Update method sample for unified communication ?

Dear all,
    We are creating SOA Application for cisco unified communications.,
UpdateCallingPartyTransformationPatternReq request = new UpdateCallingPartyTransformationPatternReq();
how to use this and call the properties of unified communications. sample is any for c# code..

Your questions should be going to the developer forum, not CSC
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

  • Gartner's Magic Quadrant for "Unified Communications as a Service, North America"

    Does anyone have a copy of Gartner's most recent Magic Quadrant for “Unified Communications as a Service, North America”, or something similar that you would be willing to share with me (assuming that's allowed-not sure if it is)?
    Please advise.
    Thanks!

    Scott,
    Does this cover what you need?
    http://www.gartner.com/technology/media-products/reprints/microsoft/vol14/article18/article18.html
    HTH.
    Regards,
    Bill
    Please rate helpful posts.

  • License Migration for Unified Communications.

    Hi guys. I need assistance for migrate the existing licenses for Cisco Unified Communications Manager, Cisco Unity Connection and Cisco Unified Contact Center Express devices to be valid in the new version installed.
    The existing versions are:
       * Cisco Unified Communications Manager 5.0
       * Cisco Unity 4.0
       * Cisco Unified Contact Center Express 4.5
    The new versions are:
       * Cisco Unified Communications Manager 8.6
       * Cisco Unity Connection 8.6
       * Cisco Unified Contact Center Express 8.5
    I tried to use the licensing tools such as "Cisco Licensing" ([email protected]) and "Product License Registration" (https://tools.cisco.com/SWIFT/LicensingUI/lookupLicenseRehost) but I have not obtained satisfactory results.
    The Product License Registration requieres the following information but I don't know this:
    UDI Product ID:    
    UDI Serial Number:    
    Device Credential:
    Someone knows what is the best way to migrate licenses for UC applications?
    I appreciate any cooperation in this case.
    Thanks a lot.
    Ernesto Gonzalez

    Hi Ernesto,
    For UCCX 4.5 to 8.5, as there is no direct path available for upgrade , you need to use an intermediate version 7.0 to restaore the 4.5 data. From UCCX 7.0 with latest SR you have to perfrom one more upgrade to reach the version 8.5.
    You can use the ordering guides to get to know about the license migration.
    http://www.cisco.com/en/US/partner/products/sw/custcosw/ps1846/prod_how_to_order.html
    http://www.cisco.com/en/US/services/ps2961/ps2664/services_overview_uc_ordering_guide.pdf
    Hope it helps.
    Anand
    Please rate helpful posts !!

  • Cisco UCS C210 M1 server certified for Unified Communications

    Hello:
    Our VAR is telling us that HP and Cisco are splitting up.  We're an HP shop today and the MCS 7800-H series routers were a perfect fit.  Our VAR is now telling us we have to go with the rebranded IBM systems.  BUT I would like to avoid the IBM servers.  And the Cisco servers look attractive.  But I've been unable to determine if the Cisco UCS C210 M1 server is certified for various Unified Communications applications (Communications Manager, Unity, Cisco Emergency Responder, ICM, CVP, etc.).
    Has anyone heard of any Unified Communications deployments on UCS hardware?
    Thanks,
    Ken

    Mr. Schroeder:
    Thank you for the information.  Timing is everything.  We'll likely have to order our equipment in May of this year.  I'd love to start getting Cisco UCS hardware in.  Oh well... maybe next year!

  • Best practice RAID configuration for UCS C260 M2 for Unified Communications?

    I have two UCS C260 M2 servers with 16 drives (PID: C260-BASE-2646) and I am trying to figure out what the best practice is for setting up the RAID.
    I will be running CUCM, CUP, CUC, Prime, etc. for about 2000 phone environment.
    If anyone can offer real world suggestions that would be great. I also have a redundnat server.

    The RAID setup depends a bit on your specific configuration; however, there is a guide for Cisco Collaboration on Virtual Servers that you can review here:
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CF3D71B4_00_cucm_virtual_servers/CUCM_BK_CF3D71B4_00_cucm_virtual_servers_chapter_010.html#CUCM_TK_C3AD2645_00
    If your server is spec'd as a Tested Reference Configuration (TRC) then the C260M2 TRC1 would have 16 HDD that you would configure/split into 2 x 8HDD RAID 5 arrays.
    Hailey
    Please rate helpful posts!

  • Demo GUI for unified communications

    Hi,
    I came across this demo:
    http://www.adobe.com/resources/telecom/uc_demo/telco.html?promoid=BZRO
    It says, the demo is based on products Adobe has now.
    Can someone tell me, which are those products?
    Thanks
    NG

    Nayakgi:
    Looks like Acrobat Connect, Flash Professional, Flash Lite,
    and
    Apollo.
    http://www.adobe.com/products/acrobatconnectpro/
    http://www.adobe.com/products/flash/flashpro/
    http://www.adobe.com/devnet/devices/flashlite.html
    http://labs.adobe.com/wiki/index.php/Apollo
    This looks like the work of the XD team (experience design).
    Hope this helps,
    Jeff Von Ward
    Breeze Support Manager
    Adobe Systems, Inc.
    On Thu, 16 Nov 2006 22:04:53 +0000 (UTC), "nayakgi"
    <[email protected]> wrote:
    >Hi,
    >
    > I came across this demo:
    >
    >
    http://www.adobe.com/resources/telecom/uc_demo/telco.html?promoid=BZRO
    >
    > It says, the demo is based on products Adobe has now.
    >
    > Can someone tell me, which are those products?
    >
    > Thanks
    > NG

  • What is Cisco netManager-Unified Communications 1.0?

    I want to know if this software let me add, change, manage extension in the CUCM6 platform or is just to monitor and diagnostic.
    Thanks.

    Hi Rafael,
    Hope you are doing well :) You are most correct! Here are the various management for Unified Communications;
    Cisco netManager - Unified Communications 1.0 provides simple, ready-to-use monitoring and diagnostics for small and medium sized deployments (up to 1000 users) of the Cisco Unified Communications System.
    Key Features:
    Monitors and evaluates the status of all the key components of a Cisco Unified Communications System, including the underlying transport infrastructure
    Presents the current status of the system through service-level views of the network and provides contextual tools to view current alert status and historical information
    Increases network manager productivity and speeds trouble-shooting by providing contextual diagnostic tools and easy one-click access to embedded device management systems
    Provides current information about connectivity- and registration-related outages affecting all IP phones in the system and provides additional contextual information for location and identification of the phones
    http://www.cisco.com/en/US/products/ps7243/index.html
    Cisco Unified Operations Manager 2.0
    provides a real-time, service-level view of the entire Cisco Unified Communications system and presents the current operational status of each element. It continuously monitors the different elements such as Cisco Unified CallManager, Cisco Unified CallManager Express, Cisco Unity® systems, Cisco Unity Express, Cisco Unity Connection, Cisco Unified Contact Center, Cisco Unified Contact Center Express, Cisco Unified Presence Server, Cisco Emergency Responder, and Cisco Unified MeetingPlace® Express, as well as Cisco gateways, routers, switches, and IP phones.
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps6705/ps6535/ps7121/prod_bulletin0900aecd805800c0.html
    You would probably be looking for something like this;
    Cisco Unified Provisioning Manager 1.2
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps6705/ps7125/ps8771/prod_qas0900aecd80709f1e.html
    Hope this helps!
    Rob

  • Important Updates Required for CIsco Unified Communications Manager Versions 7.1 - 9.1

                       Folks,
    I recently received an Email our Cisco SE letting us know about a specific security hole in CUCM that I figured that you  might be interested in:
    As your account team, we wanted to make you aware of an important update to Cisco Unified Communications Manager that addresses a security flaw discovered on June 6th.  This flaw, if unpatched, could allow a remote attacker to gain access to your Communications Manager. Cisco has released a Cisco Options Package (COP) file for each of the affected versions to mitigate the vulnerability.  The updated COP file, cmterm-CSCuh01051-2.cop.sgn, is available on CCO for download now and is located under the Utilities section of the software downloads page for each of the affected versions. 
    The full details of this vulnerability can be found in the security advisory page: cisco-sa-20130717-cucm - Multiple Vulnerabilities in Cisco Unified Communications Manager. If you have issues downloading the update file or questions about the vulnerability, please don't hesitate to contact your account team so we can assist in you getting access to this.

    Hi Craig,
    From the ReadMe;
    Installation Instructions:
    As with any installation or upgrade, it is recommended that you apply this Update during off peak hours.
    When applying this Update be advised that a clusterwide reboot is required.
    This update must be installed on all machines in the cluster before the cluster is rebooted.
    Installation to all machines in the cluster is required; you must start with the Publisher. After the Update has been applied
    to all servers you will need to reboot the entire cluster.  See
    Rebooting the Cluster for detailed instructions.
    This package will install on the following System Versions:
    7.1.3.10000
    xx or any higher version starting with 7
    .1.3.xxxxx
    7.1.5.10000
    xx or any higher version starting with 7.1.5.xxxxx
    8.5.1.10000
    xx or any higher version starting with 8.5.1.xxxxx
    8.6.2.10000
    xx or any higher version starting with 8.6.2.xxxxx
    9.1.1.10000
    xx or any higher version startin
    g with 9.1.1.xxxxx
    http://www.cisco.com/web/software/282204704/18582/ReadmeForBlindSQLinjectionCOPfile.pdf
    Cheers!
    Rob

  • "Direct Delta" Update Method - Why need for Collective update

    Hi folks,
    I have been going through LO Cockpit in detail and read quite extensively about new update methods and still have one doubt.
    1)Why there is "Job control" for "Direct Delta" Update method in LO Cockpit?.
    If I understand Direct Delta correctly, Application data is directly posted to Delta Queue by SAP Update management using V1 and when the Delta request comes from BW it is read from the Delta queue. So...
    2)why bother about collective run and
    3)where exactly are we going to collect from - there is no intermediate storage like extraction Q or update tables?
    One more question. I noticed that Delta queue is a stopped qRFC. what does this mean?

    Hi Jay,
    These questions have been answered by Roberto Negro in full detail of his 3 episode Blog...
    Please read his blog.
    Click Weblogs above and search for Roberto Negro.
    --Jkyle

  • [svn:osmf:] 13591: Update project files for sample apps.

    Revision: 13591
    Revision: 13591
    Author:   [email protected]
    Date:     2010-01-18 15:14:30 -0800 (Mon, 18 Jan 2010)
    Log Message:
    Update project files for sample apps.
    Modified Paths:
        osmf/trunk/apps/samples/framework/CuePointSample/.actionScriptProperties
        osmf/trunk/apps/samples/framework/CuePointSample/.flexProperties
        osmf/trunk/apps/samples/framework/DynamicStreamingSample/.actionScriptProperties
        osmf/trunk/apps/samples/framework/ExamplePlayer/.actionScriptProperties
        osmf/trunk/apps/samples/framework/ExamplePlayer/.flexProperties
        osmf/trunk/apps/samples/framework/GGTrackingPlugin/.actionScriptProperties
        osmf/trunk/apps/samples/framework/GGTrackingSample/.actionScriptProperties
        osmf/trunk/apps/samples/framework/HTMLMediaContainerSample/.actionScriptProperties
        osmf/trunk/apps/samples/framework/HelloWorld/.actionScriptProperties
        osmf/trunk/apps/samples/framework/MediaContainerSample/.actionScriptProperties
        osmf/trunk/apps/samples/framework/MetadataSample/.actionScriptProperties
        osmf/trunk/apps/samples/framework/MetadataSample/.flexProperties
        osmf/trunk/apps/samples/framework/MetadataVideoPlugin/.actionScriptProperties
        osmf/trunk/apps/samples/framework/MetadataVideoSample/.actionScriptProperties
        osmf/trunk/apps/samples/framework/MetadataVideoSample/.project
        osmf/trunk/apps/samples/framework/NestedMediaContainersSample/.actionScriptProperties
        osmf/trunk/apps/samples/framework/PluginSample/.actionScriptProperties
        osmf/trunk/apps/samples/framework/ReferenceSample/.actionScriptProperties
        osmf/trunk/apps/samples/framework/SampleLoggers/.actionScriptProperties
        osmf/trunk/apps/samples/framework/SampleLoggers/.flexLibProperties
        osmf/trunk/apps/samples/framework/SamplePlugin/.actionScriptProperties
        osmf/trunk/apps/samples/framework/WebPlayer/.actionScriptProperties
        osmf/trunk/apps/samples/libs/VASTSample/.actionScriptProperties
        osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.actionScriptProperties
        osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.flexProperties
        osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.project
        osmf/trunk/apps/samples/plugins/CaptioningSample/.actionScriptProperties
        osmf/trunk/apps/samples/plugins/CaptioningSample/.flexProperties
        osmf/trunk/apps/samples/plugins/CaptioningSample/.project
        osmf/trunk/apps/samples/plugins/MASTSample/.actionScriptProperties
        osmf/trunk/apps/samples/plugins/MASTSample/.project
        osmf/trunk/apps/samples/plugins/SMILSample/.actionScriptProperties
        osmf/trunk/apps/samples/plugins/SMILSample/.flexProperties
        osmf/trunk/apps/samples/plugins/SMILSample/.project

  • Please create forum for Oracle Communications Unified Communication Suite

    Can someone please create a forum for the "Oracle Communications Unified Communication Suite"?
    The equivalent forum on the forums.sun.com was quite helpful and active, so we would appreciate have the forum on the oracle forums as well.
    King Regards

    We will need the product manager to request this - if you know him/her, pass it along.

  • Redundancy for Cisco Unified Communications Manager Business Edition 8.0.

    Hi,
    Is there redundancy for Cisco Unified Communications Manager Business Edition 8.0.
    Can I deploy more than one server at a site for redundancy?
    Thanks
    Mudassir

    No. UCM-BE is a single-server solution. You can use CME in SRST mode for survivability if the server is offline.

  • Cisco Network 2009 - Best practices for migrating previous versions of cisco unified communications manager to cucm 7.1

    Does anybody have a copy of the above referenced presentation that you could send me. 
    Thanks in advanced. 
    The presentation can be purchased at the following site:
    http://www.scribd.com/doc/33211957/BRKVVT-2011-Best-Practices-for-Migrating-Previous-Versions-of-Cisco-Unified-Communications#archive
    but felt I ask one of my peeps first. 
    Thanks in advanced.
    Dennis

    Hi Dennis,
    Well..let's give this a try
    Cheers!
    Rob

  • [svn:bz-trunk] 21327: Updated the sample destination config to show the new "none" value for cluster-message-routing

    Revision: 21327
    Revision: 21327
    Author:   [email protected]
    Date:     2011-06-02 08:51:22 -0700 (Thu, 02 Jun 2011)
    Log Message:
    Updated the sample destination config to show the new "none" value for cluster-message-routing
    Modified Paths:
        blazeds/trunk/resources/config/messaging-config.xml

    Thanks Carlo for your reply.
    I have read again the link and you are correct that in using the preferred command together with localhost under POTS dial-peer, I can now select which correct path to choose for my outbound calls. I'm just not very strong with dial-peer and translation rules at the moment.
    I will try this solution during the weekend and let you know. But it would have been better if there was a sample configuration for this option.

  • Cisco Unified Communications Manager Version 8.6(2.24106)

    Hi,
    Cisco has released a new software update for Cisco Unified Communications Manager Version 8.6 Release Version:8.6(2.24106). I have been trying to find the release notes for bugs/fixes resolved in this version and open caveats but the documentation for this release does not mention them. Any idea what does this release covers ?
    Software Updates for Cisco Unified Communications Manager Version 8.6
    Product Name :
    Cisco Unified Communications   Manager Version 8.6
    Release Version:
    8.6(2.24106)
    Alert Type:
    New File
    File Name:
    cmterm-devicepack8.6.2.24106-2.cop.sgn
    File Description:
    Cisco   Unified Communications Manager 8.6(2.24106) Device Package - Compatible UCM   Version: 8.6
    File Release Date:
    10-DEC-2013
    Regards
    Robin Thomas

    Hi Robin,
    This is actually a "new" Device Pack for CUCM 8.6(2) rather than
    a new CUCM version release. See below
    Cisco Unified Communications Manager Device Package 8.6(2)
    (24106-2) Release Notes
    http://www.cisco.com/web/software/282074299/108461/CiscoUnifiedCommunicationsManagerDevicePackage8.6.2.pdf
    The latest CUCM release for 8.6(2) is;
    8.6(2a)su3  US Export Restricted - full encryption capabilities (non-bootable) -  For upgrade from 8.x+. Upgrades from 6.1(4)+, 7.1(3), 7.1(5) need to be  requested via PUT (www.cisco.com/upgrade) or purchased to obtain  necessary license
    UCSInstall_UCOS_8.6.2.23900-10.sgn.iso
    Cheers!
    Rob
    "When it comes to luck you make your own  " 
    - Springsteen

Maybe you are looking for

  • Complex structures in Sender File adapter

    Hi Experts I am working on XI 3.0 SP 22. How do we handle the complex structures in sender file adapter in file content conversion. Please help me out. Regards Hari

  • After updating to iOS 7 for my iPhone 5, my phone is now in constant vibrate mode.

    After updating to iOS 7 for my iPhone 5 last week, my sounds went away. Phone is randomly showing the ringer silent graphic without me touching the phone or putting it into this mode. The volume settings under sounds are on, notifications are all cor

  • Error 821 XI 3.0, while eamil getting an error format is not found!!!

    In XI 3.0 When I goto SCOT and click on INT or SMTP then click "SET" from support address type window "Internnet is selected" Its comes "output format for SAP documents" window and show some format like PDF, THM and TXT thats it its not show full for

  • PR qty in PO - Order unit Qty

    Hi Happy New Year to all. I have a material for which bas unit of measure is EA. Order unit is Box(1 Box = 6 EA). I have maintain conversion factor in mat master. My question is that if my PR qty is 6 or less than 6 then my order qty should be 1 BOX.

  • Inherited a MacBook Pro, I think....

    I believe I inherited macbook pro but I have no idea. I am new to the mac word and I am trying to learn how to use this.....unfortunately the original user lost his password and I can't get into anything.....Is there a way to erase and start from scr