Upgrade ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1).

I just upgraded my ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1). I bought the phone online in Canada but have a Hong Kong simcard. Any solution to connect to network?

I bought mine in the US and activated using a German SIM. It worked fine first on 6.0.1. After upgrading to 6.0.2 the SIM does not work. I have reset the reset the phone and still does not work. I loaded a new SIM and the phone worked for few minutes before going to Searching mode after I restarted the device. I am being told by the Genius Bar team that this is a Hardware failure.

Similar Messages

I put the BT WiFi app on my iPad Mini and now I can't connect to the internet. Please help

I put the Bt WiFi app on my iPad Mini and now I can't connect to the internet. Please Help

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I updated my iPad software to 7.0 and now I can't connect to my network, although I reset and restarted iPad. Network connection is fine on all other devices

I updated my iPad 2 software to 7.0.3?(the latest update), and now I can't connect to my network. I tried reset and restart and that did not work. I have no network problems with my other devices.

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

I installed the latest ios8 upgrade on my iPad mini yesterday and now I can't iprint. The printer issues a 'urf error'. Any suggestions.

I Installed the latest ios8 upgrade on my iPad mini and now I can't iprint. The printer issues a 'urf error'.

1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print.

Just downloaded the new IOS for my Iphone 3gs and now i cant get connected to the network. It only states "searching". How do i fix this?

I downloaded the new IOS last week and my phone can no longer find the network it only states "searching" How do I fix this for the 3gs?

If you have important files that haven't been backup then you can try this by holding down power and home till it restarts and release when you see apple logo.
If you have nothing to lose, you can do a fresh restore by holding down power and home for 10 seconds and after 10 seconds release power but keep holding home till iTunes recognize it is in recovery mode and restore iphone.

I upgraded to 4RC and now I can't connect to the internet at all.

I deleted Firefox, and now even with IE, it won't connect. With Firefox, it was saying something about the proxy settings, now with IE, it says the remote device or resource won't accept the connection. Please help!!

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

Updated to iTunes 7.6 and now i can't connect to the store

I getting an error message saying it timed out. This happened when i first downloaded iTunes 7.5 on my new Vista running computer a month ago but i fixed it by going into Norton and putting iTunes to allow. I went to go do the same thign because maybe it reset but it is still on allow. Can someone please help me.

I posted this in another thread, but read the bottom paragraph.....Even though Norton says allow for iTunes, my was still blocked as well. It's running fine now though since I've cleared out the programs list and rules tab and started over. Norton sets a no TCP rule I couldn't figure out so I cleared them all out.
I disabled only the personal firewall in Norton Internet Security and it connected straight away. When I found out this worked, I tried just allowing the four apple programs the personal firewall monitors and no joy. I will find which program is being blocked, but disabling the entire personal fire wall will work.
BTW, in my case I was getting the connection timed out but the iTunes diagnostics said the connection was fine but never connected to the store successfully
Some how Norton Internet Security set itself to block outbound TCP connections during the upgrade, even though iTunes was still set to allow all connections in and out. I couldn't figure out which rule to change. To get the firewall running again, I had to use the reset botton (in Norton Internet Security) to clear out all the rules and programs and then manually add iTunes with allow all privileges to the program list. CAUTION: until Norton repopulates privileges for other programs, you may need to add them manually.....this includes Internet Explorer or any other browser you may use.

Moved my laptop and now I can't connect to the router

I'm a novice at this - but that didn't stop me from setting up a wireless network - it was very easy, everything went fine and was working great for months. I took the laptop out of the house and used it at another location. When I brought the laptop home again it asked for a password - which do I use the passphrase or Key 1? Should I expect this to happen everytime I mobilize the laptop? My router is WRT54G. Thanks!

Connect to your router with a cable and name your network different. "linksys" is the default network name of a Linksys wireless router. Anyone you buys a Linksys router and just plugs it without changing it ends up with it. Maybe another neighbor bought a Linksys router as well. Thus, always rename the network name to something unique so that you can be sure that you connect to your network and not to somebody else's. Because the problem is: when your computer searches for wireless networks it only checks the name of the network. It does not show whether there is only one access point with that name or several. It could be a roaming network where several access points must have the same name or it could be just accident like several people running routers with the default name. Therefore: connect to your router with a cable, open http://192.168.1.1/ and reconfigure the wireless network name (SSID) on the wireless tab to something else. Connect to that network...

I've just upgraded to Lion and now iTunes can't connect to the iTunes store.....??

I've repaired Keychain, re-installed iTunes and it still won't work.....
Please help.
Jeremy

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

I updated to iTunes 10.5 and now I can't connect to iTunes store

I updated to iTunes 10.5 and now I can't connect to the iTunes store. Anybody else having this problem?

I made some progress. The problem is thatiTunes is looking for a certain LSP (Layered Serviice Provider). Some antivirus software (PCTools in my case, wants another one.
1) Disable andy spyware
2) run command "netsh winsock reset" and reboot.
3) Voila it works.
I don't know all the consequences of this change but somebody is going to need their products' code.
Be careful, I know this works for me, but your mileage may vary.

Upgraded to OSX 10.8.2 and now I can't run any downloaded dmg files.

Upgraded to OSX 10.8.2 and now I can't run any downloaded dmg files. Says "the Following disk images couldn't be opened". and then say's there "isn't enough disk space" I'm pretty sure it has something to do with apps that are not approved by the app store. How can I turn it off?

Select your hard drive in the Finder and choose File -> Get Info. What is the available space?

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try.

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

SSign in to the App Store using the Apple ID that was used to purchase the software.

IMovie wii no longer share with iDVD. I just upgraded to Yosemite 10.10.2 and now I can't get iDVD to work properly. Any thoughts?

iMovie wii no longer share with iDVD. I just upgraded to Yosemite 10.10.2 and now I can't get iDVD to work properly. Any thoughts? This is what comes up.....

iDVD does work with Yosemite although, as Kappy pointed out unsupported for 2 years, so try this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/Preferences folder.
2 - delete the contents of IDVD'S cache folder: User/Home/Library/Caches/com.apple.iDVD.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks or Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
If iDVD crashes again post the first 50 lines of the crash report. Don't post a screenshot but copy and paste the actual text.
To get a movie from iMovie to iDVD it should be exported out of iMovie as 480p and added manually to iDVD.

HT1338 Upgraded iPad and now browser can't connect to most websites I search

Upgraded iPad and now browser can't connect to most websites I search

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
For Safari... Settings > Safari > Clear History Data & Cookies

Upgrade ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1).

Similar Messages

Maybe you are looking for