Update System Data on SMP automatically

Hi experts,
might be a silly question, but is it possible to update the data of the installed systems on service marketplace automatically?
Maybe via Solman?
Kind regards

Hi Christian
Could you check this links
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=147424388
Synchronize System Data with SAP Support Portal - SAP Solution Manager - SAP Library
Regards
Sriram

Similar Messages

  • Current System date in report

    Hi,
    Iam working on BW reports. Currently iam with report which needs to get the current system date automatically in reports.
    Can anybody help me on how to get the current system date in report automatically.
    I tried in layout but it gives all info. But i need only current system date.
    I even tried variable of type sapexit under 0calday. but as it is an variable it filters values with reg to current system date.

    Hi Ucas,
    U have to write the code for the variable as follows:
    1) Go to transaction SMOD
    2) Enter 'RSR00001' in Enhancement field. Also select the 'Components' radio button. And press 'Display'.
    3) Double click on the function module 'EXIT_SAPLRRS0_001'
    4) Then, double click on code text 'INCLUDE ZXRSRU01'
    5) Now, u reach a screen, where u can write ur include program. U have to write, for example, 'INCLUDE my_code'. Then double click on this to include ur code inside.
    6) The code can be :
    CASE i_vnam.
        WHEN '<write ur variable name>'.
        CHECK i_step = 2.
        s_range-sign = 'I'.
        s_range-opt  = 'EQ'.
        s_range-low  = sy-datum.
        APPEND s_range TO e_t_range.
    ENDCASE.
    Assign points if u find the above info useful.
    Message was edited by: Vishesh Pahariya

  • How to update transaction data automatically into MySQL database using PI

    Dear All,
    With reference to subject matter I want a sincere advice regarding how to update transaction data automatically into MySQL database using PI. Is there any link available where I can get step-by-step process.
    Ex: I have a MYSQL database in my organization. Whenever a delivery created in SAP some fields like DO Number, DO quantity, SO/STO number should get updated in MYSQL database automatically.
    This scenario is related to updation of transactional data into MYSQL DB and I want your suggestions pertaining to same issue.
    Thanks and Regards,
    Chandra Sekhar

    Hi .
    Develop a sceanrio between SAP to Database system,When the data updates in SAP Tables read the data and update it in DATA Base using JDBC adapter,but there will be some delay in updating data in MySQL.
    serach in sdn for IDOC-TOJDBC sceannario,many documents available for the same.
    Regards,
    Raja Sekhar

  • Automatic Update of Dates in the Transaction based on the date rule assigne

    Hi Friends,
    This might sound very basic but, it is a major issue at the moment in our project
    I have a date type Today-20 days 
    I have created a Date rule Today-20 days
    and assigned to the Date type and then to the Date profile and the date profile to the Transaction type
    when i create an Opportunity it takes the system date as Todays date and the Today-20 days is also calculated correctly.
    Till now everything is fine.
    But the next day when i open and see the opportunity the Todays date is still the system date from yesterday and also the Today-20 days is the same what i saw yesterday
    Unless i explicitly click and change something in the dates, they dont refresh automatically
    I need a mechanism to trigger the automatic update of dates in the Business Transactions
    so as to trigger an action if an opportunity is open but not touched for 20 days
    Any advise would be appreciated and rewared as points.
    Thanks and Regards,
    Raj

    Hi Raj
    As any other determination the date determination takes only place as long as no dates are filled. It is triggered then only after dates are changed.
    Nevertheless your szenario sounds a bit strange to me: What is the sense of always having the actual date / actual date -20 days in the date scheme? As this can easily be calculated on request you do not put this into the date scheme; only information that stays over time is put in schemes (and saved along with the opportunity main data in the DB).
    So if you want to stay with the concept the only thing you can do is to re-trigger the date determination of the opportunity by e.g. modifying the dates whenever you are changing / saving the opportunty. This can be done in the ORDER_SAVE badi or in an event (search the CRMC_EVENT_CALL table for an appropriate one). In both cases you need to code some lines of ABAP though.
    Hope this helps,
    Kai

  • Is it possible to update the data in entity via System.Data.Entity.DbSet entity

     If i want to insert a record in dynamically created entity, i can do something like,
    System.Data.Entity.DbSet entity = Request.Context.Set(obj.GetType());
    Object Updated = entity.Add(obj);
    but if i want to update the record in same entity how can i do that? Please help i am new to EF.

    Hello Sidra,
    >>but if i want to update the record in same entity how can i do that? Please help i am new to EF.
    If you use the object type, you need to modify its properties by using reflection because at compile time, the type is not known to compiler:
    https://msdn.microsoft.com/en-us/library/axt1ctd9(v=vs.110).aspx
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How do I get pages 5.2 to automatically update the date - use 10.9.2

    How do I get pages 5.2 to automatically update the date in my documents - before the update I could do this. Does anybody have the knowledge or a workaround.
    If not I will dump pages 5.2 and use my old version!!! this feature is important for any and all businesses using pages??
    Any advice on how to achieve this is greatly appreciated
    I use a number of macs all using OSX
    10.9.2

    I have the same problem.
    What confuses me is that all the apple provided templates in pages seem to auto update their time and date upon opening.
    So there MUST be a way to do it... Ive been unable to work out how...
    Amnon

  • Automatically update the date on opening a document in Pages 5

    I can't find how to automatically update the date on opening a document. I could in Pages 4.

    Indeed. That seems to be the only answer to all the "improvements". At least now I can do a word count with or without spaces. Phew. (Note the sarcasm)

  • Updating satellite system data after Upgrade in Solman

    Hi All,
    We are using solman 7.01 connected to BI 7.0 system as it's satellite system, We have recently Upgrade our BI system to BI 7.01 version but we do not see its updated version in solman system.
    We checked in SMSY it is still showing BI 7.0, we have also done option " Read data from system " but it did not work.
    Please suggest to Update my system data in solman.
    Regards,
    Shivam Mittal

    Hi Shivam Mittal
    When you clicked in "Read system Data Remote", were the information returned with success in the logs ?
    Usually the informations aren't pushed because the READ Rfc's are failing.
    If you run job LANDSCAPE FETCH, the information are being collected correctly ?

  • Update Rule Routine: Compare system date

    Can anyone help me with regards to writing some ABAP code in update rule?
    I would like to check if the value of a date characteristics is equal to system date in data source. If its value is equal to system date, assign '0' value to another numeric characteristics. Otherwise, it will get the difference between system date and the date characteristics. I have rewritten the routine as follows. But there is no effects on the result. Am I correct?
    if COMM_STRUCTURE-<date characteristics> = SYST-DATUM.
      RESULT = '0'.
    else.
      RESULT = COMM_STRUCTURE-<numeric characteristics>.
    endif.
    Many thanks in advance.

    I have rewritten the code as follows. ZLASTPURD is a numeric characteristics. The code is written in the routine of ZLASTPURD in update rule. But it takes no effect. The case "COMM_STRUCTURE-/BIC/ZLASTPURD ='0'" means another date characteristics is equal to system date, the value of ZLASTPURD is blank after modifying the code. However, the code is workable for  "RESULT = COMM_STRUCTURE-/BIC/ZLASTPURD.". Is there anything wrong?
    data lastpurdays type I.
    lastpurdays = '1'.
    if COMM_STRUCTURE-/BIC/ZLASTPURD = '0'.
      RESULT = lastpurdays.
    else.
      RESULT = COMM_STRUCTURE-/BIC/ZLASTPURD.
    endif.
    Many thanks in advance.

  • Automatic file generation using system date and time

    Hi guys,
    Iam trying to generate a path for file creation automatically using System date and time. I am running into errors with respect to special characters in filename. I am trying to parse the string to get date and time without the '/' and ':' but have not been successful. is there a better way to do it? Please help! I am trying to avoid a dialog box for user to enter a filename.
    Thanks!
    V
    I may not be perfect, but I'm all I got!
    Solved!
    Go to Solution.

    here is a little experiment .... building the path out of %m (month) %d (day) %(year) type stuff might help.
    Attachments:
    putting time in path.vi ‏7 KB

  • How to pass system date and time with tabular from in Update only Mode.

    Dear Friends,
    i have created tabular form with UPDATE Only .here i am assigning work to another multiple users.i want to insert system date and time when i assign work to multiple users.
    How can i insert system date and time into table using tabular form in Update Only Mode.
    beacuse i have pass in default system date it's working only with add row button.
    How can i pass system date and time in update mode in tabular form.
    Thanks

    Hi,
    You just create a trigger on the table on which you build your tabular form:
    e.g:
    CREATE OR REPLACE TRIGGER  "AUDITING"
    before insert or update on "MYTABLE"
    for each row
    begin
        if inserting then
            :new.created_on := localtimestamp;
            :new.created_by := nvl(v('APP_USER'),user);
        elsif updating then
            :new.updated_on := localtimestamp;
            :new.updated_by := nvl(v('APP_USER'),user);
        end if;
    end;Regards,
    Fateh

  • Password change issue when updating user data in SAP ABAP system

    Hi Guru's,
    One of my reconciliation tasks part of the reconciliation job I've created is doing some strange password updates.
    As you can see below the task selects all users part of my identity store that are part of the account attribute of the particular ABAP system.
    Once these users are selected the task updates different data like username, validto, ... but the task is updating a lot of other things that are not part of the destination tab. What is causing the biggest issue is the password fields that are updated in the ABAP system like, password, productive password, ...
    Can you please advise if I missed something and how to solve?
    Thanks a lot,
    Laurent

    Hello Steffi,
    Yes in the ABAP systems they have the same timestamp. No other jobs are running at the same time.
    It is only happening to a few users depending on the ABAP system. On some ABAP systems there are only a few users for which the PW is reset and other systems 300.
    Example below of a system where I updated all user. In my pass only the following attributes should have been pushed thru to the ABAP system.
    However the valid from, accounting number and password have been updated as well.
    Thx,
    Laurent

  • How to make the prompt to pick the system date automatically at run time?

    Hi,
    I trying to create a publication for a report that has date prompt, When I try to schedule this publication  the query should automatically select system date for date prompt and and send out the report. Is there a way to do this in CMC?
    Thanks in advance
    Hema

    Hi Hema,
    You need to create this Exit Variable with the condition that it should be generated ias a optional variable in the universe.
    The reason for being is that when the prompt screen is appeared there is no default value which will be shown in the prompt. But when you press the run query button (will be enabled only after you make the prompt as optional) the BO query will fetch the data applying the restriction of the sysdate.
    I hope I have made myself clear.
    Regards,
    Rohit

  • How to run webi report automatically with the current date/system date in webi report

    Hi Friends,
    I have a webi report which has a date prompt now. Based on the selection that user makes while running a report, he will get the related data for that particular date selection. Now I want to make that date prompt automated that is the report should run automatically based on the system date daily on scheduling.
    I want it to run current day automatically without have to go in and pick the date in webi report. I will be scheduling the webi report. Can you please let me know how to achieve this functionality of running a webi report automatically with a system date.
    Please let me know if I couldn't make you understand so that I will write with an example.
    Waiting for your valuable solutions.
    Thanks in advance.
    Regards,
    Bhaskar

    Hello Bhasakar,
    1.Create sysdate object in the universe
    2.Create another query in webi and select only sysdate object
    3.In the original query drag the Day object in the filter pane and choose the "List of values" from another query.and select the sysdate object from the second query.
    So your report always will run for sysdate...
    regards,
    Naveen D

  • How can I set document date automatically as system date?

    I use FBV1, FBV2, F-02, FB02. Posting date is automatically set as system date. I want to set document date automatically as system date.
    How can I set document date automaticall as system date?
    Wbr.
    İlker Çokkeçeci
    Computer Engineer
    Ankara, Turkey

    Hi Expert,
    Please refer the below link..
    Document date to be defaulted as system date for all FI transactions
    as there mentioned, please go to T-Code: SHD0.
    Regards,
    GK
    SAP

Maybe you are looking for