Urgent issue, Suddenly no data is extracted Once I create new infopack

Hi,
I have an urgent issue and need help.
We were loading data after activating business content. Every thing worked fine and the delta load was also smooth.
However, in order to start everything afresh, I deleted all the info package, deleted the "Intialization option for the source system" AND then created my infopackage for Full upload with initialize option.
In this case the extractor didn't find any data. Please see the following log from the monitor "status " Tab.
"No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system."
This is not correct since we were loading data ( full and delta ) successfully before and there are data in the system. This is most probably to do with the delta queue initialization in the source system.
We were looading data from datassource 0CRM_SALES_ORDER_I.
Please help, we are really stuck.
Thanks
Arunava

hi Anurava,
take a look oss note 692195, i think authorization issue
Activities : 0CRM_SALES_ACT_1
oss 692195
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available).
How can I extract data in this case?
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of  the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).

Similar Messages

  • Issue ELM is sometimes not updating contacts it creates new ones

    Hello experts,
    we have the following problem. We have a list in ELM which contains ORG ID and contact ID. In additional it contains Name first; last name; E_mail adress and a set of marketing attributes.  When I run the list with 651 eintries ELM creates in some cases new contacts instead of updating the existing one. All other contacts are updated properly.
    When I then go to Tx BUPA_DEL delete the new ones and again run ELM with only the new created contacts inside the list ELM is updating the existing contacts and is not creating new ones. So it is shure that not the data contains any errors.
    Any ideas why ELM is doing so?
    BR
    Roger

    Hello Naresh,
    thank you very much for the reply. I´m sorry but it not solves my problem. I have 651 Contact Persons and BP ID´s in the list. Very often for the same Account and everything works perfect. Only a very few times ELM is creating a new Contact instead of updating the existing one. in the case of the list with the 651 Contacts exactly two times.
    Any ideas? Thanks again fopr you help

  • Oracle R12 supplier API to end date current operating unit and create new o

    Can anybody give some idea's for using supplier api's, to end date current operating unit of employee and create a new operating unit for same site in Oacle r12. I need this requirement as employee transfer frequently. As i m a newbie,Will be helpful if u can give a sample query as how to update using api for this scenario.
    Thanks in Advance

    Hi Viral,
    Sorry, this is not the exact Solution which we are looking for.
    Could anyone provide us witha solution or help us in providing the exact functionality of this Address API.
    Thanks,
    Kamatchi

  • While adding custom field in urgent change-Create new field button in AET is not coming

    Dear All,
    we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
    Thanks in advance. points will be awarded.
    Rahul

    Hi Jignesh,
    Thanks for your valueble inputs, it really helped me to understand the process.
    I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
    In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
    Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
    Thanks in advance.

  • Urgent issue, BW Data extraction

    Hi,
      I have an urgent issue and need help.
      We were loading data after activating business content. Every thing worked fine and the delta load was also smooth.
      However, in order to start everything fresh. I deleted all the info package, deleted the "Intialization option for the source system"  AND then created my infopackage for Full upload with initialize option.
      In this case the extractor didn't find any data. I though it will bring all the data and this behavious put me in difficult situation. Please note that till this time everything was working fine.
    We were looading data from datassource 0CRM_SALES_ORDER_I

    Hi Anurava,
    What do you mean by <i>"Full upload with initialize"</i>?
    I couldn't understand what exaclty you meant by I "deleted all the info package, deleted the "Intialization option for the source system" Are you saying you deleted the requests from your ODS/Cube?
    Regards
    SS

  • Very Very Urgent Issue: Restricted Key Figure does not return any data

    Hi all,
    Please help me solving this urgent issue.
    created customer exit variable on characterstics version and also
    other customer exit variable on Value type.
    I coded that in variable exit. Problem is when I include these in
    restrickted keyfigure My query does not return me any data.
    But if I remove from restrickted key firgure and put it as normal
    charaterstics I see the variable is getting populated.
    Also in RSRT the SQl generated when these are included in RKF is not
    correct.
    I debugged and know they are getting populated. As when included in RKF
    I can also see the values of customer exit variables from information
    tab.
    I also know that there is data in cube for those restrictions.
    I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
    FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
    Thanks
    SAP BW
    **Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

    Hi,
    Everyone out there this is very urgent. If someone can help me solving this problem.
    We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
    I posted one oss notes also regarding this issue. But got no reply from SAP.
    So, Please help me solving this issue.
    Thanks
    SAP BW

  • Data load issue with export data source - BW 3.5

    Hi,
    We are facing issues in loading data with the help of export data source.
    We have created export data source of 0PCA_C01 cube. With the help of this export datasource,  we are loading data to other custom cube. Scenario is working fine in development server.
    But when we transported objects to quality server data is not getting loaded to custom target cube.
    It is extracting zero records.  All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs.  Every object is active but data is not getting extracted.
    RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development.   We are in BW 3.5 with patch level 19.
    Please guide us to resolve the issue.
    Thanks,
    Aditya

    Hi
    Make sure that you have relevant Role & Authorization at Quality/PRS.
    You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
    Hope it helps and clear

  • How to put check box in a table format at the out put ?  Urgent issue...

    Hi,
    I am working an assignment to assign multiple roles for multiplr user.
    In selection screen we have to enter mutiple EMPNO from ..to
    1)  in second screen we will get the empno, First name, last name,  Position,
        From  date, To date, Sap user ID, Email id in the table formate with first
        column  with Check box.
    2) In second screen below the table I have to place the multiple roles just like in
       the step  loop format and below this one Execute button should be there.
    If we select the multiple employees or single employee and place the multiple roles or single roles and if I click the execute button then the multiple roles will be assigned to the multiple employees. The empno and roles will come from table and step loop to internal table and the same will pass to the BDC.
    For this requirement I prepered recording for Transaction PFCG. But I can't understand how to design the second screen that table format and the step loop format. Can anybody give any idea or any coding to design  the second screen.
    and how to meet the requirement. This is urgent issue. Good SDN points will be reworded.
    Witing for kind response.
    Thanks in advance.
    Bansidhar

    Hi upendra
    There are slight changes in the sivas code.Where is the data coming into the table.If its from a Model Node then iterate each element of the source node get that value compare and set the corresponding value in the element of the node binded to table.
    Create a boolean attribute "select" in the table node and bind it to checked property of the check box.
    for(int i=0;i<wdContext.node<tablenode>()..size();i++)
    if(wdContext.node<tablenode>().get<tablenode>ElementAt(i).select())
    wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(true);
    else
    wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(false);
    See the attribute is boolean so pass true or false as a values in setter methods.
    Regards
    Kalyan

  • Urgent Issue !!! Related to CJ20N

    Hi Guys,
    This is an Urgent Issue!!!!
    I have a requirement to upload the data .Initially they have created project definition and wbselement with the help of some data transfer technique later on they have added custom fields to this transaction.
    Now for the existing project and wbs element they want to update the values for the new custom fields .
    So can anybody suggest me how to approach this problem as this is my first requirement in PS.
    Points will be rewarded....
    Awaiting for your reply..
    Regards,
    Ravi Ganji

    You can use lsmw and do a recording to insert those new customer fields. LSMW can call bdc recording and you can enter the values there...

  • Urgent issue in user-exit

    hi friends,
    one urgent issue regarding user-exits;
    i have the requirement like this:
    if any one of these fields ZPBSTQTY2, ZPCSTQTY2, ZPBKTQTY2, ZPCKTQTY2 and ZPBFRQTY2 in table S505 is GT 0, then i need to pass a value 'X' to two flags present in that table.
    then i have to update it thru transaction VA01.
    Plz suggest some solution for this.
    Thanks
    Praveen

    SDAPO001 Activating Sourcing Subitem Quantity Propagation
    SDTRM001 Reschedule schedule lines without a new ATP check
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0001 Update the purchase order from the sales order
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    V45P0001 SD customer function for cross-company code sales
    V45S0001 Update sales document from configuration
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V46H0001 SD Customer functions for resource-related billing
    V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
    V45A0001 Determine alternative materials for product selection
    And also you can write your code in MV45AFZZ
    <b>Reward points</b>
    Regards

  • FI Extraction-Once a day

    Hi,
    How many times a day we can extract the FI data that is FI-GL,AR,AP for a day.
    I heard that we have to extract the FI delat data once  a day.
    Is there any specific reason for it.
    If i want to extarct more then once a day, is there any setting i have to do.
    Regards,
    Pratap
    Please search the forum before posting a thread. This has been discussed many times
    Edited by: Pravender on Jul 21, 2010 10:54 AM

    Hi Pratap,
    By Default, the FI (0FI_*_4) Extractors are configured to extract delta once a day. If you want to pull delta more than once in day, you have to configure Minute based Delta. You can refer this SAP Note for more information.
    Note 991429 - Minute Based extraction enhancement for 0FI_*_4 extractors
    Symptom
    You would like to implement a 'minute based' extraction logic for the data sources 0FI_GL_4, 0FI_AR_4 and 0FI_AP_4.
    Currently the extraction logic allows only for an extraction once per day without overlap.
    Reason and Prerequisites
    1. There is huge volume of data to be extracted on a daily basis from FI to BW and this requires lot of time.
    2. You would like to extract the data at a more frequent intervals in a day like 3-4 times in a day - without extracting all the data that you have already extracted on that day.
    In situations where there is a huge volume of data to be extracted, a lot of time is taken up when extracting on a daily basis. Minute based extraction would enable the extraction to be split into convenient intervals and can be run multiple times during a day. By doing so, the amount of data in each extraction would be reduced and hence the extraction can be done more effectively. This should also reduce the risk of extractor failures caused because of huge data in the system.
    The Note 1012874 may also be useful for you - FAQ FI extractors 0FI_AP_* 0FI_AR_* 0FI_GL_*(except 10)
    Hope this helps.
    Edited by: Hari Krishnan K on Jul 21, 2010 10:49 AM

  • Issue in getting data from popup?

    i hav created a popup window called simpleWindow, and a custom event to retrieve data from the popup called "popupMessage" in follwing way.
    simpleWindow.addEventListener("popupMessage",windowClose);
    In popup i call the dispatchEvent in following way
    var outgoingEvent:Event = new Event("popupMessage",false);
            dispatchEvent(outgoingEvent);
    but the event is not called?. what may be the issue?...

    Hi,
    To retrieve the data from the popup, you first need to create a custom class which wil be
    used to handle the events.
    I created the class as CustomEvents.as and then pass the data to the constructor of the
    class and the class look like as:
    package
    import flash.events.Event;
    public class CustomEvents extends Event
      public static const POPUPDATA:String = "popupMessage";
      public var data:*;
      public function CustomEvents(type:String,data:*)
       this.data = data;
       super(type);
    once this is done then suppose on close of a popup you want to send data then this would be
    done by creating object of this customEvents.as Class and passing the data u want to send.
    in this u can dispatch event like this:
    outgoingEvent = new CustomEvents(CustomEvents.POPUPDATA,textInput.text);
        dispatchEvent(outgoingEvent);
    Above code is in the popup class and the corresponding event listener for that is in the
    main class and which is like:
    popUp.addEventListener(CustomEvents.POPUPDATA,windowClose);
    Hopefully this will solve your problem and if nowt do let me know. and
    if you are able to solve the problem mark it as such

  • Re: Related to CJ20N Urgent Issue

    Hi Guys,
    This is an Urgent Issue!!!!
    I have a requirement to upload the data .Initially they have created project definition and wbselement with the help of some data transfer technique later on they have added custom fields to this transaction.
    Now for the existing project and wbs element they want to update the values for the new custom fields .
    So can anybody suggest me how to approach this problem as this is my first requirement in PS.
    Points will be rewarded....
    Awaiting for your reply..
    Regards,
    Ravi Ganji

    Hello,
    To update Customer fields in a WBS element you can use LSMW recording mode for Tx: CJ02
    Enter the WBS element definition on the initial screen and cheese 'enter'
    in the WBS element overview, choose first line and select from menu: ' Details -> <Customer Fields> (This is an exit and you may see a different text over here) and you see the customer fields. fill the values in the fields and save.
    Hope this helps. Also please close all your previous threads.
    Best Regards, Murugesh AS

  • Complex data type to application service create method(CRUD)(Urgent)

    Hi Experts,
    I have created an entity service with remote persistency(Web service).i am mapping the entity service CRUD methodes to web service methodes and i am calling these CRUD methodes form the corresponding applicaion service CRUD methodes.With out complex data types both sevices are working  fine.I have tested them in the service browser.
    Later I have created a complex data type in the entity service and mapped it to web service.But when i am creating the application service create(CRUD) method for this entity service the complex data type which i have created in the entity service is not being shown as possible input attributes of the application service create method.Due to this i am not able to pass this complex attribute form the application service create method to the entity service create method.
    Plz tell me how can i resilve this issue.(Urgent)
    Thanks
    Sampath.G

    Hi Sampath,
    Please check SAP note 1004108. I think the issue you describe is one of the limitations described in this note.
    Regards,
       Jan

  • Urgent Issue - Copy DTP and Process Chains in New Client Instance

    We have created new client Instance ( CLNT 510 ) based on our present client ( CLNT 500 ).
    We have all the process changes, application components from source system CLNT 500 and data ( both for master and transaction data ) in place for the CLNT 500.
    Now we need to use the CLNT 510 for our futher development. RFC connection has been established.
    Just want to know, do we need to create all the Application component trasfer , Transformation, DTP , Infopackages , Process chains again for the CLNT 510 data.
    please help.
    Thanks and Kind Regards,
    Pratap Gade.

    Hello Jr Roberto,
    Hello Jr Roberto,
    We have company implementing mutiple SAP Implementations in different countries.
    Client for BW Dev is 400.
    Source system for Client BWD :
    ECC Client ERP Dev - 500 ( for Holland Implementation )
    ECC Client EPR Dev - 510 ( for German Implementation  - Instance of ECC 500)
    We are completed with the Client 500 implementation.
    We are starting the german implementation and they have created a intance of Holland ECC Dev client 500 for german implementation with german data.
    Now they have setup 2 rfc connection in BWD 400.
    Also finally when they move to QAS client they are going to integrate the data of the both countries into one client.
    Presenlty I need to use ECC client 510 client for our german development.
    We have around 40 SAP BI reports in our first implementation. and around 10 in our second implementation.
    Just want to know, what are issues to be considered in loading master data ( will it overwrite the master data from the client 500, if i extract the master data from client 510 )...and all the other issues like can I copy all the process chains...etc  from client ECC 500 to ECC 510, without creating all transformation, DTP , Infopackages to load all the master from client 510 again.
    I need a broad understand on how to go about the development ...starting with Application Components transfer from source system Client 510 ....to report development. ( if possible using the already created objects....infopackages , DTP etc..)
    your help would be really appricated Mr Roberto.
    Thanks and Kind Regards,
    Shekar.

Maybe you are looking for