Urgent :Check print template not getting attched to the conc program

Oracle apps version : 11.5.10.2
XML Publisher : 5.6.2
Other XML publisher program works fine, but for check print progam rtf template doen not get attached at run time.
path: Payables --> Payments --> Once you click on pay , 2 concurrent programs gets fired. Payments process manager and other one is Format payments program. Now for this Format payments program i have attached my template.
But at runtime it looks like the check print template is not getting attached to format payments program.
I have verified short of con progrma, and code of data defn and templates and found that all are in sync (i.e. all 3 have same short name and code)
Any help is appreciated .
Regards,
Sameer

Hi,
See if the documents referenced in these threads help.
Printing Checks from Oracle r12
Printing Checks from Oracle r12
Reports Printing in EBS R12
Reports Printing (CHECKS) in EBS R12
Regards,
Hussein

Similar Messages

Working on check printing template,Getting Extra space in second page

I am working on check printing template,in case of multi page output.I am getting almost 1/2 page blank space and getting disturbed output.
Please provide mail id so that i will share template and xml.
Thanks in advance.
Mahi

Send me the template and the xml, i ll try to figure out the issue
my main id is : [email protected]
Ragul

I am getting the following error when I open my Safari Browser.the proceedure entry point sqlite3_wal_ check point could not be located in the dynamic link library SQLITE3.DLL

I am getting the following error when I open my Safari Browser.the proceedure entry point sqlite3_wal_ check point could not be located in the dynamic link library SQLITE3.DLL

Try going back to a restore point > System Restore - Microsoft Windows

Pdf printer is not get installed while installing adobe acrobat pro 11 in win 7 32 bit

pdf printer is not get installed while installing adobe acrobat pro 11 in win 7 32 bit

BlackCat,
Two things:
1) Acrobat 8 Pro is not Win 7 compatible, no less Win 7 64-bit copmpatible
2) Reader X and Acrobat 8 are not a supported combination. Reader X and Acrobat X is the first Windows combination that is supported by Adobe. Reader X and Acrobat 8 will cause problems.
You are using a brand new 64-bit OS, you need to use an application that is designed to work with it. Acrobat X is the way to go, HOWEVER, there are still growing pains with Acrobat X, Win 7 64-bit, and the latest version of Office.

[svn] 2472: remove flex4. swc - should not have been checked in as it gets produced during the compile

Revision: 2472
Author: [email protected]
Date: 2008-07-14 13:21:25 -0700 (Mon, 14 Jul 2008)
Log Message:
remove flex4.swc - should not have been checked in as it gets produced during the compile
remove StyleProperty.vm - it is no longer used
Removed Paths:
flex/sdk/trunk/frameworks/libs/flex4.swc
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/StyleProperty.vm

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Urgent help req : work item id not getting passed in the method

Hi ,
I have created a subtype zcats of business object CATS and delegated it .
I have created a new method Approve1 ( with attributes SYNCRONUS & DIALOG ) in zcats which is similar in coding to Approve method of CATS ( DIALOG) .
I have include the method Approve1 of business object zcats in a standard task .
The problem is that when the eorkflow gets triggered , the workitem id is not getting passed in the method APProve1 of zcats.
Can someone please help me with this .
Points would surely be awarded .

BEGIN_METHOD APPROVE1 CHANGING CONTAINER.
DATA: WORKITEMID_IMP LIKE OBJECT-KEY-ITEMID.
DATA: WI_CHCKWI LIKE SWWWIHEAD-WI_ID.
DATA: WORKITEM TYPE SWC_OBJECT.
   <u> WORKITEMID_IMP = OBJECT-KEY-ITEMID</u>.
    SWC_GET_ELEMENT CONTAINER '_WORKITEM' WORKITEM.
    SWC_GET_PROPERTY WORKITEM 'WorkitemReference' WI_CHCKWI.
    IF SY-SUBRC EQ 0 AND NOT WI_CHCKWI IS INITIAL.
      WORKITEMID_IMP = WI_CHCKWI.
    ENDIF.
    CALL FUNCTION 'CATS_WF_APPROVAL'
      EXPORTING
        WORKITEMID_IMP = WORKITEMID_IMP
      TABLES
        CONT_IMP = CONTAINER.
END_METHOD.
hi ,
the above is the code in the method .
At the first step of execution underlined above , the work item id is appearing blank .
I think that the value is not passed to the container , but i am not sure og how to pass data to this conatiner

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Header not getting displayed in the next page in the second table

Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin Hada

Hi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.

Structure is not getting filled in the subroutine

Hi Gurus,
I'm working on a Z-report ZMB52 for fetching Reserved Stock and showing it in a column.
The following code in a subroutine I've written for the same.
DATA: GS_RESB LIKE LINE OF GT_RESB.
    CLEAR: BESTAND.
    IF BESTAND[] IS NOT INITIAL.
      SELECT MATNR
             BDMNG
        FROM RESB
        INTO TABLE GT_RESB
        FOR ALL ENTRIES IN BESTAND[]
        WHERE MATNR EQ BESTAND-MATNR.
        IF SY-SUBRC EQ 0.
          SORT GT_RESB BY MATNR.
          LOOP AT BESTAND.
           READ TABLE GT_RESB INTO GS_RESB WITH KEY MATNR = BESTAND-MATNR. "BINARY SEARCH.
             IF SY-SUBRC EQ 0.
               MODIFY BESTAND TRANSPORTING BDMNG WHERE MATNR = BESTAND-MATNR.
             ENDIF.
             CLEAR: BESTAND, GS_RESB.
          ENDLOOP.
        ENDIF.
     ENDIF.
When I debug, I can see that the structure GS_RESB is not getting filled through the READ TABLE statement. However, GT_RESB shows the data.
Could you please tell me where am I going wrong and a way to correct it?
Thanks in Advance!
Best Regards,
Ashutosh.

Hi Joshi
You can use
LOOP AT GT_RESB INTO GS_RESB WHERE MATNR = BESTAND-MATNR. "BINARY SEARCH.
              MODIFY BESTAND TRANSPORTING BDMNG WHERE MATNR = BESTAND-MATNR.
            CLEAR: BESTAND, GS_RESB.
ENDLOOP.
And please check in debug BESTAND-MATNR .
Best regards.

Master data is not getting enabled in the InfoSet.

Hi Experts,
I have 3 DSOs in an InfoSet and I have also brought 2 Master data infoobjects in this infoset.
The master data check box in the infoset is not enabled and also not getting displayed in the Query Designer.
Can anyone please let me know how do I bring the master data in the query???
Also please advice me whether I should have only 3 DSOs in the infoset.
Please help.
Thanks

Hi,
In my DSO I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Transportation lane KEY not getting generated in the table

Transportation lane KEY not getting generated in the table
Hi folks,
The issue is like this :
We have a weekly workorders upload program from legacy systems to SAP-APO. The legacy planners send a .CSV file containing material-wise workroders. A customised zee program picks these quantities & writes them in Prod.planned keyfigures in SNP planning book. This process is done for the manufacturing locations only.
Lately workorders for two particular material M1 & M2 had failed to get upload. It gives the error 'NO VALID SOURCE OF SUPPLY COULD BE FOUND' in its Job log. We did some debugging & found that for successful materials the TRPID is getting generated in the table /SAPAPO/V_TRPROD whereas this TRPID is missing for M1 & M2. Why this is happening is our main concern. We tried deleting the PPM & creating this again, assuming that the PPMID is the precursor for generating this TRPID, but this yielded no results.
____ for successful upload______________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY of successfully loaded workorder
Enter
This gives the following results
TRPID = TRPID KEY
LOCFR = LOCID KEY for manufacturing location
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for successfully loaded workorder
( This seems a self-lane, i.e both TO & FROM location are same)
____ for unsuccessful upload________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for unsuccessfully loaded workorder
Enter
This gives the following results
Error = No Table entries found for specified KEYS
We are perplexed why this TRPID is not getting generated for these two particular material M1 & M2?
We have deleted their PPM & re-created them to cross-check if the PPMID KEY is the trigger for generating the TRPID key. This didn't work!
Please let us know in case someone faced a similar issue.
Many Thanks.
Kumar
Edited by: Blue Lotus on Jun 9, 2011 2:44 PM

Yes Anand.
We deleted the PPM & created it again, which didn't work.
Later on we deleted the product itself from APO & re-CIFed it from R3 & then re-created the PPM.
The PPMID which was missing earlier is now getting created! However no luck with the TRPID.
Why this TRPID is not getting generated in our only concern
Regards
Kumar

TDS amount not getting updated in the table under the field QBSHB

Dear Friends,
The TDS amount entered while booking the vendor invoices through MIRO T-cde, is not getting updated in the table BSEG under the field QBSHB.
Kindly let me know the reason for the same and guide me to correct it
TIA.
Regards,
Vincent

HI Vincent,
Bseg-QBSHB field is relavent for classic WT.
I hope you are using the EWT.
Hence if you post a document through MIRO it will not update
(but if you post document FB60 it will update but wrongly).
Reason is Miro document is posted through interface.
Hence SAP is suggested to not refer the Bseg-QBSHB and etc., fields.
refer only with_item table.
Please refer the below replay from SAP
Please refer the below note .363309
Please review attached note 363309 for detailed explanation
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax' button."
(BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) field is not relavent for
Extended withholding tax and not suppose to use in report FBL1N.
It basically does not make any sense to use the withholding tax fields
of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the
activated extended withholding tax.
regards
Madhu M
Edited by: M Madhu on Jan 31, 2011 1:19 PM

Output type not getting saved in the PO

Hello Team
we are facing one issue where output type is not getting saved in the PO.
we give one output type and than save it , after going back to the PO we see that it is not there.and no output issued
the PO is released properly and there is no issue , any idea what could be the reason for it

Hi,
Check in SU3 t.code, did check box selected u201CDelete After Outputu201D in Spool Control segment in Default TAB
Also check Partner Function VN maintained in Default values TAB in NACR--- > EF Application for your output type
Cross check partners {VN, PI, GS) are assigned to your PO output type in Partner Roles per Message Type
Regards,
Biju K

Data not getting uploaded in the AQ table.

Hi All
We have one issue with the AQ tables.
The scenario is like we first send data from Oracle to SOA and then to a third party tool.
For this we first populate data in one custom payload table and then in to one custom AQ table.
Now the data is getting updated in the paylaod table and XML is getting generated, but it is not getting interfaced to the third party tool.
Reason : Data is not getting populated in the custom AQ table from where SOA picks the data and interfaces it ti the third party tool.
Error is a custom one :
While equeing the data using the below statement
l_chr_corrid := p_in_event.getvalueforparameter ('CORRID');
since the CORRID Id is null it gives us the message :Correlation ID has not been set for the payload.
Part of the code for setting WF parameters :
l_chr_corrid_val := l_chr_event_name || '.order';
wf_event.addparametertolist (p_name => l_chr_corrid_name,
p_value => l_chr_corrid_val,
p_parameterlist => l_param_list
l_local_event.setcorrelationid (l_chr_corrid_val);
l_chr_rule_ret := wf_rule.default_rule (p_in_subscription_guid, l_local_event); -- Returns success
This is quite urgent , hence kindly help us find a sollution to this issue.
Thanks in advance
Trupti

Looks like you havent populated the correlation id. To make sure this is unique use the conversationID, or GUI, etc.
Not sure what version you are on. If 10g look at this note (obviously chnage from file to AQ, concept the same):
http://middleware1.wordpress.com/category/adapters/page/2/
If 11g you should be able to see the property when you edit the invoke activity, there is a tab called properties.
cheers
James

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone. The missing movies are shown as generic movie icons in the iTunes panel. How do I get the original movies to show up again and transfer to the iPhone?

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

Urgent :Check print template not getting attched to the conc program

Similar Messages

Maybe you are looking for