Upload categories master catalog

Hi to all,
- I am working in the extended classic scenario
- release 5.0
- file .CSV 2.0
I have a problem uploading the categories of the master catalog:
when i go to edit the master catalog, the system doesn't permit to see the categories and i can read the following error message:"not category in the master catalog".
The master catalog is in error.
I can see that it has no category (it is empty) and there are two red dots, one under "published" and one under "uploaded".
So I want one of the following:
1.To create a new master catalog, can you help me step by step?
2.Is it possible to have a general file in format .CSV to upload my master catalogin error?
Best regards.
thanks a lot.
DaviMarc

Hi DaviMarc,
Which version and SP of CCM are you using? if you have problems to edit your master catalog you can check OSS Note 1024002 (depends of your version)
On the other hand I have an example of the file to upload the schema to the master catalog, give me your ID and I can send you
Regards,
José Luis D.

Similar Messages

Error while uploading schema for Master Catalog

Guys,
I got the below error while uploading Schema with custom char for Master catalog;
"Error in row 11 of the CSV file" where as the 11th row is "DataType;INTEGER;integer;Integer Type"
in the csv file. Please suggest.
Regards
TGB

Hi,
Check txn-SLG1 in SRM system. There if you go to details, you will see exact description of error.
There are some dos and donts for csv files. for e.g you can't put : , / etc.symbols in the csv file.
Regards,
Sanjeev

Upload Material Master to non SAP Catalog

Hi Guys,
we are trying to create a process to upload Material Master and/or Purchasing Info Recordes data directly from the backend into an non-SAP catalog. So far I only know about report BBP_CCM_CATALOG_TRANSFER, that uploads replicated material master from SRM into CCM or MDM Catalog.
Are there reports available in the backend (ECC6 EhP3) or in SRM 700 that could extract the data from Material Master and Purchasing Info Records into a format (XML;CSV,..) that could be used to upload these data into a catalog manually or via PI.
Any hints are welcome!
Thx
Dieter

Hi Dieter,
Yes you can run MECCM in your ECC system to transfer PIR and contracts as XML files.
Regards,
Nikhil

No entry was generated in Master catalog after contract upload by PI...

We use CCM 2.0 as percurment catalog in SRM 7.0 server.
1.I finish the basic configuration and tranfer the product catalog to the CCM.
2.Then I do the mapping of product cat to master cat.
3.I finished the PI scenarios for upload contract.
4.When I publish a contract in the potral, I check the PI monitor is fine.
5.I check the CCM log more,but there is a warning message 'No original catalog item found for contract catalog item 1'.
6.The contract upload successfully and it occurs in the ccm cataloags.
7.The log showed that
19.09.2010 16:09:01 (CET): Starting mapping
19.09.2010 16:09:01 (CET): Starting mapping analysis for catalog 4400000049 -> /CCM/MASTER_CATALOG
19.09.2010 16:09:04 (CET): Mapping completed for catalog /CCM/MASTER_CATALOG
19.09.2010 16:09:04 (CET): Mapping completed for catalog 4400000049
But unfortunately,there is no entry in the master catalog for this contract.
Could you give me some suggestion?
Much appreciated~~~

Looks like the catalog was unable to be enriched from existing data - does this contract item exist in the SRM product catalog or a supplier catalog for enrichment to take place?
Regards.
Jason

Material/service master catalog upload (ECC-CCM)

SRM have 2 possible scenarios to upload the material master data to CCM:
1- Upload material master data from ECC to SRM and, after, from SRM to CCM.
2- Upload material master data directly from ECC to SRM.
Does anybody know the name of the transaction or report in ECC to upload the material/service master catalog directly to CCM?
Best regards,
Cristiano Soares

Hi All-
I have about 3 tricky questions concerning CCM-ECC Integration
1.) Does anybody have any idea on how to upload Material and Service master from ECC 6.0 directly into the CCM 2.0 system. Is there any standard program like we have in SRM called as BBP_CCM_TRANSFER_CATALOG. I
2.) Also are there any complications or is it possble to integrate CCM 2.0 directly from ME51n? I am aware that PM and PS out-of-the-box can be directly integrated to CCM. Is there a similar way to achieve this functionality. If yes can anybody give me some pointers on this.
3.) Are there any complications involved with uploading service masters and interfacing CCM to EBP or ECC and directly using the service master from CCM to create a Shopping cart (CCM-EBP) or a purchase requisition (CCM-ECC).
I hope some one can throw some light on these questions.
Suitable points will be rewarded for helpfull answers !!
Thanks,
Sundeep

How to upload Master Catalog Schema in Catalog Content Management SRM

Hi All,
Please provide the solution as we are in real trouble.
We have to delete master catalog and upload it again. Deletion is done because the mapping and all are being corrupted. SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog.
Can all of you guide us what to do:
1. How to delete a existing Master catalog (can de-publish will do it?)?
2. We have the master catalog schema with us. Please tell how to upload this schema. Which link we have to follow?
3. After uploading the master schema how we can check that master catalog is working fine.
The answers will be rewarded with valuable points
Regards
Praveen K Ghosh

Sridhar,
I am contacting you regarding the same problem with the CCM MASTER CATALOG, as Praveen said, SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog.
I have read the documents that you refer to at http://help.sap.com/saphelp_srm50/helpdata/en/7f/9b62405c910272e10000000a155106/frameset.htm.
In this link I found information really useful, however according to the document the CCM MASTER CATALOG should be created automatically by the SAP Catalog Authoring Tool, this happends the first time that you are using the system.
Catalog Creation
You use this function to create catalogs in SAP Catalog Authoring Tool.
You can create the following types of catalogs:
Supplier catalogs
Procurement catalogs
Model service catalogs
Note
SAP Catalog Authoring Tool creates the master catalog, the SRM product catalog, SRM contract catalogs, and the contract catalog for service specifications automatically.
When SAP Catalog Authoring Tool is used for the first time, you must open the Edit Catalogs application once, before you create any catalogs. Choosing Edit Catalogs triggers the creation of the master catalog. If you do not do this, SAP Catalog Authoring Tool outputs an error message when you try to create a catalog.
We have already the Master Schema and we know how to map the CCM MASTER CATALOG to the supplier and procurement catalogs. The main problem is that we need to delete the CCM/MASTERCATALOG and created again.
1. How delete the CCM/MASTERCATALOG?
In a Test enviroment I have delete the CCM/MASTERCATALOG using the "Edit Catalogs" mode then choosing the catalog and confirm the deletion.
Once this has been done, all the catalogs has been erased including the CCM/MASTERCATALOG, so now we have the system in blank. I am not sure if this is the correct way to delete the catalog or there is an easiest way where the Procurement and supplier catalogs dont dissapear once the CCM/MASTERCATALOG is deleted.
2. Once the CCM/MASTERCATAOG is deleted how to created again?
According to the instructions the SAP Catalog Authoring Tool should created this automatically when is used for the first time, however how we can created the CCM/MASTERCATALOG again if the SAP Catalog Authoring Tool is not used for the fist time.
Is there a way where the system can create the CCM/MASTERCATALOG for a second time?
I follow the steps to create the CCM/MASTERCATALOG for the first time however i didnt get a positive result.
Any help provided will be really appreciated.
Thanks in advance
Carlos

Master Catalog Schema Upload

Hi SRM Gurus,
Can any one of us, please guide me in, uploading the schema for Master Catalog.
I would like to upload UNSPSC schema.
Thanks & Regards,
Ramkumar

Hi Ramkumar,
Have you prepared the CCM Schema yet? IF NOT Check these links
http://help.sap.com/saphelp_ccm20/helpdata/en/1f/d31a9fcb00459faa571f09e89a5cba/content.htm
http://help.sap.com/saphelp_ccm20/helpdata/en/e1/eddebb4b63453cbf209027e0816b8c/content.htm
Yes you can prepare your own UNSPSC Schema for your Catalog system.
for more question post again..
with regards,
mahesh

Master catalog schema.......

Hi
I have created Master catalog in CCM 1.0 through Edit Catalog link.
When I tried to edit the Master catalog it says " No schema found for catalog /CCM/MASTER_CATALOG.
Now I want to upload UNSPSC achema for Master catalog.
Where can I get the UNSPSC schema?
Note : TREX is not installed.
Thanks
Jagdish

Hi,
To upload the UNSPSC as your catalog schema, you have to follow the CCM CSV 2.0 file format.
Here is a sample of what it should be:
SAP CATALOG CSV 2.0 <;> full;;;;;;;
Defaults;EN-US;;;;;;;
Model;;;;;;;;
Catalog;;;Your catalog name;;;;;
#Datatype & component definition;;;;;;;;
DataType;MyDecimal;Exponent;{}MyDecimal;;;;;
DataType;MyInteger;Integer;{}MyInteger;;;;;
DataType;MyString;String;{}MyString;;;;;
DataType;MyPrice;complex;{}MyPrice;ZC_PRIX_NET;ZC_DEVISE;ZC_PRIX_BRUT;ZC_QTE;ZC_REMISE
Component;ZC_PRIX_NET;MyDecimal;false;MyPrice;{}Net Price;;;
Component;ZC_DEVISE;MyString;false;MyPrice;{}Currency;;;
Component;ZC_PRIX_BRUT;MyDecimal;false;MyPrice;{}Brut Price;;;
Component;ZC_QTE;MyInteger;false;MyPrice;{}Lower Bound;;;
Component;ZC_REMISE;MyInteger;false;MyPrice;{}% Discount;;;
DataType;MySpec;complex;{}MySpecification;ZC_NAME;ZC_VALUE;;;
Component;ZC_NAME;MyString;false;MySpec;{}Name;;;
Component;ZC_VALUE;MyString;false;MySpec;{}Value
#Specific characteristic definition;;;;;
Characteristic;ZCATEGORY;/CCM/NAME;false;{}Supplier Category;
Characteristic;ZCATEGORY1;/CCM/NAME;false;{}Hierarchy n+1;
Characteristic;ZCATEGORY2;/CCM/NAME;false;{}Hierarchy n+2;
#Catalog schema definition: schema name followed by all specific characteristics
Schema;MY_SCHEMA;{}
MY_SCHEMA;ZCATEGORY;ZCATEGORY1;ZCATEGORY2
#Categories derfinition: for each UNSPSC "node" declare the node and its parentCategory;Root;;;{}UNSPSC Root;
Category;Level 1 segment 1;Root;;{}Segment 1;
Category;Level 1 segment 2;Root;;{}Segment 2;
Category;Level 1 segment 3;Root;;{}Segment 3;
Category;Level 1 segment 4;Root;;{}Segment 4;
If you want you can send me your file, I'll start the work with few UNSPSC codes to show you (follow my BC link to get my email.)
Regards.
Vadim

CCM 2.0: Status of items is not changed in Master Catalog

Hello all,
when I upload the same items in Supplier Catalog in Master Catalog and Procurement Catalog for items status is not changed from "Approved" to "Not Approved".
Funny thing is that items need to be approved to go to Procurement Catalog from Master and to publish Procurement Catalog.
What to do?
Gordan

Hello Gordan,
do you mean that in CAT customizing you have your /ccm/master_catalog with "approved" value and the name of your procurement with "To approve" value?
Best regards
Jorge

Uploading of Master Schema in CCM 2.0

Hello Seniors,
We are implementing CCM 2.0 as per landscape given below:
SRM release 4.0
EBP component 5.5
Scenario being implemented SSP and CCM
(employee should be able to create shopping cart for catalog items through EBP)
CCM and EBP are in same client
No XI installed as we will be uploading CSV catalogs only.
Now, when I start with the basic step of uploading master schema and click on "upload" button in edit catalog , no selection box appears so that I can browse CSV file from my local m/c. When I try to check the URL linked to "upload" button , no URL is found.
I know that config guide says that for first time we should click "edit catalogs" first. But I am not sure whether anybody has clicked any other button as I joined late on this project.
I have run the report " /CCM/INITIALIZE_CME" on the CCM system.
Pl. help.
You are most welcome for any clarifications required.
Thanking in advance.
Regards,
Dinesh Powale
093238 73714

Hello CCM seniors,
I request you to go through the earlier communication of this thread.
Now the status is the user i am using for CAT has following roles:
/CCM/CATALOG_MANAGER
/CCM/CATALOG_SEARCH
SAP_BBP_STAL_ADMINISTRATOR
SAP_BBP_STAL_EMPLOYEE
SAP_BBP_STAL_MANAGER
SAP_EC_BBP_ADMINISTRATOR
SAP_EC_BBP_EMPLOYEE
SAP_EC_BBP_MANAGER
and profile of sap_all and sap_new.
in my home page all the buttons "upload,edit,publish,schema expo,delete, delete history,add to favoirites" are active (but there are no URLs attached in the properties of these respective buttons).
i had run /ccm/intialize_cme , restarted server , could find /ccm/master catalog in IMG-->fuzzy search,
but the same master cataog was not appearing on CAT home page.
when i check SLG1 i am getting the following message
"error when generating catalog /ccm/master_catalog " and also "error when creating a catalog"
can anybody pl. help??
if you require any further info i can send screen shots on personal ID !!
best regards,
Dinesh

Uploading of Master Schema in CCM 2.0 error

Hi All,
We are implementing CCM 2.0
SRM 5.0
TREX 7.0
My /CCM/INITIALIZE_CME ran sucessfully and gave the message "predefined datatype and characteristics were intialized".
When I tried to edit the Master catalog it says " No schema found for catalog /CCM/MASTER_CATALOG.
When I start with the basic step of uploading master schema and clic "upload" button in edit catalog,
and now when I press "upload" button to upload CSV file for master schema from my local machine , an error comes "Starting CSV import for catalog /CCM/MASTER_CATALOG Error in row 4 of the CSV file".
Pl. help.
Regards.
Angie.

Hi Angie,
If you have read that in the SLG1, please double-click in the line with the red ball. In the part below, you should see two icons, please click in the second icon (magnifyng glass icon) and there you can find more details.
If not you can send me the file uploaded by email
Regards
Jorge

Using BAPI to upload Equipment Master (IE01)

Hi,
Can any one help to do below object...that i need for resume.
Pls provide me compelete details with code or else give me guidelines in detail to carrayout.....
i should be thankful to you....
Using BAPI to upload Equipment Master (IE01). Fields that are uploaded are Equipment category, valid to date, Equip. Description, object type, Acquisition value, Acquisition date, Maintenance Plan, plan section, catalog profile. Input file is accessed from application server. Error log file is created at application server.
with regards
bheem

If this is a onetime load, you can use LSMW to do this.
Object 0400. Must easier than writing a report from scratch.
Albert

Empty schema in master catalog

Hi,
I just did the basic setup CCM 2.0 on WAS 7.0
Now I see the master catalog has no standard schema yet.
I read this willl be generated the first time it gets edited, but it is not.
Is this right, and do I have to build this schema on my own, or is there a initial upload available anywhere?
Regards, Toine.

HI,
As already identified by Masa you must create the schema yourself either directly in the catalog (not recommended) or use either XML or CSV uploads. Please see the help documentation for details on schema file creation:
http://help.sap.com/saphelp_ccm20/helpdata/en/index.htm
Also - I have attached a simple test csv file for you to load to your catalog to get you started.
Regards,
Jason

CCM - more schemas is master catalog

Hello CCM Gurus,
We're using CCM 2.0 version. We would like to make 2 schemas in our master catalog. When I tried, I succeed making it in a supplier catalog with uploading the structure in XML, but I couldn't manage it in case of master and purchasing catalog.
If you have any solution that help me, please send it to me!
Thanks and regards
Almos

Hello,
As I am aware this is not possible. There was talk that this will be available in CCM3.0 which is canceled in favour of MDM/CCM.
Gordan

Errror while uploading the supplier catalog data

Hi CCM gurus,
I am trying to upload a supplier catalog via csv file and got this error:
" Value for catalog item xxxxxxx (supplier part no.) of supplier xxxxxx is incorrect"
"Catalog update was terminated "
I tried to the change the values of /ccm/supplier_part_no but this error exists.
I even tried to remove this column and upload but it says there is an error in the fourth row of your csv file.
I am missing something in the supplier part no column.
My SLG1 shows the following error /CCM/CX_CONVERSION_FAILED
Any suggestions.
We are working with CCM 2.0 patch level 0001
SRM server 5.0, component version 4.0 and we have TREX installed in our system.
Reg.,
Sridhar.

Yes. Pl. find here, the XXXXXX place we have our catalog name,suppartno and all
Log Details: 00000000000000000669
Uploading catalog XXXXXXXX
Name of file that was uploaded: XXXXXXXXXXXXXXXXXXXXX
03.04.2007 15:48:43 (CET) X: Starting CSV import for catalog XXXXXXXXXX
03.04.2007 15:48:44 (CET) X: 0001 package(s) were processed OK
03.04.2007 15:48:43 (CET) X: Package 0001 received and saved
03.04.2007 15:48:53 (CET) X: processing of package 0001 started
03.04.2007 15:48:55 (CET) X: catalog header data updated
03.04.2007 15:49:06 (CET) X: 1 data types updated/created
03.04.2007 15:49:08 (CET) X: characteristics updated; 2 updated/created; 0 deleted
03.04.2007 15:49:09 (CET) X: categories updated; 3 updated/created; 0 deleted
03.04.2007 15:49:09 (CET) X: category relationships updated; 2 created; 0 deleted
03.04.2007 15:49:09 (CET) X: schemas updated; 1 updated/created; 0 deleted
03.04.2007 15:49:10 (CET) X: 1 schema(s) deleted after complete transmission
03.04.2007 15:49:10 (CET) X: update of catalog data started
03.04.2007 15:49:10: 0 catalog items have to be adjusted
03.04.2007 15:49:10 (CET) X: update of catalog data completed
03.04.2007 15:49:10 (CET) X: catalog model data updated
Value for catalog item XXXXXX (supplier part no.) of supplier XXXXXX is incorrect
Catalog update was terminated
Only the last two lines shows red and all others are green.
Reg.,
Sridhar.
Message was edited by:
P.T. Sridharbabu

Upload categories master catalog

Similar Messages

Maybe you are looking for