URGENT: Not able to Enqueu/Dequeue messages
Hi,
I am using Java Programming language to create Qs. I am trying to enqueue a message into the Q and I am not getting any error or exception. But when I check the Queue table for the message, I find no records in the table.
Any pointers as what is going wrong?
Quick response will be much appreciated.
Thanks,
Sunil
Many possible reasons:
- there was an error enqueueing (try to look more for log, maybe log is disabled? Are you using Log4J?)
- you didn't commit transaction
- your messages are already consumed
- you specify invalid queue name (for example, in PL/SQL, it's a good idea to specify queue name with owner prefix - like 'AQ.MW')
Myrra
Similar Messages
-
Urgent : not able to see any message on SXMB_MONI
Hi all ,
I have created a scenario XML->XI->SAP R3 for this i have cretaed data in integration repository and in along with interface object i have created 1 mesg maping( MT--->BAPI ) and and Interface Mapping using the same mesg mapping.
in integration directory i have created 2 communication channels one is of sender(adapter file) and other reciever ( adapter RFC ) and rest other things also .
but when i am checking in SXMB_MONI i am not getting any message i am unable to figure it out where i have done mistake . when i am checking in communication monitor Sender_File_Comm_channel is working fine and Receive_RFC_Comm_channel is showing this message in log :
Receiver channel 'RFC_Reciever' for party '', service 'BS_ACC_FLAT_R3' (internal name 'RfcClient[RFC_Reciever]')
Client data: {jco.client.lang=en, jco.client.snc_mode=0, jco.client.client=300, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=XXXXX, jco.client.sysnr=00, jco.client.ashost=XX.XX.XX.XX}
Repository data: {jco.client.lang=en, jco.client.snc_mode=0, jco.client.client=300, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=XXXXX, jco.client.sysnr=00, jco.client.ashost=XX.XX.XX.XX}
Current pool size: 0, maximum pool size : 1
is this communication channel is fine ?
please suggest how to check application is made correct or not ?
thanks in advance
Regards,
PraveenHello Praveen,
If I understand correctly the scenario is File -- XI -- RFC and you do not see any message in SXMB_MONI.
I would test the Sender File Adapter first before going to RFC. If the file is picked up and sent to Int Server you would see a corresponding message in SXMB_MONI.
I would first check the Sender File Comm Channel in Comm Channel Monitoring and ensure the file id being picked up.
In case this is not working you would get the exact error in the File Comm Channel. If this channel is working fine and you see a message id for the picked up file but the corresponding message Id is not available in SXMB_MONI, I would have a look at the queues if they are registered properly in SMQR or check if messages are stuck in any queue using SMQ1 and SMQ2 transactions. Please do the following steps and I am sure the scenario would work.
In case you find the problem and are not able to resolve it please post it here and I can suggest something.
Please award points if this post helps you.
Thanks and Best Regards,
Kanwal -
Not able to get the message from Queue using MQ adapter
HI
Using Mq adapter am able to put the message in a queue and am able to get the message if i select the schema type as opaque, but am not able to get the message if i specify any schema type and am getting timed out exception.
Kindly help to proceed with this issue.Hi,
Am also facing the same issue.
I would be thankful if anyone can provide the solution -
Not able to create a message from satellite system
Hello Everyone.
We have been working on Solution Manager .We have managed with successfull installation,Uploaded required support packages,configured the system according to SAP Solution Manager Guide.
Faced with some problem regarding support desk,we are not able to create a message from satellite system to Solution Manager.
Note : Error Message related to this problem is ....
<b>"Error in Local Message System : External number assignment, Enter notification num message was not Created."</b>
Thanks in advance.
Regards,
Nimesh V . MasterHi, you need to check the number ranges for the notifications and make sure they are correct. Look in the IMG of the SAP Solution Manager system for the instructions. You also need to make sure that the Service Desk BC Sets are activated if you are NOT on 4.0 and SP Stack 09+. In the later SPs much of this configuration from the IMG is automated in the wizard.
-
Not able to display error message in PR creation.
HI Experts,
In PR creation process i am not able to display error message.
BADI: ME_PROCESS_REQ_CUST
method : PROCESS_ACCOUNT, PROCESS_ITEM
I have used Include mm_messages_mac for handling error .
MESSAGE e112(XXX) WITH XX-XX. this is my error message.
even tried this also mmpur_message 'W' 'ZMM_PUR' '001' '' '' '' ''.
Please provide solution for this.
Regards,
JayantHi,
In devepoment system im able to display the message but not in quality,code is 100% algined with quality.
In quality system error message is being executed but not displayed,i mean control is comming out after the error message.
i am using
message EXXX(XXX).
regards,
Jayant. -
I only recieve n not able to send text messages,,plz help
i only recieve n not able to send text messages,,plz help
Try this: Go to Settings > General > Reset > Reset Network Settings. After that, check if you can already sends SMS
-
I installed a suggested update, now I am not able to send/receive messages. Any advice on how to fix this problem?
No third party apps, no signatures, we've cleared out contacts and are using just the numbers. She ended up dropping her phone and got a new one. She has a Galaxy S5, I'm still on my Lumia 928.
I did a live chat with someone here, based on her suggestions we both power off our phones, remove/replace simm cards, restart phones regularly and this issue is still occurring.
This issue ONLY happens with her, even when I'm at places that have horrible service, I receive messages/calls from everyone except her after I leave the trouble areas. My phone tells me she is receiving my messages when she claims she isn't, her phone tells her I am receiving her messages when I am not. -
I'm not able to send email messages because my send option is not highlighted
I'm not able to send email messages because my send option is not highlighted
It appears you might need a Yahoo plus account to utilize it as an SMTP server. The server address is plus.smtp.mail.yahoo.com
Other than that, I would contact Yahoo support directly. Ask them if they require password authentication. If they do, usually your e-mail address is your username. Often they require port 587, 2626, or 2662. Only Yahoo would know for certain which one to use. -
I am not able to send text messages to one particular person. Error comes back to enter a valid 10-digit phone number or short code. I have deleted this contact and re-entered numerous times and still get the same error code. Any ideas?
Are you entering a 10 digit number? Or, if it is not a North American number or you are not in North America, are you entering "+" followed by the country code and number?
-
Not able to send mms messages on iphone 4s
just activated my iphone 4s and am not able to send mms messages, i tried to send a picture and it will not go through. any suggestions?
http://support.apple.com/kb/ts2755
-
After upgrade to 7.1 not able to receive Text message
After upgrade my iphone 4 to IOS 7.1, I am not able to receive text message. I am able to send text message and also send and receive iMessage but not able to receive text message.
Hi ahiphone,
If you are having issues receiving text messages after updating to iOS 7.1, you may find the troubleshooting in the following article helpful:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Regards,
- Brenden -
Not able to send instant message through CLP
Hello All,
I am a beginner in portals.
I am doing a test assignment on collaboration.
1.I have enabled the Collaboration Launch Pad.
2.Now when I click on the link, CLP opens. I have added some contacts to it.
3.Then I tried to send an instant message and then I get the error:
Could not open a new instant-messaging session. All invitees are offline. Try again later.
I know that some configurations need to be done to be able to send the instant message.
Please let me know the configuration steps for the same or any relevant document.
Please help me with this.Hi Radhika
Please check the collaboration contacts is portal users.
Make sure that other portal user also logged in the portal for sending instance message.
OR you can try to loging with two differnet portal userid and try to use instant-messaging functinality by sending message.
[Instant Messenger |http://help.sap.com/erp2005_ehp_04/helpdata/EN/d3/9621af15024274afacfe874d5798b8/content.htm]
Hope it helps
Regards
Arun -
Urgent:Not able to login 11g EM console, Error "Login operation failed"
Hi Gurus,
I have Oralcle DB 11.1.0.7.0 setup on Solaris.
suddently the DB has gone down and i am not able to login to the Enterprise Manager console.
While login its giving the error "Login Operation Failed"
Please help me to ressolve this issue.
Thanks
KrishnaHere are the results of your commands:
HOME=/export/home/perfuser
LOGNAME=perfuser
MAIL=/var/mail//perfuser
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin
PWD=/export/home/perfuser/app/perfuser/product/11.1.0/db_1/bin
SHELL=/bin/csh
SSH_CLIENT=10.159.44.193 1266 22
SSH_CONNECTION=10.159.44.193 1266 64.181.147.61 22
SSH_TTY=/dev/pts/5
TERM=xterm
TZ=US/Mountain
USER=perfuser
uid=884(perfuser) gid=268(ccuser)
LSNRCTL for Solaris: Version 11.1.0.7.0 - Production on 21-AUG-2010 11:50:57
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Message 1053 not found; No message file for product=network, facility=TNSTNS-12541: Message 12541 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
TNS-00511: Message 511 not found; No message file for product=network, facility=TNS
Solaris Error: 146: Connection refused
LSNRCTL for Solaris: Version 11.1.0.7.0 - Production on 21-AUG-2010 11:51:09
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Message 1053 not found; No message file for product=network, facility=TNSTNS-12541: Message 12541 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
TNS-00511: Message 511 not found; No message file for product=network, facility=TNS
Solaris Error: 146: Connection refused -
Urgent:: Not able to open/lauch forms session
Hi All,
I had cloned our production instance to create a new instance.
But now I'm not able to open the form session. We are having apps 11.5.10.2.
The dbc file is perfect.. I even checked ICX parameters & related profile values.. seems to be ok..
I can login through /dev60cgi/f60cgi. But can not lauch forms from personal home page.
Can anyone plz suggect wht might be wrong?
Regards..
Edited by: user10200748 on Aug 30, 2008 10:25 PMHi Kali,
Thanks for the response.
I'm not getting any sort of error.. It just dont proceed after clicking the menus.. Even I try to check the error from java console, but even no errors are listed in it..
Moreover , I m getting successful AOLjtest run on the cloned instance.
The inputs I can give is -
The error_log shows -
[Sun Aug 31 07:19:54 2008] [error] [client 160.95.202.46] client denied by server configuration: /fh02/BON/oraapps/common/java/java
[Sun Aug 31 22:22:13 2008] [error] [client 160.95.202.46] client denied by server configuration: proxy:http://severname:8212/pls/BON/f
nd_icx_launch.launch
~
The access_log shows -
160.95.202.46 - - [31/Aug/2008:22:22:11 -0500] "GET /OA_HTML/RF.jsp?function_id=271&resp_id=20456&resp_appl_id=160&security_group_id=0&lang_code=US&oas=NvqKw
EsSQW1RppGR5XrWdw..&formsLink=yes HTTP/1.1" 302 376
lb57gpb1.ced.corp.cummins.com - - [31/Aug/2008:22:22:13 -0500] "GET /pls/BON/fnd_icx_launch.launch?resp_app=ALR&resp_key=ALERT_MANAGER&secgrp_key=STANDARD&s
tart_func=ALR_ALRALERT&other_params= HTTP/1.1" 403 240
~
Regards,
Edited by: user10200748 on Aug 31, 2008 8:36 PM -
I am not able to send/receive messages from one number intermittently.
I have a friend, who is also through Verizon, and we are both having issues being able to send/receive text messages to/from each other. I have no other issues with anyone else, only this one number. I have checked that both phones are running current updates, I have a Lumia 928, she has an Android phone I'm unfamiliar with. But we only have the issues with each other.
Any suggestions, please
Thanks
BobNo third party apps, no signatures, we've cleared out contacts and are using just the numbers. She ended up dropping her phone and got a new one. She has a Galaxy S5, I'm still on my Lumia 928.
I did a live chat with someone here, based on her suggestions we both power off our phones, remove/replace simm cards, restart phones regularly and this issue is still occurring.
This issue ONLY happens with her, even when I'm at places that have horrible service, I receive messages/calls from everyone except her after I leave the trouble areas. My phone tells me she is receiving my messages when she claims she isn't, her phone tells her I am receiving her messages when I am not.
Maybe you are looking for
-
In iPhoto if I select View, then Sort Photos by title, how do I stop it reverting to sorting by date when I close iPhoto and re-open it later?
-
i recently bought an album from itunes on my i pad but then i had to update my i pad so after every thing was done i try to redownload the album and icouldnt so what do i have to do to get that album back
-
Hi expert, I maked a modul pool ( se80 ) and i maked a dynpro. In this dynpro i putted a Input/Output field. It's run ok, but I would change it in select-options and not a simply I/O field. It's possible ? How ? Tks a lot, bye. <LOCKED BY MODERATOR -
-
Installation could not be completed
I'm having a problem installing snow leopard. After about 20 minutes of installing (1/4 complete) the installation stops and says in could not be completed. Provided is an installer log which shows the problem starting with: Sep 4 19:19:24 localhost
-
My files were deleted by cc from the cloud and from my mac
after trying to sync a pc to my creative cloud folder, almost all of my files were deleted from the cloud, and I cant acces the archive folder on the web.. i needed to restore all the files from my trash manually and now I hope that all the files are