Use of Sender & Receiver Function in Constant Functions

Hi All,
What is the use of "Sender" and "receiver" function in "Constant Functions" in graphical mapping. In which scenarios it will be used.
Thanks & Regards
Venkat Anil

No its does not create "Test_Sender_System" & "Test_Receiver_System" Nor you have to create these business sytems.
At runtime based on your scenario/ID configuartion it will give you the actual sender and receiver systems in the mapping.
But if you are testing your mapping directly in Integration repository->Message Mapping->Test Tab at design time then it will give "Test_Sender_System" & "Test_Receiver_System" as a ouput (at design time it does not have actual sender/reciver information).
For e.g. if you have scenario with BS_SENDER and BS_RECEIVER as your sender and receiver business system then
1. If you run your interface end-to-end the the output at runtime will be BS_SENDER and BS_RECEIVER for "Sender" and "Receiver" functions respectively.
2. If you directly test your message mapping in IR->MM->Test Tab output at design time will be "Test_Sender_System" & "Test_Receiver_System" for "Sender" and "Receiver" functions respectively. (at design time it does not have actual sender/reciver information).

Similar Messages

Using the send by Email for Review function

We are using Adobe Acrobat 8 and would like to use the send by Email for Review function. We would like to modify the text for the invitation message but don't want to have to modify it every time we use the function. Does anybody know any way that we can modify the message so that it would be the same message every time it is used?

Hi Christine,
I know it's not the answer you want, but signatures have to be added in a serial manner. Every time you sign the PDF file you are signing everything that came before the signature was created, and this includes the previous signatures. There is no method to combine signatures from multiple files into one file. You would end up creating a signature over data that wasn't there when the signature was originally created, and in the security world that's a no-no.
Steve

What classes should I use to send/receive bytes inmediately?

What classes should I use to send/receive bytes inmediately? I mean, without using any buffers or whatever (I will implement this on my app), just the faster method.
Is InputStream/OutputStream the lowest level choice?
Thanks!

Hi!
Thank you very much for your help, I appreciate it a lot.
While I test my server, I execute ping www.myclienthost.com -t (my client games are in other office, in the same building, but different ISP) and I don't see anything strange, so I guess network is working perfectly. However, if I use wireshark (sniffer) and I see that my system fails (server does not send acks so client disconnects) is because my acks messages are not sended for 6 o 7 seconds (it should send them every 2 or 3). It seems thread is blocked. and after 6 or 7 seconds one message with 2 or 3 acks together is sent. So, I see that the thread handler blocked for a few seconds and this is doing my server is failing. Why client handler thread on my server is blocked? One question: every 2 or 3 seconds I have a thread that uses sleep that iterates thru client handlers and takes OutputStream and send one ack message for every client handler. My question is, in client handler class I have a method called SendInfo(String whatever) which encrypts and sends through OutputStream, should I protectd this method from accesing from two threads??? as acks thread and client thread can access at the same time. Could this be the problem??
EDIT: In my previous post I forgot to say what I found out with wireshark. Here I explain it. Sorry.
By the way, how can I debug threads?? I would like to know if my client thread is blocked in that critical moment.
Thanks a lot for your ideas and sorry for my English.
Edited by: Ricardo_Ruiz_Lopez on Jan 22, 2009 7:38 AM

JDBC Adapter can be used for sender / receiver for MS Access ?

Hi Experts
   I want to communicate with MS Access by using JDBC sender and receiver
   adapter ? How to set up ?
   Links/screen shots/etc..........
Adv thanx
regards
rakesh

Hi Rakesh ,
>>>> Why the driver is : jdbc:odbc:Driver={Microsoft Access Driver
(*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb ?
if your test data base file is TestDB.mdb you need to give the absolute path of the file to get access to JDBC adapter set so you can replace the file path with the corresponding path on your test system .
Please place the data base file in a directory where the XI system has share access.
Regards,
Nanda

Sending & Receiving SO electronically

Hello,
I have one scenario.I will be receiving the customer PO electronically i.e through IDOC. I will make sales order & send the Order confirmation to my customer electronically i.e through IDOC.
Now my question is how to configure inbound & outbound IDOC in the system. As far I know this involves more from technical side but I want to know what are the programs to be used for sending & receiving IDOCs. what is the logic by which one can send & receive IDOCs.Please provide me in detail.
Regards,
Naveed Ansari.

Hi there,
To send / receive the IDOCs to / from SAP, you will need to have the partnwer profiles defined in WE20. You will define the sending / receiving systems as partners in WE20.
Then you will define the IDOC message types in WE30. There you can also specify what segmenst you need & what data needs to go in the segments.
Then you will assign the message type to the inbound & outbound paramaters in WE20. Every message type will have a relevant IDOC posting / processing progs. You will have to asign them to the message types.
For eg: When a PO is created, SAP will receive the IDOC from an external system. The IDOC posting prog will be called which will post the information into the SAP application doc. Here PO or SO.
When the sales order is created, the IDOC O/p will be created. The IDOC processing progs will send the IDOC into the partner recciver port. It will call an RFC which will post an application doc into the external system.
All the posting progs are developed by the ABAP. So contact your ABAPer & explain the functionality. But partner profiles are defined by func consultants.
Regards,
Sivanand

Pre-Query + Webtemplate + Sender/Receiver assignment

Hi,
I have a problem with the Variables screen of my query. The situation is as follows:
- I have Query (let's call it Q1) with a "Replacement Path" variable (V1).
- The pre-query associated to V1 has 3 variables (va1, va2, va3)
- I also have a Web template (W1) that is used to display query Q1.
- In W1, the checkbox for attribute "Force Variables Screen Display" is not checked. That is, I want that the variables screen doesn't come up by default. According to the attribute description, if the checkbox is not checked, "...Display only appears if Mandatory variables are not Filled...", and I don't have any mandatory variables.
- I use a Sender/Receiver assignment (Tr. RSBBS) to jump from another query (Q2) into W1, assigning values for the 3 variables va1, va2, and va3.
- As a result of the "jump" from Q2 to W1, I get the Variables Screen of Q1 displayed (with the right values for variables va1, va2 and va3), and only after clicking on "Execute" I get to see the data...
Now, what I need is to display the data first, and not the variables screen... Any Ideas?
I hope the description of the scenario is clear... If not, please let me know...
Kind regards,
Damian.

I am facing exactly the same problem except that instead of a RRI, I am using parameterized web template URLs. Damian, If you have solved this problem, can you post how? If not, can someone who sees the problem help ?
To restate the problem,I have a web template with a query which has a variable which is populated by a replacement path query which has another variable whose value the user enters. I build up the parameterized URL.
http://dw1-sap.app.*******.com:1041/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&CMD=LDOC&TEMPLATE_ID=PRDPROF&VARIABLE_SCREEN=&VAR_NAME_1=PRDTXT&VAR_OPERATOR_1=CP&VAR_SIGN_1=I&VAR_VALUE_LOW_EXT_1=FEM
The template PRDPROF is based on a query and has a variable PRDID which is a replacement path which is filled by a query whose variable is PRDTXT and is filled in the above URL. PRDTXT is a selection option variable whose entry is optional and is checked ready for input. 'Change during query navigation' is unchecked.
For some reason, the variable values are passed onto the parameterized URL and will fill the variable screen but the screen waits for the user to push the execute button.
Can anybody see what the problem is ? Any input is apperciated.
Thanks.
> Hi,
> I have a problem with the Variables screen of my
> query. The situation is as follows:
>
> - I have Query (let's call it Q1) with a "Replacement
> Path" variable (V1).
>
> - The pre-query associated to V1 has 3 variables
> (va1, va2, va3)
>
> - I also have a Web template (W1) that is used to
> display query Q1.
>
> - In W1, the checkbox for attribute "Force Variables
> Screen Display" is not checked. That is, I want that
> the variables screen doesn't come up by default.
> According to the attribute description, if the
> checkbox is not checked, "...Display only appears if
> Mandatory variables are not Filled...", and I don't
> have any mandatory variables.
>
> - I use a Sender/Receiver assignment (Tr. RSBBS) to
> jump from another query (Q2) into W1, assigning
> values for the 3 variables va1, va2, and va3.
>
> - As a result of the "jump" from Q2 to W1, I get the
> Variables Screen of Q1 displayed (with the right
> values for variables va1, va2 and va3), and only
> after clicking on "Execute" I get to see the data...
>
> Now, what I need is to display the data first, and
> not the variables screen... Any Ideas?
>
> I hope the description of the scenario is clear... If
> not, please let me know...
>
> Kind regards,
>
>
> Damian.

Cant find RTCW send receive.vi

I have a VI that uses RTCW send receive.vi as one of its several vi's. Since it cannot find it, it remains broken and hence I cannot buiild an exe later.
Where can I get this VI? and how do I make the parent VI find this vi?
I am very new at LV hence askign such fundamental Q's.
BK

Are you using LabVIEW 8.2? I think the RT Communication Wizard switched from being located in the [LabVIEW]\project folder in LabVIEW 7.x to the [LabVIEW]\resource\Framework\Providers\lvrealtime\RTCommWizard folder in LabVIEW 8.x. Also, I wouldn't be surprised if some of the VIs were renamed or removed. Perhaps the old version of your code was written in 7.x, and by moving to 8.x, the VIs the code linked to are no longer there?
As a general rule, your application should only use VIs in vi.lib or in your own code repository. Using internal LabVIEW VIs (like those found in the project or resource folders) can cause problems, since there's no guarantee those VIs will remain the same (and have the same name) with LabVIEW upgrades.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

What is the function module used to send an email

hi
what is the function module used to send an email

Hello,
Try this, It will help you. Sure.
Regards,
Rakesh.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS:
con_tab TYPE c VALUE cl_abap_char_utilities=>horizontal_tab,
con_cret TYPE c VALUE cl_abap_char_utilities=>cr_lf.
TYPES: BEGIN OF typ_item,
 asno(10) TYPE c,
 matnr TYPE mseg-matnr,
 maktx TYPE makt-maktx,
 menge TYPE mseg-menge,
 meins TYPE mseg-meins,
 END OF typ_item.
DATA: wrk_menge(17) TYPE c.
DATA: sum_srno TYPE i VALUE 0.
DATA: wrk_srno TYPE n.
*Internal tables
DATA: it_std_objhdr TYPE TABLE OF solisti1.
DATA: it_std_objcnt TYPE TABLE OF solisti1.
DATA: it_std_rcvlst TYPE TABLE OF somlreci1.
DATA: it_std_objtxt TYPE TABLE OF solisti1..
DATA: it_std_objpack TYPE TABLE OF sopcklsti1 .
DATA: it_std_cntbin TYPE TABLE OF solisti1.
DATA: it_std_items TYPE TABLE OF typ_item.
DATA: is_items LIKE LINE OF it_std_items.
* DATA: it_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE.
* DATA: wa_attachment TYPE solisti1.
* Internal structures
DATA: is_docdata LIKE sodocchgi1.
DATA: is_objhdr LIKE LINE OF it_std_objhdr.
DATA: is_objcnt LIKE LINE OF it_std_objcnt.
DATA: is_rcvlst LIKE LINE OF it_std_rcvlst.
DATA: is_objtxt LIKE LINE OF it_std_objtxt.
DATA: is_objpack LIKE LINE OF it_std_objpack.
DATA: is_cntbin LIKE LINE OF it_std_cntbin.
*Work variables
DATA: wrk_lines TYPE i.
is_docdata-obj_descr = 'Movement of parts to processor'.
*Cover letter of the mail
is_objtxt = 'Dear Sir,'.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = ' '.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = text-001.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = text-002.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = text-003.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = ' '.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = 'Thanks n Regards,'.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = ' '.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = 'abc MOTORS'.
APPEND is_objtxt TO it_std_objtxt.
* Write Packing List (Main)
DESCRIBE TABLE it_std_objtxt LINES wrk_lines.
READ TABLE it_std_objtxt INTO is_objtxt INDEX wrk_lines.
is_docdata-doc_size = ( wrk_lines - 1 ) * 255 + STRLEN( is_objtxt ).
CLEAR is_objpack-transf_bin.
is_objpack-head_start = 1.
is_objpack-head_num = 0.
is_objpack-body_start = 1.
is_objpack-body_num = wrk_lines.
is_objpack-doc_type = 'RAW'.
APPEND is_objpack TO it_std_objpack.
BREAK-POINT.
*loop for selecting the data into contents bin//// Excel.
CONCATENATE 'SRNO' 'ASN no:' 'PARTNO' 'PART DESCRIPTION'
 'QUANTITY' 'UNIT' INTO is_cntbin
SEPARATED BY con_tab.
CONCATENATE con_cret is_cntbin INTO is_cntbin.
APPEND is_cntbin TO it_std_cntbin.
LOOP AT it_std_items INTO is_items.
 sum_srno = sum_srno + 1.
 wrk_menge = is_items-menge.
 wrk_srno = sum_srno.
 CONCATENATE wrk_srno is_items-asno is_items-matnr is_items-maktx
 wrk_menge is_items-meins
 INTO is_cntbin SEPARATED BY con_tab.
 CONCATENATE con_cret is_cntbin INTO is_cntbin.
 APPEND is_cntbin TO it_std_cntbin.
ENDLOOP.
*To be implemented later
* CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
* INTO it_attach SEPARATED BY con_tab.
* CONCATENATE con_cret it_attach INTO it_attach.
* APPEND it_attach.
* LOOP AT it_ekpo INTO wa_charekpo.
* CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
* wa_charekpo-aedat wa_charekpo-matnr
* INTO it_attach SEPARATED BY con_tab.
* CONCATENATE con_cret it_attach INTO it_attach.
* APPEND it_attach.
* ENDLOOP.
*ENDFORM. " BUILD_XLS_DATA_TABLE
DESCRIBE TABLE it_std_cntbin LINES wrk_lines.
READ TABLE it_std_cntbin INTO is_cntbin INDEX wrk_lines.
is_objpack-doc_size = ( wrk_lines - 1 ) * 255 +
 STRLEN( is_cntbin ).
is_objpack-transf_bin = 'X'.
is_objpack-head_start = 1.
is_objpack-head_num = 0.
is_objpack-body_start = 1.
is_objpack-body_num = wrk_lines.
is_objpack-doc_type = 'XLS'.
is_objpack-obj_name = 'Document File'.
is_objpack-obj_descr = 'Document File'.
APPEND is_objpack TO it_std_objpack.
*Start of testing code
IF sy-uname = 'DEVELOPER'.
 is_rcvlst-receiver = sy-uname.
 is_rcvlst-rec_type = 'B'.
 is_rcvlst-express = 'X'.
 APPEND is_rcvlst TO it_std_rcvlst.
 CLEAR is_rcvlst.
ENDIF.
*End of testing code
*Creating the recepient list
is_rcvlst-receiver = '[email protected]'.
is_rcvlst-rec_type = 'U'.
is_rcvlst-express = 'X'.
is_rcvlst-com_type = 'INT'.
APPEND is_rcvlst TO it_std_rcvlst.
is_rcvlst-receiver = '[email protected]'.
is_rcvlst-copy = 'X'.
is_rcvlst-rec_type = 'U'.
is_rcvlst-express = 'X'.
is_rcvlst-com_type = 'INT'.
APPEND is_rcvlst TO it_std_rcvlst.
BREAK-POINT.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 document_data = is_docdata
 put_in_outbox = 'X'
 commit_work = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
 TABLES
 packing_list = it_std_objpack
* OBJECT_HEADER =
 contents_bin = it_std_cntbin
 contents_txt = it_std_objtxt
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
 receivers = it_std_rcvlst
* EXCEPTIONS
* TOO_MANY_RECEIVERS = 1
* DOCUMENT_NOT_SENT = 2
* DOCUMENT_TYPE_NOT_EXIST = 3
* OPERATION_NO_AUTHORIZATION = 4
* PARAMETER_ERROR = 5
* X_ERROR = 6
* ENQUEUE_ERROR = 7
* OTHERS = 8
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK.

Sms send receive and other basic phone functions

How do send/receive SMS's on iPhone. Is there a "how-to" manual for the BASIC operation functions for day to day telephone use? Don't need pictures, music or computer ********, jst basic mobile phone use at this stage.

See Here
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Outlook 2013 - "schedule an automatic send/receive" NOT functioning

Here is yet another bug in Outlook 2013 which remains at large.
Yes, "schedule an automatic send/receive" is not functioning, except in the case of Hotmail/Outlook.com
The only time new emails are getting download are when the Send/Receive button is clicked, or when the inbox of the account is selected.
Other than that Email is not getting checked/downloaded every thirty minutes as it is setup to do.
Oh, and please none of those generic "create a new profile" answers.
Thank you.

Hi,
We have unmarked that thread. Sorry for any inconvenience caused.
We have tried several steps to narrow down the issue in the previous thread. The issue is a little difficult, may not good to troubleshoot in the forum. We highly recommend you
to contact our phone support to get more effective support.
Thank you for your support and understanding.
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Sending/receiving files using SFTP

Hi,
Is there a way to use the Secure File Transfer Protocol (SFTP) in ABAP to send/receive files?
I already used the FTP functionality from the function group SFTP, but I'm honestly not sure whether ABAP also handles the secure version of FTP.
If there is this functionality, please provide me the necessary function modules, ...
Thanks in advance
Bye,
Timo

FTP functionality woks fine in ABAP. Below is some code which can be used for FTP access to send/receive files.
Initially, get values for the below fields
DATA: l_user(30) TYPE c VALUE <userid>,
 l_pwd(30) TYPE c VALUE <password>,
 l_host(64) TYPE c VALUE <host string>,
DATA: l_slen TYPE i,
 l_error,
 l_pwd(30) TYPE c.
CONSTANTS: c_dest TYPE rfcdes-rfcdest VALUE 'SAPFTP',
 c_key TYPE i VALUE 26101957.
connect to ftp server
l_pwd = p_pwd.
l_slen = STRLEN( l_pwd ).
CALL FUNCTION 'HTTP_SCRAMBLE'
 EXPORTING
 SOURCE = l_pwd
 sourcelen = l_slen
 key = c_key
 IMPORTING
 destination = l_pwd.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
 EXPORTING
 text = 'Connect to FTP Server'.
CALL FUNCTION 'FTP_CONNECT'
 EXPORTING
 user = l_user
 password = l_pwd
 host = l_host
 rfc_destination = c_dest
 IMPORTING
 handle = w_hdl
 EXCEPTIONS
 OTHERS = 1.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR : w_outfile, w_file_count.
concatenate <directory> <filename> to field.
MOVE field to w_outfile.
PERFORM download_to_ftp TABLES <int'table>
 USING w_outfile.
FORM download_to_ftp TABLES it_tab
 USING l_string TYPE char64.
CALL FUNCTION 'FTP_R3_TO_SERVER'
 EXPORTING
 handle = w_hdl
 fname = l_string
 character_mode = 'X'
 TABLES
 text = it_tab[]
 EXCEPTIONS
 tcpip_error = 1
 command_error = 2
 data_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
 RAISING invalid_output_file.
ENDIF.
Above is used to send.
For receiving use
CALL FUNCTION 'FTP_SERVER_TO_R3'
 EXPORTING
 handle = w_hdl
 fname = l_string
 character_mode = 'X'
 TABLES
 text = it_tab[]
 EXCEPTIONS
 tcpip_error = 1
 command_error = 2
 data_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
 RAISING invalid_output_file.
ENDIF.
Hope this will help U.
Pl. award appropriate points.

Problem while sending/Receiving request using the HttpURLConnection obj

Hi,
We are facing the problem while passing the request in Weblogic.
Looks like there is some problem with Weblogic while sending/Receiving the request using the HttpURLConnection object.
Currently we are migrating 2 applications to WebLogic. Application1 to application2 request should pass.
Below is some example we tried:
"When we send a request to our code using the SSOAdaptor code (which handles the request/session in our application) which is on the SunOne server the request parameters are received by our code successfully. And also in Create User Functionality of application1 we are sending a request to webpass(which is on Sunone Server) using the HttpURLConnection object and the SOAP request is received successfully by the Webpass."
Looks like when we send request (using HttpURLConnection) from a server other than Weblogic to a servlet in a Weblogic the request parameters are received with out issues.
Where as when the request is sent from WebLogic to WebLogic the request parameters are missing some how.
Is there any issue in Weblogic? Please helpus on this.
Thanks,
Nagesh
Edited by: user9307541 on Mar 15, 2010 5:08 AM

Hi,
Please find below scenario for testing.
We have tested the SSOAdaptor code (it is the fucntion name which will send the data from source) locally by hittiing the WPS adaptor URL in a Java client program(TestRequest.java) and the request parameters were reaching the WPS Adapter successfully.
Then we have written two test servlets to test the communication between SSOAdaptor(TestServlet.java) and WPS adaptor(WPSServlet.java).
Functionality of TestSevlet: It is sending a request to WPSServelt similar to the way we are doing it in SSOAdaptor.
Functionality of WPSServlet: It will receive the request parameters and write the parameter Map to console.
We have deployed and these two servlets(in a single webapplication) on Tomcat server and the request parameters are reaching the WPSServlet successfully.
Output on Tomcat server:
before sending request
**********************Inside WPS Servlet -- the request Map is:{TypeAcc=[Ljava.lang.String;@14e3f41, ServiceName=[Ljava.lang.String;@1acd47, GMEPortalUserID=[Ljava.lang.String;@19b04e2, UserID=[Ljava.lang.String;@5dcec6, Country=[Ljava.lang.String;@b25b9d}
after sending request
After this we have deployed these two servlets (with in a single webapplication) on the Weblogic server in Dev machine(path: /apps/usmport/domains/usmport/servers/usmport_admin/upload/ssoAdaptor/WEB-INF/classes/com/gm/gmeportal/security/adaptor) and
now the request parameters are not reaching the WPSServlet.
Output on Weblogic Server:
before sending request
**********************Inside WPS Servlet -- the request Map is:{}
after sending request
Looks like there is some problem with Weblogic while sending/Receiving the request using the HttpURLConnection object.
When we send a request to WPSAdaptor using the Old SSOAdaptor code which is on the SunOne server the request parameters are received by WPS successfully. And also in Create User Functionality of Portal we are sending a request to webpass(which is on Sunone Server) using the HttpURLConnection object and the SOAP request is received successfully by the Webpass.
Looks like when we send request (using HttpURLConnection) from a server other than Weblogic to a servlet in a Weblogic the request parameters are received with out issues. Where as when the request is sent from weblogic to weblogic the request parameters are missing some how.
Please find below javs source code used to test this:
TestRequest.java
import java.io.BufferedReader;
import java.io.DataOutputStream;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.MalformedURLException;
import java.net.URL;
public class TestRequest {
     * @param args
     public static void main(String[] args) throws Exception{
          // TODO Auto-generated method stub
          excutePost("http://localhost:8080/Testing/TestServlet", "GMEPortalUserID=captest.wss@it0555&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
          //System.out.println("********** Now the request is from SSO *****************");
          //excuteGet("http://10.156.0.173:7013/channel21/wpsadapter", "GMEPortalUserID=captest.wss@it0554&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
     public static String excutePost(String targetURL, String urlParameters)
     URL url;
     HttpURLConnection connection = null;
     try {
     //Create connection
     url = new URL(targetURL);
     connection = (HttpURLConnection)url.openConnection();
     connection.setRequestMethod("POST");
     connection.setRequestProperty("Content-Type",
     "application/x-www-form-urlencoded");
     connection.setRequestProperty("Content-Length", "" +
     Integer.toString(urlParameters.getBytes().length));
     connection.setRequestProperty("Content-Language", "en-US");
     connection.setUseCaches (false);
     connection.setDoInput(true);
     connection.setDoOutput(true);
     //Send request
     DataOutputStream wr = new DataOutputStream (
     connection.getOutputStream ());
     wr.writeBytes (urlParameters);
     wr.flush ();
     wr.close ();
     //Get Response
     InputStream is = connection.getInputStream();
     BufferedReader rd = new BufferedReader(new InputStreamReader(is));
     String line;
     StringBuffer response = new StringBuffer();
     while((line = rd.readLine()) != null) {
     response.append(line);
     response.append('\r');
     rd.close();
     System.out.println("Response is:" + response);
     return response.toString();
     } catch (Exception e) {
     e.printStackTrace();
     return null;
     } finally {
     if(connection != null) {
     connection.disconnect();
     public static String excuteGet(String targetURL, String urlParameters) throws Exception
          URL url = new URL(targetURL);
          HttpURLConnection httpurlconnection =
               (HttpURLConnection) url.openConnection();
          /*httpurlconnection.setRequestProperty(
               "cookie",
               constructRequestParams(httpservletrequest.getCookies()));*/
          httpurlconnection.setDoOutput(true);
          httpurlconnection.setDoInput(true);
          httpurlconnection.setRequestProperty(
               "Content-length",
               String.valueOf(urlParameters.length()));
          OutputStream outputstream = httpurlconnection.getOutputStream();
          outputstream.write(urlParameters.getBytes());
          outputstream.flush();
          //Get Response
          try{
     InputStream is = httpurlconnection.getInputStream();
     BufferedReader rd = new BufferedReader(new InputStreamReader(is));
     String line;
     StringBuffer response = new StringBuffer();
     while((line = rd.readLine()) != null) {
     response.append(line);
     response.append('\r');
     rd.close();
     System.out.println("Response from SSO is:" + response);
     return response.toString();
     } catch (Exception e) {
     e.printStackTrace();
     return null;
     } finally {
     if(httpurlconnection != null) {
          httpurlconnection.disconnect();
TestServlet.java
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.URL;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* Servlet implementation class TestServlet
public class TestServlet extends HttpServlet {
     private static final long serialVersionUID = 1L;
* Default constructor.
public TestServlet() {
// TODO Auto-generated constructor stub
     * @see HttpServlet#doGet(HttpServletRequest request, HttpServletResponse response)
     protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          // TODO Auto-generated method stub
          doPost(request,response);
     * @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse response)
     protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          // TODO Auto-generated method stub
          //System.out.println("********************** the request Map is:" + request.getParameterMap());
          try {
               System.out.println("before sending request");
               excuteGet("http://localhost:7003/ssoAdaptor/WPSServlet", "GMEPortalUserID=captest.wss@it0554&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
               System.out.println("after sending request");
          } catch (Exception e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
     public String excuteGet(String targetURL, String urlParameters) throws Exception
          URL url = new URL(targetURL);
          HttpURLConnection httpurlconnection =
               (HttpURLConnection) url.openConnection();
          /*httpurlconnection.setRequestProperty(
               "cookie",
               constructRequestParams(httpservletrequest.getCookies()));*/
          httpurlconnection.setDoOutput(true);
          httpurlconnection.setDoInput(true);
          httpurlconnection.setRequestProperty(
               "Content-length",
               String.valueOf(urlParameters.length()));
          OutputStream outputstream = httpurlconnection.getOutputStream();
          outputstream.write(urlParameters.getBytes());
          outputstream.flush();
          //Get Response
          try{
     InputStream is = httpurlconnection.getInputStream();
     BufferedReader rd = new BufferedReader(new InputStreamReader(is));
     String line;
     StringBuffer response = new StringBuffer();
     while((line = rd.readLine()) != null) {
     response.append(line);
     response.append('\r');
     rd.close();
     //System.out.println("Response from SSO is:" + response);
     return response.toString();
     } catch (Exception e) {
     e.printStackTrace();
     return null;
     } finally {
     if(httpurlconnection != null) {
          httpurlconnection.disconnect();
WPSServlet.java
import java.io.IOException;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* Servlet implementation class WPSServlet
public class WPSServlet extends HttpServlet {
     private static final long serialVersionUID = 1L;
* @see HttpServlet#HttpServlet()
public WPSServlet() {
super();
// TODO Auto-generated constructor stub
     * @see HttpServlet#doGet(HttpServletRequest request, HttpServletResponse response)
     protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          // TODO Auto-generated method stub
          System.out.println("**********************Inside WPS Servlet -- the request Map is:" + request.getParameterMap());
     * @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse response)
     protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          // TODO Auto-generated method stub
          doGet(request,response);
Thanks,
Nagesh

Send/receive IDOCs to SOLMAN system using AS2 protocol!

Hi All,
I want to send/receive IDOC file to/from web based SOLMAN system. Currently I'm using FTP server to send/receive IDOC file.
As of now the current process is to send the IDOCs from ECC to FTP server and from FTP to third party and vice-versa. But due to some constraints, I'm bound to use web based SOLMAN system. Please, can you let me know how to send/receive IDOC files to SOLMAN. Is there standrad FM/method to connect to SOLMAN from ECC as in case of FTP we have FM 'FTP_CONNECT'. Heard that same functionality in case of SOLMAN can be achieved through AS2 protocol.
Kindly help.
Thanks.
Regards,
Mukesh

Hello Patrice
We have same issue. Is it possible to use IDoc (XML) directly with SAP 5.0 with SOAP (HTTP) without XI?
Since your que is three years old, I'm sure you must have found some method for this.
We'll highly appreciate your help.
Regards: Gaurave

HT5225 unable to send receive mail using Mail 2.1.3

Ever since iCloud took over, I am no longer able to send/receive mail using Mail 2.1.3 on my 10.4.11 version. I didn't think it would affect it. Someone please help as to how I can rectify the issue!

Hi,
Please review the following note:
Note: 371830.1 - Notification Mailer Does Not Start, Remains In Status Starting
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=371830.1
If the above does not help, I suggest you run "Workflow Diagnostics" test and see if it returns any error/warning messages.
Note: 274764.1 - Oracle Workflow Cartridge Workflow Java Mailer Setup Test
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=274764.1
Note: 378281.1 - How Does One Verify The Notification Mailer Is Functioning Properly?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=378281.1
Regards,
Hussein

Tuning a procedure and using dbms_job.submit proc that call's functions

Hi
I have Procedure that have 3 curosrs which are nested one below with in each other
and it looks as below
it's structure will look some thing look like this
declare
empno_fetch number;
CURSOR deu_process IS
SELECT empno
FROM emp
WHERE flg_process = 'N'
AND ROWNUM <= 5000
ORDER BY empno;
CURSOR dup_all IS --c1 fetch around 400000 records
(select empno
from emp
where empno>l_empno
order by empno
where rownum<=empno_fetch;
CURSOR rules IS --c2
SELECT rule_id, rule_score, name_Of_func
FROM rule;
begin
l_count := 1;
OPEN dedupe_rule_attr;
LOOP
BEGIN
Here one loop is used for fetching 5000 records at time and
Here deu_process cursor is opened ,assume it fetches one record
Here another cursor dup_all is used for fetching the records and assume it fetched 400000 then
Here another cursor is opened name where it fetches 10 rows
Here logic is if first row then
call's stored function which has following functionalty
it compares fields such as address of outer most cursor i.e deu_process with all the address of the other rows i.e 400000 rows and return a number
if second row then
call's another stored function which has
compares other fields such as first name,last name
if third then other field
so on ....
up to 10
and then finally ends
so if i comment all the rules loop then it takes only one min to execute .If it validaes all of them if takes 14 minutes to execute .so there is problem in that 10 procedures to execute
So i found an approach to run all the rules simultaneously using dbms_job .But i face a problem that i can't uderstand how to send the input and out put parameter's to calling procedure.And these parameter's must be passed by variable from called procedure to calling procedure
Please suggest me what is the syntax of dbms_job with input and output parameters with variable's that must be passed as formal parameter's
Regarding DBMS_JOB.SUBMIT I am getting following error
Declare
x number:=1;
b number;
jobnumber number;
BEGIN
DBMS_JOB.SUBMIT(JOB => jobnumber,
WHAT => 'vamsi_proc1('||x||');',
NEXT_DATE => (sysdate+1/(86400)),
INTERVAL => null);
--dbms_output.put_line('value of b is '||b);
COMMIT;
END;
Declare
ERROR at line 1:
ORA-06550: line 1, column 107:
PLS-00103: Encountered the symbol ")" when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
The symbol "null" was substituted for ")" to continue.
ORA-06512: at "SYS.DBMS_JOB", line 79
ORA-06512: at "SYS.DBMS_JOB", line 136
ORA-06512: at line 5
create or replace procedure vamsi_proc1(v in out number) as
x number(4);
begin
--a:=1;
insert into emp_vamsi(select 677,ENAME,SAL,DEPTNO,MANAGER from emp where empno=v);
commit;
--a:=2;
--x:=a;
end;
using dbms_job.submit proc that call's functions which returns out and in parameters to calling procedure environment .I can't get this with out using data base table's.
If you have any method for this Plese suggest
And also please suggest me weather using job's is a good idea ,If not than suggest me what ever will the other approach.
Thank's and Regard's
vamsi krishna

Hi 
I have looked at all sql trace file , 
I found that there is no problem in sql statemens all of them are using proper indexes execpt the folllowing statement 
 
SELECT nvl(COUNT(ref_appln_no),0) 
FROM ci_cust_dedupe_mast 
WHERE flg_mnt_status='A' 
 
This statement executes only once for 1*3,77000*10 times 
The function that i had sent previously executes more than 4000000*20 times . 
I think all it takes is only for iterations that are caused 
 
I am also sending sql trace for reference
 
TKPROF: Release 9.2.0.4.0 - Production on Mon Aug 14 17:30:50 2006 
 
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved. 
 
Trace file: afhuat_ora_2204.trc 
Sort options: default 
 
******************************************************************************** 
count = number of times OCI procedure was executed 
cpu = cpu time in seconds executing 
elapsed = elapsed time in seconds executing 
disk = number of physical reads of buffers from disk 
query = number of buffers gotten for consistent read 
current = number of buffers gotten in current mode (usually for update) 
rows = number of rows processed by the fetch or execute call 
******************************************************************************** 
 
alter session set sql_trace=true 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 0 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 1 0.00 0.00 0 0 0 0 
 
Misses in library cache during parse: 0 
Misses in library cache during execute: 1 
Optimizer goal: CHOOSE 
Parsing user id: 61 
******************************************************************************** 
 
declare 
x varchar2(100); 
y varchar2(100); 
ap number; 
begin 
x:=to_char(sysdate,'dd-mon-rrrr hh:mi:ss'); 
ap:=ap_ci_dedupe_proc; 
y:=to_char(sysdate,'dd-mon-rrrr hh:mi:ss'); 
dbms_output.put_line(x||' '||ap); 
dbms_output.put_line(y||' '||ap); 
end; 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 820.23 0 0 0 1 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 2 0.00 820.23 0 0 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 
******************************************************************************** 
 
select user# 
from 
sys.user$ where name = 'OUTLN' 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.00 0 2 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.00 0 2 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
1 TABLE ACCESS BY INDEX ROWID USER$ (cr=2 r=0 w=0 time=31 us) 
1 INDEX UNIQUE SCAN I_USER1 (cr=1 r=0 w=0 time=18 us)(object id 44) 
 
******************************************************************************** 
 
SELECT * 
FROM ci_dedupe_rule_attr 
ORDER BY cod_rule_attr_id 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.06 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 21 0.00 0.01 1 3 0 20 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 23 0.00 0.07 1 3 0 20 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT COUNT(1) 
FROM ci_cust_dedupe_mast 
WHERE flg_process = 'N' 
AND 
AND 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.00 0 22 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.00 0 22 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT nvl(COUNT(ref_appln_no),0) 
FROM ci_cust_dedupe_mast 
WHERE flg_mnt_status='A' 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 1.68 3.03 18867 21183 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 1.68 3.03 18867 21183 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT ref_appln_no 
FROM ci_cust_dedupe_mast 
WHERE flg_process = 'N' 
AND 
AND 
AND 
ORDER BY ref_appln_no 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.00 0 0 0 0 
Fetch 3 0.00 0.09 18 43 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 6 0.00 0.09 18 43 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT 
FROM 
WHERE 
AND 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 377709 8.71 7.64 0 0 0 0 
Fetch 377709 18.18 60.19 19802 1510836 0 377709 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 755419 26.90 67.84 19802 1510836 0 377709 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT NVL(MAX(cod_serial_no),0) + 1 
FROM ci_dedupe_details_mast 
WHERE ref_appln_no = :b1 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.01 2 2 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.01 2 2 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT COUNT(1) 
FROM ci_dedupe_details_mast 
WHERE ref_appln_no = :b1 
AND 
AND flg_mnt_status = 'A' 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.00 0 3 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.00 0 3 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT ref_appln_no FROM 
( 
SELECT ref_appln_no 
FROM ci_cust_dedupe_mast 
WHERE 
AND 
ORDER BY ref_appln_no 
) 
WHERE ROWNUM <= :b2 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 77 0.01 0.00 0 0 0 0 
Fetch 377786 10.21 12.33 908 377865 0 377709 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 377864 10.23 12.33 908 377865 0 377709 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT cod_rule_id, cod_rule_score, nam_rule_func 
FROM ci_dedupe_rule_defn 
WHERE flg_valid = 'Y' 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 377708 5.50 4.03 0 0 0 0 
Fetch 4154788 62.79 54.04 16 4532496 0 3777080 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 4532497 68.29 58.07 16 4532496 0 3777080 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
select con#,obj#,rcon#,enabled,nvl(defer,0) 
from 
cdef$ where robj#=:1 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.00 0 0 0 0 
Fetch 2 0.00 0.01 1 2 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 6 0.00 0.01 1 2 0 0 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
******************************************************************************** 
 
select con#,type#,condlength,intcols,robj#,rcon#,match#,refact,nvl(enabled,0), 
rowid,cols,nvl(defer,0),mtime,nvl(spare1,0) 
from 
cdef$ where obj#=:1 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.00 0 0 0 0 
Fetch 2 0.00 0.01 2 4 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 6 0.00 0.01 2 4 0 0 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
******************************************************************************** 
 
select u.name,o.name, t.update$, t.insert$, t.delete$, t.enabled 
from 
obj$ o,user$ u,trigger$ t where t.baseobject=:1 and t.obj#=o.obj# and 
o.owner#=u.user# order by o.obj# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 3 0.00 0.00 0 0 0 0 
Execute 3 0.00 0.00 0 0 0 0 
Fetch 4 0.00 0.05 6 9 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 10 0.00 0.05 6 9 0 1 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
0 SORT ORDER BY (cr=1 r=1 w=0 time=4772 us) 
0 NESTED LOOPS (cr=1 r=1 w=0 time=4747 us) 
0 NESTED LOOPS (cr=1 r=1 w=0 time=4744 us) 
0 TABLE ACCESS BY INDEX ROWID TRIGGER$ (cr=1 r=1 w=0 time=4740 us) 
0 INDEX RANGE SCAN I_TRIGGER1 (cr=1 r=1 w=0 time=4736 us)(object id 130) 
0 TABLE ACCESS BY INDEX ROWID OBJ$ (cr=0 r=0 w=0 time=0 us) 
0 INDEX UNIQUE SCAN I_OBJ1 (cr=0 r=0 w=0 time=0 us)(object id 36) 
0 TABLE ACCESS CLUSTER USER$ (cr=0 r=0 w=0 time=0 us) 
0 INDEX UNIQUE SCAN I_USER# (cr=0 r=0 w=0 time=0 us)(object id 11) 
 
******************************************************************************** 
 
select o.owner#,o.name,o.namespace,o.remoteowner,o.linkname,o.subname, 
o.dataobj#,o.flags 
from 
obj$ o where o.obj#=:1 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 3 0.00 0.00 0 0 0 0 
Fetch 3 0.00 0.02 5 9 0 3 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 8 0.00 0.02 5 9 0 3 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 3) 
******************************************************************************** 
 
select col#, grantee#, privilege#,max(mod(nvl(option$,0),2)) 
from 
objauth$ where obj#=:1 and col# is not null group by privilege#, col#, 
grantee# order by col#, grantee# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 3 0.00 0.00 0 0 0 0 
Execute 3 0.00 0.00 0 0 0 0 
Fetch 3 0.00 0.01 2 6 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 9 0.00 0.02 2 6 0 0 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
******************************************************************************** 
 
INSERT INTO ci_dedupe_details_mast 
VALUES 
( 
:b6, 
:b5, 
:b4, 
:b3, 
'Y', 
'N', 
'', 
0, 
SYSDATE, 
'A', 
' ', 
:b2, 
'SYSTEM', 
:b1, 
1 
) 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.01 3 3 0 0 
Execute 1 0.00 0.01 4 1 6 1 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 2 0.00 0.02 7 4 6 1 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
select obj#,type#,ctime,mtime,stime,status,dataobj#,flags,oid$, spare1, 
spare2 
from 
obj$ where owner#=:1 and name=:2 and namespace=:3 and remoteowner is null 
and linkname is null and subname is null 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.01 2 3 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.01 2 3 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
******************************************************************************** 
 
select audit$,options 
from 
procedure$ where obj#=:1 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.01 3 3 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.01 3 3 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
1 TABLE ACCESS BY INDEX ROWID PROCEDURE$ (cr=3 r=3 w=0 time=14110 us) 
1 INDEX UNIQUE SCAN I_PROCEDURE1 (cr=2 r=2 w=0 time=13871 us)(object id 115) 
 
******************************************************************************** 
 
select owner#,name,namespace,remoteowner,linkname,p_timestamp,p_obj#, 
d_owner#, nvl(property,0),subname 
from 
dependency$,obj$ where d_obj#=:1 and p_obj#=obj#(+) order by order# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 4 0.00 0.07 8 12 0 3 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 6 0.00 0.07 8 12 0 3 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
3 SORT ORDER BY (cr=12 r=8 w=0 time=72867 us) 
3 NESTED LOOPS OUTER (cr=12 r=8 w=0 time=72813 us) 
3 TABLE ACCESS BY INDEX ROWID DEPENDENCY$ (cr=4 r=4 w=0 time=41297 us) 
3 INDEX RANGE SCAN I_DEPENDENCY1 (cr=3 r=3 w=0 time=25897 us)(object id 127) 
3 TABLE ACCESS BY INDEX ROWID OBJ$ (cr=8 r=4 w=0 time=31484 us) 
3 INDEX UNIQUE SCAN I_OBJ1 (cr=5 r=2 w=0 time=14872 us)(object id 36) 
 
******************************************************************************** 
 
select order#,columns,types 
from 
access$ where d_obj#=:1 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 2 0.00 0.02 3 4 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 4 0.00 0.02 3 4 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
1 TABLE ACCESS BY INDEX ROWID ACCESS$ (cr=4 r=3 w=0 time=27026 us) 
1 INDEX RANGE SCAN I_ACCESS1 (cr=3 r=2 w=0 time=21717 us)(object id 129) 
 
******************************************************************************** 
 
select /*+ index(idl_sb4$ i_idl_sb41) +*/ piece#,length,piece 
from 
idl_sb4$ where obj#=:1 and part=:2 and version=:3 order by piece# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.00 0 0 0 0 
Fetch 3 0.00 0.02 3 7 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 7 0.00 0.02 3 7 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
0 TABLE ACCESS BY INDEX ROWID IDL_SB4$ (cr=2 r=2 w=0 time=19830 us) 
0 INDEX RANGE SCAN I_IDL_SB41 (cr=2 r=2 w=0 time=19826 us)(object id 123) 
 
******************************************************************************** 
 
select /*+ index(idl_ub1$ i_idl_ub11) +*/ piece#,length,piece 
from 
idl_ub1$ where obj#=:1 and part=:2 and version=:3 order by piece# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.00 0 0 0 0 
Fetch 3 0.00 0.03 3 9 0 2 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 7 0.00 0.03 3 9 0 2 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
0 TABLE ACCESS BY INDEX ROWID IDL_UB1$ (cr=2 r=2 w=0 time=21757 us) 
0 INDEX RANGE SCAN I_IDL_UB11 (cr=2 r=2 w=0 time=21753 us)(object id 120) 
 
******************************************************************************** 
 
select /*+ index(idl_char$ i_idl_char1) +*/ piece#,length,piece 
from 
idl_char$ where obj#=:1 and part=:2 and version=:3 order by piece# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.00 0 0 0 0 
Fetch 2 0.00 0.01 2 4 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 6 0.00 0.01 2 4 0 0 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
0 TABLE ACCESS BY INDEX ROWID IDL_CHAR$ (cr=2 r=2 w=0 time=19465 us) 
0 INDEX RANGE SCAN I_IDL_CHAR1 (cr=2 r=2 w=0 time=19461 us)(object id 121) 
 
******************************************************************************** 
 
select /*+ index(idl_ub2$ i_idl_ub21) +*/ piece#,length,piece 
from 
idl_ub2$ where obj#=:1 and part=:2 and version=:3 order by piece# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.00 0 0 0 0 
Fetch 2 0.00 0.01 2 4 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 6 0.00 0.01 2 4 0 0 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
0 TABLE ACCESS BY INDEX ROWID IDL_UB2$ (cr=2 r=2 w=0 time=15070 us) 
0 INDEX RANGE SCAN I_IDL_UB21 (cr=2 r=2 w=0 time=15066 us)(object id 122) 
 
******************************************************************************** 
 
select baseobject,type#,update$,insert$,delete$,refnewname,refoldname, 
whenclause,definition,enabled,property,sys_evts,nttrigcol,nttrigatt, 
refprtname,rowid 
from 
trigger$ where obj# =:1 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.00 1 2 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.00 1 2 0 1 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
1 TABLE ACCESS BY INDEX ROWID TRIGGER$ (cr=2 r=1 w=0 time=9352 us) 
1 INDEX UNIQUE SCAN I_TRIGGER2 (cr=1 r=1 w=0 time=9340 us)(object id 131) 
 
******************************************************************************** 
 
select owner# 
from 
obj$ o where obj# = :1 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.00 0 3 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.00 0 3 0 1 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
1 TABLE ACCESS BY INDEX ROWID OBJ$ (cr=3 r=0 w=0 time=15 us) 
1 INDEX UNIQUE SCAN I_OBJ1 (cr=2 r=0 w=0 time=7 us)(object id 36) 
 
******************************************************************************** 
 
select tc.type#,tc.intcol#,tc.position#,c.type#, c.length,c.scale, 
c.precision#,c.charsetid,c.charsetform 
from 
triggercol$ tc,col$ c ,trigger$ tr where tc.obj#=:1 and c.obj#=:2 and 
tc.intcol#=c.intcol# and tr.obj# = tc.obj# and (bitand(tr.property,32) != 
32 or bitand(tc.type#,20) = 20) union select type#,intcol#,position#,69,0,0, 
0,0,0 from triggercol$ where obj#=:3 and intcol#=1001 union select tc.type#, 
tc.intcol#,tc.position#,121,0,0,0,0,0 from triggercol$ tc,trigger$ tr where 
tr.obj# = tc.obj# and bitand(tr.property,32) = 32 and tc.obj# = :4 and 
bitand(tc.type#,20) != 20 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 34 0.00 0.05 8 236 0 33 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 36 0.00 0.05 8 236 0 33 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
33 SORT UNIQUE (cr=236 r=8 w=0 time=54877 us) 
33 UNION-ALL (cr=236 r=8 w=0 time=54606 us) 
33 NESTED LOOPS (cr=197 r=8 w=0 time=53779 us) 
33 NESTED LOOPS (cr=162 r=8 w=0 time=53053 us) 
77 TABLE ACCESS CLUSTER COL$ (cr=83 r=6 w=0 time=40045 us) 
1 INDEX UNIQUE SCAN I_OBJ# (cr=2 r=2 w=0 time=13764 us)(object id 3) 
33 INDEX RANGE SCAN I_TRIGGERCOL2 (cr=79 r=2 w=0 time=12523 us)(object id 133) 
33 TABLE ACCESS BY INDEX ROWID TRIGGER$ (cr=35 r=0 w=0 time=466 us) 
33 INDEX UNIQUE SCAN I_TRIGGER2 (cr=2 r=0 w=0 time=152 us)(object id 131) 
0 INDEX RANGE SCAN I_TRIGGERCOL2 (cr=2 r=0 w=0 time=5 us)(object id 133) 
0 NESTED LOOPS (cr=37 r=0 w=0 time=574 us) 
33 INDEX RANGE SCAN I_TRIGGERCOL2 (cr=2 r=0 w=0 time=81 us)(object id 133) 
0 TABLE ACCESS BY INDEX ROWID TRIGGER$ (cr=35 r=0 w=0 time=350 us) 
33 INDEX UNIQUE SCAN I_TRIGGER2 (cr=2 r=0 w=0 time=139 us)(object id 131) 
 
******************************************************************************** 
 
select grantee#,privilege#,nvl(col#,0),max(mod(nvl(option$,0),2)) 
from 
objauth$ where obj#=:1 group by grantee#,privilege#,nvl(col#,0) order by 
grantee# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 3 0.00 0.00 0 0 0 0 
Execute 3 0.00 0.00 0 0 0 0 
Fetch 3 0.00 0.00 0 6 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 9 0.00 0.00 0 6 0 0 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
******************************************************************************** 
 
UPDATE 
SET 
WHERE ref_appln_no = :b1 
AND flg_mnt_status = 'A' 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.16 9 8 17 1 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 2 0.00 0.16 9 8 17 1 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
select type#,blocks,extents,minexts,maxexts,extsize,extpct,user#,iniexts, 
NVL(lists,65535),NVL(groups,65535),cachehint,hwmincr, NVL(spare1,0) 
from 
seg$ where ts#=:1 and file#=:2 and block#=:3 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 3 0.00 0.00 0 0 0 0 
Execute 3 0.00 0.00 0 0 0 0 
Fetch 3 0.00 0.01 3 9 0 3 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 9 0.00 0.01 3 9 0 3 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
1 TABLE ACCESS CLUSTER SEG$ (cr=3 r=3 w=0 time=17332 us) 
1 INDEX UNIQUE SCAN I_FILE#_BLOCK# (cr=2 r=2 w=0 time=10258 us)(object id 9) 
 
******************************************************************************** 
 
INSERT INTO ci_dedupe_details 
VALUES 
( 
:b31, 
:b32, 
:b31, 
:b30, 
:b29, 
:b28, 
:b27, 
:b26, 
:b25, 
:b24, 
:b23, 
:b22, 
:b21, 
:b20, 
:b19, 
:b18, 
:b17, 
:b16, 
:b15, 
:b14, 
:b13, 
:b12, 
:b11, 
:b10, 
:b9, 
:b8, 
:b7, 
:b6, 
:b5, 
:b4, 
:b3, 
:b2, 
:b1, 
'N', 
0, 
'E' ) 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.01 0.03 4 1 5 1 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 2 0.01 0.03 4 1 5 1 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
select /*+ rule */ bucket_cnt, row_cnt, cache_cnt, null_cnt, timestamp#, 
sample_size, minimum, maximum, distcnt, lowval, hival, density, col#, 
spare1, spare2, avgcln 
from 
hist_head$ where obj#=:1 and intcol#=:2 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 36 0.00 0.00 0 0 0 0 
Fetch 36 0.00 0.02 3 108 0 36 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 73 0.00 0.02 3 108 0 36 
 
Misses in library cache during parse: 1 
Optimizer goal: RULE 
Parsing user id: SYS (recursive depth: 2) 
******************************************************************************** 
 
COMMIT 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.01 0 0 1 0 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 4 0.00 0.01 0 0 1 0 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END; 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 1 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 2 0.00 0.00 0 0 0 1 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: 61 
 
 
 
******************************************************************************** 
 
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 3 0.00 820.23 0 0 0 2 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 5 0.00 820.23 0 0 0 2 
 
Misses in library cache during parse: 1 
Misses in library cache during execute: 1 
 
 
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 49 0.00 0.10 3 3 0 0 
Execute 755577 14.25 11.90 17 10 29 3 
Fetch 4910422 92.89 130.18 39671 6442895 0 4532611 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 5666048 107.14 142.19 39691 6442908 29 4532614 
 
Misses in library cache during parse: 11 
 
17 user SQL statements in session. 
35 internal SQL statements in session. 
52 SQL statements in session. 
******************************************************************************** 
Trace file: afhuat_ora_2204.trc 
Trace file compatibility: 9.00.01 
Sort options: default 
 
1 session in tracefile. 
17 user SQL statements in trace file. 
35 internal SQL statements in trace file. 
52 SQL statements in trace file. 
36 unique SQL statements in trace file. 
5666466 lines in trace file. 
Regards 
vamsi krishna

Use of Sender & Receiver Function in Constant Functions

Similar Messages

Maybe you are looking for