Urgent :Classification Tab in Bussiness PArtner
Dear SAP CRM Guru'S,
Please tell me that in the creation of the Bussiness partners in the CRM server I am not able to enter data in the classification TAB as it is a suppered entry.
Please tell me how to activate the same.
regards,
SAP SD
Hello SAP SD,
does this problem occur in the SAP GUI or in the PC-UI? What is the version of SAP CRM you use?
Regards
Gregor
Similar Messages
-
CallTran-MM01 -Classification tab
Hi Experts,
How can i create MM01-Classification Tab?I have class and class type.While Creating (BDC)MM01-classification tab it asking class,i have entered,but while entering Characterstic value assignment...Wht i have to enter?they have two columns?Where i have to enter..
pls very urgent
Rewarded*
Cheers,
priyaDear Alfred Kingsley ,
What u said is correct but a small correction,
CL02 is obsolete in ECC and CL04 is in place of that
and we have to methods to create Class one is goto CL04 and give the characteristic name and double click on the given char name it takes u to CT04.
or create char through CT04 and give the char in CL04,
we have class type while creating class(CL04)
Batch Class, Material Class ,Variant Class Etc as per our requirement we need to select the class type
Thanks
Surendra P -
Values not getting updated in Classification tab by BAPI_BATCH_SAVE_REPLICA
Hello Experts ,
I am currently facinmg problem with value updation in Classification Tab for Batch Master. To create the classification I have marked BATCHCONTROLFIELDS-DOCLASSIFY = 'X' and to pass values to classification I have done the below coding.
wa_classvaluationschar-value_char = wa_itab-value1.
APPEND wa_classvaluationschar TO it_classvaluationschar.
wa_classvaluationsnum-value_from = wa_itab-value1.
wa_classvaluationsnum-unit_from = wa_itab-meins.
APPEND wa_classvaluationsnum TO it_classvaluationsnum.
Finally called the FM 'BAPI_BATCH_SAVE_REPLICA'. But , inspite of this I am not able to see values in the created Batch. Please advice on the same.
Thanks
-Trishna.Hi Trishna,
You need to update below mentioned fields to udpate that.
OBJECTKEY = concatenate (Internal Material number & plant & batch number)
OBJECTTABLE = MCHA
in both the structures CLASSALLOCATIONS and CLASSVALUATIONSCHAR. It will udpate.
Cheers,
Luri -
Function Module to Read attributes value from Classification tab
Dear Experts ,
We are using material classification in the material master. Under classification tab of material master , we are maintaining certain characteristics and their corresponding values.
I want to read those values and use those in one of the report.
Can you please help me in identifying Function Module which will return the values of all the attributes of that material.
Thanks in advnce,
Regards,
NikhilYou can check those details using CT06 transaction.
FM CLAF_CLASSIFICATION_OF_OBJECTS can be used to retrive the data using program.
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
EXPORTING
class = gc_class
classtext = 'X'
classtype = gc_classtype
clint = gc_mmpsk
features = 'X'
language = sy-langu
object = l_object
key_date = sy-datum
initial_charact = 'X'
change_service_clf = ' '
inherited_char = 'X'
TABLES
t_class = lt_class
t_objectdata = lt_objectdata
EXCEPTIONS
no_classification = 1
no_classtypes = 2
invalid_class_type = 3
OTHERS = 4. -
How to change Sales office in Bussiness partner details
Hi ,
I am unable to make changes in Bussiness partner details ie in Tcode BP .Since the Sales area data has been desabled .
So can any one guide me how to change sales office in BP
regards,
divyaDear Anirudh ,
When i checked the org Structure ,there same user has been assigned to two sales offices.
So when it is taking the sales area data ,it is capturing the data from jammu sales office rather than Chandigarh.
I can't change the User that has been assigned for more than 2 sales offices b'cos of the restriction of User-id
So please help me.
regards,
divya -
CRM function module to update the attribute in the classification TAB of BP
Hi All,
Can any body let me know if there is any functionmodule to update the CRM function module to update the attribute in the classification TAB of BP tcode.
I have searched a lot i get FM to update the marketing attribute and not the attributes in the classification tab.
Thanks in Advance
Edited by: Sharath Kumar on Dec 2, 2010 4:48 PMFor material bom: CSAP_MAT_BOM_CREATE
and CSAP_ORD_BOM_CREATE for Order BOM.
Regards,
Ravi -
Creation of bussiness partner using idoc CRMXIF_PARTNER_SAVE
Hi,
how create a bussiness partner using the idoc CRMXIF_PARTNER_SAVEHello!
This is not easy, but still...
0. Generate Idoc interface if not done already.
1. Define Idoc port in WE20 transaction, allowing inbound processing of this Idoc type.
2. In WE19 (test Idoc) transaction, you could create Idoc with necessary data. For field reference and some internal commands - visit http://ifr.sap.com and locate appropriate RFC.
3. Test it!
For real samples - you could configure some middleware sites in CRM and assign them to XIF - Idoc interface. With test program CRMXIF_PARTNER_TEST you could unload Idoc to this destination site.
Good source of Information - Michael Van Geet has some guidelines on how to set up a XIF site. These manuals describes required actions in details.
My best regards, Andrei Dirotchka -
How can i add new tab in Business Partner
hi every body,
Present i am working on SAP CRM 3.0 version. i need to add new tab in BP. Here EEWB not available. How can i add new tab?Hi babu,
you can add new tab in Buisness partner with the help of screen configaration functionality,in screen configaration u select first bp role (sold to party or retailer etc) and click on process screen sequence and again click on overview and u will get fields right side of the screen, there u will see the field "new screen" click on that and add description for new tab and click on continue,save the document
now u will again create a bp with modified bp role u will see changes means u will see new tab page on perticular bp role
i hope this is helpful
Rewards points if helpful
Thanks®ards
kishore kumar -
Data of classification tab in t-code MSC2N
Hi All,
is there any FM or method to read the data of classification tab in T-Code MSC2N. I need the value of product grade which comes in this tab.
Thanks in adv.CALL FUNCTION 'QMSP_MATERIAL_BATCH_CLASS_READ'
EXPORTING
I_MATNR = gt_SOitems-matnr
I_CHARG = gt_SOitems-charg
I_WERKS = gt_soitems-WERKS
I_MARA_LEVEL = 'X'
I_NO_DIALOG = 'X'
I_DATUV = SY-DATUM
IMPORTING
E_CLASS = LV_CLASS
E_KLART = LV_KLART
E_OBTAB = LV_OBTAB
E_OBJEC = LV_OBJEC
EXCEPTIONS
NO_CLASS = 1
INTERNAL_ERROR_CLASSIF = 2
NO_CHANGE_SERVICE = 3
OTHERS = 4.
IF SY-SUBRC = 0. " If Class...etc found
*--Get classification information
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
OBJECTKEY = LV_OBJEC
OBJECTTABLE = LV_OBTAB
CLASSNUM = LV_CLASS
CLASSTYPE = LV_KLART
KEYDATE = SY-DATUM
LANGUAGE = SY-LANGU
TABLES
ALLOCVALUESNUM = LT_ALLOC_VALUES_NUM
ALLOCVALUESCHAR = LT_ALLOCVALUESCHAR
ALLOCVALUESCURR = LT_ALLOCVALUESCURR
RETURN = LT_RETURN. -
BADI to get characteristics of class in classification tab at MM01 / MM02.
Hi all,
Is there any user exit or BADI to get all characteristics entered at the classification tab while creating or changing a material (MM01/MMO2) before saving.
Regards,
ChinnaHello Chinna,
When you Enter Characteristic value by using F4 help under classification tab BADI CACL_VALUE_CHANGE will be called.
And you will get the following values one by one (as you kep on entering)
I_CHARACTERISTIC_INTERNAL Internal Characteristic
I_CHARACTERISTIC_ID Characteristic Name
IS_COMMUNICATION_STRUCTURE Communication Structure: Classification
C_ATWRT Characteristic Value
Please create an implementation of the above mentioned BADI and set a breakpoint on the code and check the values of the above parameters.
Regards
Arindam -
DMS :Select Range for User defined fields in Classification Tab in CV04N
Dear All,
We have added User Define Fields Date field in Classification Tab in CV04N Transaction But it has single search (parameter) where we need to have Date range selection (Like Select Option) for the documents.
I request you to suggest me some solution whether it is possible to achieve with any standard configuration as it is very critical to the Business .
I would appreciate for your quick response and support.
Thanks in Advance,
Regards,
Vishal.Dear Ravindra,
Actually My requirement is when we enter the exact date in the input field its giving the documents submitted on that date.But when i give date range its not displaying the any documents where the document submited in between those two dates.
Ex: I have submitted the document ( in CV01N ) for the approval on 10.05.2010(this is the same field in classification).
In the CV04N transaction ,classification tab if I enter date as 10.05.2010 its giving the document submitted on that date.but if I enter the two dates 01.05.2010 and 20.05.2010 where document is been created B/W the input dates.
Please suggest how to fulfill my business requirement ,I also request to check any configuration for the user defined fields can solve this problem instead of selecting single value when it can select the range of values.
Thanks for your earlier reply.
Regards,
Vishal. -
How to add a New Tab in Business Partner Transaction
Hi Friends,
Please help me out to "How to add a new Tab in Business Partner Transaction?
Regards,
RickyHi Rajendra,
It will be gratefull to have some EEWB docuement.Can you please forward me ?
Regards,
Ricky
Edited by: Ricky Maheshwari on Dec 21, 2009 6:51 PM -
In MSC2n - Get date in the classification tab from basic data 1 tab
Hi All,
My requirement is as follows.
WHen I execute the tcode MSC2N,
Relevent data for the fields Batch, Material and Plant and hit the enter Key.
This displays Tabs like BASIC DATA1, BASIC DATA 2 , CLASSIFICATION etc.
when I change the production date in the BASIC DATA1 and then click on the CLASSIFICATION tab, the prodiction date should get displayed automatically in this tab.
There is no USER-EXIT or BAdi for this.
I need an enhancement point.
Plz help me .
Regards,
Renuka
Edited by: Renuka Sarode on May 11, 2010 9:51 AMHi Reddy,
Its doesnt work for me...
Plz suggest me som enhancement..
Regards,
Renuka -
QS41-Use / Imp of Classification TAB.
Hi All,
This is related to transaction QS41. In this transaction we define codes and code group for catalog type E(defect location). On main screen of this transaction we have TAB Classificaton. Can any one please let me know waht is the importance of this classification TAB with respect to code & code group. In which business scenario we use this functionality.
Thanks & Regards
kundan KumarHi
Classification system helps us to group similar objects.We maintain characteristics to describe objects and similar type of objects are grouped or classified under classification system. Go through the following link for better understanding:
Link:[http://help.sap.com/printdocu/core/print46c/en/data/pdf/CACL/CACL.pdf] -
Missing Classification Tab Page in MM03
Hi Gurus
I normally create new material in MM with the copy reference of similar type of material.
I did same thing for one material and now in new material "Classification" tab page is missing..
I am absolutely sure it was copied.
Is there any way we can get it back in MM03??
All suggestions are welcome
Regards
UtpalHi Radhika
No I can't as there is alreday some postings been done... But wondering where the tab page has gone??
Any other way system displays it???
Thanks & Regards
Utpal
Maybe you are looking for
-
K330 Video card upgrade question.
New to forum and was just about to pull the trigger on a new K330-77471CU (from BB). However, I read a customers comment saying that this unit only had an AGP port, no PCI express slots for upgrading the video card, can this be true??? Does'nt seem p
-
Need Help Bank Account balances-Urgent
Hi Masters,Can anyone help me to identify if we have any concurrent programme availaible (report) to obtain the daily opening and Closing balances for bank accounts for a SPECIFIED PERIOD I looked around but no luck..Even though I found a report in C
-
Hi All, We are using 11.2.0.2 Database. A customer of ours has sent us a copy of their database in rman format. There are no instructions with the files. The files sent are something that looks like it might be a control file, a number of backup file
-
MSI K8N NEO Platinum Edition memory question
Hi there, I've currently got a MSI K8N NEO Platinum Edition (Nforce 3) motherboard and 2X 512 MB Corsair Value Select memory modules (both double sided) running at DDR 400 - this runs completely stable and has done for a number of months. I would lik
-
I bought PS6 last month and got the discounted version as i am a student. I just bought Lightroom. Do i have to re-verify with adobe that i am a student? i read somewhere on the website that i'm verified for 3 months but another part of the website s