Update terminated while doing KP26

hello, friends.
while doing KP26, the system terminated update with the following info (from ST22):
runtime error SAPSQL_ARRAY_INSERT_DUPREC
exceptions CX_SY_OPEN SQLDB
could anyone tell me why we are having this error?  does this have something to do with number ranges and how do we correct this?
many thanks.

Hi Deepa
I increased the number range for CO documents though it was not exhausted. Then the error disappeared and the documents were saved.
Thanks
Sanjay

Similar Messages

  • Update  terminated while doing migo , mb1a  .

    dear friends,
                      when i am doing migo , mb1a update of document is terminated.
                     I have checked sm13 .It is showing nothing.
                     There are no number range problem also.
                       plz help me why this problem occured. 
              Thanks in advance.
         waiting for your reply.
    Ajit Aitawade.

    Hi,
    While termination you might be gettng some message, share that message someone will help you.
    To my knowledge its better you discuss the problem with your system administrator you may get good result.
    CHeers!!
    VEnk@

  • Document express update terminated while doing delievery

    hi all
    I ve a problame when i am doing delievery with vl01n I am getting an erroe stating that document express trminated when i click the inbox it shows update was terminated
    user sap1
    transaction vl01n
    updatekey 01ab371d6f2b4161b1704e58d0026f71
    plz help me out

    Hi,
    As far as I know, this issue is usually related to BASIS. It comes when the update is not happening in the data base for that document. II used to get that issue several times. It was always related to BASIS since the database was either full or update in the data base was not happening.
    So check with your BASIS guy about this issue. He might be able to resolve it.
    Regards,
    Rohan

  • Express Document "Update was terminated" while doing MFBF

    Dear All ,
    We are facing one critical issue while postion GR/GI document through MFBF t.code. We are getting above subject message .
    We can able to see the document created but when we go back.. it put this DUMP.
    Some experts saying may be it is due to Outform issue .. unit of Measure mismatch or Number ranges etc.....
    one strange thing is it is only occur on a particular plant which is go live recently.
    Please if anyone face such kind of issue ..pls do me know let know
    Many thanks
    Neeraj ...

    Hello,
    Update terminated.... this error can be of temperory data base updation problem also. If it was a number range issue, it would have gone for dump. Wait for a while, if the issue is persisting, then check with your ABAP expert, he will debug the transaction and find out.
    Prase

  • Update terminated when doing VF01

    hello, friends.
    we have a situation where Billing type F2 settings were changed (using VOFA).  specifically, in field "Assignment" i specified "E" (billing document).  supposedly, the billing document number will be used as assignment allocation.  there are already billing documents created.
    when these settings were done, i started getting error message "express document update terminated".  the system says error has something to do with ABAP/4 processor CONVT_NO_NUMBER.
    when i execute ST22 or SM13 to look at the problem, it says the system cannot interpret "1111" which is why the update was terminated.  here, "1111" is the material number. 
    i tried switching the settings of F2 back to standard but the errors continue.
    why is the system getting the material number as number range?
    your help will be greatly appreciated.
    many thanks.
    jty

    hello, friend.
    i checked the other threads with similar subject, and i agree it may have something to do with number range.  but i checked the number range of the billing document and i'm not sure i have the exact issue.
    i suspect that when i changed the "Assignment" settings in VOFA, the synchronization with the Accounting Document (Allocation) number might have been affected.  when i repeatedly tried to create billing document with reference to the same delivery document, the system uses a new billing document number when saving, but then this is lost.
    would you think this is the more likely cause?
    thanks.
    jty

  • Update termination while creating billing

    Hi All,
    I have created adobe form and attached to one output type and when i am trying to create invoice from sales order system is giving updat termination message.
    Could  you please anyone tell me where is the exact problem in adobe form or in driver program.(Adobe form has been devloped in Finnish language )
    I checked SM13 and there i can see RV_MESSAGE_UPDATE function module with error description.From that I am not able to trace.
    Regards,
    Sachin

    Hi,
    Go to SM13 and check the exact code which caused the Update termination.
    You can see the place where you got the update termination.
    or
    Analyse the runtime error in ST22
    Thanks & regards.

  • Error"Update was terminated' while doing picking and data was not saved

    hi experts,
    I have created a sales order. for that i created a deliery.then i created shipment .and i have put pick qty and batch.
    it gives a message Express document " Updated was terminated "received from author XXXX.
    and picking is not saved and i'm not able to do PGI.
    Please help me.....
    Thanks in advance,
    ria

    Hai,
    Analyse this error in ST22 - ABAP runtime error or in SM13 - update request.The system will show the error update records in red color. Click the error & see the problem in funciton module.THis may be because of no ranges problem or any changes in print out program. Also if u have any BADI activation for the sale order & any changes in this program also leads to this error.

  • Update Termination while creating Material Master MM01

    Hello,
    While creating the Material Master system is throwing the error Update was Terminated.
    Before that we have client copied.
    Can anybody throw some light??
    Regards,
    Kumar Rayudu

    Hi,
    Check the material number ranges are copied ?
    in SPRO>LOGISTICS GENERAL>MAT.MASTER>BASIC SETTING>NUMBER RANGES FOR MAETRIAL TYPES
    BR
    Diwakar

  • SAP NOTE REQUIRED FOR UPDATE TERMINATION WHILE POSTING GR SUBCONTRACTING

    Hi all,
    Please treat this as very urgent...
    below is the dump error analysis
    Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
    Except.                CX_SY_OPEN_SQL_DB
    Date and Time          25.06.2008 07:27:03
    User and Transaction
         Client.............. 800
         User................ "EDWIN"
         Language key........ "E"
         Transaction......... "MIGO "
         Program............. "SAPLKAUP"
         Screen.............. "RSM13000 3000"
         Screen line......... 2
    Information on where terminated
         The termination occurred in the ABAP program "SAPLKAUP" in "INSERT_TAB
         The main program was "RSM13000 ".
         The termination occurred in line 464 of the source code of the (Includ
          program "LKAUPF01"
         of the source code of program "LKAUPF01" (when calling the editor 4640
         The program "SAPLKAUP" was started in the update system.
         Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" oc
          the
         procedure "INSERT_TABLES" "(FORM)" but was not handled locally, not de
          the
         RAISING clause of the procedure.
         The procedure is in the program "SAPLKAUP ". Its source code starts in
         of the (Include) program "LKAUPF01 ".

    hi buddy
    This kind of problem generally occures when you have not defined Number range. Please check the configuration. It may be due to insufficient catche memory. if so you may get it resolved with your basis person.
    regards
    kunal

  • How to update progressbar while doing serverside processing?

    Hi,
    I have the following use case:
    - When the user clicks a button a file must be downloaded. Because it can take some time before the server gathered the data, a progressindicator must be shown. After that the file is presented to the user.
    Currently, I have clientside javascript that shows the popup, and then queues a server event that starts the serverside processing. A poller is running that should keep track of the progress.
    My problem is that the popup only shows at the end of the serverside method. Also, the poller doesnt poll while the serverside method is executed, and resumes at the end of the serverside method execution. So even when the popup would show, it wouldnt properly display the progress.
    I have the following code:function showProgressPopup(event) {
                                var popup = AdfPage.PAGE.findComponent("pt:progressPopup");
                                var hints = {};
                                hints[AdfRichPopup.HINT_ALIGN] = AdfRichPopup.ALIGN_OVERLAP;
                                hints[AdfRichPopup.HINT_ALIGN_ID] = "pt:downloadButton";           
                                popup.show(hints);
                                var source = event.getSource();
                                AdfCustomEvent.queue(source, "startDownload", {}, false); //at this moment, popup should show and serverside processing starts
    <af:panelGroupLayout id="pgl6">
                    <af:poll id="poller"/>
                    <af:commandButton text="Download in Excel-formaat" id="downloadButton" partialSubmit="true">
                        <af:clientListener type="action" method="showProgressPopup"/>
                        <af:serverListener type="startDownload" method="#{CombinotaExportBean.startDownload}"/>
                    </af:commandButton>
                    <af:popup id="progressPopup" clientComponent="true">
                      <af:dialog id="downloadDialog" type="cancel" modal="true" closeIconVisible="false" title="Downloading..." partialTriggers="downloadButton poller">
                        <af:switcher id="downloadSwitcher" defaultFacet="showRunning"
                                     facetName="#{CombinotaExportBean.value == CombinotaExportBean.maximum ? 'showReady' : 'showRunning'}">
                          <f:facet name="showRunning">
                            <af:panelGroupLayout id="pgl7">
                              <af:panelHeader text="One moment please" id="ph3"/>
                              <af:progressIndicator id="progressIndicator" value="#{CombinotaExportBean}" partialTriggers="poller">
                                <af:outputFormatted styleUsage="instruction" value="Data is being collected..." id="of1"/>
                              </af:progressIndicator>
                            </af:panelGroupLayout>
                          </f:facet>
                          <f:facet name="showReady">
                            <af:goLink text="Click to download file" id="gl1" partialTriggers="poller" destination="#{CombinotaExportBean.downloadFile}">
                              <af:clientListener type="click" method="closeProgressPopup"/>
                            </af:goLink>
                          </f:facet>
                        </af:switcher>
                      </af:dialog>
                      <af:clientListener method="downloadDialogCanceled" type="popupCanceled"/>
                      <af:serverListener type="downloadCanceled" method="#{CombinotaExportBean.downloadCanceled}"/>
                    </af:popup>
                    </af:panelGroupLayout>When I start a new Thread in my serverside CombinotaExportBean.startDownload method, it works because then that method returns while the server is still processing. However then I have problems with quering my RowSetIterators, they start throwing NPE's. Multithreading is evil in webapps I guess.
    So how can I do this in one thread? How can I make sure my popup shows first, and my poller keeps polling while the server collects data?
    with kind regards,
    Gerben

    Hi Frank,
    Thanks for your suggestion. In my current implementation I'm basically using a animated image, because I'm now using the ProgressIndicator without BoundedRangeModel and then it just shows a running clock.
    However, in my case its quite easy to monitor the progress on the server thread. So I thought this is the typical use case for a real ProgressIndicator. Unfortunately I can only find 10g examples of the progress indicator and I dont get the 11g progressindicator to work like that. So what I am curious about is, if a typical ProgressIndicator use case is any different. And if there's any example of it, with or without the usage of the poller.
    I already found the answer to part of my question. If I set noResponseExpected to the serverevent, the client event finishes and is effective immediately, before the server event is finished:var source = event.getSource();
    var customEvent =  new AdfCustomEvent(source, "startDownload", {}, false);
    customEvent.noResponseExpected();
    customEvent.queue(true);with kind regards,
    Gerben

  • TS5329 i did an update on my sons phone and now it is in recovery mode and than refuses to reboot. says it can not restore? it was working fine until it called for this update and while doing it it went into recovery mode?! please help!!!

    i did an update on my sons iphone 4s and now it says it is in recovery mode and that it can not reboot or restore the phone?! it will not power down normal and keeps saying hook to itunes. all i did was an update and it went into recovery mode and will now not restore! how do i fix this???

    Do exactly as it says, connect to a computer running iTunes and restore.

  • Getting error [Program Terminated] while doing GR postings

    Dear All,
    Please help me out from this error. I get this error when I am going to do GR postings. Error Message is " Message_Type_X " short dump has not been completely stored.
    How I solve this error. Please help me.
    Thanks & Regards
    Prateek

    Hi
    The Error Analysis shows the reason behind the dump. Your screenshot shows in this case Message Class '/SAPSLL/PLUGINR3' and number 002.
    So the dump details and it is pointing that Global Trade Services (GTS) functionality is activated is your system.
    Should you be using SAP GTS? (or else you would have defined an Rfc destination for it).
    Please check customzing below and deactivate GTS connection to the ERP if necessary
    System:
    Possibility to deactivate the GTS transfers (if currently the transfer is active):
    General deactivation of GTS calls using following path in IMG:
    SAP Customizing Implementation Guide
    -> Sales and Distribution
      -> Foreign Trade/Customs
       -> SAP Global Trade Services - Plug-In
        -> Control Data for Transfer to SAP Global Trade Services
         -> Technical Activation of Document Transfer
    Here you find one activity for each application level:
    - Activate Transfer of Sales Documents (SD0A)
    - Activate Transfer of Outbound Deliveries (SD0B)
    - Activate Transfer of Billing Documents (SD0C)
    - Activate Transfer of Purchase Orders (MM0A)
    - Activate Transfer of Inbound Deliveries (MM0B)
    - Activate Transfer of Goods Movements (MM0C)
    If you execute these activities you are asked if you want to deactivate the implementation of BAdI implementations. This has to be confirmed with yes.
    Afterwards the GTS transfer is completely turned off and you will not receive any error messages.
    Please also check if you have any user exits activate that could be calling the GTS.

  • Update termination error while doing PGR

    Hi,
    I got this error while doing PGR, please do suggest the dolution.
    Update was terminated
    System ID....   DPT
    Client.......   900
    User.....   SDUSER
    Transaction..   VL02N
    Update key...   4BEAA8A2A6DA0609E1000000AC1107A7
    Generated....   12.05.2010, 18:38:55
    Completed....   12.05.2010, 18:38:56
    Error Info...   Update program: I/O error Error; function Update, RC= 4, key
    Thanks,
    Swapnil

    Hi Lakshmipathi,
    I have checked the analysis in SM13, got the folllowing,
    Function Module        SERIALNUMBER_POST
    Status                        Update was terminated
    Report                        LIEP1U01
    Row                            159
    Error details   Class:     IS         Number:    229
    Update program: I/O error Error; function Update, RC= 4, key

  • Update Termination Error while creating Delivery

    Hello Experts,
    I am trying to create delivery with reference to Standard Order when I click on SAVE I am getting message that delivery is being created. But when I am trying to open the same delivery in change mode I am getting Update termination Error saying delivery not created.
    So what I tried doing is while creating delivery I have given Picked quantity and done with PGI then i am able to save the Delivery successfully and table LIKP is also updated. But this is not always that I can do. In my production system, without doing PGI I should able to save Delivery.
    Please could anybody help me on this ..is there any SAP notes?
    PS: My system is upgraded from ECC 6.0  Ehp2 to ECC 6.0 Ehp7.
    Many Thanks in advance.
    Priyanka J.

    Hello Kiran, Hello Klaus,
    Below are the details;
    Function Module   
    RV_DELIVERIES_SAVE
    Status            
    Update was terminated
    Report            
    LV50UF0L
    Row               
    50
    Error details   Class:
    00    
    Number:
    671
    Internal session terminated with a runtime error POSTING_ILLEGAL_STATE
    MENT (see ST22)

  • Error while doing Challan updation

    Dear all,
       Iam getting error while doing Challan updation, system shows an error saying "No line Item exist for Challan updation" whereas iam having all the data but the system is not picking.
    pls help on this
    will get a good points for solving this

    I understood ur problem, u r running the J1INCHLN when u r running this program . Program chks both the Table BSEG & WITH_ITEM they 2 field from BSEG-BUZEI & WITH_ITEM -J_1IBUZEI . if this 2 line item is not matching then system will show the same error which u have mentioned.
    Whether this has occured first time or rarely it occurs, if first then just update the table WITH_ITEM for the field J_1IBUZEI with respect to BSEG-BUZEI for the TDS line item only. Make the changes with help of ur Internal consultant. write an update program.

Maybe you are looking for

  • Running a Java application from web browser

    Hi, I'm not sure if this is the right place to put this, and it probably isn't, but I don't really know what else to do at the moment. I have a problem. I've written all these nice and pretty Java applications that do all this complicated junk that m

  • I cannot install Itunes 10.1.1 on Windows 7 x64...

    Hi all!! I bought my ipod touch two days ago. But I cannot install iTunes on my pc. I downloaded Itunes for x64 pc and I ran it as admin. So it starts and it stops ends the installation process and saying me -in italian language- "Si sono verificati

  • How do I create a Favorites section in my Library for importing from my Desktop?

    How do I create Favorites in my Library so I have a shortcut for importing from my Desktop?

  • Needs to add DateTime Stamp in my table records

    Hi SAP Gurus I wanted to add a field in my table that will capture DateTime stamp for records creation. Could u pls let me know how can i do that. Thanks....

  • Debug IP error help

    Gurus, Using Ciscoview to monitor our 3750 switch, I noticed high IP error counts. After connecting to the box and issuing the "debug ip error" command the following output was displayed: "datagramsize=92, IP 27444: s=192.168.1.100(Vlan1), d=192.168.