Update Time confirmation and Long text of Work Order in single FM or BAPI
Hi,
I would like to know, which standard FM or BAPI will update the longtext along with the confirmation text while doing the time confirmation of a work order.
I have tried with standard BAPI BAPI_ALM_CONF_CREATE for updating the time confirmation. This is updating the time and confirmation text properly but not the long text. I would like to know how can I update the long text while doing the time confirmation. Is there any other standard FM/BAPI will update both?
Thanks in Advance,
Mohan.
There is no standard SAP enhancement we can use for this purpose.
We have developed another program to maintian the long text in production order.
This call can be closed.
Cheers,
Qiang
Similar Messages
-
Transaction to Mass Update Header and Item text in Purchase Order
Dear All
Whether any Transaction in SAP to mass update the Header and Item text in Purchase Order.
One Single Text For Ex :" This is a Dummy PO" .
This text needs to be updated in large number of POs.
Please let me know your views
Reg
ShyamHi Shyam,
You can make use of BAPI_PO_CHANGE for this. See the documentation of this BAPI in SE37 for more information.
"You can transfer header and item texts in the PoTextHeader and PoTextItem tables. You import texts
for services in the PoServicesText table. Texts can only be replaced complete."
Regards,
Purnima. -
i am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!
Sometimes and this is network dependant if they suspect the phone to be lost or stolen as in this case with change of Sim card and provider then the origonal network can and some will block the phone untill you have rang them and proven it's not the case or if you have bough this 2nd hand then the origonal seller may have stopped paying the contract bill and thus the phone is blocked
-
Update Long Text of Production Order
Hi ABAP Gurus,
We want to update some information in long text automatically while releasing production order.
We try PPCO0007
We found that we must update AUFK-LTEXT as 'E' then we can see long text via CO02, CO03.
Without updating AUFK-LTEXT, even if the long text value saved in SXTL, but it can not be displayed via CO02, CO03.
After saving the text using 'SAVE_TEXT' function module and commiting it we update the 'ltext' field in AUFK table.
SELECT SINGLE * INTO wa_aufk FROM aufk WHERE aufnr EQ '000012345678'.
wa_aufk-ltext = 'D'.
MODIFY aufk FROM wa_aufk.
However, it only works when we go to CO02 and press 'Save' button without changing anything.
If we press 'release' button, AUFK-LTEXT will be overwritten by system. >_<
What we expect system to do is that when we release production order, AUFK-LTEXT can be changed to 'E', so that we can display long text via CO02, CO03.
Please help.
Cheers,
QiangThere is no standard SAP enhancement we can use for this purpose.
We have developed another program to maintian the long text in production order.
This call can be closed.
Cheers,
Qiang -
DataSource has to be replicated (time stamp, see long text)
Hi Experts,
in Production i am getting an error like below
DataSource has to be replicated (time stamp, see long text)
@5C@ Errors in source system @35@
Message no. R3016
Diagnosis
DataSource 8ZCRFAC03 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.04.2011 12:56:44.
The time stamp in the BW system is 19.04.2011 12:29:02.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
i replicated data source and activated transfer rules giving source system and infosource but still it is failing with same message
what went wrong not able to understand
Please help,
Thanks in Advance
NityaSeems to be an incorrect transport sequence:
1. First transport you DS from source system R/3 QA to R/3 Prd
2. Once it is successfully transported to R/3 PRD, Replicate DS in BI PRD
4. Now try to collect your infosource, DS, TR in transport request & try to transport it from BI QA to BI PRD.
5. Once it is successfully replicated in Production try Running the loads
It should work.
Regards
Raj -
Mass upload of characteristics and long text for Object Links in DIR
hello all
I want to upload characteristics and long text of Linked Objects in Documents: i wanted to use BAPI_OBJCL_CHANGE and family but, it is a class that is on a different level than the DIR as it does not belong to the DIR directly, but to objects that are linked TO the dir, via the tab linked object.
any idea on how I can do that?
LSMW and recordings do not work (or at least I did not find a way to make them work);
have you encountered such a situation?
thanksDear,
After call BAPI call also
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING wait = 'X'.
Please refer this thread also,
BAPI_OBJCL_CHANGE.
Regards,
R.Brahmankar -
DataSource 8ABCD_K01 has to be replicated (time stamp, see long text)
Hi,
We copied SCM production system to SCM quality system and after that I tried to run forecast process chain.
I got the following error message when process chain tried to extract sales history and failed:
DataSource 8ABCD_K01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 8ABCD_K01 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.12.2008 23:55:19.
The time stamp in the BW system is 01.07.2008 01:51:43.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Errors in source system
Message no. RSM340
I never did this activity (data source replication)before.I'll appreciate if somebody can help me and provide step by step process to how to do it?
Thanks
KumarThanks for prompt respons Julien.
STEP1:
In SCM quality system, I went in RSA1-- > Infoprovider-> Data source->Right click there --->replicate metadata
got popup message :
Message no. TK730
Diagnosis
In this logon client, any changes to the Repository and to cross-client Customizing objects are prohibited.
System Response
The function terminates
Procedure
If you still want to make the changes, contact the system administrator, who can allocate you a user in a client where you can make the changes.
STEP2:
When I ran the program RS_TRANSTRU_ACTIVATE_ALL ,
entered source system : BW....CLNT...
Infosource : 8ABCD_K01
got following log :
No Transfer Structure Selected
Message no. RSAR051
Do I need to do run data source replication process in SCM developement and then trasport to quality? Is there any pre/post requisite or step i missed.
Thanks -
Short Text and Long Text for WBS
HI All,
I am working on Interface Project where I need to enter Short description and long text for a WBS with external text.
Let me know if any FM Module is exist for same where I can Put this Short Description and Long Text seprately for a WBS Element.
Regards,
Atul R. RajmaneHi Atul,
I think you can enter short description & long text seprately for a WBS while creating entire struture of project in PS only. I don't think other than PS you will be able to enter short & long text for individual WBS.
Regards,
Sandeep -
Difference betwen short text and long text
Hi,
what is the difference between short text, long text and variant.Hi,
Short text is the short description you give for an object or field simlarly long text is the long description for a object or field.
Short text cannot have lenght more than 20 and long text more than 60.
Variant means for example if you give certain values as an input in one of your transaction for testing and you want the same values to be used every time you test in that particular screen, then instead of inputting the values again n again you call the variant.
Hope this helps
Assign points if useful
Regards,
venkat -
Showing short , medium and long texts together
Hi,
I have 0material and have navigational attribute -subdivision.
I need subdivision to be seen in the report as following
<b>KEY | TEXT SHORT | TEXT LONG</b>
is there a way to show those together in Reporting?
I know i can show KEY- SHORT TEXT or KEY-LONG TEXT but they are not useful for me.
Regards
MeteHi Mete,
you need to add the subdivision as infoprovider. Create a infosource just for subdivision and short and long text. Assign the text datasource to that infosource. Add 0txtsh and 0txtlg as attributes to the subdivision. Create a update rule from your new infosource to subdivision and update the subdivision and txtsh and txslg. But here you need to concentrate on just one language. Additonally post that new infosource to the texts as well providing the language key as well.
regards
Siggi -
Display short, medium, and long text in a query
Hi all, we have a requirement to display the short, medium, and long text of an info-object in our queries. Currently, it seems that you can only select one text lenght at a time but not all three of them together. Aside from creating texts as attributes, is there a way to display all of the texts of an info-object?
For example, we have internal orders with 3 texts. When we run the query, we need to see the order number, then the short text, medium text, and long text. Is this possible?
thanks
Kory Squireyeah you are right, we can get all the texts as attributes. Other than that you can only get any one of them.
-
Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work. I use windows 7. Thanks!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
PO for item of service Level short and long text using sap script
Please let me know how to do the PO for item of service Level short and long text using sap script.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on May 5, 2009 10:25 AMHi ,
In the transaction related to PO select the path goto->header texts and then details of the texts like ID,objectname,language,name.Pass all theses details to 'READ_TEXT ' FM. Then you will get text lines described for a perticular Po ,similarly for item also.
Thanks,
Suma. -
In ECC6,how to use tcode se63 to translate short and long texts?
In sap 4.6c, I know how to use tcode se63 to translate short and long text. However, in ecc6,when i use se63 to translate abap data element short texts, i cannot save it .A error message appare: Could not save target text Message no. SKTY000.
Can any body help me?Hi,
This is because o source language must be different from target language.
regards,
Eduardo Marcelino -
Creation of short text and long text?
Hi,
We create short text by using oe_fnd_attachments_pub.create_short_text_document and oe_fnd_attachments_pub.add_attachment API and to create long text we use fnd_documents_pkg.insert_row .
Why is it that we have different approaches for creation of short text and long text?
I know that oe_fnd_attachments_pub.add_attachment is used to attach a short text to some entity,but then why we dont do the same for long text?
Please lemme knw urgently ...
Thanks and Regards
AmarThanks for the help,
I looked into the document and i got to know few things as to how short and long text are created, but can u tell when the records are inserted into fnd_attached_documents, because i can see that records are inserted into fnd_attached_short_text and fnd_attached_long_text, fnd_documents but i dont see any insertion into fnd_attached_documents, can u lemme knw how and when it is done?
Maybe you are looking for
-
Report does not return all data in SSRS
Hello All I have been developing a report in SSRS, and i have a few filters applied to it. The only thing that i have in the Query that brings everything to my main dataset is the Date filter. @startDate, @endDate. When i run the query in Management
-
CS4 - is encountering a problem and needs to close
Hello from Africa We have a newish computer system which is not connected to the internet ( photography only,, Windows XP, 2 monitors) and this evening we installed CS4, and un-installed CS3. When we try to open Photoshop the following message appea
-
with the latest playbook update along with x pdf reader and the latest air browser, once browse pdf using unicode encoding for file that has non Enlish. I have tested with tradition chinese pdf files. utf-8 or other coding do not work. as for most t
-
How to set up my macbook mid 2009 osx leopard to mountain lion?
I was just given a MacBook mid 2009 Serial# MC240LL/A and it was master reset so its on Mac OS X version 10.5.8 and i need to get it to the latest software possible, but there is no app store and itunes doesnt work please HELP!
-
Whre can I get these packages for linux?
Hi, I installed OWB in Linux Server. Database oracle10g, Workflow server 2.6.3 are installed on Linux server. Now I want to install OEM in Linux server. While I am trying to install OEM, it is showing that, the prerequisites are not satisfied. Oracle