USB Capture device driver

Hi,
I have written a user space USB driver for our Enciris LT101 video capture board using libusb.
Now I want to make the device appear in Video Device list and access it through quicktime. Is it possible to write a "virtual driver" using quicktime component or any other mechanism to make the device appear in video device list?
PS: I did the same under windows writing a directshow source filter and hacking the interfaces in the right way so that the device appears as if I have used AVStream kernel mode driver.
Thanks, Malik

Thanks for feedback,
That is already a start. I am indeed searching of keywords like "Sequence Grabber".
Do you know if I can grab already compressed video with that interface?
Is there another way to enumerate and present devices in QuickTime available "device list" that will also work for 64 bit?
I heard about macam driver...

Similar Messages

Fmle TURN OFF WHEN I CHOOSE USB CAPTURE DEVICE

USING WINDOWS 7 64 BIT SOFTWARE when i turn on fmle it comes on and uses the built in webcam on the computer but when i switch to the usb capture device it turns off. ANY ONE KNOW HOT TO FIX THIS

Gen2ly wrote:
This is the rule I think eldragon is talking about:
http://wiki.archlinux.org/index.php/Syn … _detection
if it is, it doesn't work for me anymore either. Not sure why.
I did it before posted there. Any ideas?

USB capture device?

I've been looking for a usb capture device with either component or hdmi inputs and outputs a 16:9 aspect ration for my macbook and haven't found anything... anybody know of anything???

Was just looking for the same thing, I just need to capture from component. Found this from Blackmagic Design,
http://www.bhphotovideo.com/bnh/controller/home?O=cart&A=details&Q=&sku=558914&i s=REG
Hope it helps!

HDMI USB capture device

Does anyone know which USB HDMI capture devices are supported with Skype? I have already learned that a device needs a UVC driver for it to work. (USB video class) but most products dont have this information in their spec sheet. I already mailed Elgato about their HDMI USB capture products and they responded that the video can only be pulled into their application and other applications such as Skype would not detect it as a video source. Does anyone have a confirmed solution? It needs to be a USB solution so internal capture cards are not an option. And I cant exactly go buying stuff left and right and returning it before finding something that works. Greetings,

Was just looking for the same thing, I just need to capture from component. Found this from Blackmagic Design,
http://www.bhphotovideo.com/bnh/controller/home?O=cart&A=details&Q=&sku=558914&i s=REG
Hope it helps!

How do I re-install the apple USB mobile device driver once it has been deleted?

Hi,
I was having issues getting my Itunes to recognize my Iphone 4s so I followed the apple support instructions here: iOS: Device not recognized in iTunes for Windows and it said to delete the driver software (Step 2 of Reinstall the Apple Mobile Device Driver). After I did that I have been unable to get any of the steps that follow to work. Is there any place that I can download the Apple mobile device USB Driver software? I have tried numerous things including re-installing Itunes multiple times but this does not appear to reinstall the driver software. Any help is greatly appreciated.
Thanks,
Brian

Try these steps:
In the Device Manager window, right-click "Universal Serial Bus controllers" and choose "Scan for hardware changes" from the shortcut menu.
Locate the Apple Mobile Device USB Driver in this list. If the Apple Mobile Device USB Driver is not listed, continue to step 3.
Expand all the sections labeled below (not all sections may be listed):
Imaging Devices
Other Devices
Portable Devices
Universal Serial Bus Controllers
Look for the entry that recognizes the device as a camera. This entry should be called Apple iPhone, Apple iPad, Apple iPod, or Unknown Device. (Verify the Unknown Device is the Apple Device by unplugging the device and scan for hardware changes again [Step 1] to see if it disappears.)
Right-click the Apple iPhone, Apple iPad, Apple iPod, or Unknown Device entry in Device Manager and choose Update Driver from the shortcut menu. (Verify the Unknown Device is the Apple Device by unplugging the device and scan for hardware changes again to see if it disappears.)
Click "Browse my computer for driver software."
Click "Let me pick from a list of device drivers on my computer."
Click the Have Disk button. (If the Have Disk option is not present, choose a device category such as Mobile Phone or Storage Device if listed, and click next. The Have Disk button should then appear.)
In the "Install from Disk" dialog, click the Browse button.
Use this window to navigate to the following folder:
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. instead).
Click OK in the "Install from Disk" dialog.
Click Next and finish the driver-installation steps. Open iTunes to verify that the device is recognized properly.

Premiere Elements doesn't see my Siig USB capture device.

The topic heading pretty much say's it all. My webcam shows up as a capture device, but not my Siig. I don't remember the model of the Siig and it's not printed on the device, but it was cheap ($29). However, the crappy capture software that came with it sees it fine, as does Windows Media Encoder. So, why not Premiere Elements?

"Premiere Elements doesn't capture video over a USB connection"
I'm a bit surprised by that, but it would perfectly explain what I'm experiencing. Thanks.

Virtual video capture device driver for screencapture available ?

Does anybody know a way to get screen capture in form of a virtual video capture device? I know there are drivers available for other OS (e.g. Windows), but is this possible with OS-X too ?
I want to use the screencapture not only in iChat, but in Flash based videoconferencing/streaming solutions as well, so the normal screen sharing would not work.
thanks for any help, Mark

Hi,
At one time this was Bundled on Some Macs
http://www.ambrosiasw.com/utilities/snapzprox/
It will let you capture a segment of your Screen with or without Audio
8:07 PM Sunday; March 9, 2008

Help usb capture decives that work with FME ?

I have tried both the Dazzle dvd 100 and the pinnacle PCTV HD
pro stick and neither of them work properly, mostly give video but
no audio. has anyone tested and got a usb capture device working
with media encoder? if so what device and how

avidvid, thank you for you advice. I did check the system profiler and the device is
recognized, but to no avail. In fact it is getting worse. When I initiate log and
capture I can hear the transport working. It is moving all the time even though
the capture window is now only showing the color bars. The "beach ball" is now
constantly whirling and will only stop when the "deck" is turned of at the source.
I am worried that I have messed up the reinstall. I am really not sure how much
"stuff" I must remove from the system, or whether to reinstall the entire suite.
Thanks again for your trouble.

Help- usb capture board and FME

I have tried both the Dazzle dvd 100 and the pinnacle PCTV HD
pro stick and neither of them work properly, mostly give video but
no audio. has anyone tested and got a usb capture device working
with media encoder? if so what device and how

That you need is set the property node of the image display to make it visible or invisible. This an example
Attachments:
CapturaCamara.vi ‏62 KB

Can't get driver to work with ezcap usb 2.0 video capture device on windows 8.1

I have an ezcap video capture device that works fine on my windows 7 machine but will not work in windows 8.1. The software (arcsoft 3.5) functions properly but will not let me select the video grabber as a source. The driver itself indicates not compatible with 8.1 and the there are no drivers out there that I can find to address this issue? Any known solution would be helpful.

Hi,
It is not from HP. Please try driver from the following link:
http://www.ezcap.tv/ezcap116-drivers?zenid=r53fvgj1n510tdme9itqc9ql52
(After the first screen shot).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Capturing Hi8 Tapes - My capture device is USB or S-Vid / Component Out. Will Premier Pro CS6 Recognize this device?

AVerMedia DarkCrystal HD Capture SDK Video Capture Device. I'm trying to capture the video uncompressed so I retain as much resolution as possible. I can edit to other formats from there later. I'll be playing these tapes from the camera.
Link:
B&H Photo Video
Product description says:
Third Party Software Support
The DarkCrystal HD Capture SDK is designed to provide interoperability with a number of widely used video editing, encoding, streaming, and playback applications found on the Windows platform. These include:
Adobe Premiere Pro CS6
Sony Vegas Pro 10
Windows Media Encoder 9
GraphEdit
AMCap
Adobe Flash Media Live Encoder 3
Corel VideoStudio
CyberLink PowerDirector
CyberLink PowerProducer
Real Producer (v13)
VLC Media Player
Image J

No version of Premiere (Pro or Elements) will work with ANY device that does not connect to a Firewire port
EXCEPT... you may buy a card (I think Blackmagic is one) and then use the device driver supplied by the vendor to "link" the card to Premiere (I did this back in 2002 with a Pinnacle DV500 card)
Premiere will NOT work with a USB device... as I said above... you may use a TI chip for adding a firewire card http://forums.adobe.com/thread/940242 to then use something like a Grass Valley product

Apple iPod USB Device driver issue on Win XP - syncing shuffle 2nd gen.

Hello fellow iPod shuffle users. Any of you run into this problem using the following configurations? Any advise/recommendations/workarounds much appreciated as I've burned 3 days on this issue and I'm still stonewalled.
I personally think it's a device driver issue/bug and am searching for a way to update my Apple iPod USB device driver for Win XP. Two brand new ipod shuffles (received for Christmas 2008) are both behaving this way, so the problem most likely points to a global software issue more-so than to shuffle hardware issue.
PROBLEM STATEMENT: Driver data i/o streaming issue does not allow shuffle to sync data with iTunes after initial sync (i.e. reading the content of the shuffle is good, but writing modified content fails). Posted error message "The ipod ... cannot be synced. Required disk cannot be found". After cracking the hood on my device driver, the problem seems to point to the Apple iPod USB device driver for Win XP. Driver will recognize the shuffle and read to it, but subsequent write attempts will result in device driver balks that "this device cannot start (code 10)".
ATTEMPTED WORKAROUNDS:
*Read All "How to Get Started Manuals" to make sure I was using the right technique for syncing my two shuffles from within iTunes... tried and failed
*Ensure only one shuffle was plugged in at a time (saw notice that two shuffles plugged in at the same time is not yet a supported config)... tried and failed
*The 5 R's as recommended by Apple Support... tried and failed.
*I've tried all 3 built in USB ports on my Lenovo T60. no love... tried and failed.
*Per discussion board: From Window's Device Manager-> Scaned for new hardware while shuffle was syncing...tried and failed.
* Per Discussion board: From Window's Disk Management -> Ensured shuffle came up as a FAT32 filesystem... connection tore down as quickly as windows recognized it.... tried and failed.
*From Windows Software config utility: Ran repair to re-install itunes 8... same results.
*From Windows software management utility: Uninstalled and reinstalled itunes 8... same results.
Hardware: IBM Thinkpad/Lenovo T60. Using build in k/b & no external mouse. Has 3 USB built in ports.
Software: Windows XP Pro SP2/iTunes 8.0.2/shuffle (2nd gen) driver 1.0.4 (same behavior using the original driver 1.0.3).
Apple iPod USB Device properties:
Driver Provider - Microsoft
Driver Date - 7/1/2001
Driver Version - 5.1.2535.0
Digital Signer - Microsoft Windows Publisher

Hi. Ive got pretty much the same problem.... Got a new shuffle for christmas..having real problems syncing with itunes. Funnily enough I managed to get 25 tracks on it but then it just stopped. error message says " The ipod shuffle cannot be synced. The required disk cannot be found." Ive done restore, and downloaded a reset utility thingy to try but still no joy.

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Tim

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
David

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
David

I need to back up my imac running Tiger (no time machine) so that we can upgrade OS. It is set up for multiple accounts. How do I capture all files in each account using newly purchased USB external hard drive?

I need to back up my imac running Tiger (no time machine) so that we can upgrade OS. It is set up for multiple accounts. How do I capture all files in each account using newly purchased USB external hard drive? Thanks!

Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Or you can simply use the Restore option of Disk Utility to clone the drive to the backup:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

How to add and configure a usb device driver in SRSS for Sunray?

Dear Sir,
If I want to use a usb device on Sunray 2 (the usb device is plugged into Sunray's usb port), and I have been developed a usb driver on Solaris 10. Can I install the same driver in SRSS host to active the usb device in Sunray? If it can, how do I configure SRSS and where is the location of SRSS drivers? Can I use add_drv similar command to add my driver to SRSS?
The second question is when I plug-in a usb device to Sunray, can I see device information (VID, PID, and so on) in any log file or by any command as "prtconf -v" on Solaris?
Thank you very much.
Best Regards,
Steven

What sort of USB device do you want to use ?
The peripherals chapter in the SRSS admin guide tells you how to use supported USB devices.
http://docs.sun.com/source/819-2384/dev.html
Drivers written for Solaris devices will not work with Sun Ray devices. If you want to write a device driver for Sun Ray, it is recommended you use libusb for a userland driver. See libusb notes on same chapter mentioned above.
There is currently no SRSS utility to list Sun Ray device parameters like prtconf does.
You could write a libusb application to do this, or use the test program described here:
http://libusb.sourceforge.net/doc/examples.html

USB Capture device driver

Similar Messages

Maybe you are looking for