Urgent issue in sapscript regarding text display

can anybody help me out with this issue, it  display text at the bottom of all the item no like this.this trext is called using fm READ_TEXT.
00010   60008145  ROTATING ASSY.KIRLOSKAR 4UP3 TYPE:UP100/                                                                               
1.000      NOS                    24.02.2007            
    00020 60004605  SLEEVE KIRLOSKAR PUMP UP-100/38 24.02.2007
                                      2.000      NOS                   24.02.2007                    
    00030 60008144  CI NECK RING FOR KIRLOSKAR PUMP MODEL UP   
                                     2.000      NOS                    24.02.2007            
      ROTATING ASSEMBLY FOR PUMP
      MAKE: KIRLOSKAR
      TYPE:4UP3
      Q:170m3/hr
      HEAD:45M
      AS PER SUPPLY OF PUMP
      AS PER SUPPLY OF PUMP
<b>Where as it should display as</b>
    Item        Mat_no       Description                     delivery_dt
                                   quantity   Unit
    00010   60008145 ROTATING ASSY.KIRLOSKAR 4UP3 TYPE: UP100/                                                                               
ROTATING ASSEMBLY FOR PUMP
                                                                   MAKE: KIRLOSKAR
                                                                   TYPE: 4UP3
                                                                   Q: 170m3/hr
                                                                   HEAD: 45M
                                        1.000      NOS                    24.02.2007            
    00020 60004605  SLEEVE KIRLOSKAR PUMP UP-100/38 24.02.2007
                                                                  AS PER SUPPLY OF PUMP
                                         2.000      NOS                   24.02.2007                    
    00030 60008144  CI NECK RING FOR KIRLOSKAR PUMP MODEL UP   
                                                                AS PER SUPPLY OF PUMP
                                         2.000      NOS                    24.02.2007
thanks and regards

this might be bcoz of control flow problem..
check properly where the variable for text is given in the script..
that shud b given just after line item printing..
if it is given in a diff text element  check the program for the order in which u r calling the text elemnt...
Message was edited by:
        Sheeba Bhaskaran

Similar Messages

  • Regarding TEXT display in ME21n transaction

    hi,
    in ME21n tansaction, m getting TEXT ( Explanatory text for line item ) for some purchase order documents n not getting TEXT for some purch. order doc's. For this text Exit "MBCF0002" WAS USED. plz let me know wht to do.

    Hi
    That enanchement should be to updated the item text, so u need to insert a text if it's initial and/or the po is of a certain type: u should give us more detail in order to know when the text has to be updated.
    Max
    Edited by: max bianchi on May 28, 2008 6:35 PM

  • Text display issues with htmlText, Embedded Font

    Hey All,
    I'm having an issue with the display of my hyperlinks in a
    textfield that is using embedded fonts. It offsets the hyperlinks
    to the left along the line they are on and the underline doesn't
    stretch all the way under the text field. The text display normally
    when I don't embed the font. For some reason I think this might
    have to do with the embedded character range so I opened it up.
    Does anyone know if this range is enough or if there are special
    characters flash uses that need to be embedded for their width even
    though they arn't displayed.
    Embedded range:
    [Embed(source='MyriadPro-Regular.otf', fontName='Myriad Pro',
    unicodeRange='U+0000-U+00fe')]
    Here's a link to the related code:
    http://pcpnew.privatepaste.com/a7eKaAuCTt

    Any ideas?

  • Can anyone help me solve the problem of text displaying very rough on my new ASUS PA279Q display monitor running off my MacBook Pro?

    This is regarding a brand new ASUS PA 279Q, 2560 x 1440 IPS monitor. I'm connected via mini display port (into thunderbolt port on MacBook Pro) to display port on ASUS monitor; using cable ASUS included with the monitor. Mid 2012 MacBook Pro…full specs at bottom of this post.
    I have resolution set at 2560 x 1440 which is the native resolution according to the ASUS spec. I tried the other resolutions available in my System Preferences and text displayed rough with those settings too. I've tried adjusting contrast, brightness and sharpness via the ASUS control panel and didn't solve the problem. Also tried calibrating via Mac's system preferences/display and that did not improve text display either. All the text on this monitor (no matter what software I launch, Finder, InDesign, Illustrator, MS Word, Excel, VMWare Windows XP, Windows versions of Word, Excel, Acrobat, etc, all are consistently rendering text the same way ---  ROUGH and with "HALOS" around each letter.
    All point sizes of text and at various scales, display very rough on the screen. (My comparison is the retina display of my MBP and a Thunderbolt…so those two displays are my expectations.) I'm using the same MBP for both a Thunderbolt display (at work) and this ASUS at my home office.
    On the ASUS it's not as noticeable when the text is on white backgrounds, but I'm a graphic designer and compose images with text all day everyday. Not to mention the specs on this ASUS PA279Q indicate it's built for the professional so I would expect better text rendering. I haven't even addressed color calibration and balance yet, because that won't matter to me if the text won't display any better than it is now.
    I was so hopeful after researching all the specs on this monitor it would be a viable alternative to the glossy display of the Thunderbolt display. (Which, I do love the Thunderbolt display for it's clarity and how it displays crisp, clean text at all sizes. (This ASUS actually displays text decently if I increase the text so each letter is about 4" high. Which is pointless for practical purposes -- that'd be like doing page layout through a microscope!)
    I kept holding off on getting a monitor for the home office thinking the Thunderbolt would be updated soon. I'd be sick if I dropped a grand on piece of 2011 technology only to learn a few days later an updated Thunderbolt display hit the market! Not to mention, I'm praying Apple comes out with a less reflective Thunderbolt display. The glare and reflection is the main reason I looked elsewhere for a large monitor; hence my asking for help. Hoping the ASUS text display issue can be worked out. My expectation is for it to display like the MBP retina and Thunderbolt display text. That possible?
    Alternatively, I guess I could do the Apple Refurb Thunderbolt at $799. And see if there's a decent aftermarket anti-glare I could stick on it?
    Thanks for reading my post. Hope someone can help; offer any suggestions? Words or wisdom?
    Has anyone else had similar issues and figured out a resolution? Help!
    MacBook Pro
    Retina, Mid 2012, 2.3 Ghz Intel i7
    8GB 1600 MHz DDR3
    OS X 10.8.5
    NVIDIA GeForce GT 650M 1024 MB
    ASUS PA279Q

    I uninstalled those two items. It still runs slow on start-up and when opening safari, firefox, iphoto, itunes, etc. It's not snappy like it used to be. Any other ideas? Thanks.

  • Re: Related to CJ20N Urgent Issue

    Hi Guys,
    This is an Urgent Issue!!!!
    I have a requirement to upload the data .Initially they have created project definition and wbselement with the help of some data transfer technique later on they have added custom fields to this transaction.
    Now for the existing project and wbs element they want to update the values for the new custom fields .
    So can anybody suggest me how to approach this problem as this is my first requirement in PS.
    Points will be rewarded....
    Awaiting for your reply..
    Regards,
    Ravi Ganji

    Hello,
    To update Customer fields in a WBS element you can use LSMW recording mode for Tx: CJ02
    Enter the WBS element definition on the initial screen and cheese 'enter'
    in the WBS element overview, choose first line and select from menu: ' Details -> <Customer Fields> (This is an exit and you may see a different text over here) and you see the customer fields. fill the values in the fields and save.
    Hope this helps. Also please close all your previous threads.
    Best Regards, Murugesh AS

  • PO output email text displayed incorrect with #

    Hi All,
    When sc is created and resp PO is created and email sent to the vendor.
    Her the problem is the text in the email is displayed with # as
    " Please find the purchase order XXXXXXXXXX entitled kumar#08.12.2011#05:04."
    Please tell me how to solve this issue.
    Kumar

    Dear Kumar,
    It is possible that this issue is happening due to cusomized smartforms. In order to check make sure that standard smartforms BBP_OUTPUT_COVER is being used and retest the issue.
    Kind Regards,
    Conor Harkin

  • How to put check box in a table format at the out put ?  Urgent issue...

    Hi,
    I am working an assignment to assign multiple roles for multiplr user.
    In selection screen we have to enter mutiple EMPNO from ..to
    1)  in second screen we will get the empno, First name, last name,  Position,
        From  date, To date, Sap user ID, Email id in the table formate with first
        column  with Check box.
    2) In second screen below the table I have to place the multiple roles just like in
       the step  loop format and below this one Execute button should be there.
    If we select the multiple employees or single employee and place the multiple roles or single roles and if I click the execute button then the multiple roles will be assigned to the multiple employees. The empno and roles will come from table and step loop to internal table and the same will pass to the BDC.
    For this requirement I prepered recording for Transaction PFCG. But I can't understand how to design the second screen that table format and the step loop format. Can anybody give any idea or any coding to design  the second screen.
    and how to meet the requirement. This is urgent issue. Good SDN points will be reworded.
    Witing for kind response.
    Thanks in advance.
    Bansidhar

    Hi upendra
    There are slight changes in the sivas code.Where is the data coming into the table.If its from a Model Node then iterate each element of the source node get that value compare and set the corresponding value in the element of the node binded to table.
    Create a boolean attribute "select" in the table node and bind it to checked property of the check box.
    for(int i=0;i<wdContext.node<tablenode>()..size();i++)
    if(wdContext.node<tablenode>().get<tablenode>ElementAt(i).select())
    wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(true);
    else
    wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(false);
    See the attribute is boolean so pass true or false as a values in setter methods.
    Regards
    Kalyan

  • How to influence the text display of key figures in the interarctive DP

    Hello all,
    Does anyone know if there is a possibility (BADI, etc.) to change the text display of key figures (not characteristics!) in a planning book/data view?
    I know that you can define a free text in the data view but still, this is only one fixed text and it cannot be changed.
    Reason for the request: We would like to use the same key figure (and hence, indicate 2 different texts) for two different purposes (in different selections) without having to create a new data view.
    Kind regards,
    Klemens

    if you dont want a new data view and might even go to the extent of creating a user exit for this ... here is an idea
    - just create auxillary KF ( or use spare Temp KF depending on what you want to do with the data in the view) for each of these KF with the text
    lets say you have KF1 and KF2 - create KF1A and KF2A
    Make sure KF1A = KF1 and KF2a = KF2
    Now depending on user you can display KF 1 and KF2 or KF1a and KF2a depending on the user by using macros USER() and ROW_VISIBLE(0)

  • How to edit the text displayed in KM Upload link?

    Hi All,
            I want to edit the text displayed in KM Upload link ie "You can upload a file to the repository from your computer. Click "Show Properties" to assign another name or to change the settings".
    I tried searching for the resource bundle from which the above text is displayed but couldnt find it.
    Can anyone help?
    Thanks in advance.
    Regards,
    Pooja.

    Hi Pooja
    You can find the text in <b>ResourceEditControl**.properties</b> file, which is available under   <i>com.sap.km.cm.ui\lib\km.appl.ui.edit_api\com\sapportals\wcm\control\edit</i>..
    The text is represented by the key <b>txtUploadControl</b>..
    Regards,
    Sandip

  • Very Very Urgent Issue: Restricted Key Figure does not return any data

    Hi all,
    Please help me solving this urgent issue.
    created customer exit variable on characterstics version and also
    other customer exit variable on Value type.
    I coded that in variable exit. Problem is when I include these in
    restrickted keyfigure My query does not return me any data.
    But if I remove from restrickted key firgure and put it as normal
    charaterstics I see the variable is getting populated.
    Also in RSRT the SQl generated when these are included in RKF is not
    correct.
    I debugged and know they are getting populated. As when included in RKF
    I can also see the values of customer exit variables from information
    tab.
    I also know that there is data in cube for those restrictions.
    I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
    FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
    Thanks
    SAP BW
    **Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

    Hi,
    Everyone out there this is very urgent. If someone can help me solving this problem.
    We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
    I posted one oss notes also regarding this issue. But got no reply from SAP.
    So, Please help me solving this issue.
    Thanks
    SAP BW

  • Having an issue with passing the text of a link to a session variable.

    I am having an issue with passing the text from a link to a session variable. I am adding this html as a literal for each item in the list that i have populated with a query.
    List<Literal> lit = new List<Literal>();
    for (int i = 0; i < posts.Count; i+=4)
    Literal someLit = new Literal();
    someLit.Text=
    @"<div class='row'>" +
    "<div class='col-md-12'>" +
    "<div class='panel'>" +
    " <div class='panel-body'>" +
    " <!--/stories-->" +
    " <div class='row'> " +
    " <br>" +
    "<div class='col-md-2 col-sm-3 text-center' id='javascript'> <h3>" +
    " <a href='#' runat='server' onserverclick='UserProfile_Click'>" + posts[i + 3] + " </a>" +
    "</h3>" +
    " </div>" +
    " <div class='col-md-10 col-sm-9'>" +
    "<h3><a href='Thread.aspx' runat='server' onserverclick='MyFuncion_Click'> " + posts[i] + " </a></h3>" +
    " <div class='row'>" +
    " <div class='col-xs-9'> " +
    posts[i + 1] +
    " </div>" +
    "<div class='col-xs-3'></div>" +
    posts[i + 2] +
    " </div>" +
    "<br><br>" +
    " </div>" +
    " </div>" +
    " <!--/stories-->" +
    " </div>" +
    " </div>" +
    " </div><!--/col-12-->" +
    " </div>" +
    "</div>";
    lit.Add(someLit);
    for(int i=0; i<lit.Count; i++)
    this.Controls.Add(lit[i]);
    I use one of the list positions as the text for a link in two different spots. For now, lets only talk about the line:
    <a href='#' runat='server' onserverclick='UserProfile_Click'>" + posts[i + 3] + " </a>
    Since I am generating these controls at pageLoad, I can't make them <asp:Linkbutton>s. And since they are anchor elements, I don't have access to an onCommand attribute or onservercommand attribute.
    All I want to do is access the content from inside the specific link tags that I generate on link click and set it as a session variable. That's what I would like my UserProfile_Click function to do. I cant commandargs it in like i can with a linkbutton's
    OnCommnad attribute, however.
    My fear is that the onserverclick attribute resolves so something else on pageLoad normally and since I am generating it the way I am similar to the way a <asp:linkButton> resolves to a generated JavaScript.
    Any help?

    @Brunellus
    For questions related to ASP.NET use the ASP.NET forum http://forums.asp.net     
    You should get more, better and faster answers on the other forum.  Thanks, ahead of time.
    Best Regards,
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Urgent: Issue in Automatic workflow Customizing.

    hi,
    Can someone please help me with this issue in Automatic workflow customizing ( SWU3)
    When I try to execute the step
    Maintain Runtime Environment > Schedule Background Jobs with missed deadlines
    I get the error message saying
    "Output Device "" not known"
    Can someone help me how to resolve this? This is very urgent for me.
    Regards,
    Sam K

    The guidelines tell you not use the word urgent in your message title, so please don't. Personally I  try to not answer such questions until at least one day has passed, giving you some time to cool off and perhaps solve the problem on your own.
    I can't recall seing this message myself, but my guess is that either your user or the user WF-BATCH (if the job is being scheduled with that user) has a default printer (output device) that is not defined in the system.

  • Urgent Issue !!! Related to CJ20N

    Hi Guys,
    This is an Urgent Issue!!!!
    I have a requirement to upload the data .Initially they have created project definition and wbselement with the help of some data transfer technique later on they have added custom fields to this transaction.
    Now for the existing project and wbs element they want to update the values for the new custom fields .
    So can anybody suggest me how to approach this problem as this is my first requirement in PS.
    Points will be rewarded....
    Awaiting for your reply..
    Regards,
    Ravi Ganji

    You can use lsmw and do a recording to insert those new customer fields. LSMW can call bdc recording and you can enter the values there...

  • Text displays differently in pdf

    When I export one particular InDesign file (Mac CS 5.5, Version 7.5) to PDF the body text font displays heavier on the 2nd and third page, though it is it's normal weight on the first page. I have rebuilt the document exporting to pdf after the text was formatted, after the images were placed and the body text displays the same on all pages. After I add hyperlinks to urls in the sidebar text, export to pdf then the body text displays heavier on pages two and three than on page one.
    I am not sure if this is an InDesign issue or an Acrobat issue. How do I fix it?

    It's a known transparency issue. Keep the text above the transparent objects might help, but probably won't.

  • Strange text display in pdf using adobe reader exported by Indesign CS5

    Hi there,
    I have export an interactive pdf from indesign CS5 PC version with version 7 update, and it looks fine in most of the PC and Mac Adobe reader.
    But 2 of the computer had strange text display. One is the iMAC with latest version of Adobe Reader
    <== you can see the text "78" and "454" are abnormal
    But with the same computer using Safari with perview plugin is showing following result:
    <==you can see the text are normal.
    The pdf is embedded with following fonts and property:
    Another Windows XP with Adobe Acrobat 9 will had same display as the iMac.
    I ensure the Windows XP don't have the font installed with HelveticaNeue and the Mac is using OS Lion Bundle with that font.
    Now the customer blame it is the problem of the pdf created by me and I had no idea how to explain to my customer and find out solution.
    I had a trial version of CC but same result and no error during the export.
    Any idea is highly appreciate. The customer hotline and the live chat is hopeless as they send me to this community to ask since I use CS5 not the latest version.
    Regards,
    Ichi

    Thanks Willi,
    I had the fonts of Helvetica Neue bold light etc which created by Adobe and the font was created in 1993,shown in font property.
    my PDF output is set to interactive not the print one. Other settings are default.
    the purpose of this PDF is for user to print out and read on website. The funny thing is print out had no problem at all with HP and Ricoh printer using PCL 6 driver.
    Despite Safari, the strange font happened in only Adobe product, other PDF reader had no problem such as foxit reader, xchange reader.
    I tried to not embed the font but not able to do indesign, search in Google, it said it always embedded. Also that font family is preloaded in Mac OS.
    I can try any test if there is a way to find out the solution.
    or what should I do so the PDF should display correctly in all computer
    thanks a lot.

Maybe you are looking for