Usage Doubled with no change in Use or Video's ect....

Same Story-Same Run-Around. Are other people seeing this? I have called and called with same responses from all people. They make you switch from unlimited to 20GB plans and all of sudden it doubles.

Similar Messages

Problem Mac mini G4 with Panasonic 52" Plasma using s-video (composite)

I am upgrading my mac mini but until then I'd like to watch some movies on my new Panasonic 50" Plasma (TH50PZ80U). The first I connected them together using a DVI-to S-Video adapter it worked but with low resolution (can't remember). The resolution was fine for movies but not reading. When I tried to increase the resolution the screen became all grey and black (like when there's no the TV channel in the old days). I tried all of the following but nothing has worked:
1) Played with the mouse for an hour to try to change the resolution but kept starting new programs instead
2) Connected to my apple display cinema, change resolution to the minimum, and then reconnected it and nothing
3) Asked a friend to bring his laptop to do screen sharing but my OS 10.4.11 doesn't support this functionality
4) Tried starting in safe mode and it won't start in safe mode. It gets stock on the gray apple screen at launch
5) Tried getting an HDMI cable but this mac mini is not strong enough for the plasma screen. It kept going black after a few minutes
6) Tried using keyword shortcuts with SwitchResX but I couldn't seem to find the right sequence.
Remember that I tried to the above blind since the screen was all blurry.
Can someone help. Thanks

+I tried with an HDMI cble, through a DVI adapter, but it seems that my 1st generation mac mini is not powerful enough for that. It comes out at first but as soon as I start any application, it looses signal+
I'll ask again; what happens if you try starting in Safe mode connected by HDMI? I understand that with a normal start and running 1080p, the mini is not necessarily stable. But if you start safe, or start normally, and quickly change the resolution to something lower than 1080p, the mini should be "powerful enough" to run the Panasonic at 720p for example. That should not present a problem.
If you really just want to get back to using the S-Video interface at 640 x 480, you should be able to throw out the display preference files to get back to a clean start. That usually works. Try the following; in /Library/Preferences find the file com.apple.windowserver.plist and throw it in the trash or drag it to the desktop. Find also in /Users/yourusername/Library/Preferences/ByHost the file com.apple.windowserver.xxxxxxxx.plist where xxxxxxx is a string of letters and numbers and yourusername is the name on the main user account and throw that in the trash, too (or drag it to the Desktop). Then restart and see if function returns to S-Video when connected to the Panasonic.

Using "long double" with gcc

I want to use long doubles (quad, 128-bit floating point variables) in C. I thought the following program would do it:
#include <stdio.h>
int main()
long double a, b, c;
b = 1./7.;
c = 7.;
a = 1./c;
printf("%.30e \n", a);
printf("%.30e \n", b);
printf("%.30e \n", c);
return 0;
But the program returns garbage when compiled and run with:
%gcc top2.c -o test
%./test
-1.391130315222827826529386765980e-220
-1.391130315222712834096824073018e-220
-2.681561585988519419914804999641e+154
(XCode 3.1, gcc 4.0.1 or 4.2.1, Intel Xeon, 10.5.4)
The program works for double, however.
So what am I doing wrong?
Matthias

I can't really help you much there. Maybe you should think about what you are doing and what you really need. I doubt you really need 128 bits. In Apple's Documentation it says:
-m96bit-long-double
-m128bit-long-double
These switches control the size of long double type. The i386 application binary interface specifies the size to be 96 bits, so -m96bit-long-double is the default in 32 bit mode. Modern architectures (Pentium and newer) would prefer long double to be aligned to an 8 or 16 byte boundary. In arrays or structures conforming to the ABI, this would not be possible. So specifying a -m128bit-long-double will align long double to a 16 byte boundary by padding the long double with an additional 32 bit zero.
In the x86-64 compiler, -m128bit-long-double is the default choice as its ABI specifies that long double is to be aligned on 16 byte boundary.
Notice that neither of these options enable any extra precision over the x87 standard of 80 bits for a long double.
Warning: if you override the default value for your target ABI, the structures and arrays containing long double variables will change their size as well as function calling convention for function taking long double will be modified. Hence they will not be binary compatible with arrays or structures in code compiled without that switch.
Message was edited by: etresoft - gave up trying to format it fancy

Data Overages for first time with no change in usage. What's up?

I see there are numerous posts about unexplained data overages. I think Verizon is manipulating the data changes somehow. I have always used about 2 gig a month, but had a 4gig plan. Never went over. Then one morning I had a text that I had used 75% of my date. Somewhat surprised, but I drove to work, none of my devices on. When I turned on my phone it said I had used 90% and within minutes said I had exceeded my data. I called Verizon with a lot of questions as how could that have happened. I was not given a response that made any sense but was told they would increase my data plan to 6gig for no additional charge. I agreed. Now at the end of this month the same thing happened. I went over my 6 gig with no changes in my usage. I do not stream music or watch videos, etc. No way I could have used that much. It showed I used 1.6 gig in one day, that's what I used to use for a month. Something is not right. What agency governs cell phone companies. We all need to report this.

Softtailrn
It all comes down to those "pre-installed apps" and their updates that just won't stop downloading.
today, I realized that my phone was running kinda slow, so I went into the application manager and started deleting apps, and their updates. It took me a good hour to get all the useless ones out of the way, when I accidentally deleted all my contacts. Since my contacts was really the only thing I cared about, and now they're gone, I decided to go ahead and do the factory reset. Why not? So I started all over again like it was a new galaxy s5. My contacts came back no problem, and so didn't all those useless apps I deleted, so on my way back to the app manager to start deleting them again... I checked my data usage and how many gigs I had just freed for myself... a whole 8.57G out of 16G now freed up! nice right? Yea, then I see that little exclamation point in the top left corner, it said 30 apps have been upgraded, and there was nothing I could do to stop this, I don't want to go through all those apps and updates for a 3rd time. I thought, how much data is that gonna use? Turns out... 2.74Gs in 20 seconds and that was olny just 20apps, out of what 130 apps? That are being updated regularly everyday
Now I'm starting g to make sense of it now... my parents knew we were being had, for awhile now, just didn't know how. We've been talked into getting a 4G family data plan, charged over 900.00$ verizon bill, charged for data overages where we too don't use our phones for anything other than phone calls, or looking up something on the net. No music, no movies, none of that fun stuff. I see that in a matter of 20 seconds our data limit of 3G is just 1/4 away from gone, and that's just, what? 1 or 2 unwanted updates away from another overage charge? So I try to stop these updates by selecting in the Google play settings "do not update apps" but that simply doesn't work. It seems by simply connecting to WI-FI will negate my command.. and the updates keep coming. Only by shutting off both mobile data and WIFI seems to stop the updates... temporarily. It's hard to explain but it looks like verizon is using Google play app updates to max out data, and verizon is charging us for overages 2 and 3 times a month! They manipulate the data to make money, Stealing, and we're not the only ones, you caught them too ^^^. This is criminal, and something does indeed need to be reported to a proper governing body above verizon.
This has been going on in my family unnoticed for years, until now.
Resulting in ridiculous bills, coupled with false overage charges. Causing nothing but heartache and stress for my family, but we still pay... God I don't know why. But we do, and they just keep Taking.
I found out their heartless corporate bullying tactics against the little people, and you did too ^^^ they just keep throwing new "plans" and "6 more gigs" at us.
They sneak these updates right under our noses, blow up our data and threaten us to pay, or else we'll be blackballed from cable/Internet everywhere.
this is nothing else but criminal, rigging the game.
We don't want more gigs, we want our money and out mental health back!

How to delete "other" content which doubled with IOS 8.1 - I already tried deleting apps and pdfs i had saved, browser history, accessability to apps changed turned off, didn't change the 32 GB of "other" IOS 8 added on

how do I delete "other" content which more than doubled with IOS 8.1 - I already tried deleting apps and pdfs i had saved, browser history, accessability to apps changed turned off, which had absolutely no effect, 32 GB of unusable "other" still on my iPad.

*Feedback*
"Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
http://www.apple.com/feedback/ipad.html
We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
   -- click on New icon
   -- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
   -- etc.

HT204053 I need to use an existing ID (email address) on a new iPhone. It tells me "choose another ID - that one is in use," with the option to "use existing ID," however, it is an endless loop, referring me only to change my password on the existing ID.

I need to use an existing ID (email address) on a new iPhone. It tells me "choose another ID - that one is in use," with the option to "use existing ID," however, it is an endless loop, referring me only to change my password on the existing ID.
How do I enable my new device with an existing ID - I do not need to change the password for the millionth time!
None of the FAQs (or the Community choices below) address new devices, they are all about APPS and iCloud stuff.

If it is an existing iCloud ID, you should be able to just go to Settings>iCloud and sign in with it.

HT1807 I travelled to a different country & using a new sim; with the change in sim, I have been unable to use iMessage & FaceTime. Cant replace replace the earlier no with the current one and it reads error. how to correct this?

I traveled to a different country and using a new sim/new carrier. With the change in the sim, I have been unable to use the iMessage--outside of WiFi coverage area, and FaceTime at all time. I believe it is due to the phone number registered as an address in the phone, which has not changed with the change of sim; so it countinues to showing as an error while varifying the data.
Wonder if any of you are in a position to advise as to how to address the following.
1. I need to input correct phone no, meaning the number I am using in the correct location.
2. I need to activate FaceTime and be able to use it.
3. I need to be able to use iMessage and/or ordinary sms while outside of WiFi coverage area.
It may be mentioned in my current location I don't have GPRS on the cell phone which is the case in my regular station.
Thanks for your help.

for #1
Frequently asked questions about Apple ID - Apple Support
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
for #2
Apple does not accept unsolicited ideas see Apple - Legal - Unsolicited Idea Submission Policy

I had this video file and I was trying to flip it to a format that would work with iMovie. It used to have the Quicktime image with it. So, I assume it was a QT file. But, somehow I've changed the file from a video to a folder.

I had a video file and I was trying to flip it to a format that would work with iMovie. It used to have the Quicktime image with it. So, I assume it was a QT file. But, somehow I've changed the file from a video to a folder. I've tried to undo the action. No luck. I wasn't running my Time Machine. So, I can't go back. Help. It's the only copy of this video.

I've tried to undo the action.
How?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
it's the only copy of this video.
Where did you get the video from?
From the pic I noticed that the folder is 841.9mb. What's inside? Or what happens when you click on it?

Using Planned order Change BAPI with out changing date

Hi
I have a planned order with start date in future.
With in a program, I want to call the planned order using the FM BAPI_PLANNEDORDER_CHANGE to re-explode the order BOM.
I find that only if I change the order start date to system/current date, the planned order BOM gets updated/re-exploded. Else there is no change in the order BOM.
My requirement is to re-explode the BOM with out changing the order dates. In the function module I am maintaining "X' against BOM_EXP_FIX_IND.
But when I do it manually using MD12 and explode BOM with out changing the future start date, the order BOM gets updated.
Please help on this. Or is there any other FM/BAPI for this purpose.

Dear Pradeep,
you could try to set DET_SCHEDULE = X with out
FIRMING_IND --> No
BOM_EXP_FIX_IND --> No
Let me Know if it modification setting have solved your problem and i have useful for you,
Daniele

Re-using a function with minor changes to load sub Nav menu

Hi.
I have a function that loads xml and uses its to create a
main navigation menu. When an object is selected the movie detects
which button has been selected and traces the label for that
button. I need to take this a step further and have a
sub-navigation menu load when the "Home2" button is selected. As
you can see from the comments in the code with 2 minor changes to
the createBoxes function, the sub-nav menu can be loaded instead of
the main nav menu. My problem is this, I need to main nav menu is
be present at all times, I only need the sub nav to load when the
Home 2 button is pressed and I somehow need to reuse the
createBoxes function with the changes stated in the the comments in
order to load the sub nav menu when required. I want to reuse this
function (if possible) instead of duplicating the code in a new
function.
If anyone can show me how this is done I would be very
greatful.
Thanks
Barry.

basically the submenu will look exactly the same as the main
menu, only it will be positioned to the right of it when the home2
button is pressed. I then need it to unload when any other button
is pressed. By changing the following lines in the current
createBoxes function the submenu loads as I would like. I am just
wondering if it is possible to pass in a couple of vars to change
the lines of code as detailed below, depending on whether the home2
button or one of the other mainn nav buttons is pressed.
The code that when changed loads the submenu:
In function createBoxes change var il:XMLList =
xml.navigation.main_navigation; to var il:XMLList =
xml.navigation.main_navigation.sub_navigation; . This loads the sub
nav instead of the main nav but in the same position as the main
nav.
by also changing box.x = 100; to box.x = 260; in the function
createBoxes the sub nav menu loads in the position I would like it
to be.
Now I am wondering if changing the code to something like the
following (see attached code) could this work?
Barry.

My MacBook uses Mac OS X Version 10.6.8. I am unable to access some websites, such as Facebllk, Gooogle, etc, but I can access other websites such as MSN, Amazon. I have emptied the Safari cache with no change. Appreciate any help.

My MacBook uses Mac OS X Version 10.6.8. I am unable to access some websites, such as Facebook and Google, but I can access other sites such as MSN and Amazon. I have emptied the Safari cache with no change. Appreciate any help in solving this problem.

My MacBook uses Mac OS X Version 10.6.8. I am unable to access some websites, such as Facebook and Google, but I can access other sites such as MSN and Amazon. I have emptied the Safari cache with no change. Appreciate any help in solving this problem.

Network setup 'DHCP with manual address' changes to 'Using DHCP'

I have setup my local network with a manual address and have observed that the setting changes without my doing to simply Using DHCP. I can't get the setup to continue using a manually assigned ip address. Even though I've saved the network settings preferences, they revert to 'Using DHCP'. Any ideas? Thanks in advance.

If you "have setup (your) local network with a manual address," does that mean you have disabled DHCP in your router? If so, then you'd want to configure "manually" in your Sys Prefs > Network.
Or did you mean that you have setup a computer on your local network with a manual address using DHCP? (And that your router has DHCP enabled?)
If the router's DHCP is enabled, many routers will allow you to set aside a subset of IP addresses to the DHCP pool, and the remainder are, by definition, reserved for static addressing. Are you assigning the computer requiring a static IPA (but using DHCP defined gateway and subnet) an address falling within the static address range of your local subnet?
If you can't partition the address space between static IP addresses and DHCP-assigned IP addresses when DHCP is enabled, are you assigning a high-numbered IP address to the computer whose Sys Prefs has DHCP with manual address?

Issue with posting change note processing using movement type 309

while processing Posting change note using transaction LT05, i am getting error 'Available quantity is less than selected quantity'. we need the quantity in posting change note to be picked from same storage bin from where it has been picked during transfer posting using 309. currently, it is showing all storage bins in ascending order for selection while Posting change note posting.
if we reqwhile mass porcessing of Posting change note using LSMW, it pickes the 1st storage bin. if 1st storage bin quantity is less than selected quantity of PCN then it is showing above error.

Hi Vishal,
The materials are managed by batch? Please check the batches of the material in the different storage bins. SAP asign the storage bin taking into account the material batch number and the oldest quant.
When the storage bin is not indicated, SAP looks at the batch number, and goes to the storage bin where this batch for the material is allocated. If SAP find more than one storage bin, SAP consumes from the batch that has the oldest quant.
I really dont understand deeply your question.
Hope it helps.
Regards
Enzo

Is it possible to find out what has been downloaded on my phone as for some reason my data usage doubled in one month but I have no idea how

Hi
Need some help regarding downloads and data usage on my Iphone 4. In one month my usage doubled and I had 6 downloads which used up half of my data allowance (250mb). I hadn't used my phone any differently and I do not download music/movies/tv programmes etc. Orange are being really useless with helping me and I would like to be able to find out what sites were visited or what was downloaded on certain days as some of the high usage is when I'm at work and not able to use my phone.

Hi
Need some help regarding downloads and data usage on my Iphone 4. In one month my usage doubled and I had 6 downloads which used up half of my data allowance (250mb). I hadn't used my phone any differently and I do not download music/movies/tv programmes etc. Orange are being really useless with helping me and I would like to be able to find out what sites were visited or what was downloaded on certain days as some of the high usage is when I'm at work and not able to use my phone.

Problems with Plan Change - Needs Immediate Result

Hello,
I have been a long time Verizon Wireless customer. I have two lines, one of which was assigned to a tablet with a 1gb plan. I maintained this line for the upgrade since my other line has unlimited data. I recently upgraded to the Note 3, and in the process was told that I'd have to establish a new line to accomplish the upgrade. The representative, from Costco, let me know that it shouldn't be a problem transferring the same plan to the newly established line and not to worry about anything going wrong. That night I called Verizon for the first time and worked with a customer service representative who ended up making the problem worse by canceling the tablet line before transferringthe device to the new line. This caused a problem with my sim card, and I have to request a new one because my old was was constantly showing an "aging" status. Even a few days later. The first night consisted of two phone calls to Verizon because the rep mentioned above ended up disconnecting me trying to get over to tech support. The second rep was much more helpful, but wasn't able to do anything and let me know I'd have to work with tech support, but should wait until the next day to allow the sim to "age."
The next day was the 4th of July, so I called back the next day and went through a similar process, spent about 30 minutes with one rep, only to be told my sim was still "ageing" and to talk to tech support. Every time I was connected with tech support it was a minimum 30 minute wait, just to be told that there was nothing they could do, again, and they sent me a new sim card. When i received that sim, at which point it was the following week, I called back and activated my tablet successfully. Hung the phone up and thought all was well, until I saw my balance due the next day. It was nearly double what I usually pay. The representative never informed me that it would default to a prorated amount based on that payment, of 4gb. None of which I need. I called back, again, and was told that I wasn't able to use the old plan I had since it didn't exist anymore. This time the representative was very pleasant, and let me know she'd put a request in to see if the old plan would be possible, given my situation. I was alright with that, and this was the first time I wasn't frustrated after hanging up the phone.
She called me back yesterday letting me know that Verizon isn't willing to allow me to use my old plan, and that there is a new plan options, that is 10 dollars a month. Honestly that was all right, so I called in today to change it to that plan and have it backdated to the date of upgrade to fix my billing issue. During the process of looking up my information, the representative I spoke with today disconnected me. Over the last week and a half I have spent nearly 3-4 hours on the phone with Verizon just trying to fix this issue that was not anything I could have controlled.
The rep at Costco told me I'd have no issues transferring my lien to the new line we opened that day, and the first individual I spoke with on the phone canceled the line too early and further delayed the process by requiring me to request a new SIM card for the tablet. After being disconnected this time, I'm extremely frustrated with the entire situation and Verizon in general. I've been a customer of Verizon for nearly ten years, and for the fist time I am considering moving to another carrier seeing. In that ten year period, I have probably called into customer service less than 5 times. And in the last week and a half I have made more calls, and spent far more time on the phone than every before.
The bottom line is, I need to have the plan changed on my tablet line to something comparable to what I had previously, which was a 20 dollar, 1gb plan with the 10 dollar tablet fee. I need this taken care of ASAP and I need to know it's being done correctly. If Verizon is going to partner with companies like Costco to provide phones to members, and increase their customer base, than these reps need to be better equipped to handle the upgrade process. And it seems that the call centers I have spoken with are a 50/50 shot in terms of reaching someone who is able to do their job effectively and in a timely fashion.
I hope to be contacted with a resolution by today or I will be returning the phone, and looking elsewhere for my wireless needs.
Thank you.
Josh

There is an "undocumented" parameter you need to include in your
page. It MUST be a hidden field value called "p_action". The
form hidden value is either "OK" or "CANCEL" (case sensitive).
Thus, when the form is submitted, this parameter states to
commit the changes. Useful if you have a "Save" button and
a "Cancel" button.

Usage Doubled with no change in Use or Video's ect....

Similar Messages

Maybe you are looking for