Upgrading to OS X 10.5 with Family Packs

I would like to update my old PowerPMacs and my Intel iMac to OS X 10.5 Leopard on the following computers:
eMac 700Mhz running 10.3.9
12in Powerbook 867Mhz running 10.3.9
15in Powerbook 1.67Ghz running 10.4.11
20i Intel iMac 2 Ghz CoreDuo running 10.4.11
I know it might be impossible to actually get hold of Leopard nowadays, my eMac and 12inch Powerbook might struggle to run Leopard, and I will want to upgrade the iMac further, but my main question is this. If I see a 'used' copy of a Family Pack for`Leopard, say on eBay, is it safe to buy? Or if it says it has been used on two computers, will I only be able to install it on three of my own?
Any help on this matter would be greatly appreciated. The older Macs are running things like Youtube slowly at low res, and Flash video sites are a pain. Plus the 15in Powerbook keeps looking for plugin updates on everything. I know upgrading to Leopard is as far as I can go on the PowerPc Macs, but as the computers can still be used, I would like to get them running as best as possible, even if this circumstance will obviously reoccur as time goes on.
Mark

I wonder if there would be any point trying to get a Family pack for 10.4 Tiger for the eMac and 12inch Powerbook! lol
I wouldn't think so. Installing Tiger is not going to rejuvenate them. 
Is there a link tro the various types of OS X upgrades? I should be trying to get discs that are black with the large'X' across the full disc, correct? The grey discs that come with your Macs are not the ones to get (Install/Recovery)?
Correct, the grey disks are model specfic and they may not load.  
The following shows retail disks OS 10.1 10.2 10.3
-----------------------------  10.4 10.5 10.6
The point to consider is the last one, Snow Leopard (for your intel) was until recently, availble for only $30. It may still be possible to order one if you ring an Apple store.

Similar Messages

  • Install failure due to "faulty DVD" problem: only with Family Pack?

    After going through a few threads on the subject of installation failure due to tbe pseudo-faulty DVD, I have the impression that many users mention that they were using a Family Pack install DVD or in one case a "drop in". The former is my case. Please post if you have had this problem with Leopard install, and whether you were using a single licence, family pack or drop in. It's just a hunch, but perhaps this problem only affects a specific set of disks.

    I believe that they are holding back on sending a new DVD until they know why there were defective ones. I read somewhere that they require a new SKU so that they will actually be a separate batch.
    Can you borrow a DVD from anyone to install Leopard? You certainly would be allowed to legally do that. I am surmising that Apple is overloaded with requests for a replacement DVD and really want to make sure it works. You know that old thing about "fool me once..."
    Stuff happens - but with Leopard, a lot of stuff sure happened at once. They sold 2 million DVDs. If only 5% have problems, that's a lot of problems to deal with, one at a time.
    In time it will sort itself out, but in the meantime the rooms are full of smoke

  • Upgrade from a single license to a family pack...?

    Is it possible to upgrade a single user license for iWork 09 to a family pack? Sorry for posting here, there is no forum under iWork it seems. Thanks for any help.

    Mac Daddy 08 wrote:
    I think the point of his question is, He wants to remove single user copy from his Mac, install family copy to all of his Mac's, and then possibly resale his single user copy.
    I also would like to possibly do the same thing. When I upgraded to iLife '09, I only owned 1 Macbook, now I own 2 Macbooks and I would like to upgrade to family license. When I upgrade can't I resale my single user copy?
    Check your licence agreement. If it doesn't prohibit transferring the (single user) licence, then it would seem reasonable to assume you can do so. Being neither a lawyer nor an Apple representative, my advice remains the same as before: This might be a question best answered at an Apple Store or another authorized reseller.
    Regards,
    Barry

  • Can I upgrade my single user license to a family pack?

    I recenlty purchased a Single User License for tiger, and am now wanting to buy a used computer that has been completely wiped, so it has no operating system or anything. Can I upgrade from the single user so I am not breaking the law, but not pay $200?

    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Trouble with Family Pack

    SL installed fine on the first computer. On the second, the DVD won't even load. The machine tries to read the disk, but then ejects it. Any ideas?

    It's an early 08 white Macbook. I think it might actually be the DVD drive. Like the other commenter, my wife never uses it, so it could have gotten messed up a while back without our knowing. It's spitting out other DVD's too. I can't believe I didn't try that before posting! Thank goodness for AppleCare.

  • IPod Touch upgrade to use iMessage and it syncs with Dad's iPhone info!!! Using family pack Mobile Me. HELP???

    I have three children that use iPod Touches. They are all iOS5 capable. I upgraded the first one this morning and it synced with my iPhone profile on iCloud. It asked for the iTunes account information which is what I believe caused this. We use Mobile Me Family Pack and each of the children have a unique @me.com account. How do I fix this problem so that each iPod has it's own unique login so that iMessage will work? I don't really want to open them up to any further exposure  on the Web though... . As it stands I am able "micromanage" their contact list via Mobile Me. Is there any way to make the iPods behave correctly and still maintain parental control as well as allow them to keep their unique profiles and contact lists???
    ...and for some reason, after upgrading my son's iPod Touch... his apps all disappeared from the device??? Strange, as this worked perfectly when I upgraded my iPhone yesterday.
    PS. All my upgrades are current. iOS5 on iPhone 4, iTunes 10.5 on MBP.

    I spent about 2 hours on the phone with Apple Support... had to restore both devices! Arrrgggghhh!!! Thankfully the iPhone had a Backup from yesterday. The iPod wasn't too tough to get back up and running either... although we had to completely reload it as if it were new. Then we found out that Apple won't let the device login with my son's @me.com email because he's too young (10). Quick work-around for now until Apple fixes this was to lie about his age in the setup. I don't like the work around, but it worked.

  • Issue with Family Sharing and unshareable apps

    My husband and I just upgraded to iPhone 6's with iOS 8.0.  Previously, we both used my Apple ID for all app purchases on our old phones.  With iOS 8.0, we turned on the Family Sharing feature.  We would both like to install the mobile app for our bank (TD (Canada)).  With Family Sharing turned on, this app is listed as one of my purchases.  However, it is also listed as "unshareable".  I can install the app on my phone, but when my husband tries to install the app, he gets a message saying that the app has already been purchased using a different Apple ID and cannot be installed on his phone.  Note that on his phone, he does not even see the app under my purchases when he goes to App Store | Updates | Purchased.  However, if he searches for the app in the App Store, instead of a "FREE" button, he sees the iCloud download icon.
    Has anyone else run into this problem and figured out how to fix it, or is this just an iOS 8.0/iTunes/App Store/iCloud bug?  It actually does not make sense that a free banking app would be "unshareable" under Family Sharing in the first place since several members of the same family will most likely use the same bank.
    Thanks for your help!

    I have the same issue.  I spent an hour on the phone with Apple and they don't have a clean fix for it.  The issue seems to be with apps that developers have not yet set the Family share-able flag as yes or no.  They said that when developers update the flag this will resolve itself.  Meanwhile, if in the app store the details of the app under Family Sharing it says "Not Available" it will be an issue. I found a reasonable workaround for this particular issue by hiding the original purchase and "re-purchasing" as follows:     Disclaimer/Note: Not all Apps are share-able, (even free ones.)  If the app you are trying to deal with is an actual paid for app, you will be buying it again!  Better to wait until the core issue gets fixed, unless you are willing to pay for it again.
    1.  On a PC or Mac, in iTunes, have the original purchaser log in to the iTunes store, then under Quick Links click on Purchased.  Click on Apps at the top and find the app that is at issue. (Hint:  The apps are not necessarily listed under the obvious app name.  I was looking for Colorspot from  SherwinWilliams, and found it under SherwinWlliams, not Colorspot.)  Once you find the app, hover over it and click on the X in the upper left corner to hide it.  Do this for all the apps that are at issue. (See Disclaimer/Note above)
    2.  On the iOS device that is having the problem, close the App Store app. (If you have many apps at issue you might make a list, or take a screenshot first)
    3.  On the same iOS device, find the app and delete it.  (not ideal but it works!).  Once you have all the apps at issue deleted, reboot, and make sure you are logged in to the iTunes store as the secondary "purchaser", (If you are logged in as the original purchaser you probably wouldn't have the issue in the first place, although to me that means going a bit backwards and not really using the Family Sharing program.)
    4.  Open the App store app, if you started the whole process with an app that wouldn't update, confirm that the app is no longer listed.
    5.  Search the store for the problem app as though it was a new purchase (at this point it is.)  Once found, it should be listed with the "Free" or a "price" icon. If it shows the cloud and download arrow icon the hiding you did in step 1 hasn't updated yet.  Wait awhile longer. (Reboot again? Re-log into store again?)  (Also note here, that a properly shared app will show the cloud/download arrow icon and would be download-able without issue.)  If it shows as Update, it hasn't actually been deleted from the device.  If all is well, you should be able to proceed with a typical "purchase" of the item.  (See Disclaimer/Note above) If the family member has multiple devices, repeat 2-5 for each device.
    If you have multiple family sharing members wanting the app you will have to repeat  step 1, hiding the purchase in each iTunes account until all family members have gone through the re-purchase process.  After fixing all of their devices, each person can go back into iTunes, click on Account under Quick Links, go to iTunes in the Cloud section, Hidden Purchases line, click Manage, and unhide the hidden apps.  This would be important for future sharing when the bugs get worked out.
    Good luck!

  • Upgrading to 10.5 - Do I need a family pack?

    I have a mac book pro and a powerpc g5. I want to upgrade them both to leopard and I'm getting conflicting messages about whether I can do it with a single user license or not. Can I? Do I have to buy the family package?

    I don't agree. It looks to me that he asked that exact question and that would begin the point where it gets silly.
    The way I read this thread is that someone wants to know if you need a family pack to install Leopard onto multiple computers (Post 1).
    He's told that he actually needs the family pack or he will be breaking the EULA (Post 2)
    He then posts a question if it will be difficult to do with just the *single user version* (Post 3) The it in the first post is to use a single user license on multiple computers.
    Now if the original message didn't already say he wanted to install a single license to multiple computers, then maybe his question should be "would it be hard to install Leopard to a single machine?" That question has nothing to do with this thread.
    That's the way it reads. No mind reading is possible. I read what he says and don't assume anything. If the subject is changed, then post a new thread or at least make it clear the subject has changed. He still needs a family pack to install Leopard to multiple computers. If he doesn't want to buy one, then he will have to go elsewhere for installation information that breaks the EULA.
    The original post was not a silly question.
    I got a feeling this post will get modified

  • Using iWeb with MobileMe family pack

    I just upgraded to the family pack for mobile me. I had been using it for my homepage, but now I'd like to make a homepage for my son, and my wife wants to make a homepage as well.
    How is this handled in iWeb? I don't see a way to tell it where to publish which site when I add a new site.
    What is the easiest way to handle multiple mobile me websites on one mac?
    Thanks.

    Not having used the sharing option since there's only one user on my Mac, I don't know the ins and outs of what you want to do. Terence Develin might. If you want to share the library with all users and have them be able to access the library, import new file and perform edits then the best solution is to put the library on an external HD whose ownership has been set to off. This Apple document explains the process: iPhoto: Sharing libraries among multiple users.
    The drive can also be used to backup other files as well.
    OT

  • Upgrade to family pack mobile me query

    Hi
    I think I know the answer to this but just wanted to confirm. I have a single account mobile me and wanted to know if I could upgrade to family pack or add one more e-mail account without having to pay the full cost of a new family pack (ie £87)
    thanks

    I have a single account mobile me and wanted to know if I could upgrade to family pack or add one more e-mail account without having to pay the full cost of a new family pack (ie £87)
    You will be charged the proportion of the difference between the individual and family pack for the remaining time of your current year's subscription, as long as you pay by credit card. If you buy a 'retail pack' you will have to wait until the current subscription expires.
    A Family Pack gives you four sub-accounts, each with its own email address. There are no email-only accounts.

  • In Settings\iCloud Don't See "upgrade to iCloud drive" or "set up family sharing"

    I would like to use family sharing.  We have iOS8, but in Settings\iCloud we don't see "upgrade to iCloud drive" or "set up family sharing".  I am unsure what else to do.  I searched support, but they all see to assume we can see these settings.
    Help!

    Hi wmcknigh,
    Welcome to Apple Support Communities.
    The article below should help you resolve the issue with shared content not appearing after setting up Family sharing on the MacBook Pros.
    If you don't see your family's shared content - Apple Support
    Cheers,
    -Jason

  • Syncing 2 iphones with Mobileme account and family pack account

    I can't seem to get this answered.. I have a .mac (mobileme) account and I just upgraded the account to the family plan which give me 4 additional accounts. I am trying to sync the second email account up with my ical and contacts and I can't figure out how to accomplish this. The ical and contacts are under my email and not the family pack email. I would like to know how you share ical and contacts with multiple iphones..........

    Probably, but that would result in much logging in and out as we both access the home computer many times in one day. Also, I find that Windows XP slows down a bit with multiple accounts. (Still haven't upgraded to Mac yet... It's coming!) I'll give it a shot when I get home and see if it works. Thank you.
    Does anyone else have any experience with this setup?

  • Can Mac Box Set Family Pack (10.6)  upgrade Tiger (10.4) ?

    Hello,
    I bought "Mac Box Set Family Pack (10.6)" (Product Number MC210Z/A) primarily to upgrade three Leopard Al Macbook machines.
    I have two Tiger (10.4.11) - one MB white with Core 2 Duo and one MBP with Core Duo. May I know if the upgrade will work for these machines as well ?
    Thanks!

    Hi. A couple of corrections. Mr. Mossberg is at the Wall Street Journal. He in fact, let the cat out of the bag that you can indeed upgrade directly from Tiger. see here:
    http://theappleblog.com/2009/08/27/tip-from-mossberg-snow-leopard-upgrade-good-f or-all/
    That being said, I have not tried this myself, so I cannot say with certainty that it will work.
    A good idea would be to try to upgrade to an external FW drive, so you can test first. Second, remember that you will need to update many apps that are Tiger apps to work with SL.
    Good luck
    David

  • Upgrading to Family Pack

    I purchased a single-install version of iWork '08 thinking I would install it on only one computer but Numbers is so great, I want to install it on my other two machines. Is there a way to "upgrade" my single-install serial number with a Family Pack serial number?
    Thanks,
    Jerry

    This question came up quite a few times after family packs were introduced for iWork '05 a few months after the original release. The answer was "no." But there is a 10- or 14-day return policy on unopened software. You could return the single-license & buy a family pack.
    I suggest anyone not sure if they will want a single license or family pack to download the iWork '08 trial & use it before you decide.

  • Upgrading to a family pack

    Can I just upgrade to a family pack if I have iWork-single user? I just bought a new iMac.

    I don't agree. It looks to me that he asked that exact question and that would begin the point where it gets silly.
    The way I read this thread is that someone wants to know if you need a family pack to install Leopard onto multiple computers (Post 1).
    He's told that he actually needs the family pack or he will be breaking the EULA (Post 2)
    He then posts a question if it will be difficult to do with just the *single user version* (Post 3) The it in the first post is to use a single user license on multiple computers.
    Now if the original message didn't already say he wanted to install a single license to multiple computers, then maybe his question should be "would it be hard to install Leopard to a single machine?" That question has nothing to do with this thread.
    That's the way it reads. No mind reading is possible. I read what he says and don't assume anything. If the subject is changed, then post a new thread or at least make it clear the subject has changed. He still needs a family pack to install Leopard to multiple computers. If he doesn't want to buy one, then he will have to go elsewhere for installation information that breaks the EULA.
    The original post was not a silly question.
    I got a feeling this post will get modified

Maybe you are looking for

  • Problem with group concat

    Hello, I would like to group concat my data : instead of having : Here's my output data : ID | Brand 55 | Xcel 55 | DCS I would like to get : ID | Brand 55 | XCEL, DCS but when I'm using the function wm_concat or group concat I've an error message. T

  • Some new messages are highlighted in red

    I have received 2 or 3 messages lately that show up in my inbox highlighted in fire truck red. I'm not saying the message is listed in a red font. It's like a red color label has been applied and I'm not sure how it got there. It's not as a result of

  • Change print-design in WAD 7.0

    Hello, I have a question concerning the redefinition of layouts in wad 7.0. I created a css-file where I redefine some WAD-classes (e.g. .urTxtStd, .urTxtEmph). Now i want to assume the redefinitions of the classes into the print-layout. When I print

  • WCS error COMMON-1 after login completed

    Hi Expert, I found WCS Sytem Error Page was displayed after login completed for while. How can i fix about this? Thanks WCS System Error Page Error(s): You must correct following error(s) before proceeding: Error:COMMON-1: Some unexpected internal er

  • SAP certification of Oracle 11g

    Do you know if SAP has published plans for certification of Oracle 11G. When it is going to be certified by SAP and which version will it be? 11.1.0.6?