Updating Salespersons in Multi-Org Environment

Has anyone devised an easy way to update salespersons in a Multi-Org Environment? The application requires you to update the salesperson at the address site level and frequent changes in personnel can force massive amounts of data entry time.
Any ideas?

Hi
I have a setup document for R12 AME regarding invoice approval process.
However i need to find out if i have the same for R11i.
I am not sure whether R12 ame approval doc will be of any help for you, however i can forward you the same if you need it.
Thanks
Manish Jain.

Similar Messages

  • Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

    Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
    SELECT po_header_id, segment1, type_lookup_code
    FROM po_headers
    WHERE segment1 = '5000002'
    Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
    EXEC mo_global.set_policy_context('S',129)
    But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
    ===========
    I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
    I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
    Please suggest. Appreciate your response.
    Thanks,
    Kesava Chunduri

    Hi Hussein,
    Thanks for the quick response.
    Yes, I've gone thru both the notes specified below:
    Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
    - Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
    - For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
    I am able to create the receipt, when i remove this profile option.
    No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
    - I see that the products i am running these reports from AR/GL - already exists in these tables.
    Anything other options??
    Thanks,
    Kesava

  • How to run OBIEE Reports in Multi-Org Environment?

    How to run OBIEE Reports in Multi-Org Environment of EBS.

    hi Rainer,
    My Forms and Reports Server is in Same System only. Actually i am giving this path
    http://vagee.ail/reports/rwservlet?
    server=rep_vagee_oracle10g_apps_server&report=D:\FP2
    \dealer_reports\oc_dealer.rep&userid=fp2/fp2erp@info
    &destype=cache&desformat=pdf&ODSNO=OC0809/00110&branch=DLR002
    In My AS System Running Successfully. But Client systems Page cannot be display message is displaying.
    but generally i m able to access the reports server using this path
    http://vagee.ail/reports/rwservlet?
    then Reports server page is displaying but
    when i specify that report server name
    http://vagee.ail/reports/rwservlet?server=rep_vagee_oracle10g_apps_server
    page cannot be displayed.
    what will be the problem. please help me. thank you.
    Regards,
    Kalyan.

  • Apps 11i  SET_CLIENT_INFO in Multi-Org environment

    How do you set the client info (dbms_application_info.set_client_info) in a portal session so reports have access to correct Operations ORG data in a multi-org environment

    Hi Hussein,
    Thanks for the quick response.
    Yes, I've gone thru both the notes specified below:
    Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
    - Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
    - For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
    I am able to create the receipt, when i remove this profile option.
    No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
    - I see that the products i am running these reports from AR/GL - already exists in these tables.
    Anything other options??
    Thanks,
    Kesava

  • Subledger Period Maintenace in Multi-Org Environment

    Just upgraded to 11.5.9, enabled multi-org to add another operating unit but share the same GL set of books. If I close the period for one operating unit for either AP or AR, the periods also close in the other operating unit. Is there any way to separate the subledger closing process for both operating units?

    Hi
    I have a setup document for R12 AME regarding invoice approval process.
    However i need to find out if i have the same for R11i.
    I am not sure whether R12 ame approval doc will be of any help for you, however i can forward you the same if you need it.
    Thanks
    Manish Jain.

  • Reports 2.5 / Multi Org?

    A Partner asked the following question:
    "I have been designing custom reports for a client using Reports 2.5 which are then implemented in Oracle Financials. The client has now moved to a Multi Org environment. What do I need to do to my reports to get them working with Multi Org?"
    This does not sound like a Reports question, per se. Does anybody have experience with this and can offer suggestions? Thanks.

    Oracle Financials requires the user environment to be set.
    Add the following calls into the Before & After report triggers.
    Before Report Trigger
    SRW.USER_EXIT('FND SRWINIT');
    After Report Trigger
    SRW.USER_EXIT('FND SRWEXIT');
    Also all select statements should use the multi org tables (_ALL) eg po_headers_all.

  • 11i Multi-Org

    Is anyone on this list live on 11i OM and shipping in a multi-org environment? If so, I would like to pick your brain about a few things.
    Thanks,
    Steve

    Steve,
    I wouldn't say we are "live", but we will be in April.
    We are extreemly concerned about performace of OM. Especially the "configure" step and the "book" step in entering the order. Deep or complex BOM's are taking 50 - 60 seconds to configure.
    We are upgrading from 10.7 mulitorg.
    What is your issue?
    null

  • Multi Org Reports

    I am developing reports in Developer 2000, Reports 2.5 that are implemented in Oracle Financials. We have moved to a Multi Org environment, as a result I can no longer see any data in reports that use views. What steps need to be taken to correct this. This is of high priority. Thanks in advance for your help.
    null

    Oracle Financials requires the user environment to be set.
    Add the following calls into the Before & After report triggers.
    Before Report Trigger
    SRW.USER_EXIT('FND SRWINIT');
    After Report Trigger
    SRW.USER_EXIT('FND SRWEXIT');
    Also all select statements should use the multi org tables (_ALL) eg po_headers_all.

  • Preventing Item On Hand reservation in a configure to order environment for multi org same OU environment

    I have a scenario in a configure to order environment where I want to automatically creating flow schedules based on sales order demand. I have two orgs in same OU.
    1. How to setup sales order line to generate flow schedules in the manufacturing org and then ship the finished goods from the shipping org. I believe this can be done from sourcing rules to populate Warehouse field in sales order line with the shipping org and create Flow schedule in another manufacturing org. Please advise ?
    2. Once flow schedule is completed I want to prevent the reservation of Finished good on hand against Sales order so that the On hand could be transferred to shipping org and shipped. Please advise ?
    Thanks for your inputs.
    Best,
    Rajesh

    Pl do not post duplicates - Preventing Item On Hand reservation in a configure to order environment for multi org same OU environment

  • How to make Sales Person LOV org specific in case of Multi Org Setup

    HI,
    We are working on 11.5.10.2
    We have a multi org setup and i am required to make the sales person LOV to populate only the org specific salespersons, at the sales order, quote, service contract levels.
    Is it achiveable and if yes.....please letme know the way.
    Reg,
    Ajay Agarwal.

    Hi
    Try to play around with the security profile in the HRMS and attach it to the responsibility level
    Regards
    Ramesh Kumar S

  • Multi Org Access Problem in Oracle Alerts

    Hi All,
    I created one Alert for sending an email through Oracle Alert, after sending the mail I need to update one column in the table to indicate that alert has been sent for this particular row.
    Alert is sending mail correctly but it goes to update statement it throws following error:
    PL/SQL procedure successfully completed.
    BEGIN MO_GLOBAL.SET_ORG_ACCESS(0, null,'M'); END;
    ERROR at line 1:
    ORA-20001: APP-FND-02901: You do not have access privilege to any operating
    unit. Please check if your profile option MO: Security Profile includes any
    operating unit or the profile option MO: Operating Unit is set.
    ORA-06512: at "APPS.APP_EXCEPTION", line 72
    ORA-06512: at "APPS.MO_GLOBAL", line 638
    ORA-06512: at line 1
    APP-ALR-04020: Oracle Alert was unable to execute "&VALUE". Check that this file exists and that its read protection is set correctly.
    both the profiles MO: Security Profile, MO: Operating Unit are alredy set but still I'm getting error.
    My alert's update is simple update stement on custom table, Please guide.
    Thanks in advance.
    Regards,
    Reetesh Sharma

    Hi Reetesh ;
    What is your OS and EBS level?
    please check below Notes:
    APP-FND-02901 error when trying to open OM Forms [ID 887512.1]
    Convert to Multi-Org: Oracle error 20001:ORA-20001:Error occured during product initialization for MO [ID 413031.1]
    XLAACCPB - Create Accounting Program fails with Oracle error -20001: ORA-20001: APP-FND-02901: You do not have access privilege to any operating unit [ID 753824.1]
    When Running Concurrent Programs Get Oracle error -20001: ORA-20001: APP-FND-02901, Why? [ID 1061434.1]
    Accessing Responsibilities after Applying Patchset Gives Ora-20001 on MO:Security Profile [ID 199842.1]
    Hope it helps
    Regard
    Helios

  • List partitioning multi-org tables

    Hi
    I am doing list partitioning on receivables multi-org tables on org_id column. Running into a performance problem with multi org views. The multi-org views for receivables tables are defined like below with a nvl condition on org_id (partitioned column) in their where clause
    create or replace ra_customer_trx
    select select * from ra_customer_trx_all
    WHERE NVL(ORG_ID,NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV ('CLIENT_INFO'),1,1), ' ', NULL, SUBSTRB(USERENV ('CLIENT_INFO'),1,10))),-99)) = NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV ('CLIENT_INFO'),1,1), ' ', NULL, SUBSTRB(USERENV ('CLIENT_INFO'),1,10))),-99)
    Queries against the view are doing all partition scan when I exptected partition pruning to kick in and the query goes only against the spefific partition.
    select count(1) from ra_customer_trx ---- does all partition scan
    select count(1) from ra_customer_trx_all where org_id = <> ---- does single partition scan, works well.
    When I recreate the view with out any function calls on the org_id column partition pruning happens.
    In a non partitioned environment which has an index on org_id column, both the above sqls use the index and yield same result.
    So my questions are -
    1. Is there a way to get around this problem without having to modify the oracle supplied multi-org views? Any options I can supply in the partition script?
    2. In a non-partitioned env, with an index on org_id how is the optmizer able to go against the index and where as it is not able to in partitioned environment..? Both these envs has the same view definition with NVL(org.......) consition.
    Does anyone have any suggestions?
    Thank you.

    user2317378 wrote:
    1. Is there a way to get around this problem without having to modify the oracle supplied multi-org views? Any options I can supply in the partition script?You mean to say that the expression used in the view belongs to some Oracle supplied schema, like APPS? Or is this a view you've created yourself?
    Can you show us the output of EXPLAIN PLAN using DBMS_XPLAN.DISPLAY when querying the view? Use the \ tag before and after to use proper formatting in fixed font.
    Please make sure that the "Predicate Information" section below the plan is also included in your post. If it is missing your plan table is old and needs to be upgraded using $ORACLE_HOME/rdbms/admin/utlxplan.sql or dropped if you're in 10g which provides a system wide PLAN_TABLE.
    2. In a non-partitioned env, with an index on org_id how is the optmizer able to go against the index and where as it is not able to in partitioned environment..? Both these envs has the same view definition with NVL(org.......) consition.
    These are two different questions. One is about partition pruning not taking place, the other one about an index not being used.
    Can you show us the output of EXPLAIN PLAN using DBMS_XPLAN.DISPLAY when querying the unpartitioned example? Use the \ tag before and after to use proper formatting in fixed font.
    Please make sure that the "Predicate Information" section below the plan is also included in your post. If it is missing your plan table is old and needs to be upgraded using $ORACLE_HOME/rdbms/admin/utlxplan.sql or dropped if you're in 10g which provides a system wide PLAN_TABLE.
    It would be interesting to know how Oracle can use the index given the complex expression in the WHERE clause.
    Regards,
    Randolf
    Oracle related stuff blog:
    http://oracle-randolf.blogspot.com/
    SQLTools++ for Oracle (Open source Oracle GUI for Windows):
    http://www.sqltools-plusplus.org:7676/
    http://sourceforge.net/projects/sqlt-pp/

  • Converting to Multi org

    Hi All,
    We have our production running on Oracle Applications 11.5.10.2 with 10g database, HRMS,payroll modules. We are planning for R12 upgrade and as a prerequisite we are analyzing about the multi org conversion. We are the medium size utility company operates on single location and time zone.
    1. From the metalink document we understood that converting to multi org is mandatory for all customers(including hrms) planning to R12.
    2. We would like to know the impact of converting to multi org on HRMS
    3. The document 259546.1 says that there are scripts to create the lightweight operating unit and then running adadmin option would change the environment to multi org enables.
    4. In our environment already hr organizations are defined and running for several years. As per the above statement do we need to run the script to create a new lightweight operating unit and run adadmin?. If so where can i find the script for creating the lightweight OU. We found the patch 5965493. But that patch is failed in our environment when executing funmodefou.sql
    Can anyone please point us to a clear set of documents which explains the impact on HRMS and detail steps to convert to multi org.
    I appreciate your help

    1.select * from HR_ORGANIZATION_INFORMATION where ORG_INFORMATION1 like 'Operating Unit Information'
    2.select * from HR_ORGANIZATION_INFORMATION where ORG_INFORMATION_CONTEXT like 'Operating Unit Information'
    3. Select count(*) from hr_operating_units
    count
    0
    4. SELECT O.BUSINESS_GROUP_ID , O.ORGANIZATION_ID , OTL.NAME , O.DATE_FROM , O.DATE_TO , O3.ORG_INFORMATION2 , O3.ORG_INFORMATION3 FROM HR_ALL_ORGANIZATION_UNITS O, HR_ALL_ORGANIZATION_UNITS_TL OTL, HR_ORGANIZATION_INFORMATION O2, HR_ORGANIZATION_INFORMATION O3 WHERE O.ORGANIZATION_ID = O2.ORGANIZATION_ID AND O.ORGANIZATION_ID = O3.ORGANIZATION_ID AND O2.ORG_INFORMATION_CONTEXT||'' = 'CLASS' AND O3.ORG_INFORMATION_CONTEXT = 'Operating Unit Information' AND O2.ORG_INFORMATION1 = 'OPERATING_UNIT' AND O2.ORG_INFORMATION2 = 'Y' AND O.ORGANIZATION_ID = OTL.ORGANIZATION_ID AND OTL.LANGUAGE = userenv('LANG')
    returns 0 records

  • Setting up Multi server environment in Sql Server 2012 - Enlist Failed Error

    I am trying to Configure the Master target server / Multi server environment in Sql Server 2012.
    I changed :
     - `MSXENCryptChannnelOptions`-->Changed from 2 to 0
     - `AllowDownloadedJobsToMatchProxyName` - changed from 0 to 1 on the target
    When I run the wizard I am getting below error
    >MSX Enlist failed for Job Server 'MasterServerName'
    >The enlist operation Failed(Reason:SQL Server Agent Error: Unable to connect to MSX 'MasterServerName'(Microsoft Sql Server, Error : 22026)
    They both servers SQL Agents are running on the same windows service account.
    Any Suggestions on how to fix this?
    **Adding the Log:**
    Enlist TSX Progress
    - Create MSXOperator (Success)
    Checking for an existing MSXOperator. 
    Updating existing MSXOperator. 
    Successfully updated MSXOperator. 
    - Make sure the Agent service for 'Test3' is running (Success)
    The service 'SQLSERVERAGENT' is running. 
    - Ensure the agent startup account for 'Test4' has rights to login as a target server (Success)
    Checking to see if the startup account for 'Test4' already exists. 
    Login exists on server. 
    Checking to see if login has rights to msdb. 
    Login has rights to msdb. 
    Checking to see if user is a member of the TargetServersRole. 
    User is a member of the TargetServersRole. 
    - Enlist 'Test4' into 'Test3' (Error)
    Enlisting target server 'Test4' with master server 'Test3'. 
    Using new enlistment method. 
    Messages
    MSX enlist failed for JobServer 'Test4'.  (Microsoft.SqlServer.Smo)
    ADDITIONAL INFORMATION:
    An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
    The enlist operation failed (reason: SQLServerAgent Error: Unable to connect to MSX 'TEST3'.) (Microsoft SQL Server, Error: 22026)

    hi SmilingLily,
    you can try to run the SQL Agent under a domain account.

  • Convert to Multi Org

    Hi,
    I got this action plan from metalink.
    ACTION PLAN
    ===========
    1 - Apply patch#4172504 (If you have already applied then go to step 2)
    2 - Responsibility: System Administrator
    Navigation: Profile-System
    Ensure a value has been set for profile MO:Operating Unit.
    3 - Execute Convert to Multi-org from adadmin.
    How do I execute item no. #3 ?
    I run adadmin but there is no convert option here :
    AD Administration Main Menu
    1. Generate Applications Files menu
    2. Maintain Applications Files menu
    3. Compile/Reload Applications Database Entities menu
    4. Maintain Applications Database Entities menu
    5. Change Maintenance Mode
    6. Exit AD Administration
    ==========
    Please help...
    Thanks a lot

    Hi Hussein,
    My SR metalink support has another updates:
    ACTION PLAN
    ===========
    Please navigate to
    System Administrator> profile > system > MO: Operating Unit and set the profile value = 'Y' / 'YES'
    and then re-test the issue.
    ===========
    I just wonder if this is the proper way to convert to a multi-org or he just want to put 'Y' value ?
    But when I check the sample VISION setup the value of MO: Operating Unit is "Vision Operations" and not
    just "YES"

Maybe you are looking for