Updation/Creation of service notification

I want to create a service notification using transaction iw51& iw52. The notification has a few custom fields to be updated I am using BAPI_SERVNOT_CREATE to create the notification but i am not able to update the custome fields the BAPI doesnot have Extension_In/Extension_out fields also. I have tried using BAPI_ALM_NOTIF_DATA_ADD , BAPI_SERVNOT_MODIFY_DATA , BAPI_SERVNOT_ADD_DATA these too have the same issue. I want to know the BAPI which can be used for updating the custom fields 
I am prefering to use BAPI instead of BDC.
Kindly Respond urgently.
Thanks.

Hi Ayushi,
In the Include MV45AFZZ you need to write you code.
First check for whcih service notification. I mean Notification Type.
Then use you BAPI if it is correct for the notification type.
  CALL FUNCTION 'BAPI_ALM_NOTIF_CREATE'
       EXPORTING
            notif_type         = p_header-tables-mnmisc-notif_type
            notifheader        = p_header-tables-mnhead
            task_determination = p_header-tables-task_determination
            orderid            = p_header-tables-mnmisc-orderid
       IMPORTING
            notifheader_export = l_head
       TABLES
            notitem            = l_it_item         " Since you dont have any items to create leave it blank.
            notifcaus          = l_it_caus      " Since you dont have any causes to create leave it blank.
            notifactv          = l_it_act          " Since you dont have any activities to create leave it blank.
            notiftask          = l_it_task         " Since you dont have any tasks to create leave it blank.
            notifpartnr        = l_it_part       "etc ditto
            longtexts          = l_it_text
            return             = l_it_return.
read table it_return index 1 / read table it_return TYPE = 'S'
if sy-subrc = 0.
lv_notNumber = MESSAGE_V1 / MESSAGE_V2 .
  message  'Notification created' with lv_notnumber type 'S'.
endif.
The above logic is a Psuedo or a hint only. Hope this helps.
Thanks & regards,
Bhargav.
Finally in the user exit give the message

Similar Messages

  • BAPI to update ALNZN while creation of  Service Notification

    Hi Folks,
    I want to update ALNZN ( condition after malfunction in system condition tab of IW22/IW52) using BAPI/FM while NOTIFICATION CREATION.
    I tried with most bapi's mentioned below but all of these dont have field for system condition tab.
    BAPI_SERVICENOTIFICAT_CREATE.
    ALM_PM_NOTIFICATION_CREATE
    BAPI_ALM_NOTIF_CREATE
    BAPI_ISUSM_NOTIF_CREATEMULTIPLE
    BAPI_QNOTIFCAT_CREATE
    BAPI_SERVNOT_CREATE
    BAPI_QUALNOT_CREATE
    IWON_NOTIFICATION_CREATE
    Please suggest standard method to create service notif along with QMEL-ALNZN 
    And also we need to update existing notif with same field, please suggest for NOTIFICATION UPDATE functionality as well
    Thanks,
    Mozila

    Not possible with BAPI.
    Use BDC or direct update on QMIH table

  • Creation of Service Notification  No for SO.

    Hi everyone,
    I am working on the User Exit for the first time. Kindly help me out with the following requirement.
    When a sales order is saved, create a service notification and link to the sales order header.
    To fulfill this requirement we need to use the following:
    Program SAPMV45A, Include MV45AFZZ, USEREXIT_SAVE_DOCUMENT
    BAPI to create service Notification is : BAPI_ALM_NOTIF_CREATE
    When the service notification is created, the following fields should be populated in the notification as the end result:
    1.     Sales Organization (VIQMEL-VKORG)
    2.     Distribution Channel (VIQMEL-VTWEG)
    3.     Division (VIQMEL-SPART)
    4.     Sales office (VIQMEL-VKBUR)
    5.     Sales Group (VIQMEL-VKGRP)
    6.     Notification short text should contain the sales order number (VIQMEL-QMTXT)
    7.     Sales Order (VIQMEL-VBELN)
    The following fields should be updated in the sales order as the end result:
    1.  Notification number (VBAK-QMNUM)
    I need to check if notification no. needs to be created or not. Also, the notification type should be valid. If not I need to throw a warning mess. but SO no. should be saved. if the condition is satisfied then BAPI should be called and notification no. should be created.
    In case if BAPI fails then handling should be done with the help of the transaction SLG1.
    Please provide me technical help.
    Regards,
    Ayushi

    Hi Ayushi,
    In the Include MV45AFZZ you need to write you code.
    First check for whcih service notification. I mean Notification Type.
    Then use you BAPI if it is correct for the notification type.
      CALL FUNCTION 'BAPI_ALM_NOTIF_CREATE'
           EXPORTING
                notif_type         = p_header-tables-mnmisc-notif_type
                notifheader        = p_header-tables-mnhead
                task_determination = p_header-tables-task_determination
                orderid            = p_header-tables-mnmisc-orderid
           IMPORTING
                notifheader_export = l_head
           TABLES
                notitem            = l_it_item         " Since you dont have any items to create leave it blank.
                notifcaus          = l_it_caus      " Since you dont have any causes to create leave it blank.
                notifactv          = l_it_act          " Since you dont have any activities to create leave it blank.
                notiftask          = l_it_task         " Since you dont have any tasks to create leave it blank.
                notifpartnr        = l_it_part       "etc ditto
                longtexts          = l_it_text
                return             = l_it_return.
    read table it_return index 1 / read table it_return TYPE = 'S'
    if sy-subrc = 0.
    lv_notNumber = MESSAGE_V1 / MESSAGE_V2 .
      message  'Notification created' with lv_notnumber type 'S'.
    endif.
    The above logic is a Psuedo or a hint only. Hope this helps.
    Thanks & regards,
    Bhargav.
    Finally in the user exit give the message

  • Creation of Service Notification and filling certain fields

    Hi,
    I am trying to create a service notification document from inside dunning activity (TR FBVB).
    The steps that I followed are
    A custom FM is configured which is called after dunning event ISU_DUNNING_BLOCK_DEVICE_0350. This std FM creates a disconnection order number which can be seen via TR EC87. This EC87 transaction has a tab for service orders created via it.
    The custom FM configured is called after standard FM is used to get disconnection order and then we are using FM ISU_S_DISCDOC_CHANGE. This FM creates the relevant service notification document for the disconnection order.
    The problem we face in here is the equipment number, connection number, installation, material, serial number created via the FM ISU_S_DISCDOC_CHANGE is blank.
    Our requirement is to have the service notification created via the above fields populated in it.
    Kindly suggest is there any alternative to get those fields populated in the service notification (TR IW53)
    Regards,
    Imran

    hi eshwar
    you can create service order by using the service notification,
    create service notification using IW54 after entering the details select the Service notification in the menu and select the service order create OR press the Order buttom ,and enter the order type you  want to create
    hope this will clear you
    regards
    thyagarajan

  • How to block a material that not to creation of service notification thru-IW51

    Hi All,
    I have tried in all over areas ( MM02 level and MM06 level ) to block a material that not to create service notification with that material but didn't get a solution.If any one knows solution for this kindly provide me.
    "How to block a material that not to create a service notifcation thru IW51?"
    Best Regards,
    Narendra Konnipati

    Narendra,
    1. I do not see any possibility without using this exit. It is a very simple and effective thing for your ABAPer and you too.
    2. In case of many Materials-Notification type combinations, you can maintain similar code by joining several elseif s.
    3. Alternatively, you can maintain a Z Table as under:
    QMART
    MATNR
    S3
    10000000099999
    S3
    10000000099988
    S1
    10000000088988
    S2
    12000000088988
    Means, for every Notification type there will be one or more prohibited materials. The coding will not be difficult, but will have around 15/20 lines.Finally, if you have to get your issue resolved, I feel this is the way and also easy way through your ABAPer.
    Tell me in case of any further opinions.
    Best of Luck
    KJogeswaraRao

  • Function module for creation of service notification in R/3

    hi,
    Can anyone plz tell me is there any function module available in CRM that will create service notification in R/3??

    Hi Anirban,
    Use the bapi BAPI_BUSPROCESSND_CREATEMULTI to achieve the same.
    <b>Reward points if it helps.</b>
    Regards,
    Amit Mishra

  • Auto creation of service notification with service order

    Hi  all
    Please let me know how can this achived.
    1.    When Service order is created automatically notification should create.
    how can we do this, Please let me what is cutomization step for this.
    2. Is it possible to generate the service order and notification automatically when sales order is created.If so how it can be achived.
    regards
    Krish

    As stated above, its done through the Transfer of Requirements settings in the SD IMG
    As an example lets look at the standard repair order - the links are:
    Sales document item category IRRP
    - Item Cat IRRP is linked to Requirements Type SERP (SD IMG->Determination Of Requirement Types Using Transaction)
    -- Requirements Type SERP is linked to Requirements Class 204 (SD IMG->Define Requirements Types)
    --- Requirements Class 204 is lined to order type SM03 (SD IMG->Define Requirements Classes)
    PeteA

  • Automatic creation of service notification for maintenance order

    hi,
    I created one new document type (SR) as service requestion in material management.
    Then i create maintenance order for service and attached service master. System generated PR. Where document type to be given to get SR instead of PR.
    Kindly explain
    Regards
    sathish. R

    Hi,
    Please check the indicatorsin Actual cost/cost sales  and Valid recevivers in settlement profile.
    If for cost center : 1 settlement optional is maintained in valid recevivers and also for order
    and in actual cost/ cost sales: indicator to be settled in full is selected.
    Also check Allocation structure too if you have assigned the valid allocation structure.
    **check if you have assigned the valid settlement profile to order types.
    *****Most important after doing all these settings you need to create new order. for same order you will not get the automatic settlement rule
    Hope this helps.
    Regards,
    PMAddi

  • Planner group is not updated in service notification using BAPI

    Hi,
    Planner group is not updated in service notification using BAPI BAPI_ALM_ORDER_MAINTAIN.
    I have written the below code, but planner group is not updated in the service notification.
    Please advice which parameters do i need to pass to update planner group in the service notification.
              wa_methods-refnumber      = '000001'.
              wa_methods-objecttype     = 'PARTNER'.
              wa_methods-method         = 'CREATE'.
              wa_methods-objectkey      = wa_subscr1-aufnr.
              APPEND wa_methods TO i_methods.
              wa_methods-refnumber      = '000002'.
              wa_methods-objecttype     = 'HEADER'.
              wa_methods-method         = 'CREATE'.
              wa_methods-objectkey      = wa_subscr1-aufnr.
              APPEND wa_methods TO i_methods.
              wa_methods-refnumber      = '000000'.
              wa_methods-objecttype     = ' '.
              wa_methods-method         = 'SAVE'.
              APPEND wa_methods TO i_methods.
              REFRESH i_partner.
              CLEAR wa_partner.
              wa_partner-orderid        = wa_subscr1-aufnr.
              wa_partner-partn_role     = 'VW'.
              wa_partner-partn_role_old = ''.
              wa_partner-partner        = wa_subscr1-parnr.
              wa_partner-partner_old    = ''.
              APPEND wa_partner TO i_partner.
              REFRESH i_planrgrp.
              CLEAR wa_planrgrp.
              wa_planrgrp-orderid        = wa_subscr1-aufnr.
              wa_planrgrp-plangroup      = wa_subscr1-ingpr.
              APPEND wa_planrgrp TO i_planrgrp.
              REFRESH i_planrgrp_up.
              CLEAR wa_planrgrp_up.
              wa_planrgrp_up-orderid     = wa_subscr1-aufnr.
              wa_planrgrp_up-plangroup   = 'X'.
              APPEND wa_planrgrp_up TO i_planrgrp_up.
    *----Change order details with Technician name
              CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
                TABLES
                  it_methods   = i_methods
                  it_header    = i_planrgrp
                it_header_up = i_planrgrp_up
                  it_partner   = i_partner
                  return       = i_return.
    Thanks & regards,
    Krishna

    Try this way
    CALL FUNCTION 'BAPI_SERVNOT_CREATE'
    EXPORTING
    * EXTERNAL_NUMBER =
    notif_type = 'S3'
    notifheader = ls_notif_h
    * TASK_DETERMINATION = ' '
    * SENDER =
    * ORDERID =
    IMPORTING
    NOTIFHEADER_EXPORT = ls_notif_e
    TABLES
    * NOTITEM =
    * NOTIFCAUS =
    * NOTIFACTV =
    * NOTIFTASK =
    * NOTIFPARTNR =
    * LONGTEXTS =
    * KEY_RELATIONSHIPS =
    return = lt_return
    * IF lt_return IS INITIAL.                                               " <<< Comment this lie
    read table  lt_return into ls_return with key type = 'E'. " << Change
    if sy-subrc ne 0.                                                             " << Change
    COMMIT WORK AND WAIT.
    write: / ls_notif_e-NOTIF_NO.
    ELSE.
    LOOP AT lt_return INTO ls_return.
    WRITE:/ 'errors'.
    * ls_return.
    ENDLOOP.
    endif.
    a®

  • BAPI for Service Notification Creation (with address)

    Hi Friends,
    Could any one help and let me know if there is a BAPI which helps to create a Service Notification and has the capability to update the address fields in that Service Notification. I am aware of the BAPI  "BAPI_SERVNOT_CREATE"  but it does not have the capability to update the address fields (like name1, name2, street, city, region, email address etc). Thanks in advance.
    Regards
    Sid

    Ravi ,
    Thanks for your passing me the bapi , when i use it the program goes to dump , its regarding the category , what has to be passed to the category ,
    As of now i m passing Notification type , Requestor , Code grp and activity code.
    Sorry for not Rewarding points in time , i was at lunch ,

  • Update default tile when Notification Service is WNS

    Hi,
    I have Windows Phone 8.1 Silverlight project.
    When I using WNS (Notification Service) I cant update default tile.
    When Notification Service is MPN I use:
    var findTile = ShellTile.ActiveTiles.FirstOrDefault();
    if (findTile != null)
    findTile.Update(new FlipTileData
    BackgroundImage = new Uri("isostore:/Shared/ShellContent/image123456789.jpg", UriKind.Absolute)
    and everything works great.
    How can I update default tile when Notification Service is WNS?

    I already know how :)
    private async Task UpdateWideTile()
    var tile = CreateWideTile();
    Windows.Storage.StorageFile file = await Windows.Storage.ApplicationData.Current.LocalFolder.CreateFileAsync("myImage.jpg", Windows.Storage.CreationCollisionOption.ReplaceExisting);
    using (var storageStream = await file.OpenStreamForWriteAsync())
    tile.SaveJpeg(storageStream, 310, 150, 0, 100);
    XmlDocument tileXml = TileUpdateManager.GetTemplateContent(TileTemplateType.TileWide310x150Image);
    XmlNodeList tileImageAttributes = tileXml.GetElementsByTagName("image");
    ((XmlElement)tileImageAttributes[0]).SetAttribute("src", file.Path);
    var tileNotification = new Windows.UI.Notifications.TileNotification(tileXml);
    TileUpdateManager.CreateTileUpdaterForApplication().Clear();
    TileUpdateManager.CreateTileUpdaterForApplication().Update(tileNotification);
    Hi undertaker,
    I'm glad that you have solved it, thank you for sharing your solution here:)
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Creation of items in Service Notification

    Hi,
    I am trying to create a service notification document from inside dunning activity (TR FBVB).
    The steps that I followed are
    A custom FM is configured which is called after dunning event <u>ISU_DUNNING_BLOCK_DEVICE_0350</u>. This std FM creates a disconnection order number which can be seen via TR EC87. This EC87 transaction has a tab for service orders created via it.
    The custom FM configured is called after standard FM is used to get disconnection order and then we are using FM ISU_S_DISCDOC_CHANGE to create a service notification from the disconnection order. This FM creates the relevant service notification document for the disconnection order.
    The problem I am facing in here is the equipment number, connection number, installation, material, serial number created via the FM ISU_S_DISCDOC_CHANGE is blank.
    Our requirement is to have the service notification created with the above fields populated in it.
    Kindly suggest is there any alternative to get those fields populated in the service notification (TR IW53 to view service notification)
    Regards,
    Imran

    Hi Imran:
    Could you please Function Module  ISU_S_DISCDOC_CREATE instead  of
    ISU_S_DISCDOC_CHANGE ?
    Hopefully your problem would be resolved.
    Regards
    Shashi

  • Why is creation of a service notification using BAPI not working?

    I need to create a service notification.
    I have found 2 BAPIs.
    BAPI_SERVICENOTIFICAT_CREATE
    BAPI_SERVNOT_CREATE
    The code below using the second BAPI is not creating a notification and the return parm does not have any errors.
    You can see it does a call to commit after the BAPI call
    Perhaps I am missing something critical in the parms.
    We are trying to creat a service type notification using equipment.
    DATA ls_notif_h TYPE bapi2080_nothdri.
    data ls_notif_e type BAPI2080_NOTHDRE.
    DATA lt_return  TYPE STANDARD TABLE OF bapiret2.
    DATA ls_return  LIKE LINE OF lt_return.
    ls_notif_h-equipment = '10000044'.
    CALL FUNCTION 'BAPI_SERVNOT_CREATE'
      EXPORTING
      EXTERNAL_NUMBER          =
        notif_type               = 'S3'
        notifheader              = ls_notif_h
      TASK_DETERMINATION       = ' '
      SENDER                   =
      ORDERID                  =
    IMPORTING
        NOTIFHEADER_EXPORT       = ls_notif_e
    TABLES
      NOTITEM                  =
      NOTIFCAUS                =
      NOTIFACTV                =
      NOTIFTASK                =
      NOTIFPARTNR              =
      LONGTEXTS                =
      KEY_RELATIONSHIPS        =
        return                   = lt_return
    IF lt_return IS INITIAL.
      COMMIT WORK AND WAIT.
      write: / ls_notif_e-NOTIF_NO.
    ELSE.
      LOOP AT lt_return INTO   ls_return.
        WRITE:/ 'errors'.
       ls_return.
      ENDLOOP.
    Thanks.
    Scott

    Try this way
    CALL FUNCTION 'BAPI_SERVNOT_CREATE'
    EXPORTING
    * EXTERNAL_NUMBER =
    notif_type = 'S3'
    notifheader = ls_notif_h
    * TASK_DETERMINATION = ' '
    * SENDER =
    * ORDERID =
    IMPORTING
    NOTIFHEADER_EXPORT = ls_notif_e
    TABLES
    * NOTITEM =
    * NOTIFCAUS =
    * NOTIFACTV =
    * NOTIFTASK =
    * NOTIFPARTNR =
    * LONGTEXTS =
    * KEY_RELATIONSHIPS =
    return = lt_return
    * IF lt_return IS INITIAL.                                               " <<< Comment this lie
    read table  lt_return into ls_return with key type = 'E'. " << Change
    if sy-subrc ne 0.                                                             " << Change
    COMMIT WORK AND WAIT.
    write: / ls_notif_e-NOTIF_NO.
    ELSE.
    LOOP AT lt_return INTO ls_return.
    WRITE:/ 'errors'.
    * ls_return.
    ENDLOOP.
    endif.
    a®

  • Creation of Repair Order (SD with reference to a Service Notification

    Hi,
    I hv a requirment to create a Repair Order(Sales Order) with reference to a Service Notification when a Purchase Order arrives via EDI / interfaces using CIP2SAP ( EXITS OR BADI ).
    Pls suggest, if there are  any user exit(s) to meet this requirement.
    Thanks in advance
    Regards
    Anand

    if you want to have you can use the FM ALM_ME_GOODSMVT_CREATE
    hope it helps

  • Creation of service order and service notification

    Hi guys,
    Please any one help me how to create service order through service notification, and explain me the process.This is very urgent for me kindly help the same.
    Reg
    Eswar
    [email protected]

    hi eshwar
    you can create service order by using the service notification,
    create service notification using IW54 after entering the details select the Service notification in the menu and select the service order create OR press the Order buttom ,and enter the order type you  want to create
    hope this will clear you
    regards
    thyagarajan

Maybe you are looking for