Usb 6211 and LabView - good for IV characteristic aquisition?

Hi there,
I pre-emptively declare my lowest level in using LabView and all the annex tools, so my question won't result too silly.
I need to automatically acquire the IV characteristics for 4 solar devices, so I am thinking about connecting them to the USB 6211 in order to switch from one device to another one.
My question is: can I use a LabView Program in order to simulate the Voltage signal to apply (range c.ca -1 to +1 V), and then collect the relative current?
If so, how??
Many thanks in advance for any sort of help.
Laura

http://zone.ni.com/devzone/cda/epd/p/id/5918
http://zone.ni.com/devzone/cda/tut/p/id/7229
LabVIEW has a toolkit available for this. It uses an SMU card but you could simulate that with your 6211 and a current sensing resistor.
Using LabVIEW: 7.1.1, 8.5.1 & 2013

Similar Messages

Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off an

Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
thank you for your help.

Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

CacheCade Pro 2.0 and FancyCache - good for video / Premiere Pro?

Here are some links to the products and to the review of those products. Anybody used these or have opinions of how they might work for video editing?
Fancy Cache
http://www.romexsoftware.com/en-us/fancy-cache/index.html
http://thessdreview.com/our-reviews/romex-fancycache-review-ssd-performance-at-13gbs-and-7 65000-iops-in-60-seconds-flat/
CacheCade Pro 2.0
http://www.lsi.com/channel/products/storagesw/Pages/MegaRAIDCacheCadeSoftware2-0.aspx
http://www.storagereview.com/lsi_megaraid_cachecade_pro_20_review

i got 4.7ghz but my gtx is just 850 right now but i could do higher, what voltage did you have it set? and i have the EVGA 2.5GB version, may not overclock as well if you used the 1gb version
-Matt
Date: Mon, 16 Apr 2012 01:28:27 -0600
From: [email protected]
To: [email protected]
Subject: CacheCade Pro 2.0 and FancyCache - good for video / Premiere Pro?
    Re: CacheCade Pro 2.0 and FancyCache - good for video / Premiere Pro?
    created by Crist OC/PC in Hardware Forum - View the full discussion
Hi Nott.
RamCash let you allow to set priority on Writing, Latency and some Others important details.
If you have the same CPU and GPU as I have we can start making sure this:
Your CPU is o.c. @ 4.7ghz or+.
GPU o.c.930mghz" this improve my time approx 7 sec."
Use 10gb of ram for ramcache, set latency on 10, and set writing priority.
Please let me know what HardD config you have and I will do with it.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4337221#4337221
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4337221#4337221. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Hardware Forum by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Can you record sound using a USB 6211 and convert the data to a .wav (or other sound) file?

Hello,
I am trying to build a system that will use a USB 6211 to record sounds from multiple electret microphones and then save the data as a .wav file or other sound file. I have already built my mics and hooked the mics up to the USB 6211; the DAQ device seems to do an adequate job recording the signal - I've recorded from 3 mics at a time at 11,025 Hz, although I don't know how good the signals are since I can't save them for playback after the fact, and they aren't going through my sound card. Ultimately, I would like to save the data as a multichannel audio file which I could then open in a program such as Audacity for further editing and analysis. Since Audacity can import a variety of sound files, my file format doesn't need to be .wav if another format would work better.
Any advice would be appreciated.
Thanks, Eric

If you are sampling all three simultaneously, your highest frequency recordable will be (11,025/2)/3, so about 1800Hz and that will pretty coarse (traditionally digital sound recording is at 44Ks/s at the low end). As to converting to a .wav, there are functions on the "Graphics and Sound" palette for saving waveforms to a .wav file.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

How to use USB interface with LabVIEW Embedded for ARM

Hi everybody.
I am developing an application based on the "LabVIEW Embedded for
ARM". Now I am doing various tests using
the evaluation board 2300 (with NXP LPC2378), but soon I will
dedicate to program the micro used in my project (NXP
LPC2148).
During the tests, I have seen that "default" LabVIEW interface allows the use
of CAN, I2C and SPI interfaces of the micro. I want to know how can I also use the
USB interface that is on the micros -both LPC2148 and LPC2378- (pin USB_D + / D-, USB_UP_LED,
USB_CONNECT, VBUS).
Thanks in advance for your suggestions

@chueco85
If you've created an application in LabVIEW for ARM and you build it.
you can go to tools >> ARM Module >> Show Keil uVision
then go to he build options.
the hex file will be created when you do a build.
with flash magic :http://www.flashmagictool.com/
you can program your device.
Wouter.
"LabVIEW for ARM guru and bug destroyer"

Driver to recognize usb mouse AND disable trackpad for gt780DX

I have updated the trackpad as much as I can but my cursor still jumps inadvertently to other areas of text while I am typing. I know several other branded laptops have the ability to automatically disable the trackpad when a usb mouse is plugged in. Does anyone know of such a driver for the msi gt780DX? There is no current function to do this and its incredibly annoying and happens daily... Thanks...

Quote
Originally posted by wz1
Now i have a microsoft usb mouse and in WinMe, when returning from an S3 suspend state, the mouse needs to be unplugged and replugged to work.
You didn't mention XP after this, so that and the thread title led me to believe that the problem only occurred in ME. I don't mean to be a jerk, but your initial post wasn't all that clear. And hey, man, I don't "blame" you--it's your hardware and it's yours to do as you please with. I see suspend/resume as a fairly trivial feature; thus, it just seemed to me that replacing a good (in my experience) mobo to fix it was a fairly drastic and costly measure. I was merely trying to help. Best of luck with the new mobo.

Variable (optional) and exclude value(#) for single characteristic

Hi,
In the reporting i want to apply variable and also fixed value restriction for one characteristic.
Example: I want to apply variable(single and optional) for plant and also restrict not assigned values(#)
I created variable (given single and optional)and also excluded # for plant but at the run time the variable act as a mandatory variable.
please help me.
Thanks
vijj

Hi Vijj
in your case that is not possible.here i am providing diagnosis of the SAP in which cases the optional is not possible.so try creating a customer exit variable.
Diagnosis
An optional entry for is not possible in the following cases:
is used in a selection row with Exclude (SIGN = E).
v1& is used in a selection row whose operation is not EQ or BETWEEN.
The selection row is an interval and both the from value and the to value are optional variables.
The selection is a structure element (FEMS >0) and comprises multiple rows for the same characteristic.
System response
Procedure
If you are able to accept the mandatory entry, you need not do anything. In the third case, you can use an optional interval variable. In the latter case, you define two or more (not visible) selection
elements that you combine with a formula element.
Procedure for System Administration
Praveen.
Message was edited by:
praveen

Vector (good for storing) and arrays(good for numerical sums, multiplying)

Hi guys, I am trying to use vectors because I need a variable lenght and store 2D arrays in one coordenate of a vector. That is why I am using vector instead arrays. I can turn the type of variable using "Integer" (instead of "int" as arrays), "Double" (instead of "double") and so on. The problem is that it doesn't allow me to operate, it is very good for storing, but I need to be able to operate, multiplying, sum, etc the elements there are in the coordenates. And I think it is not possible.
What u think about it? I can only store stuff ion a vector, I cannot operate. Besides I cant turn a data from "Double" to "double", I can either use arrays OR vectors, but not both of them at the same time.
You think i am wrong?, because I mean in that case, Java is not very useful to do this numerical problem.
Thanks.
This is only a class of the program I am doing.
import java.util.*;
class SolveDomain {
     int newton_iter = 0, m = 0, work_count = 0;
     double t = 0, dx, dy, dt, start_t=0;
     double[][] v;
Details obDetails = new Details();
     public double[][] solveDomainMethod(Double vAxn, Double vAyn, Double vBxn, Double vByn, Integer nxn, Integer nyn, double dt, Double error1n, Double error2n, double end_tn, int stepsn, Integer kcn, Double u_n[][], Double v_n[][], Double bc1, Double bc2, Double bc3, Double bc4, double u[][]) {
     double dx2, dy2, err = 1000000;
     v = new double[nxn+1][nyn+1];
     DoublevAxn, Double vAyn, Double vBxn, Double vByn, Integer nxn, Integer nyn, double dt, Double error1n, Double error2n, double end_tn, int stepsn, Integer kcn, double u_n[][], double v_n[][], Double bc1, Double bc2, Double bc3, Double bc4;
double k[][] = new double [nxn+1][nyn+1]; double kp[][] = new double [nxn+1][nyn+1];
double kpp[][] = new double [nxn+1][nyn+1]; double dudx[][] = new double [nxn+1][nyn+1];
double dudy[][] = new double [nxn+1][nyn+1]; double d2udx2[][] = new double [nxn+1][nyn+1];
double d2udy2[][] = new double [nxn+1][nyn+1]; double dudt[][] = new double [nxn+1][nyn+1];
double a[][] = new double [nxn+1][nyn+1]; double b[][] = new double [nxn+1][nyn+1];
double c[][] = new double [nxn+1][nyn+1]; double d[][] = new double [nxn+1][nyn+1];
double F[][] = new double [nxn+1][nyn+1]; double A[][] = new double [nxn+1][nyn+1];
double B[][] = new double [nxn+1][nyn+1]; double C[][] = new double [nxn+1][nyn+1];
double D[][] = new double [nxn+1][nyn+1]; double E[][] = new double [nxn+1][nyn+1];
double s[][] = new double[nxn+1][nyn+1];
          KDerivatives1 obK1 = new KDerivatives1();
          KDerivatives2 obK2 = new KDerivatives2();
UDerivatives obU = new UDerivatives();
          CalcPdeCoefficients obPde = new CalcPdeCoefficients();
          CalcFdCoefficients obFd = new CalcFdCoefficients();
          Gs obGs = new Gs();
dx = obDetails.seg(vBxn, vAxn, nxn);
dy = obDetails.seg(vByn, vAyn, nyn);
dx2 = dx*dx;
dy2 = dy*dy;
if (bc1 != -999999999) obDetails.initialiceBCDomainL(dx, dy, vAxn, vAyn, bc1, u);
if (bc2 != -999999999) obDetails.initialiceBCDomainU(dx, dy, vAxn, vAyn, bc2, u);
if (bc3 != -999999999) obDetails.initialiceBCDomainR(dx, dy, vAxn, vAyn, bc3, u);
if (bc4 != -999999999) obDetails.initialiceBCDomainD(dx, dy, vAxn, vAyn, bc4, u);
obDetails.source(dx, dy, vAxn, vAyn, s);
do {
++ newton_iter;
if (kcn == 1) {
          obK1.calc_k(u, k);
     obK1.calc_kp(u, kp);
     obK1.calc_kpp(u, kpp);
          } else {
               obK2.calc_k(u, k);
          obK2.calc_kp(u, kp);
          obK2.calc_kpp(u, kpp);
               obU.calc_dudx(u, dx, dudx);
          obU.calc_dudy(u, dy, dudy);
               obU.calc_d2udx2(u, dx2, d2udx2);
               obU.calc_d2udy2(u, dy2, d2udy2);
          obU.calc_dudt(u, u_n, dt, dudt);
          obPde.calcPdeCoefficientsa(k, a);
          obPde.calcPdeCoefficientsb(kp, dudx, b);
          obPde.calcPdeCoefficientsc(kp, dudy, c);
          obPde.calcPdeCoefficientsd(kp, kpp, dudx, dudy, d2udx2, d2udy2, d);
          obPde.calcPdeCoefficientsF(k, kp, dudx, dudy, d2udx2, d2udy2, dudt, s, F);
          obFd.calcFdCoefficientsA(a, b, dx, dx2, A);
          obFd.calcFdCoefficientsB(a, b, dx, dx2, B);
          obFd.calcFdCoefficientsC(a, c, dy, dy2, C);
          obFd.calcFdCoefficientsD(a, c, dy, dy2, D);
          obFd.calcFdCoefficientsE(a, d, dx2, dy2, dt, E);
          obGs.gsMethod(v_n, A, B, C, D, E, F, dt, error2n, v);
          m = m + obGs.iter;
          for (int i=1; i < u.length - 1;i++ ) {
               for (int j=1; j < u[0].length - 1 ;j++ ) {
     u[i][j] = u[i][j] + v[i][j];
err = 0;
          for (int i=0; i < u.length ;i++ ) {
               for (int j=0; j < u[0].length ;j++ ) {
               err = err + Math.pow(v[i][j],2);
          err = Math.sqrt(err);
while (err > error1n);
     return u;
public double[][] rectangleDomainF (Vector vAxvector, Vector vAyvector, Vector vBxvector, Vector vByvector, Vector nxvector, Vector nyvector, Vector error1vector, Vector error2vector, double end_t, int steps, Vector kcvector, double numberdomains, Vector bc1vector, Vector bc2vector, Vector bc3vector, Vector bc4vector) {
               double u[][] = new double[u.length][u[0].length];
               double dt = obDetails.seg(end_t, start_t, steps);
               Vector uvector = new Vector();
               Vector vvector = new Vector();
     do
++work_count;
          t = work_count * dt;
for (int k = 0; k < numberdomains ; k++) {
     solveDomainMethod((Double)vAxvector.elementAt(k), (Double)vAyvector.elementAt(k), (Double)vBxvector.elementAt(k), (Double)vByvector.elementAt(k), (Integer)nxvector.elementAt(k), (Integer)nyvector.elementAt(k), dt, (Double)error1vector.elementAt(k), (Double)error2vector.elementAt(k), end_t, steps, (Integer)kcvector.elementAt(k), (Double [][]) uvector.elementAt(k), (Double [][]) vvector.elementAt(k), (Double)bc1vector.elementAt(k), (Double)bc2vector.elementAt(k), (Double)bc3vector.elementAt(k), (Double)bc4vector.elementAt(k), u);
                                                       uvector.insertElementAt(u, k);
          vvector.insertElementAt(v, k);
while (t < end_t);
return u;

The only way to, for instance, multiply a Double object by another Double object is to convert them back to primitives, multiply them, and create a new Double instance:
public Double multiply(Double lhs, Double rhs) {
   return new Double( lhs.doubleValue() * rhs.doubleValue() );
}This is just an overhead that you have to accept if you want to use collections with primitive type data.
Coming soon in 1.5 (which is in Beta now and available for download in the usual places) a new feature called auto-boxing will do a lot of this automatically for you. You need to be aware that it's doing exactly the same operations with the same performance overhead; but it does save a lot of typing.
Thus in 1.5 the above becomes:
public Double multiply(Double lhs, Double rhs) {
   // Under the hood this is IDENTICAL to the above example
   return lhs * rhs;
}Now, addressing your post directly:
Besides I cant turn a data from "Double" to "double"
Yes you can, as in the first example, the doubleValue() method converts a Double object to a double primitive.
Java is not very useful to do this numerical problem.
If you need math performance, you need to use primitives, yes. Yes, that will preclude the use of collections.
Dave.

Acquire RCA video using USB adapter and LabView

Hi,
I would like to know if it is possible to acquire RCA video using LabVIEW. I plan to use a RCA to USB adapter in order to connect the RCA device to my computer. What would I need to capture video using IMAQ USB driver? Thanks in advance for the help.
Best Regards,
Paulo

Hello,
Please take a look in the following discussion forum:
http://forums.ni.com/t5/LabVIEW/Acquiring-and-buffering-a-video-signal-without-additional/m-p/434391...
Thanks.
Best Regards
Luciano Borges
R&D Engineer
Pirelli Brazil

How to restrict values and apply condition for a characteristic in a query.

Hi,
I have to add two customer class(characteristic) fields to my query which is available as a navigational attribute in my multiprovider ( from which my query is built ).
One field should give the values directly from master data. The values would be PV, CV, IT, OT. The other field should give only PV and CV based on the condition - Except CV, all others (ie. IT and OT) should be converted as PV.
I like this to be achieved in the query level since i dont want to disturb the underlying cubes in the multicube.
So i have two questions.
1. How to bring two fields in the query for the same characteristic.
2. How to achieve the condition in a characteristic for second customer class field mentioned above.
Could somebody help me in solving this?
Thanks in advance,
Somenath

Hi Somenath,
you are absolutely right;)
Besides the Third step
Try to add two new Selections to your Structure as
New Selection1 -> Set the Customer Class value to fix 'PV'
New Selection2 -> Set the Customer Class value to fix 'CV'
<b>you have to add</b>
New Selection3 -> Set the Customer Class value to fix 'IT'
New Selection4 -> Set the Customer Class value to fix 'OT'
Fourth step
Hide these four selections
Fifth step: Add a new formula to your Structure
(Customer Class == New Selection3)* New Selection1(Customer Class == New Selection4)* New Selection1(Customer Class == New Selection1)* New Selection2+Customer Class == New Selection2)* New Selection2
Hope it helps
Gabor
ps: experts maybe suggest easier way...

FieldPoint devices and LabVIEW program for educational project

I use LabVIEW 7.1 and NI FieldPoint devices (FP-1000) for educational
purposes. I want to control a automation unit which has got 6 digital
input(DI) and 5 digital output(DO). I used the sequence structure, but
actually I am not sure the solution whether true or not.
Working principle of my system:
If "Channel 1" DI is ON, DO Channel 10 must be "ON"(turn table motor
Start)
If Channel 2 DI is ON, DO Channel 10 must be "OFF"(turn table motor
Stop) and DO Channel 11 must be "ON" (drill motor Start) and after a
delay time DO Channel 12 will ON (drill motor down)
If Channel 3 DI is ON, DO Channel 12 will OFF, a bit of delay time DO
Channel 13 ON ( drill motor up)
If Channel 4 DI is ON, DO Channel 13 and Channel 11 will be OFF (drill
motor stop) and then DO Channel 10 must be activated.(turn table again
Start)
If Channel 2 is ON again DO Channel 10 will OFF and check cyclindir
control Channel 14 will ON, after a delay Channel 14 will OFF
If Channel 5 DI is ON, DO Channel 10 will ON again while DI Channel 2
is ON.
How can I project the system with LabVIEW 7.1?
Thanks, stn

This is a pneumatic technical experiment set. Your suggestions okey
but I have already studied these subjects.I have tested a solution for
the system using the sequence structues in the LabVIEW. But if you
sent to me an example vi, I will understand the solution way.Thanks.
Working principle of my system as a summary:
Step 1: When DI 1 is ON, DO 1 must be "ON"(turn table motor
Start) while DI 2 is ON. In this case DO 2 must be "ON" (drill motor
Start) and after a bit
time delay DO 3 will ON (drill motor down),
Step 2 : when DI 3 is ON,(drill bottom level), DO 3 will OFF, after
that DO 4 will ON ( drill motor upper position) in this case DI 4 is
ON, after that DO 1 again ON while DI 2 is ON (like step 1)
On 27 Ocak, 21:40, tst <[email protected]> wrote:
> Your description is not particularly clear.
> For example, what happens if DI 1 and 2 are True at the same time? Is DO 10 T or F?What's the difference between the DI 2 at the beginning and at the end? And so on...
> As a start, I suggest you try searching this site and google for LabVIEW tutorials. <a href="http://cnx.rice.edu/content/col10241/latest/" target="_blank">Here</a>, <a href="http://zone.ni.com/devzone/learningcenter.nsf/03f7c60f17aad210862567a..." target="_blank">here</a>, <a href="http://www.mech.uwa.edu.au/jpt/tutorial/index.html" target="_blank">here</a>, <a href="http://www.iit.edu/~labview/Dummies.html" target="_blank">here</a> and <a href="http://www.upscale.utoronto.ca/GeneralInterest/LabView.html" target="_blank">here</a> are a few you can start with and <a href="http://www.fafiles.com/" target="_blank">here</a> are some tutorial videos. You can also contact your local NI office and join one of their courses. In addition, I suggest you read <a href="http://zone.ni.com/devzone/conceptd.nsf/webmain/CB5E46406090C61C86256..." target="_blank">the LabVIEW style guide</a> and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
> To get more details about might be relevant for this case, try searching for "state machine" and look at the examples in the File>>New dialog.

I have a problem. I updatet to 5.0 and then Itunes can not find the phone and on the screen on the phone there are only a picture of an usb cabel and a logo for Itunes.

After updating Itunes can not find the phone and on the phone screen there are only a picture of an USBcabel and a Itunes logo. What can I do???

Try this previous correctly answered discussion
https://discussions.apple.com/message/11029862#11029862

I don't see a slot on the iMac to plug in my external hard drive. It only has usb ports and the one for plugging in the cable modem. Where/how do I plug it in?

new iMac, old external hard drive - where do I plug it in?

With this adaptor:
http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r?fnode=51
it appears new iMacs can support FireWire.

Is the Hardware and Software enough/good for my needs

I've been reading these forums and a few others and am concerned about somethings and hope some of you can help with these concerns:
Some background and info:
1. I've ordered a Dell XPS 720 H2C which as a Intel Core2 Extreme processor QX6700 (3.46GHz,,Overclocked) w/Quad Core Technology and 8MBcache, 4 GB RAM, Dual 768MB NVIDIA GeForce 8800GTX, 1.5TB RAID 0 HDD and a secondary 500GB SATA 3GB/s (No option for a RAID 0 secondary HDD, Windows VISTA ultimate OS.
2. Will be buying/upgarding the Production Premium CS3 package. (currently only use PhotoShop CS3 and Flash CS3).
3. I have a Canon XH A1 prosumer video camera (I'm an amature photographer/videographer not a professional. Software is my forte).
My questions at this moment are to do with hardware software capabilties and workflow.
My first project (of many I hope) is a make some corporate videos in HDV format for online marketing purposes (kind of like the videos Adobe have for CS3 - http://www.adobe.com/creativelicense/) and possibly to produce DVDs of the same.
My first question is; Given the hardware and software, will I be able to do what I need? I really hope I don't have to go buy any more hardware. I don't mind having to do one or two more steps. to achieve the end goal (initially).
Starting with the mode to shoot in (for the purpose stated above), what is my workflow going to be?
i. What is the best mode to shoot in? (24f, 30f, 60i)
ii. How do I get the video from the MiniDV tape onto my HDD and then into Premier Pro.
iii. I need to be able to compisite multiple HDV clips to produce the final cut. Is the hardware and software good for this? On a scale of 1 to 10, what can I expect in terms of productivity.
I've heard elsewhere that Premier Pro just don't produce true HD quality results. Is this earlier versions.
What format/compression and dimension is the best for online viewing (I want to retain the HD quaility as far as possible.)
Thank you all for listening and hope to hear your opinions.
Shiv.

Steven,
Thank you for your quick reply and information there in. The video is very nice too. Great angles and composition.
So I guess, I'm going to have swap my drive and re-install my OS when the machine arrives.
I'm not going to be able to capture directly to my desktop (due to poratability reasons). So is there I way in Premire CS3 to uncompress the HDV from the camera and store it in my HDD in uncompressed format? I don't mind having to do this extra step each time if the post production experience is going to be better.
I've heard a lot about Aspect HD from you and others here as well as other forums. I'm not very video savvy yet and don't understand a lot of the vocabulary used :). I've been to their website and don't get what their products are supposed to give me either (I guess their audience understands exactly what they are saying).
What I do get is it decompresses the MPEG 2 to saves it to yout HDD for editing purposes. However, I would have thought the Premier Pro CS3 would have that capability as part of the product, no?
I'd also like to use footage that is not HDV as well as photos/images (composits) but still retain the final cut to be HDV quality. Is this possible and if so, what does it do to the editing experience/performance?
Will I be able to output the final cut back to my camera's Mini DV tape (without having to buy Aspect HD)?

How to use voltage signals as input signals into USB-6211

Hello everyone,
I have a USB-6211 and a PDQ80A -quadrant photo detectot from thorlabs, i am trying to take three voltage signals from the PDQ80A into my PC using USB-6211 from NI. THese voltage signals are X,Y and sum (X+Y).
Looking forward to your reply.
Thanks in advance,
_Perseus

Technically, the question was in the title. But of course, the answer to that is... Connect them using WIRES. It's designed for voltage signals, just wire your cell outputs to whatever DAQ input channels you're going to read.
Using LabVIEW: 7.1.1, 8.5.1 & 2013

Usb 6211 and LabView - good for IV characteristic aquisition?

Similar Messages

Maybe you are looking for