Uploading data in Measurement Point(PM)

hii all
i have a requirement to upload data in Measurement point (PM)
We can achieve this through IBIP please let me knw the procedure
Thanx and regards
Hitesh

Similar Messages

Accepting date as a measuring point

Please guide as to how does one accept date field as an input in measuring points.Have made a characteristic with date format,yet while creating a measuring point with the said characteristic , displays an error
" Only characteristics with a Numerical format can be used "
awaiting an early reply,

Hi pshthecoolest ,
You cant declare DATE with Date format as Characteristics , as per Std SAP.
Work around will be Create Char CT04 DATE , with Numeric format with Template (8), assign appropriate unit of Measurement , that you need to create separately t code CUNI.
But above all why you required to put reading as a Date in measuring point ?
Riyaj
Edited by: riyajmaner on Feb 8, 2011 12:51 PM

Measuring points check in IE01 / IE02

Dear all,
When user create or change an Equipment (IE01 / IE02) , the user should input field in Measuring points/counters.
Is there any Exits or BADIs for this transaction.
Thanks,
Ikrar

Hi,
Read the documentation of customer exit component EXIT_SAPMIEQ0_001.
In program SAPMIEQ0 (Equipment change), on click on save button:
1) In you customer exit, read data from measuring points program, i.e. check LIMR0TOP include of function group IMR0 to identify the internal table / structures that contain the data for measuring points in program SAPLIMR0 screen 4110. This way you would come to know if the user has entered data for measuring points. If not, error out.
you can use the syntax using field symbols to read data from other program:
Sample code (not related to measuring point program.
DATA : var1 TYPE char25 VALUE '(SAPLIMSP)ISSM[]'.
DATA : var2 TYPE char25 VALUE '(SAPLIMSP)SCRGNTAB[]'.
FIELD-SYMBOLS: <fs_issm> TYPE ANY TABLE,
<fs_grtab> TYPE ANY TABLE.
ASSIGN (var1) TO <fs_issm>.
ASSIGN (var2) TO <fs_grtab>.
Best Regards,
Shyam
Edited by: Shyam Khemani on Jun 15, 2011 11:58 AM

Measuring Points extraction

Hi all,
Im trying to use the PM_MEASUREMENT DataSource. It works pretty well with Measuring Points linked to Functional location. However, I have some Measuring Points that are linked to Equipments and those Equipments have no connection to Functional Location. For these Measuring Points no data is being extracted at all.
Is there any restriction with the DataSource PM_MEASUREMENT that makes it only to extract data for Measuring Points linked to Functional Location?
If not, does any of you have any idea about what is going on here?
Thank you very much,
Claudiomar

Thanks for your replies.
Saurabh: High volumes of serialized products are produced that are serviceable under warranty.
We are creating Serial Numbers for each model of the Product. We can attach Master Warranty and capture Warranty period for each Serial Number. But for creating Measuring Point / Counters, I have to generate an "Equipment Number" (via the Equipment View) for each Serial Number. If it is possible to do the same without creating Eqpt Num it will help.
Pete: I checked that link you had shown. But in T Code IQ01, I find Serial Number is not figuring in the list "Measuring Point Object (Obj.Categ. in Gen.Status Management)" and there is no IMG set up for this.
Request clarifications pls.
Thanks.
Raj

Measuring Point BDC error

Hi,
When I am uploading data for IK01(Create Measuring Point), Lower Range limit value in additinal data is always showing zero. During uploading(with processing mode A),whatever data given in flat file it's showing on the screen. But after saving and checking in IK02 the Lower Range limit value in additinal data is showing 0. Please help in resolving this issue.
data: begin of record occurs 0,
data element: IMRC_MPOTY
        MPOTY_001(003),
data element: IMRC_MPTYP
        MPTYP_002(001),
data element: EQUNR
        EQUNR_003(018),
data element: IMRC_PSORT
        PSORT_004(020),
data element: IMRC_PTTXT
        PTTXT_005(040),
data element: ATNAM
        ATNAM_006(030),
data element: IMRC_DESIC
data element: IMRC_DECIM
        DECIM_011(002),
        DESIC_007(022),
data element: IMRC_PSORT
       PSORT_008(020),
data element: IMRC_PTTXT
       PTTXT_009(040),
data element: ATNAM
       ATNAM_010(030),
data element: IMRC_DECIM
       DECIM_011(002),
data element: IMRC_DESIC
       DESIC_012(022),
data element: IMRC_MRMAC
        MRMAC_013(022),
data element: IMRC_MRMIC
        MRMIC_014(022),
data element: IMRC_UNITM
        UNITM_015(006),
data element: IMRC_PSORT
       PSORT_016(020),
data element: IMRC_PTTXT
       PTTXT_017(040),
data element: ATNAM
       ATNAM_018(030),
data element: IMRC_DECIM
       DECIM_019(002),
data element: IMRC_DESIC
       DESIC_020(022),
      end of record.
LOOP AT RECORD.
perform bdc_dynpro      using 'SAPLIMR0' '1110'.
perform bdc_field       using 'BDC_CURSOR'
                              'IMPT-MPTYP'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RIMR0-MPOTY'
                              record-MPOTY_001.
perform bdc_field       using 'IMPT-MPTYP'
                              record-MPTYP_002.
perform bdc_field       using 'EQUI-EQUNR'
                              record-EQUNR_003.
perform bdc_dynpro      using 'SAPLIMR0' '5110'.
perform bdc_field       using 'BDC_CURSOR'
                              'IMPT-ATNAM'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'IMPT-PSORT'
                              record-PSORT_004.
perform bdc_field       using 'IMPT-PTTXT'
                              record-PTTXT_005.
perform bdc_field       using 'IMPT-ATNAM'
                              record-ATNAM_006.
perform bdc_field       using 'RIMR0-DESIC'
                              record-DESIC_007.
perform bdc_dynpro      using 'SAPLIMR0' '5110'.
perform bdc_field       using 'BDC_CURSOR'
                              'RIMR0-DESIC'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ADPT'.
perform bdc_field       using 'IMPT-PSORT'
                              record-PSORT_004.
perform bdc_field       using 'IMPT-PTTXT'
                              record-PTTXT_005.
perform bdc_field       using 'IMPT-ATNAM'
                              record-ATNAM_006.
perform bdc_field       using 'IMPT-DECIM'
                              record-DECIM_011.
perform bdc_field       using 'RIMR0-DESIC'
                              record-DESIC_007.
perform bdc_dynpro      using 'SAPLIMR0' '6110'.
perform bdc_field       using 'BDC_CURSOR'
                              'RIMR0-MRMIC'.
perform bdc_field       using 'BDC_OKCODE'
                               '=BU'."'=NEXT'.
perform bdc_field       using 'RIMR0-MRMAC'
                              record-MRMAC_013.
perform bdc_field       using 'RIMR0-MRMIC'
                              record-MRMIC_014.
perform bdc_field       using 'RIMR0-UNITM'
                              record-UNITM_015.
perform bdc_dynpro      using 'SAPLIMR0' '5110'.
perform bdc_field       using 'BDC_CURSOR'
                              'IMPT-PSORT'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
perform bdc_field       using 'IMPT-PSORT'
                              record-PSORT_004.
perform bdc_field       using 'IMPT-PTTXT'
                              record-PTTXT_005.
perform bdc_field       using 'IMPT-ATNAM'
                              record-ATNAM_006.
perform bdc_field       using 'IMPT-DECIM'
                              record-DECIM_011.
perform bdc_field       using 'RIMR0-DESIC'
                              record-DESIC_007.
perform bdc_transaction using 'IK01'.
endloop.
Thanks
K Srinivas

Do the recording again for the data you have, and see whether the data is being written again after some screen navigation (i.e lower range values written again ) in the recording .
Check whether any navigation takes place from the point you write data to another place and you return back to the same place ,if that is the case you need to write the data again

Upload data from excel to Ztable with statistics

Hi,
I have a requirement to upload data from excel sheet to ztable .
Here i need tp provide the user with the execution statistics like
1.Number of records read from the Excel spread-sheet
2. Number records processed successfully
3. Number records with Error
4. Name and location of Error Log-file (text-file format)
5. Name and location of the file containing error records (Excel spread-sheet format)
I would appreciate if any of you have code written for the same

See the below example code to upload from xl file to sap
REPORT ZLWMI151_UPLOAD no standard page heading
 line-size 100 line-count 60.
*tables : zbatch_cross_ref.
data : begin of t_text occurs 0,
 werks(4) type c,
 cmatnr(15) type c,
 srlno(12) type n,
 matnr(7) type n,
 charg(10) type n,
 end of t_text.
data: begin of t_zbatch occurs 0,
 werks like zbatch_cross_ref-werks,
 cmatnr like zbatch_cross_ref-cmatnr,
 srlno like zbatch_cross_ref-srlno,
 matnr like zbatch_cross_ref-matnr,
 charg like zbatch_cross_ref-charg,
 end of t_zbatch.
data : g_repid like sy-repid,
 g_line like sy-index,
 g_line1 like sy-index,
 $v_start_col type i value '1',
 $v_start_row type i value '2',
 $v_end_col type i value '256',
 $v_end_row type i value '65536',
 gd_currentrow type i.
data: itab like alsmex_tabline occurs 0 with header line.
data : t_final like zbatch_cross_ref occurs 0 with header line.
selection-screen : begin of block blk with frame title text.
parameters : p_file like rlgrap-filename obligatory.
selection-screen : end of block blk.
initialization.
g_repid = sy-repid.
at selection-screen on value-request for p_file.
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 PROGRAM_NAME = g_repid
 IMPORTING
 FILE_NAME = p_file.
start-of-selection.
Uploading the data into Internal Table
perform upload_data.
perform modify_table.
top-of-page.
CALL FUNCTION 'Z_HEADER'
EXPORTING
 FLEX_TEXT1 =
 FLEX_TEXT2 =
 FLEX_TEXT3 =
*& Form upload_data
 text
FORM upload_data.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 FILENAME = p_file
 I_BEGIN_COL = $v_start_col
 I_BEGIN_ROW = $v_start_row
 I_END_COL = $v_end_col
 I_END_ROW = $v_end_row
 TABLES
 INTERN = itab
 EXCEPTIONS
 INCONSISTENT_PARAMETERS = 1
 UPLOAD_OLE = 2
 OTHERS = 3.
IF SY-SUBRC <> 0.
 write:/10 'File '.
ENDIF.
if sy-subrc eq 0.
 read table itab index 1.
 gd_currentrow = itab-row.
 loop at itab.
 if itab-row ne gd_currentrow.
 append t_text.
 clear t_text.
 gd_currentrow = itab-row.
 endif.
 case itab-col.
 when '0001'.
 t_text-werks = itab-value.
 when '0002'.
 t_text-cmatnr = itab-value.
 when '0003'.
 t_text-srlno = itab-value.
 when '0004'.
 t_text-matnr = itab-value.
 when '0005'.
 t_text-charg = itab-value.
 endcase.
 endloop.
endif.
append t_text.
ENDFORM. " upload_data
*& Form modify_table
 Modify the table ZBATCH_CROSS_REF
FORM modify_table.
loop at t_text.
 t_final-werks = t_text-werks.
 t_final-cmatnr = t_text-cmatnr.
 t_final-srlno = t_text-srlno.
 t_final-matnr = t_text-matnr.
 t_final-charg = t_text-charg.
 t_final-erdat = sy-datum.
 t_final-erzet = sy-uzeit.
 t_final-ernam = sy-uname.
 t_final-rstat = 'U'.
 append t_final.
 clear t_final.
endloop.
delete t_final where werks = ''.
describe table t_final lines g_line.
sort t_final by werks cmatnr srlno.
Deleting the Duplicate Records
perform select_data.
describe table t_final lines g_line1.
modify zbatch_cross_ref from table t_final.
if sy-subrc ne 0.
 write:/ 'Updation failed'.
else.
 Skip 1.
 Write:/12 'Updation has been Completed Sucessfully'.
 skip 1.
 Write:/12 'Records in file ',42 g_line .
 write:/12 'Updated records in Table',42 g_line1.
endif.
delete from zbatch_cross_ref where werks = ''.
ENDFORM. " modify_table
*& Form select_data
 Deleting the duplicate records
FORM select_data.
select werks
 cmatnr
 srlno from zbatch_cross_ref
 into table t_zbatch for all entries in t_final
 where werks = t_final-werks
 and cmatnr = t_final-cmatnr
 and srlno = t_final-srlno.
sort t_zbatch by werks cmatnr srlno.
loop at t_zbatch.
 read table t_final with key werks = t_zbatch-werks
 cmatnr = t_zbatch-cmatnr
 srlno = t_zbatch-srlno.
 if sy-subrc eq 0.
 delete table t_final .
 endif.
 clear: t_zbatch,
 t_final.
endloop.
ENDFORM. " select_data
Reward Points if it is helpful
Thanks
Seshu

Upload data from Excel to Sap-Crm

Hi All,
I need to upload data from EXCEL to SAP-CRM system.The problem is in crm there is no ALSM_EXCEL_INTO_INTERNAL_TABLE or corresponding function modules exist.Using GUI_UPLOAD I can upload data from excel to CRM but the main problem with this is it supports only 255 chars for entire line, in my excel file it contains more than 255 chars.Please help me out.

Try the following :
Class: CL_GUI_FRONTEND_SERVICES
Method: GUI_UPLOAD
Thanks
Allot points if this helps!

Upload data from excel to crm using BDOC possible or not

Hi all,
I need to upload data from excel to crm(opportunity management) .is it possible using bdoc or not. Please provide the list of methods to upload data from EXCEL and also provide the best method for this scenario .

BDocs are used to transfer data from one SAP system to another like from CRM to ECC or R3.
If u want to upload data from excel to CRM, this can be done with the help of idocs and not bdocs (method 1 - using LSMW).
Take help of a crm technical consultant and define lsmw projects. The project will take care of field mapping and conversion. Once that is done, 4 steps need to be done.
1. Read data
2. Convert data
3. Generate idocs
4. Post idocs
Once the posting of idocs happen error-free, the data will be available in crm system.
Another method will be using transaction SECATT.
Here u can define test scripts and record what all activities are done in a transaction. Then define ur test configs which will contain the excel sheet data and then upload the data.
Reward with points if this helps.

Upload data from excel file to mii without UDS and PCo

Hi Experts,
I am trying to upload data from excel file to mii db without using UDS and PCo. Is there any other ways that we can achieve it.
I am thinking one solution , writing stored procedure. any other solutions?
Thanks in advance,
Eswar.

Hi,
Thanks for reply.
I tried to create OLEDB data server which will point to my excel file in D drive.Its created successfully and i tried to query the datasource using sql query, I am not getting any modes in sql query template.
can u provide some steps..how to access this file.
Thanks, Eswar

HOW TO UPLOAD DATA FROM EXCEL TO INTERNALTABLE

HI,
HOW TO UPLOAD DATA FROM EXCEL TO INTERNALTABLE? & WITH EXAMPLE.

hi,
chk this, put the data into an excel file.
fields inside it are name and age.
sample excel sheet.
coloumn 1 is name and column 2 is age
name age
A 8
C 13
D 55
DATA : int_excel LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
data : record like db_name_age occurs 0 with header line.
DATA : v_start_col TYPE i VALUE '1', "starting col
 v_start_row TYPE i VALUE '1', " starting row
 v_end_col TYPE i VALUE '2', " total columns
 v_end_row TYPE i VALUE '10'. "total no of record
FORM f_upload .
CLEAR : int_excel, int_excel[].
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 filename = wf_filename
 i_begin_col = v_start_col
 i_begin_row = v_start_row
 i_end_col = v_end_col
 i_end_row = v_end_row
 TABLES
 intern = int_excel
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
IF sy-subrc <> 0.
*Message is 'Unable to upload data from ' wf_filename.
 MESSAGE e169(zm050) WITH wf_filename.
ELSE.
 SORT int_excel BY row col.
 REFRESH : record.
 CLEAR : record.
 LOOP AT int_excel.
 CASE int_excel-col. "go thru each column.
 WHEN 1.
 record-name = int_excel-value.
 WHEN 2.
 record-age = int_excel-value.
 ENDCASE.
 AT END OF row.
 APPEND record.
 CLEAR record.
 ENDAT.
 ENDLOOP.
*inserting into table
modfiy db_name_age from table record.
ENDIF.
ANOTHER EXAMPLE
TYPE-POOLS truxs.
types: begin of t_tab,
col1(5) type c,
col2(5) type c,
col3(5) type c,
end of t_tab.
data : itab type standard table of t_tab,
 wa type t_tab.
data it_type type truxs_t_text_data.
parameter p_file type rlgrap-filename.
data ttab type tabname.
at selection-screen on value-request for p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = p_file
start-of-selection.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
I_LINE_HEADER = 'X'
i_tab_raw_data = it_type
i_filename = p_file
tables
i_tab_converted_data = itab[]
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
end-of-selection.
loop at itab into wa.
write : wa-col1,
 wa-col2,
 wa-col3.
endloop.
rgds,
anver
if hlped pls mark points

Uploading data from flat file to table control

HI All,
I want to upload data to OVKK tcode using BDC. For this I wrote Z program as shown below:
REPORT ZSD_BDC_OVKK_UPLOAD
       NO STANDARD PAGE HEADING LINE-SIZE 255.
*INCLUDE bdcrecx1.
DATA : BEGIN OF T_DUMMY OCCURS 0,
       VAR(100) TYPE C,
       END OF T_DUMMY.
DATA: BEGIN OF ITAB OCCURS 0,
       KALSM(10) TYPE C,
*       KARTV(10) TYPE C,
       VKORG(4) TYPE C,
       VTWEG(2) TYPE C,
       SPART(2) TYPE C,
       KALVG(1) TYPE C,
       KALKS(1) TYPE C,
         KALSM(6) TYPE C,
         KARTV(4) TYPE C,
       END OF ITAB.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
       IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : v_filename TYPE string.
PARAMETER : filename LIKE rlgrap-filename OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      field_name = filename
    CHANGING
      file_name = filename.
START-OF-SELECTION.
v_filename = filename.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                      = v_filename
      filetype                      = 'ASC'
     has_field_separator           = 'X'
    TABLES
      data_tab                      = T_DUMMY.
LOOP AT T_DUMMY.
    ITAB-VKORG = T_DUMMY-VAR+0(4).
    ITAB-VTWEG = T_DUMMY-VAR+5(2).
    ITAB-SPART = T_DUMMY-VAR+8(2).
    ITAB-KALVG = T_DUMMY-VAR+11(1).
    ITAB-KALKS = T_DUMMY-VAR+13(1).
    ITAB-KALSM = T_DUMMY-VAR+15(6).
    ITAB-KARTV = T_DUMMY-VAR+22(4).
    APPEND ITAB.
ENDLOOP.
DATA: FNAM(20) TYPE C,
      IDX      TYPE C.
    MOVE 1 TO IDX.
LOOP AT ITAB.
REFRESH IT_BDCDATA.
    PERFORM bdc_dynpro      USING 'SAPML080Z' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'V_T683V-KALSM(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=NEWL'.
    PERFORM bdc_dynpro      USING 'SAPML080Z' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'V_T683V-VKORG(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SAVE'.
    CONCATENATE 'V_T683V-KALSM(' IDX ')' INTO FNAM.
     PERFORM bdc_field       USING FNAM
                                   itab-kalsm.
    CONCATENATE 'V_T683V-KARTV(' IDX ')' INTO FNAM.
     PERFORM bdc_field       USING FNAM
                                   itab-kartv.
    CONCATENATE 'V_T683V-VKORG(' IDX ')' INTO FNAM.
     PERFORM bdc_field       USING FNAM
                                   itab-vkorg.
    CONCATENATE 'V_T683V-VTWEG(' IDX ')' INTO FNAM.
     PERFORM bdc_field       USING FNAM
                                   itab-vtweg.
    CONCATENATE 'V_T683V-SPART(' IDX ')' INTO FNAM.
     PERFORM bdc_field       USING FNAM
                                   itab-spart.
    CONCATENATE 'V_T683V-KALVG(' IDX ')' INTO FNAM.
     PERFORM bdc_field       USING FNAM
                                   itab-kalvg.
    CONCATENATE 'V_T683V-KALKS(' IDX ')' INTO FNAM.
     PERFORM bdc_field       USING FNAM
                                   itab-kalks.
PERFORM bdc_dynpro      USING 'SAPLSTRD' '0300'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'KO008-TRKORR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=LOCK'.
   PERFORM bdc_field       USING 'KO008-TRKORR'
                                   'D47K919377'.
   PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'V_T683V-VKORG(01)'.
   PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
   PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'V_T683V-VKORG(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                   '=SAVE'.
CALL TRANSACTION 'OVKK' USING IT_BDCDATA
                        MODE 'A'
                       UPDATE 'S'
                     MESSAGES INTO IT_BDCMSGCOLL.
IDX = IDX + 1 .
endloop.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
I checked in debugging mode and found that data is passed to internal table but its not uploading data to OVKK, there no data is displayed.
Please tell me solution for this.....
regards,
ravindra.

Hi,
Look at the following link you will find some good example of Table control.
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Here you need to take care to which line of table control you are populating the data.
Make sure to take care of page down in table control.
*********Try Call Transaction in MODE 'N'.
Check your OK_CODE once again.
Try to give BACk also after saving.
The Table control is mainly used to update no.of line items at one shot. No need to come BACK for each and every record.
Try to do recording in SHDB once again and see the changes closely.
Thanks.
If this helps you reward with points.
Message was edited by: KDeepak
Message was edited by: KDeepak

Measuring Point Status.

Dear All Consultants,
I have scenario for warranty services, so I define master warranty with to conditions years - kilometer reading.
The problem is while assigning master warranty to equipment master system gives me this error {could not determine the status for measuring point 000000000212 at date 11.06.2007
Message no. BG212 }
Why this message appears and how to solve it.
It is only warning message but it assume that the warranty expired.
Waiting your kindly replay.
yasser.

Hi,
Please refer the link below
http://help.sap.com/saphelp_46c/helpdata/en/5a/3efb377409bd5ae10000009b38f889/frameset.htm
as you might have not defined first counter.
Enjoy SAP
Dont forget to give points if its useful ans.
Namskar
Ketan Dave

FM for uploading data into internal table from Excel sheet

Hi,
I have a slight problem in one of the function modules that I have created. Actually it has been copied from a standard SAP function module KCD_EXCEL_OLE_TO_INT_CONVERT. Now my created function module is throwing me a dump suggesting Data objects in a Unicode program are not convertible. Can anybody help me out in removing the error .
Actually the need of copying the standard FM to a ZFM is to increase the length of the column which can be uploaded thru this FM. The standard FM has a restriction of being able to upload 32 characters whereas my requirement is to upload data having at least 150 characters. So in order to care the need I made a ZStructure ZAKHIL_CELLS taking the Value parameters as 150 characters instead of 32 characters.
Well this is all done because I wanted to upload a excel sheet into an internal table and not use a tab delimited file. Can anybody help in this regard or suggest some other function module which can upload more than 150 characters from a excel sheet .
m also attaching structure of my ZStructure for ur reference .
STRUCTURE ZAKHIL_CELLS1 .
ROW KCD_EX_ROW_N NUMC 4 Flexible Excel upload: row number
COL KCD_EX_COL_N NUMC 4 Column
VALUE KCD_VALUE CHAR 150 External Data Transfer: Values of Parameters or Variables
Thanks & Rgds,
Akhil

hi,
sample excel sheet.
coloumn 1 is name and column 2 is age
name age
A 8
C 13
D 55
DATA : int_excel LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
data : record like db_name_age occurs 0 with header line.
DATA : v_start_col TYPE i VALUE '1', "starting col
 v_start_row TYPE i VALUE '1', " starting row
 v_end_col TYPE i VALUE '2', " total columns
 v_end_row TYPE i VALUE '10'. "total no of record
FORM f_upload .
CLEAR : int_excel, int_excel[].
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 filename = wf_filename
 i_begin_col = v_start_col
 i_begin_row = v_start_row
 i_end_col = v_end_col
 i_end_row = v_end_row
 TABLES
 intern = int_excel
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
IF sy-subrc <> 0.
*Message is 'Unable to upload data from ' wf_filename.
 MESSAGE e169(zm050) WITH wf_filename.
ELSE.
 SORT int_excel BY row col.
 REFRESH : record.
 CLEAR : record.
 LOOP AT int_excel.
 CASE int_excel-col. "go thru each column.
 WHEN 1.
 record-name = int_excel-value.
 WHEN 2.
 record-age = int_excel-value.
 ENDCASE.
 AT END OF row.
 APPEND record.
 CLEAR record.
 ENDAT.
 ENDLOOP.
*inserting into table
ENDIF.
if this helped pld rewrd points,
rgrds
anver

How to upload datas in excel sheet through BDC

Hi,
 I know how to upload datas in Text format through BDC...Suppose even when datas are in .xls format,I saved that file as Text(tab delimited) format...then file become text format and it can be easily uploaded....
 So, I want to know How to upload datas in excel sheet through BDC

hi,
try this Example, hope useful to u, assign me point.
report ZMSV1_BDC_CALL
 no standard page heading line-size 255.
*include bdcrecx1.
*parameters: dataset(132) lower case.
 DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
 '* data element: ' followed with the data element
 which describes the field.
 If you don't have a data element use the
 comment without a data element name
3.) The second line shows the fieldname of the
 structure, the fieldname must consist of
 a fieldname and optional the character '_' and
 three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record,
data element: BUKRS
 BUKRS_001(004),
data element: KTOKK
 KTOKK_002(004),
data element: NAME1_GP
 NAME1_003(035),
data element: SORTL
 SORTL_004(010),
data element: ORT01_GP
 ORT01_005(035),
data element: LAND1_GP
 LAND1_006(003),
data element: SPRAS
 SPRAS_007(002),
data element: BANKS
 BANKS_01_008(003),
data element: BANKK
 BANKL_01_009(015),
data element: BANKN
 BANKN_01_010(018),
 end of record.
End generated data section ***
data: itab like record occurs 0 .
data: it_bdc type bdcdata occurs 0 with header line.
data: it_msg type bdcmsgcoll occurs 0 with header line.
parameter p_file type rlgrap-filename default 'c:\vendor.txt' obligatory
start-of-selection.
perform open_dataset using p_file.
perform open_group.
*perform close_group.
*perform close_dataset using dataset.
*& Form open_dataset
 text
 -->P_P_FILE text
form open_dataset using p_p_file.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = p_file
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
 data_tab = itab
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " open_dataset
*& Form open_group
 text
--> p1 text
<-- p2 text
form open_group .
loop at itab into record.
perform bdc_dynpro using 'SAPMF02K' '0105'.
perform bdc_field using 'BDC_CURSOR'
 'RF02K-KTOKK'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'RF02K-BUKRS'
 record-BUKRS_001.
perform bdc_field using 'RF02K-KTOKK'
 record-KTOKK_002.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'LFA1-ORT01'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'LFA1-NAME1'
 record-NAME1_003.
perform bdc_field using 'LFA1-SORTL'
 record-SORTL_004.
perform bdc_field using 'LFA1-ORT01'
 record-ORT01_005.
perform bdc_field using 'LFA1-LAND1'
 record-LAND1_006.
perform bdc_field using 'LFA1-SPRAS'
 record-SPRAS_007.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
 'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
 'LFBK-KOINH(01)'.
perform bdc_field using 'BDC_OKCODE'
 '=ENTR'.
perform bdc_field using 'LFBK-BANKS(01)'
 record-BANKS_01_008.
perform bdc_field using 'LFBK-BANKL(01)'
 record-BANKL_01_009.
perform bdc_field using 'LFBK-BANKN(01)'
 record-BANKN_01_010.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
 'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
 '=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
 'LFB1-AKONT'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
 'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
 'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
 '=YES'.
call transaction 'FK01' using it_bdc mode 'A' update 'S'
 messages into it_msg.
write:/ sy-subrc.
 perform message_formatwrite.
refresh it_bdc.
clear it_bdc.
endloop.
endform. " open_group
*& Form message_formatwrite
 text
--> p1 text
<-- p2 text
form message_formatwrite .
data:l_msg(10).
loop at it_msg.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
 ID = SY-MSGID
 LANG = sy-langu
 NO = SY-MSGNO
 V1 = SY-MSGV1
 V2 = SY-MSGV2
 V3 = SY-MSGV3
 V4 = SY-MSGV4
IMPORTING
 MSG = l_msg
EXCEPTIONS
 NOT_FOUND = 1
 OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endloop.
endform. " message_formatwrite
*& Form bdc_dynpro
 text
 -->P_0112 text
 -->P_0113 text
form bdc_dynpro using value(p_0112)
 value(p_0113).
it_bdc-program = p_0112.
it_bdc-dynpro = p_0113.
it_bdc-dynbegin = 'X'.
append it_bdc.
clear it_bdc.
endform. " bdc_dynpro
*& Form bdc_field
 text
 -->P_0117 text
 -->P_0118 text
form bdc_field using value(p_0117)
 value(p_0118).
it_bdc-fnam = p_0117.
it_bdc-fval = p_0118.
append it_bdc.
clear it_bdc.
endform. " bdc_field
Regards
fareedas

How to upload data

Dear Hussien,
I have the customer master list . now i want to upload, can u please guide me how to achieve this?
There is two tables
1. hz_parties
2. hz_cust_accounts_all
Can anyone guide me how to upload data in the telesales module ?
i know throught sqlldr it is possible but there many fields which i don't know about in the tables so any help pls
Edited by: Mohammed Taj on May 7, 2009 1:15 PM

Hi Mohammed, I would recommend that before looking to interface data to Oracle Apps or anything to do with the app really that you always check the user guides/ manuals first as they are often a good starting point. For customers check the AR guide. This is found at:
http://www.oracle.com/technology/documentation/applications.html
Select your version of OA and then view the AR user guide.
There is a section that explains how customers are managed in OA, the program Customer Interface which can be used to interface customers into OA and towards the end of the guide there is a description of the interface tables which you will need to populate with your customer source data.
Regards Cel

Uploading data in Measurement Point(PM)

Similar Messages

Maybe you are looking for