UPS for network equipment and phone system

I just played with a wattmeter to get accurate numbers prior to purchasing new UPS's. Quite a difference between quoted and actual and the $16 I spent would have easily been recouped in not buying as many new units except I bought it out of my own pocket.
Our phone system is on a UPS provided by the vendor but it has the XR additional battery for longer runtime.
I measured about 50W for each of our 24 port HP ProCurve switches but that really means nothing to you, except that the configurators would spec them at double that.
Your upper limit here is probably a 1500VA, then you get into needing a 20A outlet or greater. Additional runtime can be added with external batteries.

Spice heads,
Our agency is considering purchasing UPS's for a few of our larger offices. Am I correct in assuming that a 1000 watt ups would be enough to keep the following items up for at least 10 minutes?
3 Cisco managed 48 port switches
Broadband modem
TZ SonicWall
NEC Phone system (2 cabinets)
3 phone modems and/or a pri
Some our offices experience power flickers throughout the day, therefore I just want to keep these items on. Please let me know your thoughts.
This topic first appeared in the Spiceworks Community

Similar Messages

Using different templates for the desktop and phone versions of the same blog

I have a site which was created in Adobe Muse and is hosted on Business Catalyst.
I have created both a desktop and a phone versions of the site.
I want to know how I can integrate the blogs that I currently have on the desktop site with the phone version that I just did, using different templates for the desktop and phone versions of the same blog. This is in order to ensure that visitors to the blogs on the website are directed to the templates that render correctly for the devices they are using.
My current approach has been to create both a desktop and phone versions of the blogs. The problem with this however, is that the dates are different and the comments are separated between the two blog versions!
I have also tried enabling mobile templates in BC, but still couldn't find a way to specify the mobile versions of the templates for the same blog?
To recap my problem, I basically need a solution where the same blog uses different templates for desktop and mobile (both templates use different navigation headings and menu styles)
Thanks.

There can be few reason for this, including page contents links or contents used in phone/tablet version.
Please provide the site url , also try to publish the site as a trial site in Business Catalyst with all layouts which would help to isolate the issue.
Thanks,
Sanjit

There is no PSA for InfoSource 8ZCCA_O09 and source system BWPCLNT800 RSAOD

Hi All:
We make a Heterogeneous system copy of BW 3.5. from Solaris 9-Oracle 9i to AIX 3.5-Oracle 9i.
We must have to rename the Logical System Name and during the Functional Testing the users configured the conections again in RSA1 transaction, then they start the
testing phase but get the next error in the Monitor-Administrator Workbench:
"@5C@ 28.02.2008 19:59:31 There is no PSA for InfoSource
8ZCCA_O09 and source system BWPCLNT800 RSAODS 203"
We can see that the errors refers to the old (BWPCLNT800) Logical
System Name; during the configuration of the RSA1 they renamed the
Logical System Name of the BW System to BWNIUSA800.
We found the SAP Note 518426 but we are not sure about if we can
execute it without affecting the system or the configuration.
Some one Can help us ?.
Best Regards
Reynaldo Rebolledo.

Hi Reynaldo,
this forum here is related to SAP NetWeaver Master Data Management. Your question seems to be related to SAP BI. Please raise your question in the [BI Forum|/community [original link is broken];, because I do not think that you'll find the experts to answer your question here.
BR Michael

No PSA for Infosource X and source system Y. Here Y is the flat file source

Hi,
We are facing an issue while transporting from dev s/m to quality. There is no PSA for Infosource X and source system Y. Here Y is the flat file source system this issue we are getting while transporting transfer rules.We are checked in OSS notes 518426. Its not helpful.
Thanks
Manjula

Hi
Try RS_TRANSTRU_ACTIVATE_ALL (SE38).
You may also check SAP Note 861890 - ODS tables disappear during the upgrade -
and activate all ODS Objects before the upgrade and run the program RSDG_ODSO_ACTIVATE.
also that with Stack 14 an extended version of this program is available together with the
Program RSUPGRCHECK. If errors occurs, consult also SAP Note 518426 and run transaction
RSSGPCLA for the regeneration of the RSDRO_* Objects.
Recheck whether you have Exported with correct parameters or not -- Try to Re Export the Same with all necessary objects .
Try Note 524554 and 325525 also
Hope it helps and clear

There is no PSA for InfoSource ZOUTNBR_TEXT_CC and source system PCFILE

Hi All
The above subject line shows the error.
I have a custome data source in Development that is ZOUTNBR_TEXT which has a source system PC file.(flatfiles)
when i transported all transfer structures and data sources from Development to Quality, only my transfer rules were not activated. but when i manually activated in Quality it throws with an error
There is no PSA for InfoSource ZOUTNBR_TEXT_CC and source system PCFILE
Please let me know how can i activate my transfer rules.
Archana

Hi,
We also faced the same issue while transporting from dev to QA. We raised a OSS, for which SAP has replied saying that there was some inconsistencies with the infosource and they have repaired the same in debugging mode. The root-cause for the issue is unknown. So they have not given any notes to us.
But meanwhile we created a new data source and transported it. that worked fine.
Regards,
PM

Cofig guide for connecting CRM and R3 system

Can anyone provide full cofiguration guide for connecting CRM and R3 system from end to end.
also complete information about bdocs settings in Adminstration console.
regards,
Sunil

Hi
Please follow the link
http://help.sap.com/saap/sap_bp/CRM_701_XX/Html/index.htm
then go to the following hyperlinks
B01: CRM Generation
B09: CRM Customizing Replication
C03: CRM Master Data Replication
Meticulous follow these three documents then you will be able to connect CRM AND ECC systems and will be able to perdorm initial load of customers, materials etc
please let me know if you have any issues
thanks
Ananda kumar karri

Why is my account being blocked from buying diamonds inthe iron force game. I am trying to buy the diamond mine for $ 99.99 and the system has blocked me for the past 3 days and itunes has not resolved the blocking problem. I see many other complaints her

Why is itunes blocking my and others accounts from buying diamonds and cash in the iron force game. I have been blocked for the past 3day April 28_29_30from being able to buy the diamond mine 1650 diamonds for $ 99.99 and another package of diamonds for $ 49.99' this looks like the old bait an d switch game where a great deal is offered and then you adore forced to buy something less expensive. I have been in computer business for over 30 yrs and all iyunes needs to do is reset the accounts on their system yet they don't want to do that. Also of note I was allowed to buy small amounts of diamonds only to see that some were taken from my account when I was signed and no message as to why this was done. I had 1230 diamonds and did. Not play the game an the next thing was I had only 1170 diamond?.? What's that all about. Itunes is not respecting customers or. Good business practices. And very. Stupid for not selling uds , the customers the products so itunes can really make more money. I have spent many hours on the phone to resolve this only. To get the run around
Nd. Come on itunes reset set our accoummnts and let us buy. We will all have more fun and you get more money. Can't remember ber the last group who turned their back on nmoney but itunes you are the best at doing that fix things pl ease

http://www.apple.com/support/itunes/contact/
Contact iTunes and ask them. This is just a user to user forum so no one here has any ability to answer your questions with anything but a guess.

WiFi on and looking for network, on and looking for network

My WiFi is on and then looking for network and then on again for a little while and then looking for network and so on.
The result is a lot of waiting...
Very slow connection.
Is this normal

You seem to understand it. I believe that when you tether, you have a separate allowance (I believe mostly it is 2GB) aside from your normal data balance. When you tether, it automatically uses the 3G to tether, not the wifi and the data will be subtracted from your tethering allotment. When you use data on your phone, it is subtracted from your normal data allowance (the pool not reserved for tethering) but only when using 3G. If you are on wifi on your PHONE (not tethering) it won't subtract. Hope that sort of makes sense.

What is the best product for network mapping and monitoring? I am an inexperienced user). Mac 10.9.2 laptop

I have lots of questions, but the gist is that I want to know the best product, preferably from the app store, that I can use for network mapping mapping and monitoring.
I want to get their mac address or other police trackable etc info so I can use my computer safely.
I am also being cyberbullied.
I try just using ethernet but still get intruded on, for instance, messages that "other devices are using my ip address". The only other device I own is an iPod that I keep sahut off plus wifi turned off then.
(NOTE: You can skip the rest of this message if you want. It regards hacking attempts etc, a little out of the scope of discussion, perhaps).
Also a home intrusion where computer was thoroughly hacked with router(s) set up "very very close to me," according to Apple.
Also, hackers get into my Facebook and gmail and yahoo mail, really, no matter what I try to do on my computer and how many times I change passwords it does no good.
Also, The ip addresses for google and the one in syste preferences and the one looking up my ip address on ip chicken always gets three different results.
More worrisome it that hackers got into my Wells Fargo account a week after the intrusion even though I changed all account #'s and pw plus notified bank. They also broke into paypal using my new account numbers.
Also, stuff like Facetime pops up on my computer without my clicking on it even though I'm using ethernet to connect. I've given up on Time Capsule because I'm told that's how the hackers hacked my computer so thoroughly duriung the intrusion.
Thanks.

Aubry,
why don't you send your sequences straight to Compressor first, encode your movies as MPEG 2 and AC3 audio and import all assets in DVD studio PRO?
G.

I can't type anything. Typewriter comes up for a second and phone shuts what I was on and goes to main desktop page.

Today, I cannot type anything. In notes, reminders, email, safari, facebook, every time I go to put the curser on a spot to type, or try to add another note, the phone jumps out of the file I am in and goes to the main desktop page. It worked around 7 PM when I was checking something online while I was out, but when I was back home and tried to update one of the notes I update daily (I am keeping a log), this started happening. It won't go to the typewriter keys (it flashes them for a second and then everything disappears and I am at home page again. When I clicked the bottom middle button, a black screen with the white apple appeared but my icon page came back when I pressed it again. I shut down and immediately opened again, thinking a reboot would help but it didn't. I have it shut down for the night and tomorrow if same problem I will call Verizon. Wednesday, I tried to check my calendar to see what day was best to schedule something, and none of the entries were there... not even the birthdays. I use iPhone calendar as my main calendar and have all my appointments stored there. That did come back about an hour later when I went to add an appointment.
I am hoping this new problem fixes itself with an overnight shutdown and morning reboot. Wish me luck.

This is a pretty bizarre situation, Grandma_Patches. I would suggest backing up your phone to iTunes, completing a restore of your device and then the update. I'm confident that this will address and resolve your concerns. Keep me posted.

Can I use my headset for "sound-out" and phone mic...

I have an E51 and the headset that came with it. I would like to achieve the following during calls: To use the headset for sound-out (i.e. as headphones) and the phone mic for sound-in. The mic on the headset gives a lot of static and I would rather use the phone mic (girlfriend complains).
So I tried this: Under Tools>Settings>General>Enhancement, I set the Default to Headphones.
Still, when I connect my headset it says "Default Enhancement: Headset" and the headset mic is automatically used.
The default enhancement settings does not seem to matter.
Does anyone know if there is a way to solve this? Is there a way to manually switch between the headset and phone mics?
Thanks!

Thanks for the reply. I am not using a bluetooth headset but a cabled one (that one that came with the phone for me -- I guess nokia skimped a bit here, not shipping with a bt headset).
I was recently told basically the same thing you are saying in a store, that it is not possible to use the mic for sound-in during a headset call. He also said that any cabled headset or even *headphones* will be recognized as a headset by nokia phones because they all have the same 3 connectors (right, left, mic) on the 2.5mm jack. Can that really be right?
So that means that even if I get a set of cabled headphones for my e51, I will not be able to use them for sound-out during a call?
cheers

Automatic connection between call center and phone system

Dear friends,
I have one customer, they have a phone system in their call center.
When implemeting CRM 2007, they want to have an automatic connection betwwen their phone system and call center in CRM. This means when having a call from customers the call center system ( CRM 2007) searches automatically or updates the phone number ( this phone number is get automatically from phone system ).
Does this is possible in CRM 2007? Or if u have any solutions pls let me know.
Thanks and Regards,
Nghi Do

Hi,
Just check if this blog is of any use to you:
What is Computer Telephony Integration (and Why Do I Need It?)
Thanks and Regards,
Rohit

HT4367 Anybody has a solution for network time and day set up for apple tv 3?I also have difficulty about my apple id and password with the apple tv. My password/apple id works fine with my other gadgets. Thanks. Ugur Erkmen

My problem started after the itunes update.i reset the apple tv.Now I cannot sign to itunes and i cannot reset the network time and day.

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

My iPad says no service, and cannot connect to the server,cannot get mail .Sim card is locked and down to one last try.My wireless works for other pads and phones.

IiPad says no service,and in mail says cannot connect to server.Wi Fi is working fine.

You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.

Wifi has suddenly stopped working. There is an exclamation mark which takes me to network diagnostics. This asks me for network name and password. This is different from the startup wizard which only asked for a WEP key and modem name. What to do?

My wifi has suddenly stopped working on my iMac, after working fine for almost a year. There is an exclamation mark on the wifi bars and when I click it, it takes me to a network diagnostics page. This page asks me for my username and password for the wifi, which I don't have. It is different from the WEP key and modem name, which I originally used to set up my connection. I have not experienced any problems on all my other wifi-enabled devices. Ipod touch, iPad, MacBook all work fine. What should I do?

The name is the name of the network you created on the router. The password is the WEP password. You shouldn't be using WEP at all, as it's insecure and also seems to cause connection failures. Use WPA 2 Personal. If your router doesn't support it, get a new one.

UPS for network equipment and phone system

Similar Messages

Maybe you are looking for