URGENT : ransparent Gateway for RMS
Hi,
Where can i find the Transparent Gateway for RMS distrib. ?
Somewhere to download ?
Oracle 8.1.6 / OpenVMS (Compaq Alpha)
Thanks in advance
Alban
Thanks but,
where is the transparent gateways section ???
i can't find it :-(
i have the db instalation cd (9.2.0.1) and i started a custom instal so i can chhose the component but there is no transparent gateway for db2/as400
there is for sybase and sqlserver but not for the db2/as400.
also the instalation of this gateway needs to be on the as400 os.
i feel realy stupid that i can't find that thing
Similar Messages
-
Looking for RMS.jar Package
Hi,
This is Murthy i am looking for RMS.jar file [Java Package].
With the following classes...
import rms.RMSFile;
import rms.DictionaryFile;
import rms.rsrdds.DataDictionary;
import rms.RMSException;
If any one has any idea where i can get it....
or if you have it mail to me at:
[email protected]
It would be a very big favour....
It is Very Urgent...
Thanks in Advance,
Murthy RayuduAre you sure this is a publicly available JAR? I can't find it even mentioned somewhere on the web. What is it supposed to do?
-
Urgent help required for network configuration
sir
i have a mixed scenario right now.
I have only three computer on home network.
1.vista accer travelmate 4720 laptop loaded with vista sp1 ultimate
2.normal pc : Core2 duo with XFX ATI REDION graphics card and this pc is loaded with OEL 5.3.x linux but this pc has 2 NICs(eth 0,eth 1) I have connected both with a switch and the switch is connected to a modem for internet.can I use one NIC as private and another NIC as public to access internet?
3. normal pc : P4 HT and its loaded with win xp sp2 having eth 0
how to set my network.
I have connected each NIC with a D-Link switch.And the D-Link switch is connected with DataOne Nokia Siemens network c2110 modem.
But problems are that
1) each time i can connect only one PC at a time.
2)OEL 5.3.x is not connected to the specified modem ever....by [adsl seup|http://forums.oracle.com/forums/thread.jspa?threadID=832112&tstart=0] command.should i configure it during installation?is there any easy shell scriot avilable to do this stuff?
please help as soon as you can.......
regards
Edited by: mango_boy on Sep 7, 2009 4:44 AMifconfig output:
eth1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:243 (243.0 b) TX bytes:9406 (9.1 KiB)
Interrupt:16 Base address:0xec00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3779 errors:0 dropped:0 overruns:0 frame:0
TX packets:3779 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6124500 (5.8 MiB) TX bytes:6124500 (5.8 MiB)
virbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:8360 (8.1 KiB)
xenbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)adsl-setup output
[root@localhost ~]# adsl-setup
Welcome to the ADSL client setup. First, I will run some checks on
your system to make sure the PPPoE client is installed properly...
LOGIN NAME
Enter your Login Name (default root): kris_9929
INTERFACE
Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0): eth1
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
Enter the demand value (default no):
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: server
PASSWORD
Please enter your Password:
Please re-enter your Password:
USERCTRL
Please enter 'yes' (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes): yes
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
Choose a type of firewall (0-2): 1
Start this connection at boot time
Do you want to start this connection at boot time?
Please enter no or yes (default no):no
** Summary of what you entered **
Ethernet Interface: eth1
User name: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Activate-on-demand: No
DNS addresses: Supplied by ISP's server
Firewalling: STANDALONE
User Control: yes
Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0
Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets
(But first backing it up to /etc/ppp/chap-secrets.bak)
(But first backing it up to /etc/ppp/pap-secrets.bak)
Congratulations, it should be all set up!
Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'
to bring it down.
Type '/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0'
to see the link status.Edited by: mango_boy on Sep 7, 2009 9:02 AM
added adsl setup output
Edited by: mango_boy on Sep 7, 2009 9:15 AM -
Oracle optimizer and heterogeneous services (Transparent Gateway for ODBC)
Hi everyone!
We have the following configuration:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production.
Oracle Database Gateway for ODBC 11.2.0.2.0 on the same machine as Oracle DB.
Non-Oracle DB installed on a different hardware accessed through Oracle Gateway for ODBC via dblink.
Now, we have to query the remote non-Oracle system and retrieve some data. For the sake of brevity let's suppose we have the following table in our non-Oracle DB:
create table test (
ip_address varchar(15),
start_time datetime,
end_time datetime
And we run the following SQL query against the remote table on our Oracle DB:
SELECT start_time,end_time,ip_address
FROM remote_table@db_link
WHERE
end_time >= to_date('2011-10-11 00:00:00','rrrr-mm-dd hh24:mi:ss')
OR (
end_time IS NULL AND start_time >= to_date('2011-10-11 00:00:00','rrrr-mm-dd hh24:mi:ss')
AND start_time <= to_date('2011-10-12 00:00:00','rrrr-mm-dd hh24:mi:ss')
AND ip_address = '127.0.0.1';
But, having query monitoring on the remote DB enabled, we see that the actual query on the remote site looks like this:
SELECT "START_TIME","END_TIME","IP_ADDRESS"
FROM "REMOTE_TABLE"
WHERE "IP_ADDRESS"='127.0.0.1' AND "START_TIME"<=?
All references to END_TIME column are gone from WHERE clause for whatever reason.
However, Oracle execution plan shows us the following:
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |IN-OUT|
| 0 | SELECT STATEMENT | | 1 | 27 | 200 (0)| 00:00:03 | | |
|* 1 | FILTER | | 1 | 27 | 200 (0)| 00:00:03 | | |
| 2 | REMOTE | REMOTE_TABLE | | | | | DB_LINK | R->S |
Predicate Information (identified by operation id):
1 - filter("END_TIME">=TO_DATE('2011-10-11 00:00:00','rrrr-mm-dd hh24:mi:ss') OR
"END_TIME" IS NULL AND "START_TIME">=TO_DATE('2011-10-11 00:00:00','rrrr-mm-dd hh24:mi:ss'))
Remote SQL Information (identified by operation id):
2 - SELECT "END_TIME","IP_ADDRESS","START_TIME" FROM "REMOTE_TABLE" WHERE
"IP_ADDRESS"='127.0.0.1' AND "START_TIME"<=:1 (accessing 'DB_LINK' )
This actually means that Oracle CBO decided that it will apply filter on END_TIME column after having retrieved the data from the remote site. We don't want this behaviour but have no idea how to affect execution plan in this case.
So, the question is: How can we force Oracle CBO to not change the initial query and pass it to the remote site "as is"? Is there any way we can achieve this goal?
Edited by: user12024904 on 28-Oct-2011 04:05Hi,
Our Oracle DB and Gateway are running on the following system:
HP-UX B.11.31 U ia64
The following SQL code is executed in SQLPlus:
SELECT start_time,end_time,ip_address
FROM ip_acc_complete@gr_link
WHERE
END_TIME >= to_date('2010-10-21 00:00:00','rrrr-mm-dd hh24:mi:ss')
OR (
END_TIME is null AND START_TIME >= to_date('2010-10-21 00:00:00','rrrr-mm-dd hh24:mi:ss')
AND START_TIME <= to_date('2010-10-22 00:00:00','rrrr-mm-dd hh24:mi:ss')
AND IP_ADDRESS = '127.0.0.1';
Gateway debug trace shows the following:
Oracle Corporation --- TUESDAY NOV 01 2011 14:59:15.254
Heterogeneous Agent Release
11.2.0.2.0
Oracle Corporation --- TUESDAY NOV 01 2011 14:59:15.254
Version 11.2.0.2.0
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "ON"
HOSGIP for "HS_FDS_SHAREABLE_NAME" returned "/usr/local/greenwich64/lib/libodbc.so.1"
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using query as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
SQL text from hgopars, id=1, len=117 ...
00: 53454C45 43542022 454E445F 54494D45 [SELECT "END_TIME]
10: 222C2249 505F4144 44524553 53222C22 [","IP_ADDRESS","]
20: 53544152 545F5449 4D452220 46524F4D [START_TIME" FROM]
30: 20224950 5F414343 5F434F4D 504C4554 [ "IP_ACC_COMPLET]
40: 45222057 48455245 20224950 5F414444 [E" WHERE "IP_ADD]
50: 52455353 223D2731 32372E30 2E302E31 [RESS"='127.0.0.1]
60: 2720414E 44202253 54415254 5F54494D [' AND "START_TIM]
70: 45223C3D 3F [E"<=?]
Deferred open until first fetch.
Performing delayed open.
The non-Oracle DB is CopperEye Retrieval Server with its own custom ODBC driver.
CopperEye query log shows that the following query is received from Oracle Gateway:
01/11/2011 14:26:31 - NEW QUERY :
SELECT "END_TIME","IP_ADDRESS","START_TIME" FROM "IP_ACC_COMPLETE" WHERE "IP_ADDRESS"='127.0.0.1' AND "START_TIME"<=?
which complies with the information in Oracle Gateway trace file.
So, it seems that it's Oracle DB decision to split the original WHERE clause into two parts, delegate one part to the remote site, retrieve the data and then apply the remaining filter locally. -
Error fetching data from a foxpro db using Oracle Gateway for ODBC
Hi.
I have an 10.2.0.1 database an a 11.2.0 Oracle Gateway for ODBC installed and configured.
The dblink test works fine, I can connect with the foxpro database because if I execute desc centros I can see the
columns of table centros.
The problem comes when I try to execute Select * from centros@fox1;
A syntax error is returned ([Microsoft][ODBC Visual FoxPro Driver]Syntax error. {42000,NativeErr = 200})
I paste down the output of the trace file with HS_FDS_TRACE_LEVEL=255
If I run select codcen from centros@fox1; another error is shown. Tell me if you want the other trace file.
select codcen from centros@fox1
ERROR en lÝnea 1:
ORA-00904: "CODCEN": identificador no vßlido
Oracle Corporation --- JUEVES MAY 31 2012 13:11:24.765
Heterogeneous Agent Release
11.2.0.1.0
Oracle Corporation --- JUEVES MAY 31 2012 13:11:24.750
Version 11.2.0.1.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "255"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "UCS2"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "TRUE"
setting HS_FDS_SUPPORT_STATISTICS to default of "FALSE"
Parameter HS_FDS_QUOTE_IDENTIFIER is not set
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
Default value of 32 assumed for HS_FDS_SQLLEN_INTERPRETATION
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
Exiting hgosdip, rc=0
ORACLE_SID is "DAVID"
Product-Info:
Port Rls/Upd:1/0 PrdStat:0
Agent:Oracle Database Gateway for ODBC
Facility:hsa
Class:ODBC, ClassVsn:11.2.0.1.0_0008, Instance:DAVID
Exiting hgogprd, rc=0
hostmstr: 2057416704: HOA After hoagprd
hostmstr: 2057416704: HOA Before hoainit
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=1000
HOCXU_DB_CSET=178
HOCXU_SEM_VER=102000
Entered hgolofn at 2012/05/31-13:11:25
Exiting hgolofn, rc=0 at 2012/05/31-13:11:25
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
Invalid value of 32 given for HS_FDS_SQLLEN_INTERPRETATION
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2012/05/31-13:11:25
hostmstr: 2057416704: HOA After hoainit
hostmstr: 2057416704: HOA Before hoalgon
Entered hgolgon at 2012/05/31-13:11:25
reco:0, name:SYSTEM, tflag:0
Entered hgosuec at 2012/05/31-13:11:25
Exiting hgosuec, rc=0 at 2012/05/31-13:11:25
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using SYSTEM as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2012/05/31-13:11:25
HS_FDS_CONNECT_INFO = "Prueba_Foxpro"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2012/05/31-13:11:25
dsn:Prueba_Foxpro, name:SYSTEM
optn:
Entered hgocip at 2012/05/31-13:11:25
dsn:Prueba_Foxpro
Exiting hgocip, rc=0 at 2012/05/31-13:11:25
##>Connect Parameters (len=39)<##
## DSN=Prueba_Foxpro;
#! UID=SYSTEM;
#! PWD=*
Exiting hgogenconstr, rc=0 at 2012/05/31-13:11:25
Entered hgopoer at 2012/05/31-13:11:26
hgopoer, line 233: got native error 0 and sqlstate 01000; message follows...
[*Microsoft][Administrador de controladores ODBC] El controlador no admite una versión de ODBC distinta de la que la necesita la aplicación (vea SQLSetEnvAttr)*. {01000}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:26
hgocont, line 2686: calling SqlDriverConnect got sqlstate 01000
Entered hgolosf at 2012/05/31-13:11:26
ODBC Function-Available-Array 0xFFFE 0x00FF 0xFF00 0xAA7F 0x03B3 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0xEE00 0x395C
Exiting hgolosf, rc=0 at 2012/05/31-13:11:26
DriverName:VFPODBC.DLL, DriverVer:06.86.0001
DBMS Name:Visual FoxPro, DBMS Version:03.00.0000
Exiting hgocont, rc=0 at 2012/05/31-13:11:26 with error ptr FILE:hgocont.c LINE:2686 ID:SQLDriverConnect
Entered hgopoer at 2012/05/31-13:11:26
hgopoer, line 233: got native error 0 and sqlstate HYC00; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Driver not capable {HYC00}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:26
hgolgon, line 795: calling SQLGetInfo got sqlstate HYC00
SQLGetInfo returns N for SQL_CATALOG_NAME
Exiting hgolgon, rc=0 at 2012/05/31-13:11:26 with error ptr FILE:hgolgon.c LINE:795 ID:GetInfo: Support catalogs
hostmstr: 2036506624: HOA After hoalgon
RPC Calling nscontrol(0), rc=0
hostmstr: 2036506624: RPC Before Upload Caps
hostmstr: 2036506624: HOA Before hoaulcp
Entered hgoulcp at 2012/05/31-13:11:26
Entered hgowlst at 2012/05/31-13:11:26
Exiting hgowlst, rc=0 at 2012/05/31-13:11:26
SQLGetInfo returns 0x0 for SQL_OWNER_USAGE
TXN Capable:1, Isolation Option:0x2
SQLGetInfo returns 0 for SQL_MAX_SCHEMA_NAME_LEN
SQLGetInfo returns 128 for SQL_MAX_TABLE_NAME_LEN
SQLGetInfo returns 0 for SQL_MAX_PROCEDURE_NAME_LEN
SQLGetInfo returns ` (0x60) for SQL_IDENTIFIER_QUOTE_CHAR
SQLGetInfo returns Y for SQL_COLUMN_ALIAS
16 instance capabilities will be uploaded
capno:1964, context:0x00000000, add-info: 0
capno:1989, context:0x00000000, add-info: 0
capno:1991, context:0x0001ffff, add-info: 0
capno:1992, context:0x0001ffff, add-info: 1, translation:"`"
capno:3042, context:0x00000000, add-info: 0, translation:"42"
capno:3047, context:0x00000000, add-info: 0, translation:"57"
capno:3049, context:0x00000000, add-info: 0, translation:"59"
capno:3050, context:0x00000000, add-info: 0, translation:"60"
capno:3066, context:0x00000000, add-info: 0
capno:3067, context:0x00000000, add-info: 0
capno:3068, context:0x00000000, add-info: 0
capno:3069, context:0x00000000, add-info: 0
capno:3500, context:0x00000001, add-info: 91, translation:"42"
capno:3501, context:0x00000001, add-info: 93, translation:"57"
capno:3502, context:0x00000001, add-info: 107, translation:"59"
capno:3503, context:0x00000001, add-info: 110, translation:"60"
Exiting hgoulcp, rc=0 at 2012/05/31-13:11:26
hostmstr: 2036506624: HOA After hoaulcp
hostmstr: 2036506624: RPC After Upload Caps
hostmstr: 2036506624: RPC Before Upload DDTR
hostmstr: 2036506624: HOA Before hoauldt
Entered hgouldt at 2012/05/31-13:11:27
NO instance DD translations were uploaded
Exiting hgouldt, rc=0 at 2012/05/31-13:11:27
hostmstr: 2036506624: HOA After hoauldt
hostmstr: 2036506624: RPC After Upload DDTR
hostmstr: 2036506624: RPC Before Begin Trans
hostmstr: 2036506624: HOA Before hoabegn
Entered hgobegn at 2012/05/31-13:11:27
tflag:0 , initial:1
hoi:0x12f094, ttid (len 54) is ...
00: 54455354 2E524547 52455353 2E524442 [TEST.REGRESS.RDB]
10: 4D532E44 45562E55 532E4F52 41434C45 [MS.DEV.US.ORACLE]
20: 2E434F4D 2E663033 63383037 372E392E [.COM.f03c8077.9.]
30: 34342E37 3735 [44.775]
tbid (len 10) is ...
0: 09002C00 07030000 0104 [..,.......]
Exiting hgobegn, rc=0 at 2012/05/31-13:11:27
hostmstr: 2036506624: HOA After hoabegn
hostmstr: 2036506624: RPC After Begin Trans
hostmstr: 2036506624: RPC Before Describe Table
hostmstr: 2036506624: HOA Before hoadtab
Entered hgodtab at 2012/05/31-13:11:27
count:1
table: CENTROS
Entered hgopdsc at 2012/05/31-13:11:27
Describing procedure CENTROS
Output hoada
hgopdsc, line 1426: NO hoada to print
Exiting hgopdsc, rc=942 at 2012/05/31-13:11:27
The hoada for table CENTROS follows...
hgodtab, line 904: NO hoada to print
Exiting hgodtab, rc=0 at 2012/05/31-13:11:27
hostmstr: 2036506624: HOA After hoadtab
hostmstr: 2036506624: RPC After Describe Table
hostmstr: 2036506624: RPC Before SQL Bundling
hostmstr: 2036506624: HOA Before hoxpars
Entered hgopars, cursor id 1 at 2012/05/31-13:11:27
type:0
SQL text from hgopars, id=1, len=23 ...
00: 53454C45 4354202A 2046524F 4D202243 [SELECT * FROM "C]
10: 454E5452 4F5322 [ENTROS"]
Exiting hgopars, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624: HOA After hoxpars
hostmstr: 2036506624: RPC After SQL Bundling
hostmstr: 2036506624: RPC Before SQL Bundling
hostmstr: 2036506624: HOA Before hoxopen
Entered hgoopen, cursor id 1 at 2012/05/31-13:11:28
hgoopen, line 87: NO hoada to print
Deferred open until first fetch.
Exiting hgoopen, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624: HOA After hoxopen
hostmstr: 2036506624: HOA Before hoxdscr
Entered hgodscr, cursor id 1 at 2012/05/31-13:11:28
Allocate hoada @ 023E983C
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]*Descriptor type out of range* {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:1(codcen): dtype:1 (CHAR), prc/scl:8/0, nullbl:0, octet:8, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:2(litcen): dtype:1 (CHAR), prc/scl:45/0, nullbl:0, octet:45, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:3(codpos): dtype:1 (CHAR), prc/scl:5/0, nullbl:0, octet:5, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:4(codprov): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:5(codmun): dtype:1 (CHAR), prc/scl:3/0, nullbl:0, octet:3, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:6(codecol): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:7(codesin): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:8(cb): dtype:1 (CHAR), prc/scl:4/0, nullbl:0, octet:4, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:9(cs): dtype:1 (CHAR), prc/scl:4/0, nullbl:0, octet:4, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:10(digitocon): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:11(cuenta): dtype:1 (CHAR), prc/scl:10/0, nullbl:0, octet:10, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopcda at 2012/05/31-13:11:28
Column:12(solar): dtype:2 (NUMERIC), prc/scl:5/0, nullbl:0, octet:10, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopcda at 2012/05/31-13:11:28
Column:13(construido): dtype:2 (NUMERIC), prc/scl:5/0, nullbl:0, octet:10, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:14(domicen): dtype:1 (CHAR), prc/scl:40/0, nullbl:0, octet:40, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:15(telef): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:16(fax): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:17(cif): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:18(litloc): dtype:1 (CHAR), prc/scl:30/0, nullbl:0, octet:30, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
hgodscr, line 910: Printing hoada @ 023E983C
MAX:18, ACTUAL:18, BRC:100, WHT=5 (SELECT_LIST)
hoadaMOD bit-values found (0x200:TREAT_AS_CHAR)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
1 CHAR N 8 8 0/ 0 0 0 200 codcen
1 CHAR N 45 45 0/ 0 0 0 200 litcen
1 CHAR N 5 5 0/ 0 0 0 200 codpos
1 CHAR N 2 2 0/ 0 0 0 200 codprov
1 CHAR N 3 3 0/ 0 0 0 200 codmun
1 CHAR N 2 2 0/ 0 0 0 200 codecol
1 CHAR N 2 2 0/ 0 0 0 200 codesin
1 CHAR N 4 4 0/ 0 0 0 200 cb
1 CHAR N 4 4 0/ 0 0 0 200 cs
1 CHAR N 2 2 0/ 0 0 0 200 digitocon
1 CHAR N 10 10 0/ 0 0 0 200 cuenta
3 DECIMAL N 7 7 5/ 0 0 0 0 solar
3 DECIMAL N 7 7 5/ 0 0 0 0 construido
1 CHAR N 40 40 0/ 0 0 0 200 domicen
1 CHAR N 11 11 0/ 0 0 0 200 telef
1 CHAR N 11 11 0/ 0 0 0 200 fax
1 CHAR N 11 11 0/ 0 0 0 200 cif
1 CHAR N 30 30 0/ 0 0 0 200 litloc
Exiting hgodscr, rc=0 at 2012/05/31-13:11:28 with error ptr FILE:hgodscr.c LINE:615 ID:Transfer Octet Length
hostmstr: 2036506624: HOA After hoxdscr
hostmstr: 2036506624: RPC After SQL Bundling
hostmstr: 2036506624: RPC Before SQL Bundling
hostmstr: 2036506624: HOA Before hoxclse
Entered hgoclse, cursor id 1 at 2012/05/31-13:11:28
Exiting hgoclse, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624: HOA After hoxclse
hostmstr: 2036506624: HOA Before hoadafr
Entered hgodafr, cursor id 1 at 2012/05/31-13:11:28
Free hoada @ 023E983C
Exiting hgodafr, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624: HOA After hoadafr
hostmstr: 2036506624: HOA Before hoxpars
Entered hgopars, cursor id 1 at 2012/05/31-13:11:28
type:0
SQL text from hgopars, id=1, len=235 ...
00: 53454C45 43542041 312E2263 6F646365 [SELECT A1."codce]
10: 6E222C41 312E226C 69746365 6E222C41 [n",A1."litcen",A]
20: 312E2263 6F64706F 73222C41 312E2263 [1."codpos",A1."c]
30: 6F647072 6F76222C 41312E22 636F646D [odprov",A1."codm]
40: 756E222C 41312E22 636F6465 636F6C22 [un",A1."codecol"]
50: 2C41312E 22636F64 6573696E 222C4131 [,A1."codesin",A1]
60: 2E226362 222C4131 2E226373 222C4131 [."cb",A1."cs",A1]
70: 2E226469 6769746F 636F6E22 2C41312E [."digitocon",A1.]
80: 22637565 6E746122 2C41312E 22736F6C ["cuenta",A1."sol]
90: 6172222C 41312E22 636F6E73 74727569 [ar",A1."construi]
A0: 646F222C 41312E22 646F6D69 63656E22 [do",A1."domicen"]
B0: 2C41312E 2274656C 6566222C 41312E22 [,A1."telef",A1."]
C0: 66617822 2C41312E 22636966 222C4131 [fax",A1."cif",A1]
D0: 2E226C69 746C6F63 22204652 4F4D2022 [."litloc" FROM "]
E0: 43454E54 524F5322 204131 [CENTROS" A1]
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 200 and sqlstate 42000; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Syntax error. {42000,NativeErr = 200}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgopars, line 457: calling SQLPrepare got sqlstate 42000
Exiting hgopars, rc=28500 at 2012/05/31-13:11:28 with error ptr FILE:hgopars.c LINE:487 ID:Prepare stmt
hostmstr: 2036506624: HOA After hoxpars
hostmstr: 2036506624: RPC After SQL BundlingThe first issue I see is that Oracle 10.2.0.1 was never certified with DG4ODBC 11. Only 10.2.0.4 or 10.2.0.5 can be used as the Oracle database HS kernel requires a gateway compatibility patch and this patch is included in 10.2.0.4 or 10.2.0.5 Oracle database patch set.
Then another error in the trace is that for each column description you have an error:
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]*Descriptor type out of range* {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
It seems it is not critical as DG4ODBC continues, but a more detailed analysis would require an ODBC trace.
When looking at the table description it seems the column names are all in lower letters, for example: solar. So commonly Dg4ODBC needs to quote the names
00: 53454C45 43542041 312E2263 6F646365 [SELECT A1."codce]
10: 6E222C41 312E226C 69746365 6E222C41 [n",A1."litcen",A]
20: 312E2263 6F64706F 73222C41 312E2263 [1."codpos",A1."c]
30: 6F647072 6F76222C 41312E22 636F646D [odprov",A1."codm]
40: 756E222C 41312E22 636F6465 636F6C22 [un",A1."codecol"]
50: 2C41312E 22636F64 6573696E 222C4131 [,A1."codesin",A1]
60: 2E226362 222C4131 2E226373 222C4131 [."cb",A1."cs",A1]
70: 2E226469 6769746F 636F6E22 2C41312E [."digitocon",A1.]
80: 22637565 6E746122 2C41312E 22736F6C ["cuenta",A1."sol]
90: 6172222C 41312E22 636F6E73 74727569 [ar",A1."construi]
A0: 646F222C 41312E22 646F6D69 63656E22 [do",A1."domicen"]
B0: 2C41312E 2274656C 6566222C 41312E22 [,A1."telef",A1."]
C0: 66617822 2C41312E 22636966 222C4131 [fax",A1."cif",A1]
D0: 2E226C69 746C6F63 22204652 4F4D2022 [."litloc" FROM "]
E0: 43454E54 524F5322 204131 [CENTROS" A1]
and according to the trace the FoxPro ODBC driver doesn't like these quotes and reports a syntax error.
So this explains at least why select codcen from centros@fox1 will fail. In general the Oracle database is case insensitive and translates all object names to upper case and the select it will pass to the foreign database would be similar to:
select CODCEN from CENTROS => which will fail as FoxPro is case sensitive. So the error message ORA-00904 (missing column name) is correct and the statement you need to use is:
select "codcen" from centros@fox1;
But this might lead again to the Syntax error you got earlier => You need to check which sign (single quote, back tick, double quote) Foxpro uses to quote object names and then set the gateway parameter HS_FDS_QUOTE_IDENTIFIER accordingly.
To check which character can be used to quote column/table names you might use the Microsoft ODBc test utility which was distributed in the old MDAC 2.8:
http://www.microsoft.com/downloads/details.aspx?familyid=5067faf8-0db4-429a-b502-de4329c8c850&displaylang=en
Edited by: kgronau on Jun 1, 2012 7:27 AM
If you know where I can download the MS FoxPro ODBC driver, please let me know and I'll check. -
Gateway for informix: Unsupported Informix Server and other errors
I set up the Database Gateway for Informix on WinXP 32 to connect from an Oracel 10gR2 Database to an Informix Database (Infomix Online Dynamic Server V7.31UP1).
The basic connection seems to work (giving a wrong password in the database link results in an appropriate error message), but the test-statement "select * from DUAL@DLTEST" (and any other select) results in the following error message:
>>>>>>>>>>>>>>>>>
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Oracle][ODBC Informix Wire Protocol driver]Unsupported Informix Server
version.[Oracle][ODBC Informix Wire Protocol driver]Invalid attribute in
connection string: ArraySize.[Oracle][ODBC Informix Wire Protocol
driver]Invalid attribute in connection string: TruncateOversizedColumnValues.
ORA-02063: preceding 2 lines from DLTEST
<<<<<<<<<<<<<<<<<
Setting HS_FDS_TRACE_LEVEL=DEBUG gives the following trace-output in <oracle_home>\dg4ifmx\trace\dg4ifmx_agt_2716.trc:
>>>>>>>>>>>>>>>>>>>
Oracle Corporation --- MONTAG JUN 09 2008 13:59:13.671
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- MONTAG JUN 09 2008 13:59:13.671
Version 11.1.0.6.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
HOSGIP returned value of "straf" for HS_FDS_RECOVERY_ACCOUNT
HOSGIP returned a value for HS_FDS_RECOVERY_PWD
setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL16UTF16"
setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics"
Exiting hgosdip, rc=0
ORACLE_SID is "dg4ifmx"
Product-Info:
Port Rls/Upd:6/0 PrdStat:0
Agent:Oracle Database Gateway for INFORMIX
Facility:hsa
Class:IFMX, ClassVsn:11.1.0.6.0_0006, Instance:dg4ifmx
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=2000
HOCXU_DB_CSET=46
HOCXU_SEM_VER=100000
Entered hgolofn at 2008/06/09-13:59:14
RC=-1 from HOSGIP for "PATH"
PATH from environment is "D:\oracle_11g\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\Programme\jdk1.4\bin;d:\programme\GTK\2.0\bin;"D:\Programme\Hummingbird\Connectivity\7.00\Accessories\";d:\Tools\GTK_2.0\bin;d:\tools\IsoBuster"
Exiting hgolofn, rc=0 at 2008/06/09-13:59:14
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
Exiting hgoinit, rc=0 at 2008/06/09-13:59:14
Entered hgolgon at 2008/06/09-13:59:14
reco:0, name:straf, tflag:0
Entered hgosuec at 2008/06/09-13:59:14
uencoding=UTF16
Entered shgosuec at 2008/06/09-13:59:14
Exiting shgosuec, rc=0 at 2008/06/09-13:59:14
shgosuec() returned rc=0
Exiting hgosuec, rc=0 at 2008/06/09-13:59:14
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "straf"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using straf as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2008/06/09-13:59:15
HS_FDS_CONNECT_INFO = "sijus10000:22231/si10000onl/kwadbstr"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2008/06/09-13:59:15
dsn:sijus10000:22231/si10000onl/kwadbstr, name:straf
optn:
Entered shgogohn at 2008/06/09-13:59:15
ohn is 'OraGtw11g'
Exiting shgogohn, rc=0 at 2008/06/09-13:59:15
Entered hgocont_OracleCsidToIANA at 2008/06/09-13:59:15
Returning 2252
Exiting hgocont_OracleCsidToIANA at 2008/06/09-13:59:15
##>Connect Parameters (len=299)<##
## DRIVER=Oracle 11g dg4ifmx-OraGtw11g;
## HostName=sijus10000;
## PortNumber=22231;
## ServerName=si10000onl;
## Database=kwadbstr;
#! UID=straf;
#! PWD=*
## ApplicationUsingThreads=1;
## CancelDetectInterval=0;
## TrimBlankFromIndexName=1;
## IANAAppCodePage=2252;
## ArraySize=100;
## UseDelimitedIdentifier=1;
## TruncateOversizedColumnValues=0;
Exiting hgogenconstr, rc=0 at 2008/06/09-13:59:15
Entered hgopoer at 2008/06/09-13:59:15
hgopoer, line 159: got native error 0 and sqlstate HY000; message follows...
[Oracle][ODBC Informix Wire Protocol driver]Unsupported Informix Server version.[Oracle][ODBC Informix Wire Protocol driver]Invalid attribute in connection string: ArraySize.[Oracle][ODBC Informix Wire Protocol driver]Invalid attribute in connection string: TruncateOversizedColumnValues.
Exiting hgopoer, rc=0 at 2008/06/09-13:59:15
hgocont, line 1890: calling SqlDriverConnect got sqlstate HY000
Exiting hgocont, rc=28500 at 2008/06/09-13:59:15 with error ptr FILE:hgocont.c LINE:1910 ID:Something other than invalid authorization
Exiting hgolgon, rc=28500 at 2008/06/09-13:59:15 with error ptr FILE:hgolgon.c LINE:612 ID:Calling hgocont
Entered hgoexit at 2008/06/09-13:59:15
Exiting hgoexit, rc=0 at 2008/06/09-13:59:15
<<<<<<<<<<<<<<<<<<<<<<<<
What's going wrong ?
Regards KlausHello,
I downloaded the gateway package of Oracle version 11.1.0.6.0, and installed Informix gateway driver. I made the necessary settings, and i have exactly the same problem, as described above.
I receive error message "OracleODBC Informix Wire Protocol driverUnsupported Informix Server version.OracleODBC Informix Wire Protocol driverInvalid attribute in connection string: ArraySize.OracleODBC Informix Wire Protocol driverInvalid attribute in connection string: TruncateOversizedColumnValues." when trying to set up a connection from Oracle to Informix 7.3. I read here, that there is a patch of Informix gateway: fix 6799360, which is unfortunately not available for for download for Windows XP. I cannot search MetaLink for this problem, because I just would like to test this Oracle feature, I did not buy Oracle license.
Does anybody know about this patch? Can anybody help how could I make working this Informix gateway?
Thanks for help, Gyula -
Groupwise 7 Gateway for Exchange
I am testing the Novell Groupwise Gateway for Exchange SP2. I have already tested the API Gateway but wanted to try the newer version because it will be supported for awhile. I downloaded the install and went through all the instructions. I am using Groupwise 7.0.1 and Exchange 2003. The install went fine and the configurations are correct but I must be missing something. When I go to start the Gateway Application it starts then stops. I checked on the GW MTA and it says the link is Closed. The reason the link it closed it says can't create directories. I checked the Gateway application and it shows Groupwise link closed and other link Open. I logged into a ws as the same user to check the rights and I was able to create a new directory in the domain directory. I changed the logging to verbose on the Exchange Gateway to see if I can see an error and it says trying to re-establish GW link.
03-11-08 10:17:53 0 Begin Configuration Information
03-11-08 10:17:53 0 Platform= Windows 2003 (TM) Version 5.2 (Build 3790) Serv
ice Pack 2
03-11-08 10:17:53 0 Domain and gateway= VMDomain.Exchange_Gateway1
03-11-08 10:17:53 0 Foreign Name= <none specified>
03-11-08 10:17:53 0 Description= <none specified>
03-11-08 10:17:53 0 Alias Type= Exchange
03-11-08 10:17:53 0 Root Directory= \\VMNW65\data\VMDOMAIN\wpgate\Exchange_Ga
teway1
03-11-08 10:17:53 0 Work Directory= \\VMNW65\data\VMDOMAIN\wpgate\Exchange_Ga
teway1\000.prc\gwwork
03-11-08 10:17:53 0 Log File= \\VMNW65\data\VMDOMAIN\wpgate\Exchange_Gateway1
\000.prc\0311log.001
03-11-08 10:17:53 0 Directory ID= exc367d
03-11-08 10:17:53 0 Directory Synchronization= NO
03-11-08 10:17:53 0 Directory Exchange= NO
03-11-08 10:17:53 0 Accounting= YES
03-11-08 10:17:53 0 Access Control= NO
03-11-08 10:17:53 0 Convert GroupWise Status to Messages= NO
03-11-08 10:17:53 0 Outbound Status Level= OPEN
03-11-08 10:17:53 0 Log Level= Verbose
03-11-08 10:17:53 0 Log Max Age= 7 days
03-11-08 10:17:53 0 Log Max Space= 1024 kb
03-11-08 10:17:53 0 Enable Recovery= YES
03-11-08 10:17:53 0 Retry Count= 10
03-11-08 10:17:53 0 Retry Interval= 60 seconds
03-11-08 10:17:53 0 Failed Recovery Wait= 3600 seconds
03-11-08 10:17:53 0 Network Reattach Command= <none specified>
03-11-08 10:17:53 0 Correlation DB Enabled= YES
03-11-08 10:17:53 0 Correlation DB Age= 14 days
03-11-08 10:17:53 0 Correlation DB Directory= \\VMNW65\data\VMDOMAIN\wpgate\E
xchange_Gateway1
03-11-08 10:17:53 0 Send/Receive Cycle= 2 minutes
03-11-08 10:17:53 0 Minimum Run= 0 minutes
03-11-08 10:17:53 0 Idle Sleep Duration= 30 seconds
03-11-08 10:17:53 0 Snap Shot Interval= 10 minutes
03-11-08 10:17:53 0 Time Zone= PST
03-11-08 10:17:53 0 GMT Offset= -8 hours, 0 minutes
03-11-08 10:17:53 0 Hemisphere= NORTH
03-11-08 10:17:53 0 Daylight Saving Change= 1 hours, 0 minutes
03-11-08 10:17:53 0 Daylight Saving Begin= 4/6 (month/day)
03-11-08 10:17:53 0 Daylight Saving End= 10/26 (month/day)
03-11-08 10:17:53 0 Procedure ID= 000
03-11-08 10:17:53 0 SNMP On
03-11-08 10:17:53 0 Gateway Build Timestamp: Wednesday, April 25, 2007 15:30:38
03-11-08 10:17:53 0 GWIN.DLL Build Timestamp: Wednesday, April 25, 2007 15:32:2
4
03-11-08 10:17:53 0 GWOUT.DLL Build Timestamp: Wednesday, April 25, 2007 15:33:
50
03-11-08 10:17:53 0 Startup Switches= /Home-\\VMNW65\data\VMDOMAIN\wpgate\Exc
hange_Ga
03-11-08 10:17:53 0 teway1 /rt-1 /st-1 /group /Custom /appl
03-11-08 10:17:53 0 End Configuration Information
03-11-08 10:17:54 0 Checking the correlation DB
03-11-08 10:17:54 0 Correlation DB check complete
03-11-08 10:17:54 0 The gateway is attempting to reestablish the GroupWise linkThe gateway directory has to be in less that 8 chars, or at least 8.3...
On Netware the agents have this restriction.
Morris
cnakagaw wrote:
> I am testing the Novell Groupwise Gateway for Exchange SP2. I have
> already tested the API Gateway but wanted to try the newer version
> because it will be supported for awhile. I downloaded the install and
> went through all the instructions. I am using Groupwise 7.0.1 and
> Exchange 2003. The install went fine and the configurations are correct
> but I must be missing something. When I go to start the Gateway
> Application it starts then stops. I checked on the GW MTA and it says
> the link is Closed. The reason the link it closed it says can't create
> directories. I checked the Gateway application and it shows Groupwise
> link closed and other link Open. I logged into a ws as the same user to
> check the rights and I was able to create a new directory in the domain
> directory. I changed the logging to verbose on the Exchange Gateway to
> see if I can see an error and it says trying to re-establish GW link.
>
>
> 03-11-08 10:17:53 0 Begin Configuration Information
> 03-11-08 10:17:53 0 Platform= Windows 2003 (TM) Version 5.2 (Build
> 3790) Serv
> ice Pack 2
> 03-11-08 10:17:53 0 Domain and gateway= VMDomain.Exchange_Gateway1
> 03-11-08 10:17:53 0 Foreign Name= <none specified>
> 03-11-08 10:17:53 0 Description= <none specified>
> 03-11-08 10:17:53 0 Alias Type= Exchange
> 03-11-08 10:17:53 0 Root Directory=
> \\VMNW65\data\VMDOMAIN\wpgate\Exchange_Ga
> teway1
> 03-11-08 10:17:53 0 Work Directory=
> \\VMNW65\data\VMDOMAIN\wpgate\Exchange_Ga
> teway1\000.prc\gwwork
> 03-11-08 10:17:53 0 Log File=
> \\VMNW65\data\VMDOMAIN\wpgate\Exchange_Gateway1
> \000.prc\0311log.001
> 03-11-08 10:17:53 0 Directory ID= exc367d
> 03-11-08 10:17:53 0 Directory Synchronization= NO
> 03-11-08 10:17:53 0 Directory Exchange= NO
> 03-11-08 10:17:53 0 Accounting= YES
> 03-11-08 10:17:53 0 Access Control= NO
> 03-11-08 10:17:53 0 Convert GroupWise Status to Messages= NO
> 03-11-08 10:17:53 0 Outbound Status Level= OPEN
> 03-11-08 10:17:53 0 Log Level= Verbose
> 03-11-08 10:17:53 0 Log Max Age= 7 days
> 03-11-08 10:17:53 0 Log Max Space= 1024 kb
> 03-11-08 10:17:53 0 Enable Recovery= YES
> 03-11-08 10:17:53 0 Retry Count= 10
> 03-11-08 10:17:53 0 Retry Interval= 60 seconds
> 03-11-08 10:17:53 0 Failed Recovery Wait= 3600 seconds
> 03-11-08 10:17:53 0 Network Reattach Command= <none specified>
> 03-11-08 10:17:53 0 Correlation DB Enabled= YES
> 03-11-08 10:17:53 0 Correlation DB Age= 14 days
> 03-11-08 10:17:53 0 Correlation DB Directory=
> \\VMNW65\data\VMDOMAIN\wpgate\E
> xchange_Gateway1
> 03-11-08 10:17:53 0 Send/Receive Cycle= 2 minutes
> 03-11-08 10:17:53 0 Minimum Run= 0 minutes
> 03-11-08 10:17:53 0 Idle Sleep Duration= 30 seconds
> 03-11-08 10:17:53 0 Snap Shot Interval= 10 minutes
> 03-11-08 10:17:53 0 Time Zone= PST
> 03-11-08 10:17:53 0 GMT Offset= -8 hours, 0 minutes
> 03-11-08 10:17:53 0 Hemisphere= NORTH
> 03-11-08 10:17:53 0 Daylight Saving Change= 1 hours, 0 minutes
> 03-11-08 10:17:53 0 Daylight Saving Begin= 4/6 (month/day)
> 03-11-08 10:17:53 0 Daylight Saving End= 10/26 (month/day)
> 03-11-08 10:17:53 0 Procedure ID= 000
> 03-11-08 10:17:53 0 SNMP On
> 03-11-08 10:17:53 0 Gateway Build Timestamp: Wednesday, April 25, 2007
> 15:30:38
> 03-11-08 10:17:53 0 GWIN.DLL Build Timestamp: Wednesday, April 25,
> 2007 15:32:2
> 4
> 03-11-08 10:17:53 0 GWOUT.DLL Build Timestamp: Wednesday, April 25,
> 2007 15:33:
> 50
> 03-11-08 10:17:53 0 Startup Switches=
> /Home-\\VMNW65\data\VMDOMAIN\wpgate\Exc
> hange_Ga
> 03-11-08 10:17:53 0 teway1 /rt-1 /st-1 /group /Custom /appl
> 03-11-08 10:17:53 0 End Configuration Information
> 03-11-08 10:17:54 0 Checking the correlation DB
> 03-11-08 10:17:54 0 Correlation DB check complete
> 03-11-08 10:17:54 0 The gateway is attempting to reestablish the
> GroupWise link
>
> -
Oracle gateway for Oracle 10g DB on Windows 64 bit server
Is there any place that I can find Oracle dateway for Oracle 10g DB on Windows 64 bit server? I can only find Gateway for Oracle 11g on Windows 32 bit server. Please help me to identify this. Thanks.
yingkuan:
Thanks a lot. The link tells the details. It seems that Oracle has not release Gateway for Oracle database 10.2.0.x on Windows 64 bit server. Probably they don't do it.
So under this circumstance, if I want to install Gateway (32 bit) on Oracle 10.2.0.3 DB on Windows 64 bit server for Teradata, I probably have to install Gateway software in another Oracle Home, then configure it right. Please give more advice on this. 32 bit Gateway will work for 64 bit database? -
Problem with "Database Gateway for SQL Server"
Hello,
i am testing the different technologies for connecting an oracle database with a sql-server database.
The way using 10g-generic-connectivity with ODBC works fine, but the 11g-DG4MSQL makes problems.
Environment:
Server PEGASUS (32bit Windows Server 2003 R2 SP2) with Oracle Database 10g Release 10.2.0.4.0
Server OBELIXUS (32bit Windows 2000 Sp4) with MS-SQL-Server 2005
On PEGASUS i have installed the gateway in a new oracle home directory:
"D:\oracle\product\10.2.0\db_1" => home directory of 10g
"D:\oracle\product\11.1.0\tg_1\" => home directory of the gateway
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora:
MSSQLDG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = DG4MSQL)
(HS = OK)
MSSQL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = MSSQLTEST)
(HS = OK)
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = INTEGRAT)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = INTEGRAT)
(SID_DESC =
(SID_NAME = MSSQLTEST)
(PROGRAM = D:\oracle\product\10.2.0\db_1\bin\hsodbc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_DESC=
(SID_NAME=DG4MSQL)
(ORACLE_HOME=D:\oracle\product\11.1.0\tg_1)
(PROGRAM=D:\oracle\product\11.1.0\tg_1\BIN\dg4msql)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1521))
D:\oracle\product\11.1.0\tg_1\dg4msql\admin\initDG4MSQL.ora:
HS_FDS_CONNECT_INFO=OBELIXUS/MSSQLSERVER/testuju
HS_FDS_TRACE_LEVEL=DEBUG
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
D:\oracle\product\10.2.0\db_1\hs\admin\initMSSQLTEST.ora:
HS_FDS_CONNECT_INFO=DSN_MSSQL
HS_FDS_TRACE_LEVEL=OFF
HS_LANGUAGE=AMERICAN_AMERICA.WE8MSWIN1252
HS_FDS_FETCH_ROWS=100
HS_RPC_FETCH_REBLOCKING=OFF
How mentioned above, the access from oracle to sqlserver using MSSQL(10g hsodbc.exe) works fine.
But when trying to acces the sqlserver using MSSQLDG (11g dg4msql.exe) I get the following error:
ORA-28500: Verbindung von ORACLE zu Fremdsystem gab diese Nachricht zurück:
[Oracle][ODBC SQL Server Driver][DBNETLIB]Ungültige Verbindung.
[Oracle][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (ParseConnectParams()).
[Oracle][ODBC SQL Server Driver]Ungültiges Attribut für die Verbindungszeichenfolge
ORA-02063: vorherige 2 lines von DBL_MSSQL4
Here the contect of the file "DG4MSQL_agt_2332.trc":
Oracle Corporation --- FREITAG AUG 22 2008 16:17:42.198
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- FREITAG AUG 22 2008 16:17:42.198
Version 11.1.0.6.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
HOSGIP returned value of "RECOVER" for HS_FDS_RECOVERY_ACCOUNT
HOSGIP returned a value for HS_FDS_RECOVERY_PWD
setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL16UTF16"
setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics"
Exiting hgosdip, rc=0
ORACLE_SID is "DG4MSQL"
Product-Info:
Port Rls/Upd:6/0 PrdStat:0
Agent:Oracle Database Gateway for MSSQL
Facility:hsa
Class:MSSQL, ClassVsn:11.1.0.6.0_0006, Instance:DG4MSQL
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=2000
HOCXU_DB_CSET=178
HOCXU_SEM_VER=102000
Entered hgolofn at 2008/08/22-16:17:42
RC=-1 from HOSGIP for "PATH"
PATH from environment is "d:\oracle\product\11.1.0\tg_1\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Programme\IBM\Informix\Client-SDK\bin"
Exiting hgolofn, rc=0 at 2008/08/22-16:17:43
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
Exiting hgoinit, rc=0 at 2008/08/22-16:17:43
Entered hgolgon at 2008/08/22-16:17:43
reco:0, name:testuju, tflag:0
Entered hgosuec at 2008/08/22-16:17:43
uencoding=UTF16
Entered shgosuec at 2008/08/22-16:17:43
Exiting shgosuec, rc=0 at 2008/08/22-16:17:43
shgosuec() returned rc=0
Exiting hgosuec, rc=0 at 2008/08/22-16:17:43
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using testuju as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2008/08/22-16:17:43
HS_FDS_CONNECT_INFO = "OBELIXUS/MSSQLSERVER/testuju"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2008/08/22-16:17:43
dsn:OBELIXUS/MSSQLSERVER/testuju, name:testuju
optn:
Entered shgogohn at 2008/08/22-16:17:43
ohn is 'OraGtw11g_home1'
Exiting shgogohn, rc=0 at 2008/08/22-16:17:43
Entered hgocont_OracleCsidToIANA at 2008/08/22-16:17:43
Returning 2252
Exiting hgocont_OracleCsidToIANA at 2008/08/22-16:17:43
##>Connect Parameters (len=223)<##
## DRIVER=Oracle 11g dg4msql-OraGtw11g_home1;
## SERVER=OBELIXUS\MSSQLSERVER;
## Database=testuju;
#! UID=testuju;
#! PWD=*
## AnsiNPW=Yes;
## QuotedId=Yes;
## IANAAppCodePage=2252;
## ArraySize=100;
## PadVarbinary=0;
## SupportNumericPrecisionGreaterThan38=1;
Exiting hgogenconstr, rc=0 at 2008/08/22-16:17:44
Entered hgopoer at 2008/08/22-16:18:00
hgopoer, line 159: got native error 14 and sqlstate 08001; message follows...
[Oracle][ODBC SQL Server Driver][DBNETLIB]Ungültige Verbindung.[Oracle][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (ParseConnectParams()).[Oracle][ODBC SQL Server Driver]Ungültiges Attribut für die Verbindungszeichenfolge
Exiting hgopoer, rc=0 at 2008/08/22-16:18:00
hgocont, line 1890: calling SqlDriverConnect got sqlstate 08001
Exiting hgocont, rc=28500 at 2008/08/22-16:18:00 with error ptr FILE:hgocont.c LINE:1910 ID:Something other than invalid authorization
Exiting hgolgon, rc=28500 at 2008/08/22-16:18:00 with error ptr FILE:hgolgon.c LINE:612 ID:Calling hgocont
Entered hgoexit at 2008/08/22-16:18:00
Exiting hgoexit, rc=0 at 2008/08/22-16:18:00
Many thanks in advance for any help!
Regards HartmutAt first your configuration is not really correct.
=====================================================
In the LISTENER.ORA from 10g, you must only refer to the database and hsodbc 10g
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = INTEGRAT)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = INTEGRAT)
(SID_DESC =
(SID_NAME = MSSQLTEST)
(PROGRAM = D:\oracle\product\10.2.0\db_1\bin\hsodbc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1521))
===========================================================
Then you have to create a new listener (new name) in the gateway oracle_home on a different port than instance database:
D:\oracle\product\11.1.0\tg_1\network\admin\listener.ora
SID_LIST_LISTENERGTW =
(SID_LIST =
(SID_DESC=
(SID_NAME=DG4MSQL)
(ORACLE_HOME=D:\oracle\product\11.1.0\tg_1)
(PROGRAM=D:\oracle\product\11.1.0\tg_1\BIN\dg4msql)
LISTENERGTW=
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1522))
To start it, use the command below:
D:\oracle\product\11.1.0\tg_1\bin\LSNRCTL start listenergtw
===========================================================
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora:
match the DG4MSQL with the listener on 1522 port
HSODBC match with binary10g on listener 1521 port
MSSQLDG =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1522))
(CONNECT_DATA =(SERVICE_NAME = DG4MSQL))
(HS = OK)
MSSQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =(SERVICE_NAME = MSSQLTEST))
(HS = OK)
Try to configure and let me know your feedback
regards,
Mireille -
Oracle 9i on LINUX Transparent Gateway for SQL Server
Does anybody know if there is a Transparent Gateway available for Oracle 9i on LINUX to connect to SQL Server? I have run the installer and cannot seem to find the install options for any Transparent Gateways. I am familiar with their location in the universal installer as I have installed the Oracle/SQL Server Transparent Gateway with Oracle in WinNT. Perhaps Transparent Gateways for Oracle/LINUX are not available?
Thanks in advance.I have the same issue - we want to upgrade our 9.2 to 10g Linux, and need to maintain connectivity to some legacy sqlserver databases. I can't find any mention of tg4msql for linux. What gives? Anyone know the answer to this? thanks, michael
-
SharePoint 2013 and SAP connectivity / SAP Gateway for Microsoft and Duet Enterprise 2.0
Hello,
we are investigating the connection possibilities of SharePoint 2013 with SAP.
The basic scenario in our cases involves the transfer of documents and/or metadata from SharePoint to SAP possibly through a Workflow in SharePoint.
From my research the most promising official (no 3d-party) interfaces that can be used are the Duet Enterprise 2.0 and the SAP Gateway for Microsoft.
From my understanding both interfaces allow only the consumption of Data from SAP to SharePoint and not vice versa. Moreover the interoperability of documents seems not be supported. Are CRUD operations from a SharePoint native lists to SAP supported?
Can someone please clarify this topics?
I have found lots of documentation concerning the interfaces but not a clear answer to this questions.
Many thanks in advance!
IoannisHi Ioannis,
It seems that there is no built in method to get data from SharePoint list in SAP.
As a workaround, we can export SharePoint list to excel and then use that spread sheet as a source data in SAP.
http://scn.sap.com/thread/3467263
http://scn.sap.com/thread/3472110
As this issue is regarding to SAP, I recommend you to ask the question in the SAP:
http://scn.sap.com/welcome.
More experts will assist you, then you will get more information relation to SAP.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
Where can i find a wap gateway for linux?
where can i find a wap gateway for linux?
thanks itzikYou can visit website http://www.kannel.org, it's a opensource wap gateway but it;s written in C language, the JAVA sourcecode is comming soon
-
Third Party Payment Gateway for Physical Services
I am very curious to learn on the validity of Integrating a Third Party Payment Gateway for offering the Physical services to the app users.
One of my clients need to integrate a Payment Gateway for the User registration where the User's will be offered to play a physical shooting game upon registration with the app. What is the likelihood of the app rejection in this kind of scenario ?Hi Ahmed,
I don't understand what exactly you need to do on your CSS because, from what you explained, the original URL and the second one are the same, and both requests are even done using SSL.
Can you be more specific on what are your requirements?
Daniel -
Link to downlaod GW Gateway for Exchange v7.03 or earlier
I use the GroupWise Gateway for Exchange 7.02 4/25/2007 which crash frequently. I does not find earlier versions from the public support.novell website.
Could you please send me the link to download or the package directly which run without crash ?
Thanks a lot
Mail : [email protected]vellard,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Invalid column name for Transparent Gateway for SQLServer
I have successfully set up a transparent gateway for an MS SQLServer database 'pubs' from Oracle 910. I am able to run the following statement successfully as it returns all results without a hitch:
select * from authors@pubs;
pubs is the database link for the transparent gateway.
But when I select any particular column in the select statement like:
select city from authors@pubs;
I get the following error:
select city from authors@pubs
ERROR at line 1:
ORA-00904: invalid column name
Can anyone help me with this?
ThanksSamarjit,
This should work. Are you using a certified configuration?
Check our certification matrix at http://otn.oracle.com/products/gateways/pdf/certmatrix2.pdf
Vira
Maybe you are looking for
-
If I get the APP & send in my iPod b4 the second year,do I have to pay s&h?
I got my 5th gen iPod last May and the battery is already dead. I haven't gotten the AppleCare Protection Plan (APP) yet but if I get it and then send my iPod in for a new battery directly after I start my APP(before the second year starts), do I sti
-
Initial install of LC ES4 did have pdf preview and it worked for a couple wks. Now I can't get the tab back. I've read the blogs-followed the instructions to resolve-but have yet to get pdf preview tab I've uninstalled/reinstalled Acrobat XI Pro and
-
Need to select just part of a frame
Hi everyone I'm trying to select just part of a frame in order to higlight it overshadowing the rest. How could I do it? Thank you in advance! By the way. I'm using FCE 4.0, not HD, I guess.
-
Backing up the BB messenger contact list not available
In the old versions of Blackberry, we had the option to backup the BB messenger contact list to the device, the media card, or remotely to an email. However, this feature is not available in the new BB Z10 !!!!! This feature is significant and necess
-
Right aligning a label in a jpanel
Hey not quite sure how to do this. public MenuApp() super("Hello World!"); setSize(400, 300); setDefaultCloseOperation(DISPOSE_ON_CLOSE); Container cp = getContentPane(); JMenu mnuFile = new JMenu("File"); mnuFile.add(f_