How do we cancel or reverse    Disconnection Document

Hi,
I am new to ISU. 
As per the requirement I am going for Re-connection when system receives payments from customer.
I need to do certain validation and actions before actually going for Re-connections    such as
if current status is  -    Disconnection Document open -No Service Order
      system status  -    1 (New, release unnecessary)
      Action              -    Cancel the Disconnection Documentmet
My Query is  :   How do I cancel the Disconnection Document ?
                         Is these any function module / BAPI   for this.
Could you provide me the Function module and its required parameters for the same.
Thanks
SKM

Use this code to complete the disconnection document number. For disconnection document status 1, complete and cancel are the same thing.
DATA: AUTO  TYPE ISU05_DISCDOC_AUTO.
*     disconnection order-action
      AUTO-CONTR-USE-OKCODE    = 'X'.
      AUTO-CONTR-OKCODE = 'DARKCOMPL'.
  CALL FUNCTION 'ISU_S_DISCDOC_CHANGE'
       EXPORTING
            X_DISCNO       =  Disconnection Document No
            X_UPD_ONLINE   =  'X'
            X_NO_DIALOG    =  'X'
            X_AUTO         =  AUTO
*           X_OBJ          =
*           X_NO_OTHER     =
*           X_DISCACT      =
*      IMPORTING
*           Y_DB_UPDATE    =
*           Y_EXIT_TYPE    =
*           Y_NEW_EDISCDOC =
*           Y_INTERFACE    =
     EXCEPTIONS
          NOT_FOUND      = 1
          FOREIGN_LOCK   = 2
          NOT_AUTHORIZED = 3
          INPUT_ERROR    = 4
          GENERAL_FAULT  = 5
          OTHERS         = 6.
Chaiphon

Similar Messages

  • How to do Cancel Inv. Ver. document using MR8M for Back Dated Posting

    Dear All,
    Need your input for configuring MR8M to cancel the back dated posting.

    hi
    do u want to post the document in last period like JAN
    If you want to open previous period for reversal entry or additional entry
    The following are steps for Opening previous period in MM :
    1. Go to TCode SU01 (see OSS NOTES 487381)
    2. Choose "change" tab with your loging Name
    3. Choose "Parameter" tab
    give Parameters MMPI_READ_NOTE with date format as YYYYMMDD
    (say today 20071201)
    4. SAVE.
    5. Go to T-code MMPI
    6. open the old periods which you want to post into,
    Note :
    the period opening will be valid for only for the particular day only.
    7. Complete the posting you want to reverse or add
    8. Go to MMPV to close the periods
    (do this process only if nessesary )

  • Cancel or reverse ARE1

    Hello
    I am facing problem while cancelling and reversing ARE1 document.
    Export excise invoice is posted. ARE1 document is created posted and updated. Then I want to cancel the excise invoice for which I have to cancel or reverse ARE1. It is mandatory.
    So while cancelling ARE1, error occurred: In process document can cancelled.
    While reversing ARE1, 'countersigned by customs document can not be reversed.
    Thanks in advance
    Dhanashree

    Dear Dhanashree
    Are you trying to cancel through <b>J1IH</b>??
    Thanks
    G. Lakshmipathi

  • How to block the usage of reversed billing document for future

    Hello,
    A billing document that we reversed earlier was printed later. Billing document type is S1 and output type assigned to it is RD00. We don't want them the users to print the document that was reversed or cancelled. How can we make this document printed by only certain users? And do I just have to remove the output type if we never want the reversed billing documents to be printed?
    Thank you very much.
    H

    Hi ,
    i think removing the output condition type may work , after your printing is done , u can manually remove the output type in the
    document itself. so that the document will not be printed by others.
    Please let me know if you still need any more help.
    Thanks and regards,
    Rajeshwar

  • Update in disconnection document after reversal of demounted device by EG53

    Hi everybody,
    I have an issue reagardig diconnection document update. For instance if i make a device removal EG32 in a disconnected installation, the status of the disconnection document it is update with status 24 or 27.
    So far so good, but if i make the reversal of the demounted device with EG53, the status of the disconection document remains 24 or 27 (no update to 21).
    This is no good for the next steps in reconnection, because the device shows like iti is demounted, but in fact it is installed.
    Please, a solution,
    Thank you,

    Hi Olivia,
    Thank you for your reply, but this is not a solution, because the users uses EG53 for a year, and by the way EG50 doesn`t work - The status of the device doesn`t allow it.
    The scenario it is like this:
    1. He use EG32 to demount a meter - this will change the status of the disc, document to 27.
    2. He use EG53 to reverse the demounted meter - this it is not related to the disc doc to change it to 21.
    This is my problem because the disc document after EG53 remains in status 27.
    And if we look at the device this is installed.
    Thank you,
    KR

  • How do I cancel the distance between the numbers? I'm having trouble copy phone numbers from the phone book and send it via SMS This problem I've found in the Arabic language, numbers appear in reverse Please help System 6.0.1

    How do I cancel the distance between the numbers?
    I'm having trouble copy phone numbers from the phone book and send it via SMS
    This problem I've found in the Arabic language, numbers appear in reverse
    Please help
    System 6.0.1

    MPEG-4 should not be used in FCP unless it is converted first or optimized in the application.
    Trash your preferences. Trash your project render files. Switch off background rendering. Do not re-render. Export your projects.
    Ignore the last frame and first frame indicators.

  • How to reverse clearing document

    Dear gurus,
    I would like to reverse clearing document(document no. 1) by FBRA but i can not, it have message "Document xxxx is not purely a clearing document". because this clear document(document no. 1) was cleared by anohter document(document no. 2). That's means i must be rererse document no 2 too.
    My broblem is i can not clear document no. 2 because it was cleared by another document and.....continuously... 
    Do you let me know for how to reset document only not need to reverse?
    Thanks you.

    Hi
    I am curious as to how this scenario can be there...Anyways, how many such documents are there. If you need to reverese document 1 and you say there are upto 7 documents, you need to start with Document 7. The only way you can find out is by tracking the document down to the last pure clearing document. Then start resetting and reversing,.....Say doc7, then doc6 then doc5 so on.
    I would really like to know the live scenario where you are havind a scenario like this where so many interlinked documents are there.
    Hope this helps.
    Karthik

  • How to reverse billing documents in CRM 2007 utilities billing

    Hello All,
    How to reverse the billing document in CRM 2007 utilities in billing screen.
    In ISU CRM SAP gui we use Tcode EABICO to reverse the document by giving reversal reason and reconcil key. how can we reverse a bill in CRM 2007
    Thanks & Regards,
    Raj.

    Hello Raj,
    you can use the BSP component IUICBCO in CRM2007 in order to perform a bill correction. You can test this BSP component using the transaction BSP_WD_CMPWB.
    This component has already been integrated into the business roles UTIL_IC and UTIL_IC_LEAN.
    Best regards,
    Michael.

  • Re : How to reverse Depreciation documents for assets

    Any body please tell me. How to reverse the Depreciation documents for Asset accounting.

    Hello Ramu,
    Asset transactions have to be reversed using the reversal transaction of the application in which the original transaction was posted (for example, invoice receipt). You automatically go to the appropriate reversal transaction when you choose Postings-> Reverse document.
    In addition to the reversal transactions for documents created in Asset Accounting, there are also the following reversal transactions in the applications integrated with FI-AA:
    Reversal of external acquisition with vendor (Accounts Payable)
    Reversal of acquisition with purchase order reference (goods/invoice receipt)
    Reversal of retirement with customer (Accounts Receivable)
    Procedure
    Choose Postings ® Reverse document ® Other asset document.
    Enter the asset.
    Press Enter
    Select the document to be reversed.
    Choose the Reverse function.
    Below mentioned is the procedure for reversing Settlement of an Asset Under Construction
    Choose Postings->Reverse document->Cap. asset u. const.
    Enter the asset under construction that was settled.
    Press Enter
    The system then reverses all documents that were posted during the last settlement.
    If you want to reverse a settlement that was posted before the most recent one, you first have to reverse all the settlements, which were posted after the one you want, in chronological order.
    You cannot use this transaction to reverse the settlement of assets under construction that were only managed for cost accounting.
    Reward points if i had been of help to you.
    Rgds
    manish

  • How do I reverse a document posted with transaction 1KE8?

    I posted a few documents using transaction 1KE8 from Financial Accounting to Profit Center Accounting.  Now I realize that these documents are not needed in PCA.  I tried to use transaction 1KE8 again and select the reverse box but it just creates a reversal and another entry every time I try.  Am I missing something here or is there another way to reverse these documents?
    Any help would be greatly appreciated.

    HI,
    If the reversal documet is creted with referance to the earlier document, then I feel, system works fine. That is the way it works with that reversal button.
    If you want to manually clear the balance in PCA, you can post with 9KE0.
    Vijay

  • Cancellation of multiorder delivery document.

    Hi Experts,
    I have generated one delivery document from ten sales orders by using the collective processing ( VL10A ).
    Now when I am going to cancel the delivery document from the T-code- 'VL09', system is not allowing me to do it.
    Can any one please suggest how can I cancell this delivery document.
    Thanks & regards,
    Rupam.
    Edited by: RUPAM KR SEN on Jul 29, 2010 1:42 PM

    Hi Rupam,
    I checked this scenario.
    After invoice creation, I cancelled the invoice in VF11, then did PGI reversal in VL09 and then deleted the delivery in VL02N.
    When I deleted the Delivery, it gave a warning saying that the invoice number exists, but it allowed me to delete the delivery.
    Consequently, the sales order now has the Open status.
    The invoice has the delivery document number in the document flow, however the delivery number is not available in the system.
    This will be the same case for you also if you try this scenario. I dont see any problem in this. If you are ok with this process, you can execute this for the problamatic sales orders.
    Hope this helps

  • Error Message for the cancellation of paid billing document

    Hi,
    Can i create and error message for the cancellation of paid billing document? If yes, how can i create such.
    Overview:
    Accounting document is created upon creation of billing document. Upon payment, document cleared is the accounting document created. There are instances wherein accounting document was already cleared but our user is still able to reversed billing document. Now, i want to create an error message or user exist wherein, when a user will not be able to reverse the billing document if the accounting document attached to this billing document is already paid.
    Thank you and best regards.
    Rachelle

    Hi Rachel,
    You can make use of the exit (Include) MV45AFZZ. The corresponding form routine is FORM USEREXIT_SAVE_DOCUMENT_PREPARE.
    In this exit, For the given billing document ( which is going to be cancelled ), pick up the accouting document from BSEG tables.
    For this accouting document, Pass this to BSAD Table ( Customer clleared items) 
    If BSEG-BELNR = BSAD-BELNR and
      BSEG-Acc.Year = BSAD-Acc,year )..
    Then throw a error message and EXIT.
    So for all the cleared docments , user can not cancel the invoices.
    Regards,
    Sai

  • Error while reversing mat document

    Dear all,
    While reversing material document i am getting error as "Reverse the availed CENVAT credit before cancelling excise invoice."
    How i should proceed?
    Naren
    Edited by: Narendra Khedekar on Oct 5, 2010 10:50 AM

    Hi,
    Cancellation of excise invoice process as below.
    1) Cancel the material document in MIGO
    2) Post the excise invoice in J1IEX
    3) Cancel the excise invoice in J1IEX
    4) Perform MIGO again if required.
    If try to cancel without canceling GR documents through J1IEX or J1IH (CANCEL OPTION) you will get an error as Excise invoice has been  already posted
    Cancel GR document
    Post excise invoice - J1IEX while posting under miscellaneous tab enter Rej code 0001
    Cancel Excise invoice u2013J1IEX
    Cross check the entries in J2I9 - You can see credit entry which were already taken credit & the second entry of cancelled/reversed. Hope this helps you.

  • J1IIN reversal accounting document not reflected in SD document flow

    Dear Experts,
    I have created a billing document and then posted excise through J1IIN. When I reverse the Billing through VF11 there are two accounting documents generated(one for billing and other for Excise reversal). But the Excise reversal accounting entry doesnot update the table J_1IEXCHDR for which again i have to post a reversal for Excise through J1IH. So in order to remove the extra accounting entry for Excise reversal during VF11 we have applied Note No:-  551932 due to which the extra accounting document for reversal of Excise is not getting generated but the reversal of Excise made through J1IH doesnot get reflected in the SD document flow.
    Please let us know how to get this entry in SD document flow.
    Thanks & Regards
    Edited by: Aniruddha B Mahalle on Feb 13, 2012 2:45 PM

    Hi Vikas,
    Cancelling J1IIN excise invoice will by default take me in the transaction J1IH what i wanted to know is that can the J1IIN cancellation of excise invoice be shown in the SD document flow. If yes then please let us know the note number to be applied to it.
    Thanks & Regards
    Edited by: Aniruddha B Mahalle on Feb 16, 2012 8:07 AM

  • Cancel a reversed delivery

    Dear Gurus,
    We have posted a delivery last month and that delivery was reversed in this month by mistakenly. Now we need to cancel the reverse document created for this month. How to achieve this? Please advice.
    Thanks,
    Chameendri

    Hello,
    You cannot Cancel a Reversed Delivery. This is so because when you cancalled (Reversed) the Original Delivery the Stock (& valuation) was posted back in your Plant & Company Code. So you cannot cancel a Reversed delivery.
    Only for you is to PGI the Delivery again with back date (if the last month is open in your system). Alternatively you you will have to execute new Delivery in current month.
    Hope this clarifies,
    Thanks,
    Jignesh Mehta

Maybe you are looking for