Usb 6501 unresponsive causing BSOD(Blue Screen Error)

There are a lot posts about the same issue but mine is a little peculiar so i decided to post it.
I am using two usb DAQ in the same pc(usb-6501, usb-6001), connected to the usb port on the back. The usb-6501 is used to obtain digital inputs from read switches, Sensors through an ssr. The usb-6001 is used to control 2 double valve solenoid, 1 dc motor, 2 indicator lamps. usb-6001 is also used to read analog values of current(using hall effect sensor) and voltage(using potentiometer).
At first i was facing problems with the usb-6001(the usb-6501 was working fine at this point) resetting during operation accompanied by BSOD. Then i learned it was due to my relay, which requires 30 mA of current to switch so i used the ULN2003a to interface the usb-6001 with the relays and after that the application was running perfectly for 4 days.
Now the usb-6501 is having the same problem and when i perform "Self Test" from NI MAX it shows "Error Code:50405" and i am able to reset the device from NI MAX only sometimes, other times i would have to unplug the USB device then plug it back in. As the application is used for an automated test rig the customer is frustrated by this problem. Once the card becomes unresponsive(or after the card is reset) BSOD occours.
I have checked all the device drivers and OS for any errors but they are fine. i have even tried changing the ram to solve the BSOD with no use.
System Details:
Windows 7 SP1
NI MAX 14.0
power saving is disabled
I have attached the latest mini dump files as they might help in finding out the reason behind this problem(File extensions changed for the purpouse of uploading).
I need to know: Is there any permanent solution for this problem? and what is the reason for this problem.
Attachments:
060115-12480-01.txt ‏315 KB
053015-12324-01.txt ‏315 KB
052615-17440-01.txt ‏315 KB

Additional info : i did an analysis of the dump files and this is the result
0: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff88009fe10b1, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800657922e, address which referenced memory
Debugging Details:
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032c30e8
fffff88009fe10b1
CURRENT_IRQL: 2
FAULTING_IP:
nifslk+822e
fffff880`0657922e 0fb650ff movzx edx,byte ptr [rax-1]
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
TRAP_FRAME: fffff80000b9c6b0 -- (.trap 0xfffff80000b9c6b0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff88009fe10b2 rbx=0000000000000000 rcx=0000000000000000
rdx=fffff80000b9c8e0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800657922e rsp=fffff80000b9c840 rbp=fffff88009fe10b1
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
nifslk+0x822e:
fffff880`0657922e 0fb650ff movzx edx,byte ptr [rax-1] ds:c8e0:fffff880`09fe10b1=??
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80003091be9 to fffff80003092640
STACK_TEXT:
fffff800`00b9c568 fffff800`03091be9 : 00000000`0000000a fffff880`09fe10b1 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff800`00b9c570 fffff800`03090860 : fffffa80`06adc250 fffffa80`05c3a060 fffffa80`06adc250 00000000`0000ffff : nt!KiBugCheckDispatch+0x69
fffff800`00b9c6b0 fffff880`0657922e : fffff880`05d47468 fffff880`01d91f90 00000000`00000000 fffff880`09fe0770 : nt!KiPageFault+0x260
fffff800`00b9c840 fffff880`05d47468 : fffff880`01d91f90 00000000`00000000 fffff880`09fe0770 fffff880`09fe17a0 : nifslk+0x822e
fffff800`00b9c848 fffff880`01d91f90 : 00000000`00000000 fffff880`09fe0770 fffff880`09fe17a0 fffff880`09fe10b1 : 0xfffff880`05d47468
fffff800`00b9c850 00000000`00000000 : fffff880`09fe0770 fffff880`09fe17a0 fffff880`09fe10b1 fffff800`00b9c8e0 : nipalk+0x75f90
STACK_COMMAND: kb
FOLLOWUP_IP:
nifslk+822e
fffff880`0657922e 0fb650ff movzx edx,byte ptr [rax-1]
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: nifslk+822e
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nifslk
IMAGE_NAME: nifslk.dll
DEBUG_FLR_IMAGE_TIMESTAMP: 51f2daeb
FAILURE_BUCKET_ID: X64_0xD1_nifslk+822e
BUCKET_ID: X64_0xD1_nifslk+822e
Can anyone help me with what this means?

Similar Messages

Deskjet F4280 causes constent blue screen errors

The moment I installed the printer the printer the errors started. Uninstalled the printer for 4 days, not a single error. I Can't keep the printer installed. What a waste of money!

you've done well

Blue screen error Windows 7 after June 2014 Windows updates

Hi,
just wondering if someone could help determine the cause of a blue screen error from interpreting the following minidump file. My PC has been having blue screen problems after getting the automatic windows updates recently. Initially the only way I could
get the computer working was to restore the system back to prior to the updates. The updates seem to have now successfully installed but are still causing occasional blue screen errors. I have Windows 7 Home Premium
The minidump is 061614-32666-01 andthe link is as follows:
https://onedrive.live.com/redir?resid=1665B282DEF2D2DC%21111
Any help would be appreciated

Hi,
just wondering if someone could help determine the cause of a blue screen error from interpreting the following minidump file. My PC has been having blue screen problems after getting the automatic windows updates recently. Initially the only way I could
get the computer working was to restore the system back to prior to the updates. The updates seem to have now successfully installed but are still causing occasional blue screen errors. I have Windows 7 Home Premium
The minidump is 061614-32666-01 andthe link is as follows:
https://onedrive.live.com/redir?resid=1665B282DEF2D2DC%21111
Any help would be appreciated
These crashes were related to memory corruption (probably caused by a driver).
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Since it is more likely to be a driver please run verifier first.
1-Driver verifier (for complete directions see our wiki here)
If verifier does not find the issue we can move on to this.
2-Memtest. (You can read more about running memtest here)
If you cannot boot after enabling verifier reboot into safe mode
In Vista & win & (F8)
In win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-windows-8-the-easy-way/
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Windows 7 Blue Screen Errors (with Apple Time Capsule)

Can anyone tell me whether Apple has found a way to make the Apple Time Capsule work with Windows 7 without causing a blue screen error every time it is used? BTW, it works perfectly on Windows XP and Windows Vista.
Note: The Apple Time Capsule does not yet support Windows 7 (see specifications).

Can anyone tell me whether Apple has found a way to make the Apple Time Capsule work with Windows 7 without causing a blue screen error every time it is used? BTW, it works perfectly on Windows XP and Windows Vista.
Note: The Apple Time Capsule does not yet support Windows 7 (see specifications).

Blue screen error after USB connection

hello, I have a new 8100. All is great, all is working, but the problem appeared after I installed the software and I connected the mobile to the computer by USB... the blue screen error of Windows Vista appeared and then
after the automatic reboot of my computer
it said the following mistakes:
"Firma con problemas:
Nombre del evento de problema: BlueScreen                        ( name of the problem )
Versión del sistema operativo: 6.0.6000.2.0.0.768.3             ( OS version )
Id. de configuración regional: 3082                                    ( regional configuration ID )
Información adicional del problema:                                    ( aditional info on the problem )
BCCode: 4e
BCP1: 0000009A
BCP2: 0003EA16
BCP3: 00000006
BCP4: 00000002
OS Version: 6_0_6000
Service Pack: 0_0
Product: 768_1
Archivos que ayudan a describir el problema:       ( files which help to describe the problem )
C:\Windows\Minidump\Mini010609-03.dmp
C:\Users\antonio\AppData\Local\Temp\WER-110323-0.sysdata.xml
C:\Users\antonio\AppData\Local\Temp\WER6C68.tmp.version.txt
Lea nuestra declaración de privacidad:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0c0a
I hadn't anything wrong with my Vista OS before
thanks in advance
Solved!
Go to Solution.

Hi and welcome to the forums!
I don't read Spanish very well, but did you leave the Blackberry plugged in when you
rebooted the PC? Vista might have tried to used the BB as a drive for error checking or system functions.
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Iphone upgrade has crashed my Iphone and causes blue screen error on PC

I just tried to upgrade my software and half way through my PC crashed. It said a blue screen error had occurred.
Itunes now shows that my phone needs to be restored, but everytime I try to do my PC crashes again. This has now happened three times in 1 hour. I have Itunes v.8.0 on my pc but this hasnt been a problem till now. I am so angry that I have lost everything on my phone due to a problem like this. Can anyone advise how I can restore my phone without totally killing my laptop?

With the blue screen it can be a few things that are interifering with it. First thing unplug anything from the usb ports on your computer and if you have like a logtech webcam make sure it is unplugged and also that if it is built in disable the driver. If you are on a pc you may want to go into device manager and update your usb drivers on your computer.
use these articles
http://support.apple.com/kb/TS2280
http://support.apple.com/kb/TS1502

Blue screen error (BSOD) during and after installation of Windows 7

I had to reinstall Windows 7 via the recovery partition. During the installation I kept getting Blue screen errors and even now I am still getting BSOD within minutes. I have no problem in safe mode.
My laptop is a Satellite C650D-12C. I wanted to update BIOS but I can't in safe mode. What should I do next?

Recovery image saved on HDD is tested so everything should be OK with recovery image installation.
What you can try is to use Microsoft installation disc to see if the same will happen again.
If yes, Im afraid you need professional help with this. Notebook has probably valid warranty so the service guys should check this.
Have you created recovery DVD?
BTW: I think BIOS update is not solution. Recovery installation must work with this original BIOS version.

I am trying to connect my iPad to my windows pc ( xp) but it does not recognise the iPad and I get a blue screen error causing the pc to shut down. Any ideas

I am still not able to connect my iPad 2 to my Pc ( windows xp). When I try to do so I get a blue screen error and the computer shuts down. I have reinstalled iTunes. iPod works fine. Any ideas?

Not sure, but try these.
Disable your firewall and anitvirus software temporarily.
Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
 Cheers, Tom

Getting Blue Screen error BCCode: 1a

Sometimes mi PC with windows VISTA have espontaneus Blue Screen Error.Then after startup I would get this message,can someone tell me what I shshould do?
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 11274
Additional information about the problem:
BCCode: 1a
BCP1: 00041790
BCP2: C08020AC
BCP3: 0000FFFF
BCP4: 00000000
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\Mini093014-01.dmp
C:\Users\jgalante\AppData\Local\Temp\WER-61171-0.sysdata.xml
C:\Users\jgalante\AppData\Local\Temp\WER140F.tmp.version.txt
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0c0a

Hi,
Bug Check 0x1A: The MEMORY_MANAGEMENT bug check has a value of 0x0000001A. This indicates that a severe memory management error occurred.
You can refer to the link below for more details about this error:
http://msdn.microsoft.com/en-us/library/windows/hardware/ff557391(v=vs.85).aspx
When you encounter a BSOD (Blue Screen of Death) in Windows the computer will save information regarding the error message in a log file. This log file or minidump file is saved in the Minidump subdirectory under Windows (C:\Windows\MiniDump). Generally
the information saved in this minidump file can help pinpoint the cause of the blue screen error message and help you in resolving the problem.
Roger Lu
TechNet Community Support

Blue Screen Error on Satellite A100-920 (PSAA9)

Hi
I had a blue screen error during normal use and after restart, Windows suggested updating the BIOS, so I updated it with the latest version (5.10). The next day, I got another blue screen and on restart, Windows suggested I update my display drivers, which I did (to ver. 8.241)... I have an ATI Radeon X1400 GPU. After doing that, the computer crashed every time it loaded windows, with a popup about services.exe telling me the computer would turn off in 60 seconds.
I assumed this was related to the display driver, so I replaced the drivers with an earlier-dated version (8.241-034065C). After I did this, it seemed to work and I could use the computer fine for a bit, even play games such as GTA but i am starting to get the blue screens again, usually just when opening folders, etc and not when running graphics-heavy applications. The problem definitely goes away when I disable my display drivers, but that's not much of a solution.
I turned off the reboot on error setting and this is the information from the blue screen of death:
*** STOP: 0x0000008E (0xC0000005,0xEE6DF5E9,0xBAD2F99C,0x00000000)
*** system32:huy32.sys - Address EE6DF5E9 base at EE6DD000, Datestamp 45abe717
Does anyone have any idea how I can sort this problem, it's driving me crazy!
I have downloaded the Omega drivers for the card, but am slow to install them as I hear they can cause overheating and I think ATI/Toshiba should be able to provide me with a solution without me having to use third party drivers.

I have Network Associates (McAfee) v. Enterprise 8. I ran a full virus scan with this and windows defender and a worm stinger utility and another microsoft app whose name I forget... all came up clean.
I tried the omega drivers out of frustration and they cause services.exe to terminate.
Could it possibly be a BIOS issue? I'm not sure how likely it is, since the computer definitely works with the display adapter enabled and will usually crash (BSOD) after anything from a few mins to a few hours with it enabled. I seem to be getting two types of reply from microsoft on restart, one saying there is a general driver fault and one saying there is a display driver fault and suggesting updating the display drivers.

Blue Screen Error after Synching

I had Blackberry Desktop Manager 7 installed on my WIndows XP machine...I have been getting Blue screen errors frequently after my Outlook is synched wiht the device..I was on BDM 6 prior to this and used to consistently get Blue Screen Errors. I used to think there was some other issue with the laptop until recently when I got a new one and I installed The desktop manager.
Once i realised that, I uninstalled the Software from my desktop yesterday but I read a lot of blogs that said that the BSOD will continue to come as your normal uninstalls are incomplete..Could you let me know how this can be fixed? Do you have a stable version of the desktop manger that doesnt give a BSOD?
I need to sync my device with Outlook everyday..and I cannot afford BSOD's everyday..

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
BSOD's are actually more rare of a problem, from what I've seen, and often indicate something more core wrong with the actual PC, Windows installation, or something else...and the RIM Desktop Software is simply revealing this deeper flaw rather than being the cause of it. In the worst case scenarios, I've actually heard of folks doing a clean rebuild of their PC (e.g., reinstalling Windows from scratch) and that rectifying the problem.
Ohhh...one last thing:
jinugeorge wrote:
Do you have a stable version of the desktop manger that doesnt give a BSOD?
FYI -- From the wording, I suspect you are misunderstanding the purpose of these forums. This is a user-to-user community, not a user-to/from-RIM channel for any communication whatsoever. So, by "Do You", you are actually asking that of other users, "out there", just like you who happen to be volunteering time to help others out.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blue Screen error !!! 0x00000101

Hi
sorry if my english is`t that good....
I recetnly have a problem with my windows...
this blue screen error often appeare when I playing games...
Os: win 7 32B
Ram : 4g
Cpu : core i3 2100
and this is my minidump error that windows saved : http://0up.ir/up7/9-010210-15958-01.rar
for more information i can tell u that i reistall my windows and defrag hard and error cheack my HDD

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT Troubleshooting
Here's a good thread on http://www.sysnative.com/forums/showthread.php/1248-0x101-quote-A-clock-interrupt-was-not-received-on-a-secondary-processor-quote
What you're looking for will be in one of the following categories:
a) BIOS bug
b) a driver whose activity is causing the target processor to lock up
c) a hardware defect (temperature, voltage, dust, RFI, outright borkedness...) ?I wonder about CPU defect also)
So, check the drivers http://www.carrona.org/dvrref.php
Then check the inside of the case (temperature, voltage, dust, etc).
Then run hardware stress tests
Try this free video stress test: http://www.ozone3d.net/benchmarks/fur/
    FurMark Setup:
    - If you have more than one GPU, select Multi-GPU during setup
    - In the Run mode box, select "Stability Test" and "Log GPU Temperature"
    Click "Go" to start the test
    - Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
    - Click "Quit" to exit
Try this free stress test: Free Software - http://download.cnet.com/Prime95-32-bit/3000-2053_4-192895.html
    Prime95 Setup:
    - extract the contents of the zip file to a location of your choice
    - double click on the executable file
    - select "Just stress testing"
    - select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
    - "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
    The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
    Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
    The Test selection box and the stress.txt file describes what components that the program stresses.
More Video Stress Tests:
    1. Thanks to Vir Gnarus (http://www.sysnative.com/forums/members/vir-gnarus.html) for finding this video memory test: https://simtk.org/home/memtest
Alternate download link (w/o registration) located here: http://folding.stanford.edu/English/DownloadUtils
    2. Two other video stress tests (may be more stressful than FurMark):
NOTE: I have had reports that some ISP's will block this website
Video Memory stress Test - http://nvworld.ru/utilities/vmt/
Artifact Locator - http://nvworld.ru/utilities/alocator/
Sorry, but I don't read the language that this website is made in.
    3. Another interesting test that came to my attention: http://www.ocbase.com/perestroika_en/index.php?Download
    USE AT YOUR OWN RISK - the program doesn't have a whole bunch of safety features to protect you from yourself!
    Quote:
    CPU Stress Tests:
    Only need to run 1 or 2 of the tests under most circumstances. I haven't used any of the tests myself, so I listed all that I was able to find.
    - http://downloadcenter.intel.com/Deta...19182&lang=eng
    - http://7byte.com/index.php?page=hotcpu
    - http://www.7byte.com/index.php?page=burnin64
    - http://www.overclock.net/general-pro...ress-test.html
    - http://www.fossiltoys.com/cpuload.html
    - http://www.pcworld.com/downloads/fil...scription.html
    - http://www.overclock.net/general-pro...ress-test.html
    - http://majorgeeks.com/CPU_Stability_Test_d215.html
    - http://www.xtremesystems.org/forums/...d.php?t=201670
    - the test(s) suggested at this link are bootable: http://www.techsupportforum.com/foru...ml#post2232929
Then try replacing parts.
Then look up the versions of your BIOS to see what changes were done.
Recently it was found (here: BSOD Stop 0x00000101 and Stop 0x0000009c ) that a wipe and reinstall of Windows fixed a STOP 0x101 problem. I'd have to recommend at least running SFC.EXE /SCANNOW on any PC that has this problem (simply because it's too easy easy
to do and it may fix things).
Wanikiya and Dyami--Team Zigzag

Blue Screen Error when syncing ipod touch 4g 32gb with i tunes 10 on Vista

Hi
I'm trying to sync my ipod touch 4g with my itunes 10 using a Dell XPS with Windows Vista. After the point where the songs begin to copy (around 5 mins to 30 mins into copying) a blue screen error is caused and the computer shuts down automatically. The blue screen error ID is 2057.
I have scanned for viruses and its clean, tested my hardrive and its all ok, and now been to apple and got a replacement ipod and usb, re-installed i tunes 10 BUT its still happening.
i'm not sure what to do next ..any suggestions??
BTW my computer works fine until I try syncing the ipod so it's definitely something related to it.

Just in case anybody is interested I managed to resolve the problem. Not sure if it was a just a co-incidence but after windows had auto-removed itunes 10, I plugged in the ipod and the computer recognised it as a working piece of hardware, although it actually thought it was a camera (not sure if that's normal).
Anyway I re-installed itunes10 but kept the ipod plugged into the usb all the time. When itunes had installed, i began the sync and the files copied far more quickly than in previous attempts. They are all on now and the ipod is working fine and no blue screen errors.
What probably happened is that when windows auto-fixed errors after the last crash(it didn't run an auto-fix after previous crashes), it fixed the error which was crashing itunes10 when syncing. I hope nobody else has this problem and the ipod remains ok.

ITUNES downloads from store causing BSOD windows stop error- Please Help!

Hi everyone,
maybe someone can help me out or knows how to fix this problem.
Problem in detail:
This problem started since I updated to the latest version of itunes 7 to download video for my ipod video 30gb. Itunes worked perfect on my computer before updating as I used it with an ipod mini.
I was able to use my new IPOD 30gb fine and transfer all my music to it correctly.
The main problem occurrs when downloading anything from itunes store...1st noticed this when my podcasts were updating and downloading and then the system suddenly crashed with the windows blue screen error message and had to reboot. This happened multiple times so I disabled the automatic downloads of podcasts. Itunes then works fine when not downloading anything.
I then tried purchasing a TV show, whole series, and when it began downloading, the Exact same Error and Blue screen will occur--Very Frustrating.
I uninstalled ITUNES and Quicktime, and then reinstalled them via the latest download from itunes. The same errors still occur.
When windows reboots and sends error report to Microsoft, it states the error is due to a Driver error of which the specific driver is not known.
I have called apple/itunes support and spoke with them and they could not figure out the problem and said I should check with my computers cust service and/or microsoft as it was probably something on this end...I did this and they stated the problem must be something with itunes and especially since all other programs run fine on my system.
SO basically I am going in circles trying to figure this out so I am hoping someone here may know how to fix this problem.
Not only that, but I tried the same on my desktop as I figured I could at least download my podcasts and purchases to my desktop and then transfer to my ipod from there(as I am mainly using my labtop for my ipod) and updated my desktop to itunes 7 latest version,, and figured it would work on my desktop with same operating system----but it Caused the SAME error BSOD as my labtop and in same fashion....only when downloading from itunes.
ANy help is much appreciated as I got the ipod video mainly because of ITUNES video content and podcasts and if I cannot use these major functions on ITUNES than This Was a Complete Waste for me to get the Video IPOD.
Hope there is a way to fix
Thanks

I afraid can’t help much with this, but no one else
has answered. It does seem very odd that two
different computers have the same problem. It makes
you wonder about the content you were trying to
download. As a matter of interest was the
installation for both computers done from the same
download file?
When your computer dies, can you read the stop
message or does it disappear, if it does, go to
Control Panel>System>Advanced
Click Settings in Start Up and Recovery and make sure
that Automatically Restart is no checked.
You should be able to get a stop number from the blue
screen and you may also be able to identify the
filename of a driver, which could give a clue to the
problem.
The Microsoft Website has a certain amount of help on
specific stop messages, you can search for the number
of the stop message which will be something like
0x0000000A.
There is also some help on troubleshooting stop
messages here:
http://aumha.org/win5/kbestop.htm
Thanks for your reply.
As far as the content being downloaded from itunes---consisted of different podcasts and also on a separate occasion-the tv show Heroes complete season on ITUNES..So I would guess the error has nothing to do with the content being downloaded.
The ITUNES installation for both computers was from the same itunes download file on this website on apples itunes free download.
I did not write down the most recent stop numbers and no drivers seemed to be named on the blue screen from what I could tell, but I guess I could be missing something...
From a previous crash with the BSOD- the error message listed was this: STOP: 0x00000050 (0xbad0b158, 0x00000000, 0x8056ea22, 00000002)
not sure if this helps maybe figure out the cause of this or not.
Maybe this will help get to the bottom of this.
Thanks

Blue screen error 1gdpmd64.sys

I have a hp pavillion g7 notebook computer which keeps getting a bsod crash each time internet graphics are accessed. i have researched the error code and it seems to be a graphics driver issue. I downloaded a new version of the amd graphics driver from the hp website support and i tried to restore the computer to a previous point in time when the bsod was not occuring. All to no avail. the webpage graphics are not able to be displayed and the blue screen error keeps returning. In the device manager section of the computer, none of the icons are showing issues and i can't figure out what could be causing the problem. Any suggestions would be greatly appreciated. thanks

Hi beold,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are suffering from a BSOD. Can you provided more information on the error message that you are getting? Have you tried a different browser to see if the same error occurs. What is your product number? What operating system are you using?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Usb 6501 unresponsive causing BSOD(Blue Screen Error)

Similar Messages

Maybe you are looking for