it was able to display them. Also, I was having some kind of error -50 when trying to move or delete any file, and iTunes was showing the following message; "iTunes can't verify the identity of the server "ax.itunes.apple.com". The certificate for this server is invalid. You might be connecting to a server that is pretending to be "ax.itunes.apple.com". I couldn't turn off the computer either, when I tried to doing so it wouldn't do anything, I had to press the power button to turn it off. After that, I turned the computer on, everything showed up as normal but after a few seconds later the computer suddenly turned off, I tried again but I got the same result. Afterwards, I tried in recovery mode, and weirdly, it didn't show any problem. I ran disk utility and verified the hard drive but it says it's working perfectly. The SMART status also says the hard drive is fine.
What could this mean? All these problems appeard suddenly, I've never had any of those issues before.
I have a late 2009 Macbook with Mavericks Installed,
4GB of RAM,
A 320GB Seagate Hard drive,
And a 250MB Graphics Card.
Thanks for your help!

Hello there!
Thanks for your reply! I have no anti-virus software installed, but I have (rather said, had) CleanMyMac though. I installed the demo version and ran it only once. I was curious about it, I had no idea it could make as much damage as MacKeeper.
Also, I scaned again my internal Hard Drive with Disk Utility using the OS X Installation DVD, and according to the report, the partition where the operative system is located is corrupted. Disk Utility tried to repair it but failed, and the most reliable option was to reformat the disk. I proceeded to reformatting it but unfortunately the process was not succesful - I got an error that reads; "POSIX reports: The operation couldn’t be completed. Cannot allocate memory". I tried to reformat the disk using the terminal, but I was only able to erase it, not to format it. I did a research and I found out the problem might be the SATA cable, (https://discussions.apple.com/thread/3507546).
Could that explain also the weird behaviour when I was using the computer? I guess my best bet now is to get a new SATA cable.

HP Support Assistant not working -An error occurred

Recently i got problem with hp support Assistant first it show there is new version to download then i did download it after finish download it won't installing i dont why ,then i did try to unistall it but it won't then i did unistall it from ( SWsetup) but i dont know what happen it did unistall but not 100% then i did download last version again from hp then try to install it again but it gave me strang message while installing its Error 1316 update/install then i found it on hp support there is many users they have same problem but in the end i fixed by MIcrosoft fixit and it did unistall the hp Assistant fully then i did try to install it again and it did correctly but after i proccess hp assistant it open but not work fully the problem it gave me it show in the product name:loading -serial number:loading - product number:loading and in the top it say An error occurred and when i want to tune up it not pass downloading pleas i need help with this problem .

Hey guys, Try this out. http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-e-g/Why-does-my-HP-support-assistant-keep-crashing/m-p/2219537#M119037 THX

Concatenating a string in a URL syntax does not work (syntax error)

I am trying to print a Report in PDF format. The code is:
select '<a href="http://oasdev.oh.gov./reports/rwservlet?GDMS_ACR&Y='||:P106_YEAR||'&B='||:P100_BUSINESS_UNIT_ID||'&C='||:P106_COMMISSION_ID||'&d=('||TO_CHAR(SYSDATE,'MMDDYYYYhhMISS')||')", target=_new> Print PDF Version of the report </a>' url from dual
GLOBAL_URL should carry the value ( a sring) ----> http://oasdev.oh.gov.
Therefore I changed it to the following code:
select '<a href="GLOBAL_URL/reports/rwservlet?GDMS_ACR&Y='||:P106_YEAR||'&B='||:P100_BUSINESS_UNIT_ID||'&C='||:P106_COMMISSION_ID||'&d=('||TO_CHAR(SYSDATE,'MMDDYYYYhhMISS')||')", target=_new> Print PDF Version of the report </a>' url from dual
But it does not work. Any suggestion would be highly appreciated.
Thanks in advance.
Gouri
Edited by: user1046395 on Dec 8, 2010 8:41 AM

When you do a select, you need to select into a variable..
select ' Print PDF Version of the report ' url INTO <Variable>from dual
Are you trying to run an Oracle Report from APEX??
If so look at this thread: Using popupURL to call Oracle Reports - Problem passing parameters
Thank you,
Tony Miller
Webster, TX
When you have enough clowns, you have a circus.

Up2date not working SSL Errors

Similar Messages

Maybe you are looking for