UPS and Leopard
I have bought an Atlantis Land UPS Host Power 1501 and i have connected it to my aluminium iMac through an usb port. The sw that Atlantis Land give with the UPS isn't compatible with MACOS X.
Is Leopard capable of controlling an UPS without any sw? I found in internet some picture of an option panel for UPS in "energy saver" option but i don't have it. Have i to configure something?
Someone can help me?
Tnx and sorry for my poor english
If it isn't showing up automatically in the Energy Saver preference pane it probably doesn't follow a standard connection scheme and isn't compatible with the Mac OS.
Similar Messages
-
I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues. -
HP Pavilion Elite e91804 experiencing lock-ups and crashing after LWSEP
1. Product name and number: HP Pavilion Elite e91804
2. Operating system: Windows 7 64 bit
3. No error message (other than blue screen)
4. My most recent change was sending my computer in for the Limited Warranty Service Enhancement Program, and receiving a new motherboard.
Before I sent my computer in for the LWSEP I was experiencing lock-ups and crashes only when I was multi-tasking (playing video games, listening to music, and having tabs open in firefox).
So I sent my computer in for the LWSEP to receive a new motherboard to fix these crashes, however after receiving my computer from them, the lock-ups and crashing have not been fixed and, in fact, have gotten worse. My computer will now lock-up and crash whenever I attempt to stream anything, be that music, video, etc. I can still occasionally play video games, assuming that I am doing nothing else, and that my computer cooperates with me (not locking up), but this only happens about 1/3 of the time.
My main confusion is that sending my computer in was supposed to fix my problem, not make it worse. Any help would be greatly appreciated.1. Product name and number: HP Pavilion Elite e91804
2. Operating system: Windows 7 64 bit
3. No error message (other than blue screen)
4. My most recent change was sending my computer in for the Limited Warranty Service Enhancement Program, and receiving a new motherboard.
Before I sent my computer in for the LWSEP I was experiencing lock-ups and crashes only when I was multi-tasking (playing video games, listening to music, and having tabs open in firefox).
So I sent my computer in for the LWSEP to receive a new motherboard to fix these crashes, however after receiving my computer from them, the lock-ups and crashing have not been fixed and, in fact, have gotten worse. My computer will now lock-up and crash whenever I attempt to stream anything, be that music, video, etc. I can still occasionally play video games, assuming that I am doing nothing else, and that my computer cooperates with me (not locking up), but this only happens about 1/3 of the time.
My main confusion is that sending my computer in was supposed to fix my problem, not make it worse. Any help would be greatly appreciated. -
Out of curiosity, what happens if only one of the two power supplies is kept on UPS and the power goes out?
What do you think will happen?
The power supply connected directly to the main power will go offline.
The power supply connected to the UPS will stay up (as will your RAID).
Your UPS will start to drain.
Ultimately, if the power stays off long enough, the UPS will be unable to sustain sufficient voltage and the second power supply will go offline, bringing down your RAID.
Is that what you mean?
Note that the XServe RAID can have a fairly significant power draw. You need to make sure your UPS is sized sufficiently for your expected runtime. -
IMac (Late 2006) Stalls with EFI 1.2 and Leopard
A few days ago, I installed both the iMac 1.2 EFI Firmware update and Leopard on my late 2006 20" iMac. Since then, I've seen random momentary stalls throughout the system.
It sometimes happens while scrolling a web page, displaying a sheet, opening a stack, browsing CoverFlow, and so on. I don't know how to intentionally recreate it, it just seems to happen. It often (always?) seems to coincide with some disk activity.
I don't remember this behavior on the same hardware in the past, so either it's something with the firmware update or Leopard. Has anyone seen anything else like this?
Thanks in advance.Some people reported various bugs after installing the firmware update. Shutting it off and turning it back was all that was needed to fix the bugs.
-
Pop-ups and new tabs opening when I try to browse
Hello
I'm having trouble with pop-ups and new tabs for 'Mackeeper' among others, launching themselves in Safari on my MacBook Air. This has only just started after having the laptop for 3 months.
Operating system: OS X 10.9.4 (13E28)
Speed: 1.4 GHz Intel Core i5
Storage capacity: 4 GB 1600 MHz DDR3
I have tried troubleshooting by looking in 'Extensions' but there's nothing to remove. I've also tried Forum Member Linc Davis' advice, but unfortunately that's not working either.
I've tried all of the suggestions below, but nothing's working. It is driving me bonkers, so if anyone can help I would be most grateful.
Thank you
Jess
Linc DavisJul 10, 2014 8:22 AM Re: ANNOYING MACKEEPER TABS AND POPUP ADS
Re: ANNOYING MACKEEPER TABS AND POPUP ADSin response to chickashnaz
You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(122872) -
Has anyone tried using Endnote X1 and Leopard? I can't open any files ("the document blabla couldn't be opened"), nor can I create a new library ("Failed to create library").
Anyone any ideas if this is fixable?Fixed the problem. Originally I had no problems keeping the Endnote files wherever I liked, however it now only works with the Endnote files in Users/Library. A bit weird, but I can live with it.
-
I don't get this clipboard thing! I have created two files, one for the MS with mark-ups, and one for the unmarred version, each living in their own spot in my "house." It seems to be merging the two versions and I have to go in and re-paste and then it always says "you have placed a large amount of text on clipboard do you want to be able to access this?" and it prompts me to say no but I am afraid I'll lose my day's work so I just tap cancel. I highlight the day's revision and select "copy" to paste into the unmarked doc. before I save on the marked up or working doc. It is when I try to close that one that the clipboard issue pops up. What can you tell be about saving doc. in two places and how to NOT get it on clipboard? Thanks! I am not super computer savvy so layperson's language much appreciated!
Are you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert -
Is there a way to transfer or copy all my apps to another iPad with a different account? I was required in my job to use the one at work, but I would like to also see my current set ups and apps as in my personal one. Thank you so much!
What I suggest is that you try to pair your apple ID with you company ipad and see if it works.
Here is why::
I believe that the Apple rules let you. They are something like:
-- for a shared iDevice, you may put the app on one device
-- for a device you use exclisively, you may put the app on five (or some number) of iDevices
I'm not lawyer, so how you interpred this is a question.
Now, you need to figure out how to do this.
In the past at least, apple used this terminalogy.
Personal
Institution
Layered. combines personal & institution.
It depends on how your company has configured the iPad.
I have read where you can have upto three apple id per device. -
how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space. -
Can I run Tiger and Leopard on the same computer
Hi folks.
I've been meaning to install Leopard for ages but have never got round to it (I bought the retail box when it first came out). I have upgraded my RAM to 2GB and my hard drive to 320GB with no problems.
My upgraded hard drive has been partitioned into 2 equal parts of 160GB. These appear on desktop as Mackintosh HD1 and HD2. HD1 is the disk with all my files, music, OS etc and HD2 is empty
I have 2 bootable clones of my present system - one is on a 160GB external and the other is the original 80GB HD that I replaced.
My question is this - can I install Leopard on to my 160GB external HD, then clone it on to the empty HD2. If I do this would I be able to run both Tiger and Leopard on the same Macbook?
Is there any problems with this plan? Would I be able to transfer between the 2 OS and how do I install Leopard on the external drive. Is it just a case of inserting the Leopard DVD and choose the external drive as the target?
As usual thanks in advance
Del# Original Tiger in the internal HD, New Leopard in the external HD.
# New Leopard in the internal, Legacy cloned Tiger in the external.
# Split internal, one partition with Tiger, another with Leopard.
Leopard is backwardly compatible with older Macs, just make sure yours fulfills the minimum system requirements, both use the same filesystem format, so each can see the other. You can't run both at the same time, unless you purchase the server version of Leopard and run it virtualized. 99.9% of Firewire external HD's are bootable, some USB's are bootable but have to test first. You can choose which system to boot from by pressing the Option key at boot time, before the chime. Just make sure the external HDD is plugged in and turned on if that's where you want to boot from.
When I migrated my PBG4 from Panther to Tiger, got an external FW HDD, cloned Panther onto it, upgraded using Archive and Install, cleaned up, customized and tested it. When I was satisfied all was ok, cloned the original Panther onto another partition of the external HDD, wiped and tested for failure the internal HDD, then cloned the known good and tested Tiger into it. Only thing that died along the way was my old and ancient Photoshop v2.x, that refused to run on Tiger. -
1st generation MacBook, battery and Leopard issues; looking for help please
I have a 1st generation MacBook that started having battery problems immediately after installing Leopard. it was the same issue many others have complained about; battery life shortened and shutting down while on battery power with no warning. I have never had that problem while using Tiger. I experienced this with both 10.5.0 and the stand alone upgrade of 10.5.1 using an erase and install method.
(BTW, as a side note: I'm religious about calibrating my battery every month and use a program called "CoconutBattery" to document the results. Prior to Leopard, the battery measured 97-99% capacity. Three days after Leopard was installed it was time for another check, the result was 74% capacity.)
I had a clone backup of Tiger and immediately restored my MacBook, but the problem followed Tiger. I have Applecare and called support. Both myself and the tech found it rather hard to believe that the battery just suddenly failed coincidentally after the Leopard install. We went through the regular things; SMC reset, firmware checks, diagnostics, repair permissions, etc.
We believe it has to do with the Battery Updater package. I had gone between both versions of 1.2 and 1.3, but the problem remained with both Tiger and Leopard. The tech decided to send me a new battery (it's on the way) and I wish to try installing Leopard again. As long as I have my cloned Tiger image, all I have to lose is my time, but hopefully, not another battery! I would honestly like to get Leopard running on this machine.
But... here's my question. In reading through these discussions in both the Leopard and MacBook forum, there doesn't seem to be any consensus of which BatteryUpdater package to use. The Apple tech honestly told me he didn't know. Also, if the BU package "writes" to the battery (which it states it does), can it be downgraded once v1.3 has been installed? I mean, should I leave the battery out, install Leopard, then manually update BU to v1.2 before installing the battery (if possible)? I do plan on testing the new battery with my Tiger install, just to verify it is working as it was before.
There are a lot of people here claiming to be knowledgeable about Leopard, never had any problems with a variety of machines, etc, etc, so I would appreciate your input. Please don't speculate, but if you're using a version of BU that works with Leopard and your 1st Gen MacBook, I would appreciate you telling me about it. I have tried to document and methodically relate everything I've done so far, but if you need additional information, just let me know.
I noticed Leopard had installed BU v1.3 when I checked it, so it must use that as default, since I noticed Tiger had v1.2.
OR, am I way off base on this? Can anyone think of another reason I may have had this problem? Am I barking up the wrong tree by concentrating on the BatteryUpdater package? Is it possible all these batteries are failing under a Leopard install maybe due to some unknown reason?
Any knowledgeable advice or suggestions are welcome, thanks!Well, Ding Dang y'all... it appears the battery was the culprit. I received my replacement battery from Apple and followed the same steps and everything seems to be working fine.
It sure was strange that the battery started this problem immediately after Leopard was installed... I don't know what to say about that, unless BatteryUpdater v1.3 started the chain of events.
In case it helps someone else, here's exactly what I did (rebooted through each step):
- Backed up data; unauthorized computer from iTunes
- Erase and install from the Leopard disc, while keeping the old battery in
- Installed Leopard, did software updates except for delta 10.5.1 update
- Applied combo update of 10.5.1 from separately downloaded file
- Found BatteryUpdater Bundle (BU) of v1.3, moved to trash, rebooted
- Ran software updates, BU v1.2 was found and installed
- Then, swapped out battery to new battery
- Tested unit, seems to be okay now, no shutdown issues, battery runtime seems normal
Thanks to all that had advice and suggestions. It was enough to get me to try it again. Now, I have two more machines to upgrade, since these are production machines, I'll probably wait awhile. But, having this is a real treat.
Have a great holiday everyone! -
Now, according to Apple, 10.5 with be totally 64-bit, which, I suspect will be a problem with G4 users as this PPC processor is a 32-bit processor (and not 64-bit).
I was wondering what Apple will be doing about this ? With G4 users just have to 'make do' with just a 32-bit version or with 64-bit be emulated in some way ?
Or am I wrong in assuming the G4 isn't a 64-bit processor ?As I understand it the Unix under-pinnings of OS X were 64-bit in Tiger. 64-bit applications could be used, but only from the command line/terminal application/Unix shell. With Leopard 64-bit support has simply been extended upwards to include certain development frameworks such as Cocoa, allowing 64-bit applications to be used from the Mac GUI with the usual Mac OS look and feel.
As a G4 user I don't think anything will change between Tiger and Leopard. 64-bit support will now be included from top to bottom, but not at the expense of 32-bit support. In a sense we have to 'make do' anyway due to the hardware limitations. For example, one of the advantages of a 64-bit processor and OS is that more memory can be addressed. However, the G4s have a maximum of 4 DIMM slots with 512MB per DIMM, so we're limited to 2GB of memory at the hardware level anyway even if the OS does support more. IMHO, unless you're using specialised applications or need to be able to address huge amounts of memory (for example if you're working with huge image files), 32-bit is fine. If this isn't the case, you should probably be using a G5 or Mac Pro anyway. -
Droplet Script used to work fine in Tiger and Leopard, now doesn't
Hey everyone,
I'd like to apologize in advance, I'm not really good with AppleScript and was only able to create my droplet in the first place by changing little bits of a Droplet example script I found on the internet (I forgot where I found it, but it might even have been here at Apple).
The script worked perfectly fine in Tiger and Leopard but throws an error in Snow Leopard. The error says "Can't make alias "...filepath... "into type file."
The problem is that I can't find the problem in my script. I don't get any indication which line it may be and I hope someone here will be able to help me.
I also tried Script Debugger, but the script works there! So that doesn't help either...
I'd appreciate any help, here is the script:
-- QuickTime supported image formats
property type_list : {"JPEG", "TIFF", "PNGf", "8BPS", "BMPf", "GIFf", "PDF ", "PICT"}
property extension_list : {"jpg", "jpeg", "tif", "tiff", "png", "psd", "bmp", "gif", "jp2", "pdf", "pict", "pct", "sgi", "tga"}
property typeIDs_list : {"public.jpeg", "public.tiff", "public.png", "com.adobe.photoshop-image", "com.microsoft.bmp", "com.compuserve.gif", "public.jpeg-2000", "com.adobe.pdf", "com.apple.pict", "com.sgi.sgi-image", "com.truevision.tga-image"}
-- This droplet processes files dropped onto the applet
on open these_items
repeat with i from 1 to the count of these_items
set this_item to item i of these_items
set the item_info to info for this_item
try
set this_extension to the name extension of item_info
on error
set this_extension to ""
end try
try
set this_filetype to the file type of item_info
on error
set this_filetype to ""
end try
try
set this_typeID to the type identifier of item_info
on error
set this_typeID to ""
end try
if (folder of the item_info is false) and (alias of the item_info is false) and ((this_filetype is in the type_list) or (this_extension is in the extension_list) or (this_typeID is in typeIDs_list)) then
processitem(thisitem)
end if
end repeat
end open
-- this sub-routine processes files
on processitem(thisfile)
-- NOTE that the variable this_item is a file reference in alias format
-- FILE PROCESSING STATEMENTS GOES HERE
tell application "Image Events"
launch
-- get the parent folder of the image file
set the parent_folder to the container of this_file
-- derive new name for the new image file
set the new_name to my addextension(thisfile, "png")
-- look for an existing file
if (exists file new_name of the parent_folder) then
error "A file named \"" & new_name & "\" already exists."
end if
-- open the image file
set this_image to open this_file
-- save in new file. The result is a file ref to the new file
set the new_image to save this_image as PNG in file new_name of the parent_folder with icon
-- purge the open image data
close this_image
end tell
end process_item
on addextension(thisfile, new_extension)
set this_info to the info for this_file
set this_name to the name of this_info
set this_extension to the name extension of this_info
if this_extension is missing value then
set the default_name to this_name
else
set the default_name to text 1 thru -((length of this_extension) + 2) of this_name
end if
return (the default_name & "." & the new_extension)
end add_extensionHere's the faulty line:
--open the image file
*set this_image to open this_file*
The command open doesn't return anything that could be assigned to the variable this_image.
I also wonder if it wouldn't be better to add “as alias” at the end of each of the following two lines:
*set this_info to the info for this_file*
*set the item_info to info for this_item*
I hope this help. -
I just made two separate copies on external hardrives of all my Lightroom 4 and 5 work. I also cleared everything in my recycle bin to make room on the hard drive. Now, when I go to work in Lightroom 5, I have no pictures. I did check the back-ups, and all the pictures are there, however with a ? on every photo. What do I do to get my photos back into my original Lightroom 5 without the ? marks? Thanks in advance for any help. Al
Now, when I go to work in Lightroom 5, I have no pictures.
Could you provide more details? Is this the copy of your catalog, or the original catalog? Are you sure you didn't accidentally open some other catalog? If you try the catalogs under File->Open Recent, do you find your photos?
I did check the back-ups, and all the pictures are there, however with a ? on every photo. What do I do to get my photos back into my original Lightroom 5 without the ? marks?
Backups will work properly if you restore the catalog file and the photos to their ORIGINAL locations.
Maybe you are looking for
-
Can not add item to the shopping Cart with FireFox 8.0
I can not add items to the shopping cart with Firefox 8.0. Switch to IE everything works then.
-
Wanted to update iTunes to newest version. After install got "Error 7 (Windows erroe 193) I tried to uninstall and reinstall but still get the same message. Please help!
-
Is it possible to control the height of the Portfolio panel via the PDF Portfolio itself?
Hi All, Is it possible to embed into a PDF Portfolio kind of a directive to Adobe Acrobat Reader what should be the height of the Portfolio panel (red line on the image below)? The idea, basically, is to adjust the height of the panel to the number o
-
does anyone know where i can go about getting replacement speaker wire for the s750? i've moved a ridiculous amount of times and lost track of my rear speaker cables.
-
Composers, Genres but no longer Audiobooks. That clasification is absent from my iTunes as well. I have downloaded an audiobook to my IPhone and it shows in iTunes when I click on "On This iPhone" in ITunes but I can't find it on the iPhone itself. W