Updation of Factory Calendar

Hi,
I have a situation here regarding Factory Calendar.
So far we are maintaining the Factory Calendar through Opening the System, but now we want to Synchronize it and route it through proper Transport System.
Can I get suggestions, for how can I sync the PRD, TEST and DEV Systems maintaining the current config in PRD system
Whether we get the PRD Factory Calendar Dump and then compare and create in DEV, or is there another system / process / way by which we can sync all three Systems ?
Total calendars would be around 30 Factory Calendars.
Please provide expert comments / suggestions.
Thanks in advance,
Harris

Dear,
General: You can only transport the factory/public holiday calendar as a whole.
System landscape: The factory/public holiday calendar should be maintained and changed in a separate Customizing client/system. It can then be transported to productive or test systems. Direct changes in the production systems are not recommended.
Prerequisites for the transport:
    Your user has the authorization object S_CALENDAR
    The role of the client from which you want to perform the transport is set to Customizing
    Cross-client Customizing is allowed
    The transport link is active (automatic recording of changes)
The settings of the client can be checked as follows: Tools -> Customizing -> Basic functions -> Set up clients -> Set up client
Header Data
You can check the 3 last points in the client settings. To do this, call transaction SCC4. Double-click on the client where they are located. Check the settings.
Please transport your all Calender again to Prod system.
Regards,
R.Brahmankar

Similar Messages

Factory calendar table update

Hello gurus,
An urgent requirement!!!
I have three Source system configured in BW.
The FActory cal id for the two systems were not found in BW.
When i use rebuild table for the factory calendar id using transfer global setting option in the source system it updates the table but over writes it when i use the same option for other source system.
Suggestion please
Thanks in advance
Ram

Hi,
the program doesn't admit the update on factory calendar!!
You need an alternative way.
I suggest two possibility:
Transaction SCU0 to compare all the tables by RFC in remote system, (you can automate this comparison in a program) But the comparing will be for all tables:
TCALS
TFACD
TFACS
TFACT
TFAIN
TFAIT
THOC
THOCD
THOCI
THOCS
THOCT
THOL
THOLT
THOLU
or for the IMG activity related to calendar.
Other way is to use the BC set functionality. When you make modification in a calendar in source system you insert all modifications in a request, then you can get this request in a BC set. After you can download it and upload in BW.
Regards,
Sergio

Maintain Factory Calendar

Hi
We are getting an error when running a query that contains a variable using Factory Calendar, "date is outside the factory calendar range"
I check SCAL and noticed that my calendar is set to date 1996 to 2010. When comparing to R/3 our BW calendar is outdated.
How do I maintain this calendar using R/3? How do I load this information? I'd rather not to change directly in BW.
Thanks

Go to R/3 source system right click and do transfer global settings ,it should update the factory calendar .
Ravi

How to update Factory Calendar in SRM

Do we need to have Factory Calendar updated in SRM as currently it shows valid to 2010?
My understanding is that this is only for ECC. What is Factory Calendar used for in SRM? How do I update/ extend it?

Hi Jagdish, How are you? I'm sorry to trouble you,
Let me introduce, I'm Daniel, and I saw your fantastic asnwer in
the topic "How to update Factory Calendar in SRM", and might I have the same
problem. It's with the "factory calendar".
In transaction va02 when I choose a Delivery Date, and I sent it to process, as
a result in the "shipping tab" it calculated to the first item one date, and to
the rest one date different. I don't know What it happen?
I debugged the program and I saw that to the first item use to calculate the
date is the function 'APO_SCHEDULING', and to the rest item use
'SD_SCHEDULING', and until here I come.
How can I do to what the dates calculated are the same? or What would be the problem?
I need the dates calculated are equal.
I looked at it's using two "factory calendar" which are "J4" and "C2". Is this
correct?
Thanks In Advance,
My best regards,

Factory Calendar update

Hell All
For plant my client is requesting that 26 December 2014 be marked as a non working day. The plant is
all taking this day as one of their floating holidays and need it considered as
non work day in factory calendar to extend their Christmas break.
Is there any impact if we do this for other module etc.,,what would be best way if we do through open client or landscape.
Can anyone tell me how to do the same.
Regards
Ananthi

Hello Remi,
While I try to create a workbench request it shows the target system deletes the Holiday calendar.Factory Calendar etc.,after moving the TR it deletes the initial and overwrites ?
when I try to check for transport conflict analysis it takes production logon which never happens before.
Also here I have made the changes for Factory calendar alone in special rule,whereas no changes to holiday calendar,for this case is it require to run the work schedule rule.
Regards

Error while processing sales order as factory calendar missing.

"factory calendar missing or error in factory calendar".iam getting this error while processing sales order even though i have assigned it to shipping point and plant and sales org.

Hi Malik, How are you? I'm sorry to trouble you,
Let me introduce, I'm Daniel, and I saw your fantastic asnwer in
the topic "How to update Factory Calendar in SRM", and might I have the same
problem. It's with the "factory calendar".
In transaction va02 when I choose a Delivery Date, and I sent it to process, as
a result in the "shipping tab" it calculated to the first item one date, and to
the rest one date different. I don't know What it happen?
I debugged the program and I saw that to the first item use to calculate the
date is the function 'APO_SCHEDULING', and to the rest item use
'SD_SCHEDULING', and until here I come.
How can I do to what the dates calculated are the same? or What would be the
problem?
I need the dates calculated are equal.
I looked at it's using two "factory calendar" which are "J4" and "C2". Is this
correct?
Thanks In Advance,
My best regards,

How to maintain TFACS table (Factory calendar) into SAP BI

Hi,
I deal with a daily stock infocube and I would like to set a flag when the warehouse doesn't work (on holiday).
to do this, I would like to use the factory calendar (TFACS), and I have 2 questions:
1) How to maintain the TFACS table into SAP BI ?
2) How to use the TFACS data into SAP BI ? In other words, How to convert the TFACS data values in date ?
Thx.
Radj.

1.
rsa1(source-systems) --> right-click on the source system you load from --> transfer global settings --> flag 'factory calendar' and 'rebuild' or 'update tables'
2.
use function module DATE_CONVERT_TO_FACTORYDATE.
it returns workingday_indicator (initial if it's a worling day) that you can use as a flag, or it also returns the next working day.
you can use this function module in the transformation in the field routine of the flag...i think this is the best option.
M.

Using factory calendars in BI transformations

Hello All,
Do we have the option of using factory calendars in BI transformations, like we had in 3.x version update rules.
I did not see any option for choosing the factory calendar, so i guess we will have to use function modules.
Please let me know if there is any option available.
Thanks in advance.
Manoj

hi Anton Moskvichev,
I check in the source system assignment. The source system is checked. While replicating the DS from source system i replicated based on BI 7.0 only. While activating the cube or infoobject from BI content i did not get any transformation or transfer rules for activation. I just got the cube alone..

Changes to Factory Calendar Not reflected in work schedule

I have updated the exsisting factory calendar in PRD .
Yet the changes do not seem to have taken effect. I have tried to regernerate the work schedule. However I'am not sure I have done that properly.
Any assistance would be greatly appreciated.
Thank you

Hi.. you cant expect any change in the Factory calender affecting work schedules. If you want the work schedules to be updated with the holidays you need to be updating the holiday calender.
Factory calender is mainly for Plant Schedules, Bank transfers in finance , etc

Error Msg_ME078 - DELIV. date outside period covered by factory calendar

Dear experts:
when i create PO with ME21N,
if the delivery date is not within the year of 2010,
there will appear an error msg "ME078 - DELIV. date outside period covered by factory calendar".
i have checked the factory calendar with SCAL.
i know how to modify the factory calendar to expand the time period,
but now i still have a question,
the system can't change the year period automatically?
so we have to change the period after we confirm the public holiday calendar?
thanks ~
B/Rs
Jamie

hello~
if the system can't update the calendar automatically..
why the consultant didn't set the valid period to an exaggeration year at that time?
did they have any concern?
thanks a lot~
B/Rs,
Jamie

How to extend factory calendar

Hi,
We need to do extend our factory calendar before we
update the time stream. Our factory calendar
only up to year 2010.
Kindly please advise how to extend the factory calendar?
Thank you.

Hi Harish,
I try to change the "To Year" from 2010 to 2020, but there is an error message coming out and does not allowed me to change: "Please enter validity area between years 1998 - 2010".
Kindly please advise. Thank you.

Difference between calendar used in capacity profile & factory calendar?

Hello experts
I am trying to check available capacities in planning book & found some ambiguities.
In /SAPAPO/RES01, factory calendar maintained in the resource is say Z1, but in the same page, the capacity profile tab uses a different calendar.Say in Z1, if X/X/XXXX is a working day, the one present inside capacity profile considers it as a holiday & the available capacity doesn't reflect in planning book.
In ECC, the plant where this work center is defined follows calendar Z1.
So my doubt is which calendar the capacity profile follows & how to ensure that it follows the same factory calendar Z1?
Regards
Soum

Hello Soumyajit,
few things you can check,
Plant and work center calender assignment should be same, Plant has precedent over WC
Check if in CFC9 you have correct change transfer mode set for resource.
Once calender updated in ECC, use program RSIMPCUST to rebuild the tables for factory calendars in APO and then run /SAPAPO/CRES_CREATE_LC_RES to extend the resource in LC
also run /SAPAPO/TIMESTREAM_UPDATE for any time stream update.
This will update capacity profile as well resource capacity in planning book/ planning board.
Hope this info will help you,
Thanks,
Rajiv

How get the duration in days of 2 key figures with use of factory calendar

Hi all,
in a query i have two key figures (dates!). Now i want to get the duration in days between the two dates with the use of one factory calendar.
FYI
I made this in the past in the update rule (...DURATION_DETERMINE..) but now in this situation i have two cubes and i want to make an report on a multicub.
Thank you very much for any help.
Frank

You would probably accomplish this with a virtual key figure. I did this and the performance was not bad. I developed a class with a signature for 2 dates and a calendar to return the number of business days.
Hope that helps...

Information Broadcasting according to the SAP factory calendar

Is it possible to circulate BW reports via the Information Broadcaster according to the SAP factory calendar?
It is our objective to circulate reports according to working days (not calendar dates). Eg, to circulate cost centre reports on the 4th working day.
Regards,
Frederick
PS - we use BI7

As suggested above, you may need to create a new calender in SCAL. Points to be kept in mind during the creation of calender are;
1. Use special rules to create fourth working day every month
2. Keep in mind regarding the holidays.
3. You may need to validate this calender in future as you do not know the future holidays.
Option 1: Via Process chain
Create a separate/new process chain which updates the Infocube/ODS on which the report exists -> At the end of process chain, create a new process "Trigger event data change(for broadcaster) -> In the scheduling options of the process chain, use the newly created calender and schedule the chain -> In the Bex broadcaster wizard, select option "Execution with Data Change of Infoprovider".
For more help, refer the below;
http://www.tli-usa.com/download/Taking_Charge_of_Information_Broadcasting_in_BI_7[1].0_for_improved_report_and_data_distribution.pdf
Option 2: Via background Job
Create a new Job in SM36. In the scheduling options of the Job, use the newly created calender in restrictions. Create a new step for ABAP program RSRD_BROADCAST_FOR_TIMEPOINT and schedule the Job.
If user has authorizations then, Time Point defined by the Job will be visible in the Bex broadcaster wizard.
Refer the above link for more information.
Hope this helps,
Regards,
Sunil
Edited by: sunil kumar on Jan 20, 2012 9:56 PM

Factory Calendar In Maintaince Orders

Hi all
I am Geeting the Maintainece Order Dates From R3
And i n BW using Factory Calender i have to caluclate the Planned dates and Hours
We have to set the Factory Calender In BW r3 Guys doesn't maintain in it.
Can some body help me in this
Regards
Vasu

Vasu,
The calendar has to come from the source system , it is best that way.
If the factory calendar does not come from the source , how will you tally the information coming in from the source system.
My bit would be to first import all the calendars from the source ( RIght click on the source system connection in RSA 1 --> Transfer Global Settings --> Select Calendars --> Update the tables ( or replace the data ) and then execute )
In all likelihoood , you might be having calendars in the source...
Arun
Assign points if helpful
Or else you could try
SBIW --> SAP Netweaver --> General Settings --> Maintainj Calendar
Message was edited by: Arun Varadarajan
Message was edited by: Arun Varadarajan

Updation of Factory Calendar

Similar Messages

Maybe you are looking for