Upgrade from 10.1.2 to Tiger (can it be done)

I have a relative who is still using 10.1.2. He is using a flat panel G4 with 512k ram and 40GB HD. he would like to upgrade but he still has some old system 9 apps that he uses and does not want to lose them plus he still wants his iMac to work. Can this even be done.

James:
Tom has given you information on the System Requirements for Tiger.
Your relatives flat panel will run the latest version of OS X, (read Tiger). This computer has Open Firmware, and does not need a Firmware update. Although 512 MB of RAM meets the minimum requirement I suggest upgrading to 1 GB of RAM.
Expanding on what Tom said, Tiger can be purchased from the Apple Store or, on CDs, from applerescue. See this article for options on Installing Tiger without a DVD drive.
Please do not hesitate to post back with further questions or comments.
Good luck.
cornelius

Similar Messages

Need to upgrade from 10.4.11 to Tiger..

Can I upgrade from 10.4.11 to Tiger through app store, or do I need install disk? Really don't want to move all my files, so I am hoping I can upgrade with just a few clicks...

Hi Ira,
10.4 is Tiger, & 10.4.11 is as high as Tiger goes.
10.5.x is Leopard
10.6.x is Snow Leopard
10.7 is Lion
The highest OS your Core Duo can run is 10.6.x, you cannot install or run 10.7 on it...
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.

Upgrading from a G5 iMac running Tiger to a new iMac.

I am upgrading from a G5 iMac running Tiger to a new iMac, can I use 32Gb SD Card to move iphotos, itunes, ivideos? If so, how do I do it and insure I keep slideshows, playlists etc. I have built in iphoto, itunes etc.

Your Tiger iPhoto library may need upgrading with a Apple Library updater tool before you can use it with iPhoto '11. Reference. More iPhoto help just in case.
Make sure that that SD card is an SDHC card, and not just an SD card, or it may not be readable in your new iMac.
Here is the layout of the iTunes 11.0.1 Music folder on OS X 10.8.2. It may vary from what you have on Tiger.
Read the following articles before you move your iTunes library from Tiger.
iTunes for Mac: Moving your iTunes Media folder.
iTunes: What are the iTunes library files?
When you are satisfied that your iTunes content is moved over to Mountain Lion, you may wish to deauthorize the G5 from iTunes.

I recently upgraded from leopard to lion, now I can't open iPhoto get the message 'you can't open the application iPhoto because PowerPC applications are no longer supported'. I had no idea that this would happen - what can I do?

I recently upgraded from leopard to lion, now I can't open iPhoto get the message 'you can't open the application iPhoto because PowerPC applications are no longer supported'. I had no idea that this would happen - what can I do?

What version of iPhoto do you have?
Regards
TD

I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do?

I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do? Can I find the original serial number in my old Imac?

You'll have to contact Apple. See Pro Application Replacement Serial Numbers

I want to import songs frm my Ipod to my itunes library. Songs were ripped from CDs to the ipod not purchased from itunes store...how can this be done?

I want to import songs frm my Ipod to my itunes library. Songs were ripped from CDs to the ipod not purchased from itunes store...how can this be done?

You would have to let itunes rip the songs from the cd's, or you would have to copy the music from the computer which ripped cd's.
iTunes does not support transferring music from the ipod unless it was purchased from the store.

Error message when trying to upgrade from 10.3.9 to Tiger 10.4.5

Hope somebody can help. I'm fairly recent to macs as have always built and used pcs. Am having trouble upgrading from current pantherOS to Tiger. Bought emac with upgrade disc provided by seller. Disc was gray labelled emac. Installation went fine and everything was proceeding to point it finished writing files, configuring installation, and running installer scripts and then it quit with message: error installing software. Try reinstalling.
Tried reinstallation and same thing occurred. then Tried complete erase and new installation. Same error message.
Came to discussion group searching for something I might be doing wrong. Decided maybe disc was wrong even though it specified emac which is what I am using. Bought generic install disc that would install on any G3/4/5 with minimum specs per hardware which system met.Installation proceeded as it was going to install same as emac disc. This is normal full install disc for generic installation.
All installations screens came up and installation proceeded to same point as before and then quit with same message: error installing software/ Try reinstalling.
Have removed ram to original 256MB and tried. No luck. I am using external DVD for installation of DVD and wonder if this is problem but in the forums external DVD seems to work alright. Can reinstall old Panther OS without any problem
Ran hardware test and everything checked okay.
Should I just forget about upgrading and use 10.3.9 but would really like to know what is wrong. thanks. Rick

Welcome to Apple Discussions!
See my FAQ:
http://www.macmaps.com/upgradefaq.html
and then consider the instructions here to Archive and Install:
http://docs.info.apple.com/article.html?artnum=301270

Upgrade From 10.1.2 to Tiger

I have a friend who was using her flat panel iMac mainly in OS9. She wanted to upgrade to Tiger and has been sold the OS but is now worrying that she will have to wipe her entire hard drive to install it. She doesn't want to do this. Will the discs perform an upgrade?

Hi Danktuft ,
First make sure you buy the retail full install version of Tiger (black DVD). You cannot use hardware specific disks that shipped with another computer (gray).
You cannot directly upgrade from 10.1.x to 10.4.x. You will have to either reformat the drive (recommended) or do an Erase&Install. In both cases all your data will be lost, so make sure you have a complete backup!!!
If your computer can boot into OS 9 natively:
I suggest to reformat the drive using the OS 9 install CDs. By reformatting the drive with the OS 9 disk you are safe that all required OS 9 hardware drivers will be installed properly.
0. BACKUP YOUR ENTIRE HARD DISK - it will be completely erased during the following procedure!
1. Boot up from the OS 9 install CD and reformat the drive as Apple Extended (HFS+).
2. Install OS 9 and update it to 9.2.2: Mac OS 9: Available Updates
3. Confirm you can boot into OS 9
4. Upgrade your firmware: Firmware Upgrades
5. Insert the Tiger install DVD and reboot while holding down th c-key.
6. Once the installer has started select "disk utility" from the menu.
7. Select "repair OS 9 privilegies" from the menu.
8. Repair the disk.
9. Quit disk utility and proceed with a normal install (do not select Erase&Install because this would erase your OS 9)
10. After the reboot Repair permissions!
11. Download and apply the Mac OS X Update 10.4.8 Combo PPC.
12. Repair permissions again and finally run Software Update from the Apple menu to install all remaining updates (yes, you should install all at once because only the software update app knows the exact order in which they have to be installed).
Good luck!
If this answered your question please consider granting some stars: Why reward points?

Upgrade from 10.1.5 before Tiger?

I have an eMac and don't know much about computers. I was told to get the MSOS X 10.4. Do I need to upgrade something before attempting to install? I can't event get the install information to come up on the desktop.
Thanks,
scottingham
eMac Mac OS X (10.1.x)

Hi, scottingham. Welcome to the Discussions.
I agree with Templeton that more details on how you are going about trying to install Tiger would help us help you.
Meanwhile, here are some things to consider:
1. Does your eMac have a DVD-capable optical drive? Tiger ships on a DVD. If you do not have a DVD-capable optical drive, you can exchange the Tiger DVD for CDs. See the info concerning the "Media Exchange Program" in the box in the right border of this page.
2. Assuming your eMac has a DVD-capable drive, have you tried starting up your eMac using the Tiger DVD?
3. I believe you must have Mac OS X 10.2 Jaguar or later installed in order to install Tiger by the Upgrade Install method. Let me explain:
• The article "Mac OS X 10.4: About installation options" states "... "Upgrade to Mac OS X" appears (unless the installed version can't be upgraded, as described in this article)."• The reference to "this article" in the quote above is to the article "Mac OS X 10.2: Upgrade installation requires Mac OS X 10.1 or later," which states one cannot upgrade from 10.0.x to 10.2. I think this reference is incorrect w.r.t. TIger.
• I believe that reference is incorrect for the following reason: in the manual "Mac OS X v10.4 Tiger Installation and Setup Guide" that should be included in your Tiger retail package, it states on page 3:"If you already have Mac OS X v10.2 or later installed on your computer: All you need to do is Upgrade Tiger..."This implies to me one must be running 10.2 or later, not 10.1.5 as you are now, to use the Upgrade Install. You could use the Archive and Install option discussed on page 7, again presuming your eMac has a DVD capable drive and that some other problem is not prohibiting the disc from mounting.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

I put my mac pro to share with my mac desktop. Iphoto was upgraded from 8.2.1 and I can no longer access iphoto on the mac book pro. I have tried library manager but that does not work. Any suggestions?

I have a mac pro which I recently made to share with my mac desktop. iphoto was updated on the mac pro from 8.2.1 and I can no longer open iphoto. I get an error message You can’t open your current photo library using this version of iPhoto. The only option is for me to quit. I have tried to restore with no luck. I tried reinstalling using my Application CD. Help?????

when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
LN

Upgrade from sqlserver 2008 to sqlserver 2014, can I put software into different drive other than C: ?

Originally my sqlserver 2008 software was installed into E:, but I didn't see any drive selection options available during the upgrade steps, so now my sqlserver 2014 is installed into default C: drive.
If there are any ways to specify different drive ?
Thanks
Sophia Su

“Upon doing the initial upgrade, can I designate the target drive/letter”?
I didn’t see a place to change it in the upgrade process.
I don't want to uninstall sqlserver 2008, I just want to upgrade from 2008 to 2014 and be able to put the sqlserver 2014 software into the same drive (not C:) as my sqlserver 2008 is.
If previous version was on E drive upgraded version should remain on E drive as well. AFAIK there does not comes an option to specify different drive letter when doing in place upgrade how ever if you do side by side upgrade you can install new instance
of 2014 on what ever drive you like
In side by side upgrade you have to first install SQL Server 2014 and then move databases using backup and restore then migrate logins and jobs using scripting method.
After you are sure your upgrade process is complete you can uninstall 2008 instance.
How do you check your SQL Server 2014 is installed on C drive. Please note even if you install SQL server on some other drive(like D,E..) some binaries always go on C drive thet nature is by default , if you are looking at binaries then its wrong to
deduce that your SQL Server is on C drive.
Can you go to E drive can you see program files..Microsoft SQL Server ?
Please also read file location of Installed SQL server Instance
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

I just upgraded from LR3.3 to LR5 and can't print now....

I just upgraded from LR3.3 to LR5 and now when printing on my Epson 2880 the image is printing only a portion of my image - not placing it properly on the page as it appears in the print preview. I have checked with Epson and they confirm all my page size specs and print preferences are correct - Epson says it's a software glitch. The image looks right on the screen in the print preview - yet places the image in a corner of the page when printing, cutting off half of it. Tried it both on 8.5x11 and on 13x19 with two images and had the same problem. I need this fixed ASAP thanks @Adobe @JaneSzaboPhoto

Yes, I have the paper set up properly as 13" x 19" (or 8.5 x 11 when trying more than one size) and even reviewed this over the phone with Epson. All setting are correct and it looks right on the print preview - but shifts the image to the top left of the page and shrinks the image and cuts off the top of the image.....no matter what paper size.

What to be aware of upgrading from 10.2.8 to Tiger

I have an iMac superdrive G4 17" flatpanel. I am running on 10.2.8 currently but am considering upgrading to Tiger. What should I be aware of with regards to my software if I do upgrade - most importantly my Photoshop 7, Illustrator 10, InDesign 2 (am not wanting to invest in all the upgrades of that and Tiger at the same time) -or for my Epson printer drive? I'm just worried that I'll upgrade and find that much of what is on my computer will now have difficulties and require more $...
Any help or advice?
thanks,
Tracy

Hello TracyZ:
Welcome to Apple discussions.
I do not use those applications so I have no first hand knowledge. I would check with the manufacturer's web site to check on compatibility. You might also do a search of the OS X 10.4 forums to gain additional information. The printer "should" work - but, again, check to see if Epson has upgraded the driver to work with Tiger.
If you decide to upgrade, have a good backup (I just described my own approach to back up and upgrading here):
Barry Hemphill, "BACK UP" #3, 07:32am Nov 3, 2005 CDT
I am a fan of OS X 10.4 - I really like the Safari version (2.0.1). That Safari has a built-in RSS reader - great for us news junkies.
Barry

I've upgraded from iPhone 4 to 5, and can't upload from iCloud

I've upgraded from iPhone 4 to 5, and I'm got as far as 'restore from iCloud'. And it says iOS 6.1.3. Required. So i went back to freshly backed up iPhone 4 and checked that it had iOS 6.1.3 all ready. There's no updates on settings icon

Personally, when upgrading to a new device and wanting to download from a backup of the older device to set up the new device, I ALWAYS do the backup and restore from my computer's itunes. It's much more reliable than icloud.

Upgraded from 10.3 to 10.5, can't find old mail

I just upgraded from 10.3 to 10.5 and cannot figure out how to get my old mail messages. It receives new mail and sends find, so I know all the account info was kept and restored, but it didn't seem to transfer my old messages. Any ideas?

I just installed Leopard today and updated to 10.5.3, and have exactly the same problem. If you find out what happened, please post it. Thanks.

Upgrade from 10.1.2 to Tiger (can it be done)

Similar Messages

Maybe you are looking for