Urxvtc gives EOF error when changing SSD to laptop

I am going abroad for a few months and I'm taking my laptop replacing its HDD with my desktop's SSD.
graphics driver is the same (ati), and I changed the lm_sensors file for the laptop's one.
The only problem I have is urxvtd giving segmentation fault. It doesn't happen on my desktop with the same disk.
Here is my .Xresources in case you can see something that could trigger this:
! urxvt
URxvt*geometry: 80x22
URxvt.buffered: true
URxvt.cursorColor: #5E468C
URxvt.cursorBlink: true
URxvt.transparent: 0
URxvt*depth: 32
URxvt*background: [100]#000000
URxvt*foreground: [100]#FFFFFF
URxvt*saveLines: 5000
URxvt*termName: rxvt-unicode
URxvt*urgentOnBell: true
! -- Xft Settings -- !
Xft.dpi: 96
Xft.antialias: true
Xft.rgba: rgb
Xft.hinting: true
Xft.hinstyle: hintfull
Xft.autohint: 0
Xft.lcdfilter: lcddefault
! Colors
URxvt*color0: #000000
URxvt*color1: #A80000
URxvt*color2: #00A800
URxvt*color3: #A85400
URxvt*color4: #0000A8
URxvt*color5: #A800A8
URxvt*color6: #00A8A8
URxvt*color7: #A8A8A8
URxvt*color8: #545054
URxvt*color9: #F85450
URxvt*color10: #50FC50
URxvt*color11: #F2FC50
URxvt*color12: #5054F8
URxvt*color13: #F854F8
URxvt*color14: #50FCF8
URxvt*color15: #F8FCF8
! teh transparency stuff
URxvt*inheritPixmap: false
URxvt*tintColor: #080808
URxvt*shading: 0
! Border and scrollbar
URxvt*scrollBar: false
URxvt*borderless: 1
URxvt*scrollWithBuffer: false
! Fonts
!URxvt.font:xft:droid sans mono style=Regular:pixelsize=12:antialias=true
URxvt*font: xft:Bitstream Vera Sans Mono:style=Regular:pixelsize=15
!URxvt.boldFont:xft:droid sans mono style=Regular:pixelsize=12:antialias=true
! Clickable URLs
URxvt.perl-ext-common: default,matcher
URxvt.url-launcher: chromium
URxvt.matcher.button: 2
URxvt.colorUL: #4682B4
What might be the problem?
Last edited by Viper_Scull (2014-10-03 15:07:25)

Sorry, I haven't had internet connection until now. I'm already settled in Oslo.
I changed the title to EOF error. I start the server (urxvtd -q -o -f) and the parent process is PID 1.
I run uxrvtc and gives me "protocol error: unexpected eof from server."
These are the straces for the daemon http://pastebin.com/7pGRm14f and the client http://pastebin.com/HKiMytm7.
I can't make much sense of them.

Similar Messages

  • Have uploaded and installed CC 2014. Several apps give this error when I try to start them:  "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders" -or- The icon in the dock bounces once, and nothing

    Have uploaded and installed CC 2014. Several apps give this error when I try to start them:  "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
    -or-
    The icon in the dock bounces once, and nothing happens.

    Windows or Mac, and exactly which operating system version?

  • Spectrum digital DSK5416 driver setup gives an error when test wizard is run.

    Please help us with the following problem we are facing:
    1.    Spectrum digital DSK5416 driver setup gives an
    error when test wizard is run. A snap shot of the same has been
    attached.
    2.    The A/D module doesn’t pickup microphone signal or
    an audio sample for loopback but the implementation of the same works
    fine in CCS environment. (We are using Mic In and Speaker Out lines)
    3.    When a real-time application has run successfully
    and if you close the VAB environment the application starts running
    automatically until you reset the board.
    4.    We don’t find the flash program button enabled, so
    that any real-time program can be burned into flash and demonstrate the
    embedded feature.
    Note:
    We are using Windows Xp professional edition.
    Program is developed using DSK5416

    Hello, I have included some information that will help address your questions: (1) I couldn't see the attached image file (contained errors). The RIDE/VAB DSK5416 Driver makes use of a JTAG communication when reading/writing memory on the DSK5416 hardware. You will need to make sure that the JTAG transfer option has been selected in the Driver Setup dialog box. The memory test process may seem to take a long time due to the amount of memory being accessed. (2) The VAB RTDSKAD block component provides a one-channel A/D input that makes use of the line-in channel on the DSK5416 hardware. (3) VAB does not remove the downloaded DSP executable program from DSK5416 memory, and it does remain resident. That being said, I wouldn't expect that the program would begin execution when VAB is closed. I would recommend that you verify that the DSP program stopped properly upon selecting the VAB Stop command. Then, close VAB as normal. (4) The RIDE/VAB driver for the DSK5416 does not support programming of flash memory on the DSK5416 hardware. Regards, Steve

  • I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

    I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

    What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

  • Debug error when changing blending modes

    Hi there,
    I get a Debug Error every time I use 2 Adjustment Layers one above each other, with the following effects applied:
    Adjustment Layer Above:
    - Tint, not keyframed
    - Opacity Blending Mode: Color Dodge
    Adjustment Layer Below:
    - Venetian Blinds, not keyframed
    - Offset, keyframed
    - Turbulent Displace, keyframed
    - Opacity Blending Mode: Normal
    Media layer below:
    - JPG, Canon 60D - 5184x3456 - no effects applied
    The error I get (option to 'Continue', but the program doesn't respond and needs to be closed):
    Premiere Pro Debug Event
    Premiere Pro has encountered an error.
    [..\..\Src\CutlistRenderer.cpp-717]
    Error in Events panel:
    An input contract violation has occurred!
    I first started to get this error, while working with various media files in 1440x1080/HDV 1080i mode (Sony Z7U native)/29.97fps/1.33 sequence. Trying to understand what it goes wrong, I created a new project and recreated the adjustment layers (AL) with same effects applied - the only thing changed was the JPG added as media under both ALs. Same debug errors every time the blending is changed from normal to any other blending mode. With normal blending on the AL above, everything is fine.
    After further testing, it looks like even with only one AL (no effects) above the JPG, get the same debug error when blending is changed from normal to any other mode.
    Important note: Same layer+effect configuration applied in 1920x1080/ARRI Cinema mode/24fps/1.0 sequence - it works with no debug error. Haven't tried any other editing modes yet.
    Layers, in order from top:
    - AL (Venetian Blinds, Tint, Offset, Turbulent Displace - Color Dodge blending)
    - AL (Venetian Blinds, Tint, Offset, Turbulent Displace - Normal blending)
    - AL (Timecode effect)
    - Title
    - media, MPEG (1440x1080, 29.97 frame rate, 1.3333 pixel aspect ratio)
    - After Effects composition (dynamic link) 1920x1080 - content: media file, MPEG (640x480, 30fps, 1.0 + various titles and effects, including color dodge blending
    I googled for similar error reports, there are none related to Premiere Pro.
    I don't know what else to do, rather than just avoid using this effect configuration.
    Does anyone else had this issue, even in different situations?
    Thank you very much for any feedback.
    Best,
    Mark
    Hardware:
    HP Z820
    Dual Xeon E5-2643 - driver 6.1.7600.16385
    Dual nVidia Quadro 4000 - driver 8.17.12.7628
    64GB RAM
    SSD 250GB for System
    HDD 3TB for Media
    Software (up to date):
    Adobe Premiere Pro CS6 - Version 6.0.3 (001 (MC: 264587))
    Windows 7 x64 - 6.1.7601 Service Pack 1 Build 7601

    I've never seen that error myself.  If you have a way to avoid it, might be best to just do that.

  • Why do I get a program error when changing colors?

    I get a 'Could not complete your request because of a program error' when I try to change colors on both the forground/background palette or from the color picker palette.  Is there a patch for this?
    I am using Photoshop CS6 version 13.0.1.x64

    Hi. Because this forum is for beginners trying to learn the basics of Photoshop, I'm moving your question to the Photoshop General Discussion forum.

  • Photoshop gives "Program Error" when I try to open files while VPN

    I think this may be a new one. While VPN on my company network, Photoshop CS cannot open any files. Either drag and drop, double click or even file open command. You get the clock and the message "failed to open because of a Program Error.... " or something close to that. I'm sure it says Program Error though. Works fine if I'm not VPN but soon as I'm on it stops opening files or even creating a new blank canvas gives that error. I checked Adobe forum and nothing there to find about this one. Anyone else have this happen?

    Hi, SSI.
    1. What VPN client are you using?
    As a guess, your VPN client may be blocking a port that PS CS may use for license verification over the Internet. The fact that it works AOK when not using the VPN would tend to support this hypothesis. As to what port it may be attempting to use, I can't say, but you may be able to find this out from Adobe and then work with your firm's networking staff to see if this port can be opened for use when the VPN is active.
    2. You noted that you "checked Adobe forum and nothing there to find about this one." Did you post to the Adobe Photoshop forum? If not, I recommend doing so.
    3. You wrote: "You get the clock and the message "failed to open because of a Program Error.... " or something close to that. I'm sure it says Program Error though."As FYI, in cases such as this, copying down the exact text of the message is helpful.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Ipod 80gig gives an error when connecting to pc, and deletes all

    hi,
    i have an ipod 80gig since december and in the beginning when i connected it to my computer sometimes it blocked and i had to restore (all my music GONE!).
    it bothered me but it didn't happen so often.
    now allmost EVERYTIME when i connect my ipod to my computer, itunes gives an error saying there was an error, he can't read it and i have to click restore. when i unplug it then, all my songs are deleted off my ipod. and when i restore later it works like normal again... HELP ME!
    i hate this because i allways have to put everything on my ipod again and it takes forever for all those songs to upload again.
    all help is welcome! thanks!

    Hi there,
    It sounds like the video may need to be converted to sync properly. I would recommend taking a look at the article below for more information.
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    http://support.apple.com/kb/ts1497
    -Griff W.   

  • Inbound Processing : Error when changing a BOM

    Hi Experts,
    I have the following error when I send a BOMMAT IDoc in "Change" Mode (Editing the BOM, to recreate the History inthe Target system) :
    Start processing in API: CSAP_MAT_BOM_MAINTAIN
    Group BOM
    Changes to the BOM exist after 03.11.2008
    Date 03.11.2008 copied from change number
    Item (1) 0040 L 000000001084237016 000000000000000000000000  cannot be uniquely identified
    Item (3) 0100 L 000000001084237021 000000000000000000000000  cannot be uniquely identified
    Item (6) 0200 L 000000000768041196 000000000000000000000000  cannot be uniquely identified
    End of processing in API: CSAP_MAT_BOM_MAINTAIN
    Any idea ?
    Regards,
    David

    Hi Gordon,
    I think I found something.
    When I create a BOM with ALE in the Target, no problem. Then when I want to update it, I've got this error ...
    In the Source, we're working with Text Object for Text Item (INCLUDE Text ID). But in the Target, Text Object doesn't exist, and when we update or modify the BOM via ALE, the Inbound Process try to find the old Text Object before updating it with the new one ...
    I think the solution is to create all Text Object/ID (Ta SO10) in the Target ... I don't understand why the ALE Inbound Process doesn't create Text Objects if they don't exist...
    Regards,
    David

  • Satellite M40: Graphic Errors when changing screen resolution

    Hi,
    I have a Satellite M40 and a big problem.
    in windows xp pro sp2:
    when a program changes the screen resolution, the screen gets messed up,
    I see only stripes and only a restart can get it back working (or suspend to disk).
    [edit]
    I plugged an external monitor to the laptop and it works,
    the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally also show
    [/edit]
    in linux:
    this can be also seen when changing from the xwindow mode in linux back to tty(1-6)
    Here are some pictures of this strange behavior:
    http://www.ronnylindner.de/extern/images/toshiba/screen1.jpg
    http://www.ronnylindner.de/extern/images/toshiba/screen2.jpg
    http://www.ronnylindner.de/extern/images/toshiba/screen3.jpg
    It looks like a hardware problem, but could it be just a wrong bios setting?
    What can I do?
    Bye and thanks in advance, Ronny
    Message was edited by: [email protected]_DE

    I will try it with the Toshiba graphics driver, at the moment I use the newest Omega driver
    I use 1280x800 as normal resolution
    programs giving this error:
    world of warcraft (1024x768) -> working with 1280x800
    age of empires 2 (800x600)
    as I said before, I get this problem also using Suse Linux when I switch from KDE to tty
    thanks you too, hope we can get it working together :-)
    [edit]
    strange, using the Toshiba display driver I got the problem at the first try (aoe2), but now it is not reproducable :-(
    [/edit]
    Message was edited by: [email protected]_DE

  • UNCAUGHT_EXCEPTION runtime errors when changing the PO

    Hi everyone,
    We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
    I don't know what is the exactly that cause of this problem
    Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
    Thanks,
    quare

    Hi Disha,
    I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
    Runtime Errors         UNCAUGHT_EXCEPTION
    Except.                CX_BBP_PD_ABORT
    Error analysis
        An exception occurred. This exception is dealt with in more detail below
        . The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
         caught,
        which led to a runtime error.
        The reason for this exception is:
        Übernehmen
    After further search of error there is also message that relates to this error:
    Buffer table not up to date
    Message no. BBP_PD001
    Diagnosis
    In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
    Procedure
    Start the transaction again. If the error occurs again, create an OSS message.
    To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
    I wondering what is the problem. Since it occurs not for all PO but certain PO only.
    Please help.
    Thanks,
    quare

  • FM GUI_UPLOAD gives PC036 "Error when opening the download file".

    Dear all
    I'm having a problem with a particular PC.
    A program which calls FM GUI_UPLOAD gives the error PC036 "Error when opening the download file".
    The file we are trying to upload is a text file, with tab delimiter.
    If the same user executes the same program from another PCs, it works fine.
    If another user executes the program in the "problematic" PC, it gives the error.
    So, the problem is PC-related.
    I checked SAP GUI Codepage, and was the same as other PCs.
    I cheched regional configuration, and was also the same as other PCs.
    The operating  system is Windows XP, and the SAP GUI version is 7.10,  File version 7100.2.7.3077, Build 967944 , Patch level 7.
    SAP version is ECC6.
    I searched across forums, SAP note, and the web, but I couldn't find anything.
    I would be grateful if someone could give me ideas.
    Thanks in advance
    Jordi

    Hello. The user accounts are have same privilegies (like both are "Power users")? Also the file system are the same in both PC NTFS or FAT32 (today i'm find FAT32 in enterprise ) If NTFS may be some Domain politics are not allow to save file correctly, or space are not enough....Try check this first...Regards.

  • Error when changing the length of IO

    Hi Experts,
    I have changed the length of one of my Info-Object from NUMC-2 to NUMC-3. While trying to activate it it is giving the error "Structure Change at field Level(change Table)".
    But When i changed the length of one more IO before from Char-1 to Char-3, it successfully got activated.
    Please help me out.
    Regards,
    Pavan

    Hi Ananda,
    We cannot delete the master data.
    Can Anyone pleasetell me why this IO is not getting activated when i change length from NUMC2 to NUMC3
    I didn't face any problem when i changed the length of one of my IO from Char-1 to Char-3. It successfully got activated
    But im facing this problem when I try to change the length of another IO from NUMC-2 to NUMC-3.
    If anyone any any solution for this otherthan deleting the existing data, please do let me know.
    Regards,
    Pavan

  • Facing an error when change the sysadmin password

    hi expert,
    when i am going to change the sysadmin password i m facing the below error on linux  in production environment. i cant understand why this error occured. i change the sysadmin password many times but never get any error. when going to change the sysadmin password the production instance is open.
    [applprod@oracleerp ~]$ FNDCPASS apps/apps 0 Y system/manager USER  SYSADMIN sys@adm!n
    -bash: !n: event not found
    plz suggest how can i resolve the above error.
    thanks &  regards
    pritesh ranjan

    Hi Pritesh Ranjan,
    plz suggest me one thing can i change sys password directly without down the ebs application same as system user.
    exp -
    alter user system identified by manager;
    for sys
    alter user sys identified by oracle123; (in production environment without down the ebs application)
    Yes, you can change without restarting the ebs application.
    And your syntax seems fine.
    Thanks &
    Best Regards,

  • ACS SE: Error when changing IP setting

    I got this error when trying to change the IP address setting:
    Error: Failed to get NIC configuration: (null) (FFFFFFFF)
    My ACS SE is now not functioning because of this. Is there any way to recover besides using the Recovery CD ?

    Does this happen to small number of network devices or the whole set
    If the former then I found the following CDETS
    CSCtw59271    Random Network Device corruption after upgrade from ACS 5.2 to 5.3
    Which includes the following workaround
    Symptom 1: Delete and re-add the AAA client
    Symptom 2:Modify the TACACS+ shared secret of the Network Device, re-enter the same key and save the Network device.
    >>>> Use case where TACACS+ was used
    There are some important fixes related to upgrade issues in patch 5 and later for ACS 5.3. While these do not relate to NDs I do recommend installing this patch

Maybe you are looking for