Use desformat=spreadsheet output Excel,print percent setting not 100%,why?

In version 10.1.2
use desformat=spreadsheet output excel,
Open the excel file,and print view,the print percent lower 100%,
how to set report file,make output excel print view 100%?
thanks for any help!
lind

Be sure you put the heading the same size as your column because otherwise it will not insert the diffent columns in seperate columns in excell

Similar Messages

Use desformat=spreadsheet output excel,number fields can not right align

overview and PDF right align,it's ok.but excel all field left align.
why?

Be sure you put the heading the same size as your column because otherwise it will not insert the diffent columns in seperate columns in excell

Character value changed to date when using desformat = SPREADSHEET

I'm running reports on application server 10.1.2.0.2, and have a problem with formatting when printing to excel (desformat = SPREADSHEET). I have a character-field with the value 12.1, and when I print this, excel transforms it to 12.jan. Excel thinks this is a date-column. I have tried to add chr(39) on each side of the value, to force excel to print this value as character, but then it is displayed like this: '12.1'
Does anyone have a similar problem? How can I force excel to display this as a character field with the value 12.1?
Marit.

Is there any suggestion for excel not to trim white spaces from string.
ex "Day 1"
"nbsp;nbsp; Data1"
"nbsp;nbsp; Data2"
while using spreadsheet formatting all the leading spaces are trimmed off.
thanks
senthil;

Using servelet to output excel

Hi
im trying to use servelt to output the existing excel sheet. iv used
response.setContentType("application/vnd.ms-excel");
response.setHeader("Content-disposition","attachment;filename="+filepath);
The problem is i wonder how i can export the data from the existing file.
thanx
mmantee

Jakarta POI make that MicroSoft format file.
http://jakarta.apache.org/poi/
above url is Jakarta POI site.
Good luck~!! ^^

Printing pre sets not saving

I save photo printing pre sets according to the kind of paper I'm printing on. I use an Epson 2200. I change the print settings and color management and do "save as" Enhanced Matte or Watercolor. When I go to print again Enhanced Matte and Watercolor are still there but the print settings and the color managment settings aren't saved.
iMac G5 Mac OS X (10.4.3)
iMac G5 Mac OS X (10.4.3)

My first time posting something, so I do need to say that I find this forum an invaluable resource, and has always been very helpful.
Thank you so much for responding to my dilemma. The shortcut sets do show up in the Preferences and don't disappear once the shortcut key stops working. What is odd is that my Shortcut Set is still there, but my shortcut commands are gone, so I probably should have stated "shortcut command", instead of "set".
Also, there is somewhat of a mystery going on here, for me, anyhow. I thought I would try one more time before updating to 7.0.4, and for some unknown reason everything is working as it should. I didn't restart or shut down before I left for the evening. So I'm unsure of what was going on.
But thanks again for your responses.

Fax output logo printing text is not

Hello All,
I am sending a document to fax using communication type as 2. The document is going to the fax machine and is printing only the logo but the text is being printed as garbage characters. In the spool I can see that the document is shown correclty. The interface is topcall.
Can anyone suggest why the text is not being printed while the logo is.
Thanks in advance,
Ranjan

Hi Ranjan,
Is the text in your document in English or some other Asian langauge.If so you need to have some settings done at Windows as well SAP side.
Thanks
Sudharshan

Desformat=spreadsheet blank rows and columns

Hello,
With Oracle Reports 10g R2, I'm trying to generate EXCEL report output using desformat=spreadsheet
The excel report output is being generated with one blank column between each data column and 2 blank rows between each data row.
Any clue to get around the problem ?
Thanks
Sridhar

I think you should try this one:
http://www.oracle.com/technology/products/reports/htdocs/getstart/demonstrations/excel/viewlet.html
No more blank rows or blank columns

Spreadsheet output from reports posting to multiple cells instead of one

Hi all, using Report Builder 10.1.2.2.0
ORACLE Server Release 10.1.0.5.0.
I have a report that creates its output as an excel file using desformat=spreadsheet. The problem I am having is with fields that contain a large amount of text with formatting characters in them. In particular, carriage returns. When this data is created in excel, it treats the carriage return as a new cell, so instead of putting all the data for that column into one cell, it creates a number of cells and merges them all together.
Is there anyway to get around this? I know excel can support line breaks within a cell, is it a limitation of oracle reports to be unable to duplicate this output?

For what it's worth, that's the way I read that line in the User Guide as well. What it actually appears to mean, though is 'Rules applied to multiple cells apply independently to each of the cells."
Here's a workaround for your three adjacent columns. Long, but fairly simple steps.
Add a second table to the sheet (Table 2).
Resize the second table to one column wide and as many rows as you want to apply the conditional format to.
Set the width of the column to the same width as the three columns you want to highlight, and the row height(s) to match the rows.
Format to table to have NO Header or Footer row or column.
Use the Wrap Inspector to uncheck "Object causes wrap"
In the first top cell of Table 2, enter an = sign, then Click on Table 1 in the sidebar, Click on the first cell that will hold YES or NO.
Fill the formula down the rest of Table 2.
With all cells in Table 2 selected, use the Cell Format inspector to set the 'text contains yes' rule and the conditional fill colour for these cells.
Test the conditional formating by introducing values into Table 1.
Click on Table 1 in the sidebar, then use the Table inspector to set Cell Fill to 'none'.
Click on Table 2 in the sidebar, then drag that table onto table 1 aligning it to cover the cells in which the conditional formating is to appear.
When positioned (and still selected), go to the Arrange menu and Send Backward to move Table 2 behind the (transparent) cells in Table 1.
With Table 2 still selected, click on the Cell Borders color well and set the Opacity of the borders to 0%.
Click the Text inspector and set the Text colour Opacity for Table 2 to 0%.
Regards,
Barry

"This iPod cannot be used because the Apple Mobile Device service is not s"

This iPod cannot be used because the Apple Mobile Device service is not started.
why do i keep getting this whenever i connect my iPod touch (2G) started happening today, i think it has something to do with "Bonjour" i blocked it i believe and when i go to control panel>Administrative Tools>Services and try to start it up it says "Windows could not start Bonjour Service on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to the service-specific error code -1.". Please can anyone help?

Try to enable it under "RUN" then type MSCONFIG then on the SERVICES tab look for the Bonjour service and enable it

When get on itunes and i plug my phone it is says (this Iphone cannot be used beacuse the apple moblie Device service is not started.) why is that cause it was just working and syncing find yesterday please help

can someone help me figure this out my phone wont sync cause it says -This phone cannot be used because the apple moblie device service is not started. why ? it worked fine yesterday

That is because your apple mobile device service is not started.
The apple mobile device is the thing that allows your phone to communicate with your computer. First thing to try is restarting your computer then plugging your phone in. Check with activity monitor / task manager to see if it is running.

DESFORMAT=SpreadSheet mutates output

DESFORMAT=SpreadSheet
PRODUCED OUTPUT WITH VERY BAD FORMATING
(1)DATA IN ROWS ARE NOT ALIGNED
Data is in cell c12 and the adjacent column has data in cell d13
(2)COLUMN HEADINGS SKEWED
Data is in column C and the column heading is in column G
(3)LOTS OF BLANK ROWS
The first 10 or 20 are empty rows
(4)LOTS OF BLANK COLUMNS
First data item is in b25 the next one is in g25, etc
Any suggestions?

I also tried DESFORMAT=XML
This formats within each cell properly
When ouput appears in browser windos I did FILE=>SAVE AS and put .xls as fine name extension to get EXCEL ouput
Just the column headings are not EXACTLY right
It may be possible to modify XML tag in Data Model Group to have proper column headings....
For report level Place Holder that you do not wish to appear in report
set XML Output = NO
Let me know

Displaying image in report DESFORMAT ='SPREADSHEET' (Excel)

Hi,
I want to display a logo in Excel report. I have created one formula column with function
function CF_4Formula return Char is
begin
return('/report/xls/gelogo_new.bmp');
end;
I have placed the image in the above path. When I execute the report image is not appearing in it.
What could be the issue?
Below is the code in After Parameter form Trigger.
:DESTYPE = 'FILE'
:DESNAME := '/report/stg/'||:p_report_name||'_'||:p_calendar_month||:p_calendar_year||'.xls';
:DESFORMAT: 'SPREADSHEET'
Also please tell me how to set/see the default directory of REPORTS_PATH in Unix server.
Can anyone please help me out with this issue.
Thanks,
Kishore.

Thanks for the response. Sadly yes, the path is correct. I've
tried both the relative path and the full path (e.g.
../images/theimage.jpg and
http://mysite.com/images/theimage.jpg)
. Putting either address into a browser will return the correct
image if I'm in the right location.
So, I can get this expression: IIf(query.image NEQ "",
DE("../images/smProds/" & query.image), DE("None")) to display
the correct path, but what I really need is the image located at
that spot to display in the report. What is happening is that
report builder is returning the string, but not the image. When I
looked at the tutorial it implied that the image would be displayed
rather than the string.
Is there something in report builder that determines whether
the actual image is displayed? A property setting that I'm missing?
Or maybe the expression iteself is wrong i.e. it is doing exactly
what it should (display the string) and a different expression
format is required to get the image iteself. For example, flagging
some text as a hyperlink to the image? Not sure how you would pass
the image name value in that case.
Appreciate your suggestions.

I used to be able to print a mosaic cover from the print tab but after downloading the most recent (10.2.2) version I cannot. Though it seems to be showing the mosaic cover in print set-up it prints a play list only. Can someone respond with help

I used to be able to print a mosaic CD cover from the print tab after purchasing music but after downloading the most recent (10.2.2) version I cannot. Though it seems to be showing the mosaic cover in the print set-up it prints a play list only. Can someone respond with help in fixing this? I've tried several times with different down-loaded music but no success.

The recent releases of iTunes have brought a bunch of bugs into the printing of CD covers.
Some people report that directing the iTunes print output to PDF, and then printing to paper from the PDF, solved their problem. Others have reported that it did not help. Worth a try.

How can I use PowerPivot tables like Excel tables -- printing, etc.?

I can't seem to find any information on this anywhere, and even more surprisingly, no one else seems to have even asked this question...
How can I use tables I create in the Excel PowerPivot window in the same ways I use tables that are in ordinary Excel worksheets, to accomplish tasks such as printing? I am able to use the powerful capabilities of PowerPivot to produce tables with precisely
the information I need for reports -- connecting data from multiple tables/sources, filtering, etc. -- but then there doesn't seem to be any way to actually print what I'm seeing, nor can I seem to access cells in these PowerPivot tables from Excel worksheets.
If a PowerPivot table is conceptually an Excel table with additional power in terms of pulling in data and relating it, it would seem appropriate that all the power of Excel could be brought to bear on these PowerPivot tables, but on the contrary, the available
operations are limited. if, instead, a PowerPivot table is more correctly viewed as a data source that Excel worksheets can connect to, that would be fine, and indeed, one
can use a PowerPivot table as a data source -- except it can't be brought into an Excel worksheet as an ordinary Excel table, unlike most other data sources.
I hope I'm missing something really obvious, and that someone can point out what it is. Thanks.

Kirchh,
When PowerPivot was first designed, the decision was to integrate closely to Sharepoint to allow for team sharing. We are constantly evaluating customer feedback to add more features, and this has been one of the feedbacks we have received. We will consider
supporting this in the future but with no gurantee.
Chu
-- This posting is provided "AS IS" with no warranties, and confers no rights
I'm not questioning why PowerPivot is closely integrated with SharePoint. I'm asking why connecting to the PowerPivot model from within Excel was intentionally blocked by Microsoft, when all the functionality to do so appears to be present.
Is creating an OLE DB connection in Excel to PowerPivot as $Embedded$ supported?
No support. It was originally designed for SharePoint. This changed with Power Pivot for Excel 2013 (it's packaged with it). Originally the scope (in 2010 through 2012) was that it was for SharePoint users. So it became more obvious through that to market it
toward all Excel users. Thus the recent changes.
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

How to set HP OfficeJet 4500 used as a network printer to print in black not color as a default.

I have my HP officejet printer set as a network printer but it prints color when I had initially set it for B&W as my default during set-up
How do I set my HP OfficeJet 4500 used as a network printer to print in black not color as the default.
Thanks,
Bob

OK, go to Start > Control Panel > Printers. Right click the printer in question and choose Printing Preferences. Set it the way you want, then click OK.
That should set the defaults for all programs using the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Use desformat=spreadsheet output Excel,print percent setting not 100%,why?

Similar Messages

Maybe you are looking for