Update termination in ME29N (Release PO)

Hi All,
I am getting an update termination mail to my sap mail box when I am trying to release one purchase order. " Error info... SO 451: Address <&> does not exist " (from mail) What might be the reasons?
Thanks in advance
jaison.

Hi Martin,
I checked in SM13. Error occured in function module RV_MESSAGE_UPDATE. Executed the transaction ME29N after putting break point in the function module. Flow control is not coming into RV_MESSAGE_UPDATE.
Regards
Jaison.

Similar Messages

Update termination in ME29N

Hi All,
I am getting an update termination mail to my sap mail box when I am trying to release one purchase order. " Error info... SO 451: Address <&> does not exist " (from mail) What might be the reasons?
Thanks in advance
jaison.

Please let me know if work flow is enabled in your system.
For some of this type of messages there are some SAP OSS notes available,
Pls check in service.sap.com

When releasing PO error occured Express Document " Update Terminated"

hi all
     i am getting a strange problem ,
while doing release of PO(purchase order) by t.code ME29N, i am able to release and SAVE it properly with out any error.
But when returning back to ME22N t.code to see that PO .
i am getting this error :
Note : - this error is coming for a particular TYPE of PO's and with
            in that TYPE all PO are not giving ERROR,
            Please tell me what can be reason,
Express Document "Update Terminated"
Runtime Error          POSTING_ILLEGAL_STATEMENT
       Occurred on     15.07.2008 at   11:03:24
Statement "CALL DIALOG" is not allowed in this form.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSTXW " had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Information on where terminated
The termination occurred in the ABAP program "SAPLSTXW " in "DISPLAY_OTF".
The main program was "RSM13000 ".
The termination occurred in line 82 of the source code of the (Include)
program "LSTXWU02 "
of the source code of program "LSTXWU02 " (when calling the editor 820).
The program "SAPLSTXW " was started in the update system.
000710
000720     if ( sy-binpt = false and
000730        ( ( cl_gui_object=>www_active = true or
000740            itcpp-tdscreen = 'ITS' ) or
000750          ( cl_gui_object=>javabean = true and
000760            itcpp-tdscabap = false ) ) ).
000770
000780       perform cc_display_pdf.
000790
000800     else.
000810
>       call dialog 'DISPLAY_OTF'                "ABAP-List-Preview
000830              exporting otf itcpp 0
000840            importing itcpp.
000850
000860     endif.
shall i concern this with BASIS person , coz every PO not having this problem,
i think it is related to time taken by SERVER for UPDATE is more then this error comes .
OR is there any technical issue related to ABAP.
regards
sachin

This problem will be caused by an output which will be triggered when releasing the PO. Check the messages in the PO for which one is causing the update error.
Regards,
John.

Update teminated message after releasing and saving PO

Hello Friends,
After releasing and saving PO in ME29N ...when pressing BACK button...i am getting a pop message with "updated terminated".
then i enter...in inbox the below message i am getting.
System ID....   DEV
Client.......   600
User.....   ABAP
Transaction..   ME29N
Update key...   BAC6150D3B4CE853F588CFC55F23
Generated....   17.04.2007, 11:08:13
Completed....   17.04.2007, 11:08:53
Error info...   00 671: ABAP/4 processor: PERFORM_TOO_MANY_PARAMETERS
Even I debugged ...with break point satement with 'message' but not able to capture the "updated terminated'.
Let me know how to sort this bug??
With Ever Smile & Warm Regards,
Madhu..!!

Hi,
Go to ST22 Transaction and Analyse the DUMP of this clearly in detail
and discuss the same with a MM functional consultant and solve the issue.
reward if useful
regards,
Anji

Update termination dump while saving sales order after updating billing pla

Hi,
Our client is facing a strange issue. The client has a sales order already created and WBS element assigned to it automatically. The sales order has many items, which are billed periodically. Whenever the particular item has to be billed. user attaches milestone in the project which is updated in the billing plan of the sales order. Then user goes into change view of sales order, and sees if the billing plan is getting updated. After user sees that billing plan is updated, he tries to save the sales order and the update termination dump comes.
We have analyzed this issue to some extent. Since the product hierarchy have been changed, the system checks for the duplicate records and throws the dump.
We have advised the user to follow following steps also:
   1) Delete existing billing plan if any assigned to the order. You can delete the billing plan by going into CJ20N and deleting the existing milestones completely.
   2) Please ensure network in project is release and sales order does not have credit block.
   3) Change Product Hierarchy in sales order (Please do not copy and paste from Material master instead select the same through F4 for each level.
   4) Once again create the milestones as required in the Project.
   5) We need to remove block of billing plan from Project only instead of from Order.
   6) Check order in display mode and ensure billing plan has appeared.
   7) Now goto change mode of the order and carry billing.
Above solution has solved the issue but sometimes it takes times for the above solution to work.
The user has to repeatedly follow above steps to save the billing plan.
We need to have permanent solution for the same. I would appreciate if anybody can help resolve this issue.
Thanks

Thanks All for providing me possible solutions.
The issue is resolved by one more step into what i had suggested in my questions
At step 3, after changing the product hierarchy, I simply go to billing plan tab, thereby generating billing plan even before I add milestones in the project.
To my understanding, generating billing plan in the sales order must be conflicting with the milestone being added to the billing plan from the project, giving 2 billing plan numbers in the background and throwing update termination dump.
Cheers!!

I get a message that says "This version of pre-release ios will expire in 7 days" What should I do? I am currently running ios 8 GM and I can't update to the public release version.

I get a message that says "This version of pre-release ios will expire in 7 days" What should I do? I am currently running ios 8 GM and I can't update to the public release version. I am stuck in the beta. Itunes will not let me restore my iphone or update it. PLZ HELP ME

Wondering if you have a current Backup on iTunes ...if yes you could put the iPhone in DFU Mode by holding the Home button while you plug in the lightning cable. Then you could Restore the iPhone to Factory Settings on 8.0.2 and after a full Restore go back and then Restore from your Backup. This happens every time a public release occurs. Many folks on the Golden Master or otherwise in the AppleSeed program with a Beta version for some reason don't move to the official release ...then the software time-bomb hits and they can't upgrade.

Update termination during Periodic Posting in RE-FX

Hi,
I am getting a update termination error -SAPSQL_ARRAY_INSERT_DUPREC during periodic posting for Lease Out Contract. Tcode - RERAPP
We use deferred tax. This functionality is used to transfer service tax
credit from interimn account to final account as applicable in India.
As suggested in the note 913805 by SAP we deleted the BTE's in application Key FI-TAX
Inspite of that we get the same update error.
Also we observed that after deleting the BTE's our service tax credit
functionality is also not working.
Further I have observed the following:
I am getting error only while posting contracts with service tax.
Tax Code L1 Account Key OS1 & OS2 & OS3
Please help me in finding a soultion to this.
Thanks & Regards
Sanjay

Hi,
The transfer step will transfer controlling assignments from the contract to the rental objects. This is useful if you want to run the controlling reports in order to see a P&L statement for a Building for example.
Regards,

Update termination error at the time of order creation and chamge?

Dear gurus,
Facing an error at the time of creation of order.
system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
please treat on priority
regards,
krai

Hi,
Goto ST22 T.Code and analyse the error.The error message why it is terminated will be displayed here.
Or go to SBWP T.Code in the user where you got this error and check the inbox.
It will display why the error is appearing.
Show the same to the ABAPer and ask them to work on it.
I think your server may be slow and it will take some time to update the order created by you.But I am not sure.Check the error message.
Regards,
Krishna.

Update termination error at the time of order creation

Dear gurus,
Facing an error at the time of creation of order.
system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
please treat on priority
regards,
krai

Hello ,
"Update terminated " error has two reasongs.
First is system update was not active and hence terminated
For this to check Goto the transaction code SM13 and check whether the SYSTEM UPDATE is active or not.
If it is active ,
Then click on the Option TOBE updated in the status and execute, then in the next screen you can find some list of documents that are not updated and causing error .
Click on MODULES in the screen and find the erro which causing this error.
Most this kind of error will happen if something in the Funcion Module or USER EXIT is missing.
Please check and revert back if you need further details
Also check the link
http://help.sap.com/saphelp_nw04/helpdata/en/e5/de870535cd11d3acb00000e83539c3/frameset.htm
regards,
santosh

While saving service work order Update termination

Hi Friends,
We have a service order integration with Notifications. First we create a Notification and in turn create as service order.
When the order is saved it goes for a update termination and the error message is " 00 671: ABAP/4 processor: DBIF_RSQL_INVALID_RSQL " for IW52 transaction. Actually when we save it provides the order number but never gets updated in the data base.
Again when we create the order from Notification for the second time, order gets created by skipping a number. For example when we save the order if the ordewr number is 902345 where it is not created , then when we create again the order number is 902346.
Have any one come across such terminations in IW52 for IW32?
Regards,
Selva

Friends,
At last my problem was resolved as it was escalated to SAP and SAP analysed as below,
This problem is caused becuase of the error in database interface. As the database server and the application server is a mix of platforms with different internal character data representations, this error occurs,
The work around solution as narrated below,
" For this we need to set the following parameters on the Default and Instance Profiles:
Profile Name                            Parameter name         Current Value     Recomm by SAP
DEFAULT.PFL                           rdisp/vbname              not set           rdisp/vbname=$(rdisp/myname)
CRH DVEBMGS00 cr1apod        rdisp/wp no vb               2                  Greater than 0
CRH DVEBMGS00 cr1apod        rdisp/vb dispatching        1                  Set to 0
crap0 CRH 20                            rdisp/wp no vb                4                  Greater than 0
crap0 CRH 20                            rdisp/vb dispatching        1                  Set to 0
Inorder to reflect all the changes, System CRH-202 needs to be restarted. Basis have done the above changes through T.Code: RZ11 and CRH indicates the Quality client.
So the profile paprameters will be different in each of SAP systems.
Hope this will be very useful for future reference to all of us.
Regards,
selva

STATUS_UPDATE error to update USER STATUS - Update termination error

Hi All,
I am using status_update FM in sales order user exit MV45AFZZ in a perform routine for updating user status in line item for sales order. There are 4 custom statuses created for the sales order line item. 1,2 3, and 4 by configuration. My job is to select one of those based on user selection.
Scenario: During change order process using VA02, I have to change the existing status to a third status when user selects the second one. That is for example, in VA02, user selects status 4 from previous status 3, and save, I have to make the status 4 inactive and save the new status 2 instead of 3 though user selected 3. How do I achieve this.? ????Any programming example is really appreciated. Thanks!!!
I am right now using STATUS_READ and reading the existing status 4. Then making it inactive using status_update FM. And updating the new status 2 as active one and 3 as inactive again. Two inactive updates and one active update is throwing an update termination error while saving the sales order.
Any help is really appreciated.
Thanks
Ricky

Hi ricky,
For saving any changes you need to have a Z-table.
In programs we can't store the user selection. In your case you can create a z-table and store the status there and delete the last status. The process would be faster as you will always have one record in the table.
. One more advantage is you can even track the changes through the Z-table(User who is changing it.)
Hope this solution will surely help you.
Cheers
Suvi

FSCM via WS-RM (without PI ) - Update termination issue

Hello experts .
We are trying to integrate SD with FSCM ( credit management) using WS-RM (without PI).
Details of the issue and steps followed so far.
Ideal Scenario :
Once we create / change a sales order ( in SD ) , the interface Creditworthinessquery_out (WS Consumer ) gets triggered (in SD) and the subsequent response CREDITWORTHINESSQUERY_IN(Provider) is triggered from FSCM (with the details of creditworthiness).Once the query response in received an notification is triggered from SD to FSCM (asynchronous service).
After receiving the query response the functionality of credit check happens while creating / changing the sales order .
Configuration steps followed in SOAMANAGER
We have created end points for all the relevant service interfaces (Providers) , and also created logical ports for the respective consumers.
During the creation of logical ports - for the consumers we used the WSDL (of the providers) as the inbound message action.
(This has been done to all the services query , notification that are relevant in our integration).
Current behavior / issue .
While creating sales order the sales order is not getting saved (getting updated in the database).System allows us to complete the sales order creation process and also we get a message as sales order saved successfully. But then there is a update terminated express document that pops up. Sales order is not getting updated in the database.
When I see the logs/traces in SOAMANAGER I see that the query out is successful , query in has the right response (in warning state though) . But no notification is being triggered ?? 
How to overcome this update termination issue ?
When we see the SM13 log , it points to SLD issue (LCR 010: Internal error in SLD API). why do we need a SLD without PI

Hi ,
Finally we are able to solve the update termination issue . But again we are using a work around .
Situation :
Once we executed the VA01 transaction we were getting update termination issue . After lots of debuggung we found that system was trying to get the Business system details ( Own business system data ) . The table lcrt_clntcache had no values.
Solution
We inserted appropriate values in the Table LCRT_CLNTCACH (business system data ) and now it works .This is a work around we got as of now.Credit checks are happening successfully and also integration is good .
(typically if we define business system in SLD (PI) , and run SLD_CHECK , this table gets populated , but in our case we are not using PI instead we are using WS-RM)
But now few questions arise .
a) Why do we need a business system in case we are not using PI ( typically we define business system and technical system in PI ) and instead using WS-RM ?
b) Is it a good practice to update the table ( as did in workaround above )?
c) Is this any bug and needs to be consulted with SAP ?
Please let me know your views .
Edited by: Vedula Adeep on Jan 16, 2012 8:42 AM

Integrating SD with FSCM using WS-RM - Update Termination error

Hello experts .
We are trying to integrate SD with FSCM ( credit management) using WS-RM (without PI).
Details of the issue and steps followed so far.
Ideal Scenario :
Once we create / change a sales order ( in SD ) , the interface Creditworthinessquery_out (WS Consumer ) gets triggered (in SD) and the subsequent response CREDITWORTHINESSQUERY_IN(Provider) is triggered from FSCM (with the details of creditworthiness).Once the query response in received an notification is triggered from SD to FSCM (asynchronous service).
After receiving the query response the functionality of credit check happens while creating / changing the sales order .
Configuration steps followed in SOAMANAGER
We have created end points for all the relevant service interfaces (Providers) , and also created logical ports for the respective consumers.
During the creation of logical ports - for the consumers we used the WSDL (of the providers) as the inbound message action.
(This has been done to all the services query , notification that are relevant in our integration).
Current behavior / issue .
While creating sales order the sales order is not getting saved (getting updated in the database).System allows us to complete the sales order creation process and also we get a message as sales order saved successfully. But then there is a update terminated express document that pops up. Sales order is not getting updated in the database.
When I see the logs/traces in SOAMANAGER I see that the query out is successful , query in has the right response (in warning state though) . But no notification is being triggered ?? 
How to overcome this update termination issue ?
When we see the SM13 log , it points to SLD issue (LCR 010: Internal error in SLD API). why do we need a SLD without PI ?

Hi ,
Can you tell me more details of how you are testing this ? I was successfully able to impilment this solution (credit management using ws-rm in ehp5). If you can give me more details i can surely try to help .

F-44 Vendor Clearing Update Terminated

Dear All,
              When we try clearing Open Line Items of a particular Vendor, system posts the document but eventually produces an ABAP RunTIme Error with Update Terminated Error. The line items remain as open items instead of getting cleared.The Dump Details are:
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLJ1IDEFTAX" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
The termination occurred in the ABAP program "SAPLJ1IDEFTAX" in
"J_1I_POST_DEFTAX_ITEM".
The main program was "RSM13000 ".
The termination occurred in line 44 of the source code of the (Include)
program "LJ1IDEFTAXU04"
of the source code of program "LJ1IDEFTAXU04" (when calling the editor 440).
The program "SAPLJ1IDEFTAX" was started in the update system.
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "J_1I_POST_DEFTAX_ITEM" "(FUNCTION)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLJ1IDEFTAX ". Its source code starts in
line 7
of the (Include) program "LJ1IDEFTAX$04 ".
DATA ls_deftax_item_insert TYPE J_1IDEFTAX_IT.
LOOP AT it_deftax_item_insert INTO ls_deftax_item_insert.
    IF ls_deftax_item_insert-line_type IS INITIAL.
      message x025(DEFTAX) with sy-tcode
                                       'NO_LINE_TYPE'
                                       'DEFTAX_ITEM'
                                       'FI_POST_DEFTAX_ITEM'.
    ENDIF.
ENDLOOP.
IF NOT it_deftax_item_insert[] IS INITIAL.
    INSERT J_1IDEFTAX_IT FROM TABLE it_deftax_item_insert.
ENDIF.
IF NOT it_deftax_item_update[] IS INITIAL.
    UPDATE J_1IDEFTAX_IT FROM TABLE it_deftax_item_update.
ENDIF.
ENDFUNCTION.
Is anybody aware of any solution or note related to this.
Regards,
Sonali.

Hi Sonali,
       This error due to Some text objects and messages are missed in consolidation system. Please take help of the basis consultant and implement the support packages 932658 & 932659
Regards,
Srinivas Muthyala

Update termination in Transaction ME9F

Hello MM Guru’s,
I would like to inform you that we are observing update termination in transaction ME9F for a particular user repeatedly in production environment.
Error in Functional Module: RV_MESSAGE_UPDATE
Error Message: WHT type Z4 missing in vendor master XXXXXXXX
When I check in vendor master data Indicator for withholding tax type Z4 already maintained.
It was strange why when users execute transaction ME9F the above updates terminate happens in the system.
I got a similar issue earlier where at that time Indicator for withholding tax type not maintained in vendor master data and I have informed business to maintain and re execute the transaction ME9F.
Request you to help me on this issue as I said this is a repeated one which is occurring for a particular user and I need to fix it by taking your valuable input.
Revert back in case you need any information required from my end.
Cheers,
Kumar S

Hello Bijay
I was asking you about my analysis (2 different users access ME9F for the same PO) done along with ABAPer whether its correct or not.
In your earlier response you have not responded to my analysis instead you are replying me that experts cant access my system.
I very well understand that our Experts cant access my system but they are always helping me for my all issues with their valuable input.
We just wanted to know whether we are deviating from the issue in this case.
I have also checked what other experts like Jurgen/AKPT & Mallinath suggested me and the analysis given below,
To inform experts that we never use custom print program and we are using standard SAPFM06P print program.But the layout is custom according to our business requirement.
Let me know still you need any clarification from my end.
Regards,
Kumar.S

Update termination in ME29N (Release PO)

Similar Messages

Maybe you are looking for