Urgent!! Sum function for subtotals.,Exporting BA does not list Workbooks

Hi,
I m facing this issue when calculating subtotals in the report. When i use the sum function, the subtotals are not getting displayed. I tried usin the Cell Sum Distinct function and it sums up only if the amounts are different. For example when i have two amounts of 5.00 each, it sums as 5.00 only in the subtotal. Can anyone help me resolve this?
Also, i m facing one more issue. When i export the BA, the user wants the list of workbooks under that that would be exported. (The list is shown when exporting the EUL as such), but the list is just blank in BA export. Is this a set up issue?
Thanks in advance.

Hi,
Not all calculations can be summed correctly by Discoverer. What is the calculation that you are trying to sum?
The workbooks are not tied to a BA as the folders used in a workbook may be in many different BAs. Therefore the workbooks are not exported with a business area. The workbooks must be exported separately.
Rod West

Similar Messages

  • I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all. Can someone help?

    I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all, including the one in question. Can someone help?

    Okay, I've sussed it.  I saw a link to another discussion that hadn't turned up in any of my searches before I posted the question above.
    My Tosh HDD was formatted to FAT 32 and therefore would not be backed up by Time Machine.  I removed all data from it - nightmare as I hadn't enough space to put it on the macbook HDD, but, after trawling through numerous photos and deleting rubbish for hours, I finally made enough space and copied all data across.  Then, after clearing the data from the Tosh HDD, I used disk utilitity to reformat it to Mackintosh OS Extended.  Chose the option without kournalling because I'm not baking up onto this disk and so don't need it - according to some other discussions I found.
    When it was done I check on time machine in system prefs and once I selected options, I was able to remove it from the excluded from backups list.  Hey presto.  Now I'm moving my photo library and my music library onto the Tosh HDD and my macbook should start to breath again.  Hurray.

  • What is the advantage of exporting mpeg-dvd vs mpeg for dvd if mpeg does not need to transcode audio

    What is the advantage of exporting mpeg-dvd vs mpeg for dvd if mpeg does not need to transcode audio and also burns to dvd?

    The MPEG2-DVD preset also produces a DVD spec-legal file.  If you use the generic MPEG2 preset, you can too easily create an out-of-spec file that will have to be re-transcoded by En.
    Jeff

  • Exported Video Does Not Look Right

    I am sure this is a basic setting I am overlooking, but a lot of this is new to me - any help would be GREATLY appreciated.
    My goal is to create a high quality 640x480 movie for Computer/Web viewing only.
    • I shot a short video using a Canon Vixia HV30 to mini DV tape using the SD standard - no problem. I guess that records at 720x480 non-square pixels at 29.97fps - is that right?
    • I used log and capture inside of FCP v6.0.5 to capture the various clips I needed - no problem (I don't think). If I open each of those clips from the finder in Quicktime they look "pretty" good, but a bit of aliasing on the diagonals and somewhat blurry, but not sure why? Everything looks sharp on the smaller camera LCD screen? and looks pretty good inside of FCP on the Canvas? If I open one of these captures directly inside of Quicktime and do a get info, it says...
    DV 720x480 (640x480)
    FPS: 29.95
    Normal Size: 640x480 pixels
    Current Size: 640x480 pixels (Actual)
    All these Quicktime movies appear slightly larger in height and width than the same clips when viewed in the FCP Canvas?
    If I open the Sequence Settings in FCP it says...
    Frame Size 720 x 480 NTSC DV (3:2)
    Pixel Aspect Ratio NTSC - CCIR 601 /DV (720x480)
    Field Dominance: None
    Editing Timebase: 29.97
    Everything looked pretty good inside FCP so I Exported a QT Movie using "Current Settings". Then opened the resulting self-contained movie in QT and it looks pretty bad. When I get info in QT on the rendered final movie it reads...
    DV 720x480 (640x480)
    FPS: 29.97
    Normal Size: 720x480 pixels
    Current Size: 640x480 pixels (Actual)
    So... the FPS and the Normal Size are not the same as the captured original clips.
    Can anyone tell me what I am doing wrong?
    Is this just the wrong Sequence Settings, Export Settings or do I have to start over an re-capture all my footage some other way?
    PS - I am assuming that the DV Camcorder is recording interlaced (60 fields) rather than progressive - is that right. Do I need to de-interlace the video somehow?
    Message was edited by: ChoreoGraphics

    I'm far from being an expert, but since no one has replied to you yet, and because I've been helped out here plenty of times, I'll post something and who knows -- it may be the answer.
    Your post was really long but from what I can gather, you're wondering why your exported video does not look good when you open it in QuickTime. Try this: Open the video in QT, hit command-J, then click on Video Track, then at the bottom right (under Visual Settings) you'll see High Quality, Single Field, and Deinterlace. Click around on those to see if that improves what you see.

  • The search function in the itunes store does not work.  It will accept a request and suggest searches but then it locks up and will not search.  Clicking on the magnifying glass or a suggested search does nothing.  Re-installing itunes has not helped.

    The search function in the itunes store does not work.  It will accept a request and suggest searches but then it locks up and will not search.  Clicking on the magnifying glass or a suggested search does nothing.  Re-installing itunes has not helped.

    everything you stated here is exactly what i have done and have got nowhere. i have windows 7 64 bit on a hp 8 g of ram desktop. im also looking for help

  • Text ID for text object BUT000 does not exist

    Hi Experts.
    I am doing data migration using LSMW with IDoc. I have this error message "Text ID for text object BUT000 does not exist" when processing the IDoc.
    Can anyone tell me what is this error about and how could i fix it. A step by step guide would be nice. Really need advice urgently.
    I'll definitely rewards points.
    Regards,
    Julianna

    for this u need to maintain the text object and its related text id using the TC: SM31 in rel. view of  ur tcode( like MM01, Va01 etc).
    first get the view names(1 for text object and 2 for text id) from fun. people.
    then go to sm31 with 1 view, create BUT000 .
    then go to sm31 with 2 view, maintain text id for the text object:BUT000.

  • In OS Yosemite the search function in Mail, Finder, Spotlight- does not work

    MacBook Pro (Retina, 15-inch, Late 2013)
    2,6 GHz Intel Core i7
    16 GB 1600 MHz DDR3
    NVIDIA GeForce GT 750M 2048 MB
    OS Yosemite,
    Finder versión 10.10.1
    Mail Versión 8.1 (1993)
    In OS Yosemite the search function in Mail, Finder, Spotlight… does not work. Messages or documents with the search criteria are there and one could find them manually, but the search function fails to find them. Following advice from Apple Support (728965377):
    1. I applied an Apple protocol for adware removal (Remove unwanted adware that displays pop-up ads and graphics on your Mac); I had none, because I had formally utilized a similar protocol that I had found in Internet, actually an app that implemented automatically Apple's adware removal protocol.
    2. I rebuild the post boxes in Mail (Mail (Yosemite): Reconstruir buzones); It took a while but it functioned properly
    3. I re-install the System (OS X Yosemite: Reinstalar OS X); It took about 4 hours but there was no problem whatsoever with the installation.
    Afterwards I searched for messages in Mail, and documents in Finder and Spotlight, without any difficulty. The search function in all of them was working properly. But the next time that I needed to search messages or documents, an hour later or so, the problem reappear and a couple of new issues occurred:
    1. in app RagTime 6.5.2 (Build 1821), www.ragtime.de, the menu bar disappears (it is invisible), when one performs certain operations, e. g., calculating a value with a formula, whether it is in a spreadsheet or some other component (text, drawing, etc.). After touching with the cursor the menu bar is visible again.
    2. after reading an e-mail in Mail or copying an address, this is seeing as a floating object in the finder and over every application. There is no logical way to get rid of the floating object and neither copying or deleting or cutting it. It is not a big issue but nonetheless bothersome.
    3. In Mail, messages with Flag or in VIP contacts cannot be seen in the appropriate folders, only in the Incoming mail folder, together with other messages. It seems to me, this issue is part of same search function problem.
    4. The preview function within Mail does not show the attached documents to a message, whether it is in the IN, OUT or Draft boxes.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try again to re-index Spotlight. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

  • Acrobat Pro "save as" function in the file menu does not show the current directory of the file

    I have installed CC but Acrobat Pro gives me headaches.
    The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
    It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
    I use Windows7 professional 64bits.

    I use what seems to be the latest version available on the Cloud:
    To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
    So here it is, open:
    When I do a "Save as", it takes me to a totally different place on the disk!
    Very annoying...
    Thanks for your time!
    JJ

  • Hi,When I submit the budget for approval, it is approved and base lined when we submit it for approval. It does not go in approval hierarchy. We want it to flow through approval hierarchy.

    Hi,When I submit the budget for approval, it is approved and base lined when we submit it for approval. It does not go in approval hierarchy. We want it to flow through approval hierarchy.

    Hi Amit,
    if I understand correctly, you just need for a particular object a tooltip to be showed.
    There is no such functionality hence you used the trick of using a hyperlink, which if clicked generates undesired behavior.
    Hyperlinks don't allow themselves to be disabled, therefore if you are using that workaround you must cope with that.
    I would suggest to create an Idea at [https://ideas.sap.com] for having in the properties of an object a tooltip, then post the link to the idea here and other users will vote if they like the idea.
    Thanks and regards,
    Simone

  • The search function on my "sent" mail does not work - can anyone help?

    The search function on my "sent" mail does not work. When I type in more than two letters into the saerch box - the sent mail screen goes blank. Any ideas how to fix this? Apple technical support has not been much help for the past five days...

    As this is the forum for the MacBook Pro hardware, your question will be better answered in the OS X Snow Leopard forum where the Mail app is discussed.

  • ORA-04042: procedure, function, package, or package body does not exist

    getting following error
    I have logged on as sys
    GRANT EXECUTE ON CTXSYS.CTX_DDL TO public
    ERROR at line 1:
    ORA-04042: procedure, function, package, or package body does not exist
    does it need Oracle text installed
    comp_name
    Oracle Database Catalog Views
    Oracle Database Packages and Types
    Oracle Workspace Manager
    JServer JAVA Virtual Machine
    Oracle XDK
    Oracle Database Java Packages
    Oracle Expression Filter
    Oracle XML Database
    Oracle Rules Manager
    Oracle Multimedia
    Oracle Real Application Clusters

    912919 wrote:
    getting following error
    I have logged on as sys
    GRANT EXECUTE ON CTXSYS.CTX_DDL TO public
    ERROR at line 1:
    ORA-04042: procedure, function, package, or package body does not exist
    does it need Oracle text installed
    comp_name
    Oracle Database Catalog Views
    Oracle Database Packages and Types
    Oracle Workspace Manager
    JServer JAVA Virtual Machine
    Oracle XDK
    Oracle Database Java Packages
    Oracle Expression Filter
    Oracle XML Database
    Oracle Rules Manager
    Oracle Multimedia
    Oracle Real Application Clustersit worked for me.
    09:10:19 SQL> GRANT EXECUTE ON CTXSYS.CTX_DDL TO public;
    Grant succeeded.
    09:10:23 SQL>

  • When Firefox is open the zoom function (option/command/space bar) does not work in Adobe programs (InDesign, Photoshop, Illustrator)

    Mac OS X 10.6.7
    CS 5.5
    When Firefox is open the zoom function (option/command/space bar) does not work in Adobe programs (InDesign, Photoshop, Illustrator). This happens only when Firefox is open and when I close it the zoom functions work fine again without having to restart the applications.
    This is intermittent but happens quite frequently each day if Firefox is active.

    MDN doesn't mention -chrome being used for ordinary web pages: https://developer.mozilla.org/docs/Mozilla/Command_Line_Options#Chrome
    When I use
    firefox.exe -chrome about:permissions
    I get a usable window, but zoom doesn't work as you noted.
    How about using an intermediate page and window.open() for the target page? You can (mostly) restrict the chrome of windows opened that way, but it will leave behind the intermediate window...
    https://developer.mozilla.org/docs/Web/API/Window.open

  • The 'c' XUSER key for the DBM user does not exist or could not be identified

    Hello members,
    I am getting this message  'The 'c' XUSER key for the DBM user does not exist or could not be identified' in SUM preparation phase while upgrading SOLMAN from 7.01 to 7.1
    Does anyone has any idea on this. What steps need to be followed for this.
    My DB is MaxDB.
    Thanks,
    Srikanth

    Hello,
    Figured out the problem. Actually SAP System was moved from actual server to Virtual machine on the server. In this process some of the DB configuration got corrupted. And this activity was done by one of our previous employee.
    Since this was a standalone system, I took backup of all current configuration and uninstalled SAP and installed new Solman 7.1 SPS12. Issue is resolved now.
    Best Regards,
    Srikanth
    Solman Upgrade from 7.01 to 7.1 stuck in Extraction-PREP_EXTRACT/BEGIN_PRE phase 

  • I want to transfer a movie I have downloaded from itunes to my new IPAD. I have been on the itunes help menu, it tells me to look under 'devices' tab for IPAD. BUT there is no 'devices' tab and it does not list my new IPAD. Help!

    I want to transfer a movie I have bought in itunes to my new IPAD. I have been trying to work how to do this for 3 days now. I have accessed all the itunes help and forums and wiki online. They all tell me to go to the DEVICES tab on itunes and select IPAD then sync. YUP seem simple, BUT there is not DEVICES tab listed on my itunes and it does not list IPAD. Years ago I set up my IPOD no problem and that is listed, but not the new IPAD. Can anyone help? I would love to be able to actually watch films on my IPAD!! thanks

    If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
    If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
    Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

  • Text ID  for text object MATERIAL does not exist - MM01

    Hi All,
    I am getting below error message when trying to save Material Master in MM01.
    Text ID  for text object MATERIAL does not exist
    Message no. TD603
    Diagnosis
    You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
    Procedure
    You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
    The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
    I have searched the forums but couldn't get relevant message.
    Please assist.
    Thanks,
    Raj

    Hi Jurgen,
    This is the complete message i am getting.
    Text ID for text object MATERIAL does not exist
    Message no. TD603
    Diagnosis
    You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
    Procedure
    You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
    The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
    If I enter MM02 and without changing anything if i save still i get this error message.
    Thanks & Regards,
    Raj

Maybe you are looking for