USB Mic & CS6... (heard this question a lot, but I'm dumb.)

I've got CS6... Windows 7... plenty of speed, and RAM.... And a USB Snowball mic.
I'd like to be able to monitor by vocals while I'm recording... can't quite figure out why I can't do it.
I also have a M-Audio FastTrack Pro if I need it... Not sure I do sense I'm using a USB mic. But I thought by plugging my headphones into it, it might help with any latency issues...
nope.... can't quite figure that one out either...
Any help would be greatly appreciated.
Might even send you a Starbucks card.
(in other words, I'm desperate)

I was hoping somebody else would dive in on this one (because it's not a simple answer) but in light of the silence, I guess I better speak up.
You've just found one of the drawbacks of basic USB microphones--they're a one-way device only with no facility for monitoring in a world where the computer is set up for a "sound card" which is a two way device. (Some of the better USB mics do have built in monitoring by the way--and tend to work well.)
Anyway, you need to tell Audition to use to different devices, the mic for recording and either your M Audio or the built in sound card for playback/monitoring. The menu to do this is under Edit/Preferences/Audio Hardware.
Alas, this is where it descends into trial and error since there's a lot that can go wrong in terms of drivers between the mic and the other sound card being incompatible. You may need to experiment with ASIO and MME and hope that both devices can work with one of these.
The other thing is that, to give Audition the right selection, you may need to go into the Windows 7 Audio menu and manually select the two proper devices, one for Recording and one for Playback.
Good luck!

Similar Messages

Can you print from an iPad 2 using 3G in a home with no computer or wifi by using an iPhone 5 hot spot connection if the printer has been set up in another place with live wifi? I know this question is loaded but my dad lives in a rural area

Can you print from an iPad 2 using 3G in a home with no other computer or wifi by using an iPhone 5 hot spot connection if the printer has been set up in another place with live wifi? I know this question is loaded but my dad lives in a rural area and is wanting a printer to use occasionally. He doesn't want to deal with a computer and I keep his iPad updated for him at my home. Please shed some light on this for us PLEASE. Thanks

In that case, it should be possible. I haven't tried this directly, but I believe it should work.
You'll need to get an actual AirPrint compatible Printer.
Check here for a list of Printers you can choose from.
http://support.apple.com/kb/ht4356
Once you have the compatible printer, using the Hotspot feature from the iPhone he'll have to create the Wifi bubble form the iPhone, and connect the Printer to that Wifi network.
Then connect the iPad to that same Wifi network provided by the iPhone. When all that is done, the printer should appear in any of the Apps that can Print under the Action Arrow button.
For instance in email, pressing the action arrow should show a Print option. In there the printer should appear.
Alternatively you can simply buy a wireless router and setup the network through there even if there is no internet attached. Connect the wireless printer to the router network, and connect the iPad or iPhone to that same wifi network to print.

I have already posted this question once already but I can't find it! I'm using a Mac, using OS 10.4.11, I keep getting notifictions to upgrade to 3.6.22, however, your site says that they are NOT compatible; what doI do now?

I did ask this question before, about a week - week and a half ago. However, it had not received any answers after about 4 days. My browser crashed and I lost the page!
Anyway, I keep getting notifications indicating that I need to download update 3.6.22. This site says that it is NOT to be used with OS X 10.4.11. So, what's the real deal? can I, better yet - should I download and use 3.6.22?
Additionally, what are we supposed to do when, as the notification on this site states, that 3.6 is only temporary, when it is what taken out of usability status? ?
I'm running a G4 DP, 500 MHz, with 512 MB RAM. I'm using an Earthlink dial-up account.
DOES anybody have an answer to the above questions? Do you need any additional information?
ole_pirate

Yup, your question and Diane's answer helped me also. Tho' I had had problems before getting into the iTunes store I always managed to find a way. Today they had me blocked cold with the "Update to 10" advert no matter what I did. Other questioners are being told, incorrectly as it turns out, that they have to update their OS to accomodate iTunes 10 and upgrade to iTunes 10. I did the download which did not take up much more room on my crowded old hard drive and now I'm back in business.

I sent this question several times but have not received an email so that I can confirm.

Here is the question:
Firefox freezes or closes with any version past 3.6! Have tried various suggestions from online support. I am using Windows XP Pro with all updates, Comcast, Norton Security Suite, V5.1.0.2 updated. The only add-on that seems to work with newer versions is NoScript. I miss Colorful Tabs and Expended Copy Menu. Both those add-ons will freeze Firefox now. Sees like Firefox is going backwards instead of improving.
I have gone into the registry, removed all Mozilla and Firefox entries and reinstalled 8.1. Didn't make any difference. Sometimes 8.1 will work for 3 or 4 sessions before freezing or not reloading. I then have to do a clean reinstall. I really, really don't want to go back and start using IE.
Is this an issue for anyone else or just my computer which is about a year old? Sure would appreciate any help.
Regards,
Paleo

Hi
Well I have tried installing 8.1 without any add-ons and it will open once or twice. Then it will not open. I just reinstalled 3.6 to make this post. I have no issues with 3.6 but Mozilla has posted that this version will soon stop being supported. I can use 8.1 in safe mode with bookmarks enabled but not in regular mode!
Thanks anyway for responding to my post.
Regards,
Paleo

Dictation is no longer possible after updating to iOS8, when using Pages. I am able to dictate this question in Safari, but hey Pages will not let me dictate.

I updated to I OS 8, and after I did I discovered that capital Pages no longer accepted dictation. Instead when the keyboard was supposed to slide up and I pressed the mic button, everything disappeared below the line. There was no audio line, there was no keyboard, there was no DONE button. The only way that I could get out of the program was to hit the home button.

I am assuming you got that message when attempting to post an old thread. The old post is probably locked/archived.
FYI, posting on old threads usually yields no responses at all.
I have requested that this post be moved to the iPhone forum where you might get assistance.
Barry

I'm Not Sure this is this place to ask this question...but

Hello Evey Body,
I have A Sony Handycam Model #DCR-DVD405
this camera uses mini dvd disk...
is there any way I can get this camers to work with Imovie
My imac does not See the camera when I plug it in
I have a Hawaii vacation on several disc I want to get in to I Movie 11
Any Help Would be Greatlel Appricated...
I cant afford to by a different Camcorder
Thanks you....
please emal any Help to
<Edited by Host>
thank again
Joe

Probably the cheapest, quickest way to get those disks into a format that iMovie can edit is to 'rip' them using Handbrake . It's a free program and will allow you convert the videos on the disks to a .mp4 file. These .mp4 video clips can then be imported into iMovie.
An alternate method that will require you to spend some money is to purchase the QuickTime MPEG-2 Component from the Apple Store. Then download MPEG Streamclip which is free. With both of those pieces you can convert the whole disk into a format called Apple Intermediate Codec which iMovie '08, iMovie '09 and iMovie '11 use as their native editing format. The quality of the resulting video will be a little better going through the MPEG Streamclip route rather than converting using Handbrake. But use your best judgement, you don't have to spend any money to get the video working in iMovie, that's for sure.

Help! Where should I post this question, so I can get it answer?

I'm with the greastest Apple communuty on earth, but know ones responds to my question, except once. Is it worded incorrectly or difficult to understand. I been at for 4-5 months. Any help is well appreciated.
see below for my past adventures:
Can you help? I have pot this problem on the discussion board times 3 with no response except this time. See below.
down;oading podcast
Posted: Jun 23, 2007 8:04 AM

Reply

Email
Can Itune get too full whereas it will stop downloading podcast automatically or manually? I just exported my 2006 " bibleonradio" podcast to a folder on my harddrive. Immediately itune started downloading podast from that site. But for the last 4-5 months it would hit and miss with downloading and the last 2 weeks it quit altogether.I would go to the site and download the podcast to a selected itune folder as a mp3 for listening.
Do I need to do some type of maintenance to prevent this from occurring? The site is simple reading of bible scriptures. Could itunes get confuse with 2006 podcasts, thinking I already have the podcast, even though the release date for the new podast are mark 2007?
imacG5 , super drive Mac OS X (10.4.7)

Diane Wordsmith

Posts: 266
From: Nashville
Registered: Feb 20, 2007
Re: down;oading podcast
Posted: Jun 24, 2007 9:23 AM in response to: Austin Smith2

Reply

Email
Look at the Podcasts in your iTunes Library. Do you see a little exclamation point to the left of the listing? If so, click on that.
iBook G4 (& an iMac running OS 9) Mac OS X (10.3.9) iPod Video

Austin Smith2

Posts: 114
Registered: Oct 31, 2001
Re: down;oading podcast
Posted: Jun 25, 2007 3:35 PM in response to: Diane Wordsmith

Reply

Email
Thank you for your reply:
I have that symbol on some of my other podacst sites, but not this one because I listen to it daily, sometimes 2-3 times a day. Could the exclamation symbol for the othe sites, which goes away if I start listening to them again affect this podcast? but these site with the exclamation also hit and miss when itunes downloads, as much as 2-3 weeks once I start it back up.
imacG5 , super drive Mac OS X (10.4.7)

Diane Wordsmith

Posts: 266
From: Nashville
Registered: Feb 20, 2007
Re: down;oading podcast
Posted: Jun 25, 2007 3:49 PM in response to: Austin Smith2

Reply

Email
What's happened to me is that some Podcasts I subscribe to I might get lazy about listening to. Several of the Podcasts will pile up, and after a while iTunes will stop updating if you haven't listened to them. When I click on that little exclamation point in a circle, it will tell me that iTunes hasn't been updating that podcast because I haven't listened to it in a while. I think it asks if you want to continue (or maybe you have to click on subscribe again to get them started back).
If you are listening to this particular podcast every day, that shouldn't be a problem. And not listening to the other ones shouldn't affect this one. Sorry I can't be of more help, but I'm not sure what is causing it.
You might go to iTunes> Preferences and click on the tab for Podcasts and see what your settings are there.
Diane Wordsmith
iBook G4 (& an iMac running OS 9) Mac OS X (10.3.9) iPod Video

Austin Smith2

Posts: 114
Registered: Oct 31, 2001
Re: down;oading podcast
Posted: Jun 25, 2007 8:07 PM in response to: Diane Wordsmith

Reply

Email
Thank you again for your reply.
My settings in preference for podcast are::
check for new episodes-every hour
when new episodes are available-download all
keep-all episodes
does anyone else have this problem or any idea how to fix it?
2nd post

Converting
Posted: Jun 13, 2007 8:49 AM

Reply

Email
Trying to come up with an alternative to incomplete podcasts downloads from a website. What I'm trying to do is convert some the missing podcasts file from a website that itune don't download-reason unknown. I'm able to download a mp3 file of the podcast from the web site to my desktop, but I would like to add this to my podcast library under the same name of the podcast that I subscribed, then add to my playlist for continuous playing. Is this possible?
Thank for any Help,
Austin
3rd post

automatic podcast downloads incomplete
Posted: Jun 9, 2007 10:54 AM

Reply

Email
I was on the wrong forum. Hope someone might have an answer.
Austin Smith2
Posts: 102
Registered: Oct 31, 2001
automatic downloads incomplete
Posted: Jun 4, 2007 7:54 AM
Reply Email
Some Podcasts have many episodes and when I subscribe, I get them all at once. But with some podcasts ( http://www.bibleonradio.com/ ), only a few episodes download, and I know there are many others available either because I can see them listed by going directly to the site or because they are numbered and some are clearly missing. I have tried setting my preferences both to download the latest edition of a podcast when I update or to download ALL editions. No difference either way.
Strangely enough, if I am patience , sometimes the gaps will fill themselves in or all at once when I choose to click update. Anyone have any ideas why this might be happening? Any help would be greatly appreciated. I email the web administrator and they said they were able to go to the itune store and download all the recent episodes. Below is my email conversation.
Thanks,
Austin
imacG5 , super drive Mac OS X (10.4.7) Report this post
Austin Smith2
Posts: 102
Registered: Oct 31, 2001
Re: automatic downloads incomplete
Posted: Jun 7, 2007 4:07 PM in response to: Austin Smith2
Reply Email
Oops, I left off the dialog. Hope someone can Help.
Austin
From: Austin Smith [mailto:[email protected]]
Sent: Monday, February 19, 2007 7:16 AM
To: [email protected]
Subject: podcast
no podcast downloading after feb 17th. Can you help?
On Feb 19, 2007, at 8:45 AM, MasterMedia wrote:
Austin,
If you mean podcasting of the One Year Audio Bible, then whenever the podcasting is behind you can always go out to the website and download from there. That’s usually been updated even when the podcast has not. Sorry for the inconvenience but the podcast should be brought up to date soon.
MasterMedia
From: Austin Smith [mailto:[email protected]]
Sent: Tuesday, February 20, 2007 7:21 AM
To: MasterMedia
Subject: Re: podcast
Thank you for your quick reply.
I was able to get itunes to download all the updates except,
Feb 18 New testament,
Feb 20 New Testament,
Feb 22 Old and New Testament.
Is this a problem on my end?
You wrote, "If you mean podcasting of the One Year Audio Bible, then whenever the podcasting is behind you can always go out to the website and download from there."
If I manually download the mp3 from your website, can I put them into the postcast library?
From: [email protected]
Subject: RE: podcast
Date: February 20, 2007 9:14:44 AM CST
To: [email protected]
Austin,
I just went out to the iTunes store and tried to download those dates you had a problem with and I was able to download them without any problem. Maybe you should try again. And yes, you can manually download them from our website and store them into your podcast library. I’ve done that before and it works too.
MasterMedia
imacG5 , super drive Mac OS X (10.4.7) Report this post
StarDeb55
Posts: 6,134
From: Chandler,Az.
Registered: Jan 8, 2005
Re: automatic downloads incomplete
Posted: Jun 7, 2007 4:12 PM in response to: Austin Smith2
Reply Email
Just a suggestion, since this is a podcast issue, you might find more help in the podcast section of the Mac forum.
iMac G5 2.0 Mac OS X (10.4.9) 60GB 5G iPod, 2G iPod shuffle, iTunes 7.2 Report this post
Austin Smith2
Posts: 102
Registered: Oct 31, 2001
Re: automatic downloads incomplete
Posted: Jun 9, 2007 10:50 AM in response to: StarDeb55
Reply Email
Thanks.
imacG5 , super drive Mac OS X (10.4.7)
imacG5 , super drive Mac OS X (10.4.7)
Report this post
Austin Smith2

Posts: 114
Registered: Oct 31, 2001

Re: seeking wisdom-please help-automatic podcast downloads incomplete-
Posted: Jun 13, 2007 7:29 AM in response to: Austin Smith2

Reply

Email
Guys am I asking the wrong question? I have posted this question 3 times, but I don;t get a reply. Am I in the wrong section? Am I the only one experiencing this problem?
imacG5 , super drive Mac OS X (10.4.7)

Hi I found the answer from another post. So far everything is working find. I been trying to fix this since march,
from
Mike N. (nahyun...
Posts: 2,814
From: New York, NY
Registered: Oct 1, 2003
Re: itune application and itune folder
Posted: Jun 27, 2007 7:16 AM in response to: Austin Smith2
Solved
Reply Email
Deleting the application rarely solves anything on Macs. A better starting point is normally to delete the preference file for the application (in Users/~/Library/Preferences/com.apple.itunes.plist) or see if you have the same problem in another user account on the computer.
PM MDD(1.25GHz 1.25G-RAM 320G-HD) Mac OS X (10.4.10) 20"ACD USB2Connect MacBook (2.0 White)-2GB Report this post
Austin Smith2
Posts: 118
Registered: Oct 31, 2001
Re: itune application and itune folder
Posted: Jun 27, 2007 12:51 PM in response to: Mike N. (nahyun...
Reply Email
Mike, deleting the preferences did the trick, but I don't know why. Itunes downloaded 5 days of podcast! Hurray!! Thank you!!!!!!!!!

Help With Audition CS6: Adding windows sound to accompany USB Mic

Hey Guys,
I have a Blue Yeti USB microphone that I wil be using to create a podcast with a friend over skype. When I am setting up audition cs6 I cannot seem to get the USB mic AND skype audio to be recording at the same time. Is this because I do not have a dedicated sound card, or is there something else I am missing?
On a side note, when I set the multitrack to the stereo mix, it says that there are two different types of audio signals and wont record.
Thanks for your help!

dancalgary wrote:
I have been using Audition on this computer for the past few months now. The computer itself is an Alienware laptop, with the most optimal specifications we could get. So right away ram, disk space, disk writing speed, processor, and sound hardware should not be an issue at all.
I take it that you are using the internal sound hardware, then. If this is the case, then you could easily have problems with the sound device, because there isn't a single laptop made that has a decent sound system in it. For a start, none of them support ASIO - which is inherently what Audition uses to produce its output. What happens to get around this is that Audition has to provide an internal extra driver to drive the default sound driver, and this is at best a compromise. If you want decent sound from a laptop, then you need an external sound device with an ASIO driver.
As for W8, well I'm with Bob on this one. It's new, slightly weird, and as with all M$ operating systems, all bets are off until at least the first service pack is issued. If you have anti-virus software that's any more aggressive than AVG, then turn it off. The other common gotcha is wifi - some systems manage to give a massively high priority to wifi polling, and sometimes just turning it off completely is the only way to get any sort of performance at all. I must say though that lately this doesn't seem to have been anything like as much of an issue as it used to be back in the bad old days...
But, if you have badly stuttering playback, then it sounds as though your HD streaming isn't working as it should, and that something else is getting priority access to the drive - which is sometimes where virus scans can catch you out. You really do need to stop pretty much everything unnecessary running, one way or another. And get an external sound device that uses ASIO - this effectively bypasses most of the OS, and gives Audition pretty direct access to the device.

Anyone know how to remove Overdrive books from my iphone that have been transferred from my computer? They do not show up on itunes. I see a lot of answers to this question but they all are based on being able to see the books in iTunes.

How do I remove Overdrive books from the library that were downloaded onto my computer then transferred to my iphone? The problem is that they do not show up in iTunes.
I see this question asked a lot when I google, but they always give answers that assumes you can find the books in iTunes either under the books tab, or the audio books tab or in the music. They do not show up anywhere for me. They do not remove from the app like the ones I downloaded directly onto my iphone.the related archived article does not answer it either. I even asked a guy working at an apple store and he could not help either. Anybody...?
Thanks!

there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

I noticed this question has been asked a lot, but I still do not understand. How do I get my ALL of my iTunes music onto iCloud. I have already subscribed to match and increased my icloud storage. Only some of my music is in the cloud, not on iphone

I have noticed that this question has been asked a lot, but I am still not understanding. How do I move ALL of my music on iTunes into iCloud? I have subscribed to match and increased my iCloud storage. Only part of my music is in the Cloud and not on my iPhone.

Hello, Crafter Lady.
Thank you for visiting Apple Support Communities.
You may find this article helpful when troubleshooting issues with iTunes Match.
iTunes Store: Troubleshooting iTunes Match
http://support.apple.com/kb/ts4054
Cheers,
Jason H.

USB Mic not working in Premiere Pro CS6 for Mac

So I've been editing in Premiere Pro CS6 on a mac for 6 months now. I have to do a temp VO for a project and I thought I'd try the Narration feature in the mixer. For some reason my USB mic doesn't show up in the Audio Hardware so I can't pick it. The same mic shows up in the Mac Audio Settings and even shows up in Audition. I've been having to use Audition but was curious to see if anyone out there has gotten a USB mic to work in Premiere Pro on a Mac. Would be a really cool feature if it worked.
Greg Jones
D7,Inc.

Some USB mics work fine, but many do not. It can depend on the exact mic, or might require a different ASIO driver (maybe something like ASIO4All?), or different ASIO setting, to work.
Good luck,
Hunt

Snowball USB Mic not recording

Hey Guys,
I have a Mac 0S X 10.6.8.
I just boght a Blue Snowball mic-
I'm using Adobe Premiere Pro CS6 and I can't record with my usb Mic: When Im doing overvoice, it is recording with my internal Mic-
I already:
-check the cable
-Connect diconet my computer
-Check the USB port
-create a new aggregate device
-Check out the input and output
-In CS6,Change the audioharware to the new device(256-521) input-output
- recording in mono....
and still I can't figure this thing out-
Can somebody help?
thanks guys appreciated

Hi D.A.,
Sorry you couldn't find the doc easily, but happy you are set up now.
I did place it in our FAQ here: http://forums.adobe.com/thread/1417831?tstart=0
I will let the tech writer know about the need for having this info in the documentation. Good idea, thanks.
In the mean time, you can file a feature request to make USB mic setup a lot easier here: http://adobe.ly/feature_request
Thanks,
Kevin

Not getting any straight answers for this question!!!!!

Hi All,
This question i've posted before, but i didn't get correct answer. I'm posting it again!!!!!
I'm very confused about the flow of process.
right now i'm working on webmethods. I did worked on lots of message types like 850, 810,856,832,940,997 in X12 and also EDIFACT.......for that past 2 1/2 years.
This question is completely related to SEEBURGER ADAPTER NOT ANY CONVERSION AGENT:
1.
when an EDI message comes into XI it will be converted into EDI-XML format bye seeburger adapter. where we get the prototype of EDI message? Do we have a package or namespace in repository from seeburger which gives all EDI prototypes? or we import as an XSD doc from our local system generated by 3rd party tools?
2.
Do we write a mapping program(EDI-XML 2 IDOC-XML) with graphical tool or do we have a tool provided by seeburger to write mapping program? I heard that seeburger provides mapping programs(not those modules which converts standard EDI to XML EDI) which will convert EDI XML 2 IDOC-XML. is this is true?
3.
how do we process EDI file sent by customer? is it ISA level or ST level? because there may be many situations where one ISA has multiple ST's.
Please explain me if possible with one scenario......i read all the links provided about this question so i need a practical example.........
Thanks in advance.

Hi,
Go thru this might help you
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards
Agasthuri Doss

Cannot switch back to built-in output after connecting USB mic

I cannot get playback unless I plug back in my USB mic (Blue Yeti) on Mac OS X.
I get this notice:
"The selected audio device has no output channels."
I select Default Output to be "built in output" then go to Audio Channel Mapping tab and my output device is saying Yeti stereo microphone (not working).
It is obviously not working because it isn't plugged in. My question is why isnt it using my built in output when the mic is unplugged. Even through the Sound tab in system preferences my output is set to "built in"
I get playback through the mic when it's plugged in, but I need to be able to get playback through my built in output when the mic is not plugged in. Any ideas on this greatly appreciated.

Start out with these ! Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support How to Reset NVRAM on your Mac - Apple Support if issue still persists look inside the audio jack see if the light is on.

K8N Neo4 (MS-7125) USB, Mic, S/P Out, and LAN ports all non-functional

I'm hoping someone can give me a hand with this. I'm not a novice when it comes to motherboards but this particular board is making me feel like it.
Ok, I've got a K8N-Neo4 MS-7125 model. Athlon64 3700. I have all the current drivers and ran the liveupdate to make sure.
The LAN port will light up, but the Device manager will not recognize it, nor will the LAN utility.
The board has 4 USB ports. The top two are non-functional, the bottom two work.
The S\P OUT port has never worked, nor do I know how to engage it or find it on the device manager
The microphone....this one is fun. Its like the microphone is stuck in a feedback loop. Whatever comes through my speakers, is heard on the other end by other users. I am not heard at all, although I can hear myself through my OWN speakers. Even with the mic unplugged, people still can hear my speakers. Imagine having your speakers plugged into the mic jack. The only way to kill the feedback is to actually go into the sound manager and mute the whole mic system.
I can live without the LAN and USB ports, but it would be a HUGE help if someone can help me with the mic and S\P ports!!
Thanks!!!

Ok, I'll do my best to remember everything
Athlon64 3700 939socket
XP Pro Service pack 2
Rosewill case 400watts
SonyDVDRW Drive (dual layer)
Samsung DVD drive
GEForce 7300 256DDR (PCI Express)
120GB Seagate 7200 RPM Harddrive (IDE) Partioned two drives
1x512DDR ram PC3200 400mhz
As for the flavor of the NEO4 the only other numbers I know of, is on the board it says N1996 right below the processor. Is that what you need? Its a PCB V.3 board nvidia Nforce4.
Speakers are standard cyber acoustic
Logitech Mic/Headset combo
This particular case allows for hookups for headphones and mic in the front. The case has jumpers in the back that allow you to gain access from the front (but you probably already know that). I've always used the front MIC/Headset jack, and I have a splitter in the back for the headphones and that jumper. In trying to resolve the issue, I tried every jack with the microphone (even the ones that I know are labeled as speakers). I do get my own voice through MY speakers on the front jack AND the mobo jack.
Hopefully I got you enough info!
Thanks in advance!!!

USB Mic & CS6... (heard this question a lot, but I'm dumb.)

Similar Messages

Maybe you are looking for