User can't access interactive planning screen

Hi
we has one user already can logon APO init screen. but when him enter T-code: /SAPAPO/SDP94
there has same error "No vaild version exists for planning area '9ADP01' do you want to initiallize a planning
version?"
and either check YES or No, also can't display Planning screen.
i think there has some authorization not give this user.
could you let me know how to reslove this issue?
Thanks Kim
Edited by: Songhua Kim on Jul 18, 2008 10:17 AM

Hi Kim,
    I think there is no authorization Problem.Whenever you open Interactive demand planning Screen you will find default planning Book,which is used by previous user with same transaction.
   Try following steps:
1.Go to /n/sapapo/sdp94 T-code.
2.You will find one Pop Up that & massage in that "No vaild version exists for planning area '9ADP01' do you want to initiallize a planning
version?"
3.Press Yes.
4.In planning version field , enter active version 000
5.Enter
6.Press Execute Button.
    You will get all planning book.Select your respective planning & it`s data view.
Hope so it will helpful for you.
Regards
Sujay

Similar Messages

Other user can't access to OBIEE 11G installed on a server

Hello,
We have installed OBIEE 11G on a server ( windows sever 2008 r2) with admin account, and it works fine, But others users can't access to obiee 11g ( administration icons are white in their sessions) even they have admin rights.
Can anyone tell me what should we do??
Thank you.

Hi,
This is the exact format how my tnsnames.ora file looks. sorry, I can ping it in command prompt now. In my connection pool i tried first DSN = ab.bc.xy.zx, did not work. Then I saw oracle's default repository and changed my DSN to your suggested format starting from "DESCRPTION" to rest. Still no luck Do you think, i should put the same TNS in my local machine??
ab.bc.xy.zx =
(DESCRIPTION =
    #(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.110)(PORT = 1521))
    #(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.120)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.130)(PORT = 1521))
    (LOAD_BALANCE = yes)
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SID = cap2)
thanks,
BK.

Saving so that windows user can have access?

I have my project all ready and those with quick time...loads up perfectly. However those who have windows have a long wait or pile will not come up. Do you know how i can save my final cut express project so that window users can have access to it?

thank you. one last question....the quick time movie file can not be seen when opening on a windows. do you know if i need a quick time pro so that i can convert it? or is there a way that i don't know about?

Can't access email. Screen is frozen with spinning multi colored circle

Can not access emails. Screen is frozen with spinning multi colored circle

press "command+option+esc" to quit the unresponsive program.

Why the apple store is so expensive and why the apple users can't access for free after spending huge amount in apple phone ?

Why the apple store is so expensive and why the apple users can't access for free after spending huge amount in apple phone ?

The Apple store is correct. The warranty is not international, and Apple will not accept or return iPhones shipped from a different country. You need to ship the phone to somebody in Hong Kong who can take it in to Apple for repair, or pay a third party repair shop in the Philippines to fix it.

Can't access iTunes and Screen Sharing sharing services on my mac Mini

Since several weeks now I face a networking issue of the stranger kind.
Currently I've got my Mac mini acting as the central server for music, photos and files in my home. Central Network Mgmt device is a Wireless Lan router.
In the past I was accessing the Mac Mini from my MacBook via Screen Sharing this doesn't work anymore. When requesting the service the connection effort just runs idle. In iTunes on my MacBook I can see the Libary of my Mac Mini iTunes but clicking on it brings the rotateing ball and after a certain while the message that the iTunes Libary is not responding and that I should check my Firewall settings. Which I did on both computers and they are wide open. 'Ipfw show' in Terminal brings back the message 'Open for any to any communication' also on both computers.
Makeing use of the File sharing service from the MacBook to the MacMini works but it takes a extreme long while until the shared folder appears on the MacBook.
Trying to access from the Mac Mini my MacBook for all these services is no problem.
One more thing is that my Mac Mini cannot access the Wireless Lan router anymore thru the Web Browser or thru a Ping. Here I get the message 'Ping Send to: permission denied'. I changed the Router still the same message. Internet traffic is only possible after I manually applied a DNS Server with its IP number.
Anyone out there who could help? I'm close to completely reinstall my Mac Mini but would naturally love to avoid this.

wireduck,
Highlight the music folder and on the keyboard type (Command) + i: on the window that opens scroll down if need and click on the lock on the bottom right. Type in an Admin User name and password. Then under the (Sharing & Permissions:) make sure the users you want to open the folder are listed and that there (Privilege) is set to @ least Read. If not hit the ( + ) sign and add them. After you have that all set up click on the little gear next to the ( - )s sign and (Apply to a enclosed items). that way each user can read the files. After that the little ( - ) sign should be gone on the folders.
Hope that helps.

Avoiding save option POP upin a interactive planning screen

Hi,
I have a requirement to avoid the Pop up menu which asks to save changes, when i close the interactive planning table. This save option comes up even though i havent changed any data. So i need to switch off this pop up, if i am not really doing nay changes in the planning table. I just view the data.
regards
Karthik

Hi,
If you are just viewing, why don't you set the parameter /SAPAPO/SDP94_D_MODE to X in user own data or SU01 - parameters tab. It puts you in display mode by default and when you go to edit mode, it works as usual.
Checking whether there are any changes and then giving the popup may put extra load on the system...but you can try with BADI /SAPAPO/SDP_INTERACT, method SAFETY_POPUP_EXCLUDE...
I haven't tried this though.

Can you control when a user can have access to the network

i want to set a time frame when users can be on network

You do this using Timed Access in AirPort Utility. It is possible to set daily time limits for each wireless device that connects to the wireless network.
You can even have multiple rules for the same device. Example, a device could connect from 9 AM to 9PM Weekdays and from 9 AM to 11 PM on Weekends.
For more information, click the Help menu at the top of the screen in AirPort Utility.
Click AirPort Utility Help
On the left panel of the next page, click on Setting up a Wi-Fi Network
Select the following topics on the right:
Control when a user can access your network
Control access to your wireless network

Windows XP users can't access SMB/CIFS shares on MAC OSX10.4.4 Xserve bug?

The Xserves are new for us. This problem involves two of the 10.4 xerserves.
1 serves as an Open Directory System Master(10.4.3). 2 Serves as a file share & backup (10.4.4).
Both are production machines and cannot easily be restarted.
There is no Windows network, Active Directory or Windows domain in our network.
We created a SMB and AFP share on the file server which is a member of the Open Directory. (It is bound and kerberized to server 1).
The users all have accounts in the OD system and all passwords are Open Directory. Our users can ssh into the various xserves (including the file share server 2) and authenticate against OD.
We made the shares available via smb under Protocols --> Windows File Settings. We turned the Windows Service on in Server Admin. I'ts a standalone server and all the authentication types are checked under access.
The MAC (powerbook) users can access the share fine. The Windows users can't. The Windows laptops can see the file share server (through search - not visable is Network Neighborhood) but when they try and connect they are presented by an authentication box that just keeps cycling over and over regardless of what the user types as user name & passwd.
I tried to access the smb share with my powerbook(10.4.4) and have the same issue. I'm presented with an authentication box but authentication fails.
The Windows File Service Log shows:
auth.c:checkntlmpassword(312)
checkntlmpassword: Authentication for user [csmith] -> [csmith] FAILED with error NTSTATUS_WRONGPASSWORD
[2006/02/24 21:52:03, 1] authods.c:opendirectory_authuser(212)
User "csmith" failed to authenticate with "dsAuthMethodStandard:dsAuthSMBNTKey" (-14090)
[2006/02/24 21:52:03, 1] authods.c:opendirectory_smb_pwd_checkntlmv1(427)
opendirectorysmb_pwd_checkntlmv1: [-14090]opendirectoryauthuser
[2006/02/24 21:52:03, 2] /SourceCache/samba/samba-92.15/samba/source/auth/auth.c:checkntlmpassword(312)
checkntlmpassword: Authentication for user [csmith] -> [csmith] FAILED with error NTSTATUS_WRONGPASSWORD
[2006/02/24 21:52:03, 1] authods.c:opendirectory_authuser(212)
User "csmith" failed to authenticate with "dsAuthMethodStandard:dsAuthSMBNTKey" (-14090)
[2006/02/24 21:52:03, 1] authods.c:opendirectory_smb_pwd_checkntlmv1(427)
opendirectorysmb_pwd_checkntlmv1: [-14090]opendirectoryauthuser
[2006/02/24 21:52:03, 2] /SourceCache/samba/samba-92.15/samba/source/auth/auth.c:checkntlmpassword(312)
checkntlmpassword: Authentication for user [csmith] -> [csmith] FAILED with error NTSTATUS_WRONGPASSWORD
[2006/02/24 21:52:03, 2] /SourceCache/samba/samba-92.15/samba/source/smbd/server.c:exit_server(595)
Closing connections
I've googled this error and it seems that there a lot of engineers out there with the same problem but no answers. Could this be a bug with Apple's SMB process? Is there something I've missed? (I've looked at the smb.conf and have even turned off deny clear text passwords - I've even tried granting guest access) Anyone have any ideas?

On the server itself, run the following in the Terminal:
(from a few different sources):
run ps -auxw | grep Password
to see if Password service is running
Also check the logs in /Library/Logs/PasswordService
Try: id username
and see if you get some info returned.
Ex: id jimguy
You should get some info about uid, gid, groups.
sudo killall -USR1 DirectoryService
Then try to login from a client machine.
Be sure to re-issue
sudo killall -USR1 DirectoryService
in order to stop the (far more) verbose logging.
Then check the logs in /Library/Logs/DirectoryService
In Open Directory, you might want to revert to standalone (this will destory the existing OD setup) and then re-promote to OD Master. You'll lose all OD users however when doing so. If you don't have many, this may be best.
You'll want to verify the hostname, and forward & reverse DNS lookups before re-promoting, and watch for any errors when promoting to OD master
See, when you say "The real clue is that I'm unable to access the shares from my Powerbook G4 with my Open Directory account. I can log in to the file share as the local admin though and that's why I'm thinking there is a bug in the samba/OD relationship. " - that's the real clue indeed.
The local admin account, the first admin account you setup on the server, is indeed local, and resides in NetInfo, not Open Directory.
So something is afoul in your OD.

Multiple Users Can't Access Time Capsule Data

My wife and I have two separate Apple MacBooks that share a Time Capsule. We have different account names on these respective computers. I initially set up my Time Capsule and created folders that I can access from Finder.app when I connect over our wireless network. In Airport Utility.app, under the "Disks" tab, I set up the shared disks "with device password", so that she and I can mutually access all the data on the Time Capsule. However, when I try to access it from her computer, I click on the Time Capsule in Finder.app and get this dumb Sharepoint icon--a total dead end. I created another account on her computer with the same name as the account on my own computer, and from that account, I'm able to access all of the data on the Time Capsule. This therefore seems to be a permissions issue, but I've checked all of the files and folders on the Time Capsule and ensured that they all have "everyone read & write" access, so there should be no restrictions on access to this data.
Why are the volumes on my Time Capsule sensitive to the user accessing them? How do I set up data repositories on the Time Capsule that can be accessible to all users on my network? I'm out of ideas.

Are both computers actually running Mavericks??
This is very typical Yosemite problem.
For some reason which I don't yet understand Yosemite is horrible at handling network drives.
dumb Sharepoint icon
Sharepoint is a dlink app?? If you have ever had some app loaded that uses a different product to apple then it can mess your access.
WD share stuff seems to be the worst and causes no end of problems.
What you are seeing btw is the TC is not a NAS.. you are trying to use it as one.. but it isn't.

User can't access a PDF with Forms

On a website, we have a main menu PDF with a list of bookmarks linking to individual user manual PDFs. When a user tries to access a user manual PDF with forms in it, they get the error "There was an error processing a page. There was a problem reading this document (118)." The user dosen't appear to have any problem opening a PDF that doesn't contain forms.
The user is using Reader 10.1.3 and Internet Explorer 8.0.6001.19328. This user cannot access the PDFs with forms when given a direct link to the file either. However, if the user is sent the PDF file they can open it with Reader and in their browser. I'm stumped. Does any body know what's going on here?

Is there a browser setting that can affect if a PDF opens? Something in security, perhaps? I've looked around and don't see anything obvious that could allow/disallow opening a PDF file that contains form fields.
Jeanie

Anonymous user can't access WPC pages in TREX search result list

An anonymous user can use TREX service to enter query string in search iView and to get the list of results.
But when he tries to open a page (web_paragraph or web_article ) generated by WPC (by clicking on the page link in result list) a logon screen appears in a popup window.
The URL of the window is /irj/servlet/prt/prtroot/... rather than irj/go/km/u2026 .
How to work around this?
At the same time he can see Word, Excel documents and XML Forms (News).
We use light framework.

Hi
You need to change PCD Permission for the objects the anonymous used.
And change the parametrer Authentication Scheme to Anonymous.
Good Luck
Eduardo Grilo

User can't access detail Hardware/Software Inventory

What right or permission do I need to give so that a user can access the detailed Hardware/Software inventory of a computer? I don't want them to be able to add or modify computer properties.
It's currently grayed out for the user.
Jim

jwebb,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

User can't access camera anymore, root still can [SOLVED]

since the last udev update, i can't access my camera anymore as user. gtkam gives this error:
An error occurred in the io-library ('Could not find the requested device on the USB port'): Could not find USB device (class 0x6, subclass 0x1, protocol 0x1). Make sure this device is connected to the computer.
the camera is a canon A75, vendor 04a9, product ID 305b. lsusb says it's connected to Bus 001 Device 011. i added that info to a custom 010.udev.rules file, but i don't know where to add the USB info. :?: user is in the camera group, btw.
ACTION=="add", SYSFS{idVendor}=="04a9", SYSFS{idProduct}=="305b", RUN+="/bin/chmod o-rwx $env{DEVICE}"
ACTION=="add", SYSFS{idVendor}=="04a9", SYSFS{idProduct}=="305b", RUN+="/bin/chgrp users $env{DEVICE}"
ACTION=="add", SYSFS{idVendor}=="04a9", SYSFS{idProduct}=="305b", RUN+="/bin/chmod g+rw $env{DEVICE}", OPTIONS="last_rule"
thanks for any help.
>>edit: turns out root can't access the photos, either. the camera is detected and the photos load and show up in gtkam, but when i try to save them i get an error, e.g., "Problem getting 'IMG_0332.JPG' from folder '/store_00010001/DCIM/103CANON'." wtf? :?:
>>edit2: okay, i got it by adding
SYSFS{idVendor}=="04a9", SYSFS{idProduct}=="305b", GROUP:="camera"
to a 00.gphoto.udev.rules file and restarting udev (i never noticed b4, but no script? i had to kill udevd and do /usr/sbin/udevd -d).
is that just a kluge fix though? i don't know anything about udev to know if that's the best way to do it, or if there's a better, more "correct" way. i just want to be able to access the camera from now on without having to change rules or mess around with udev anymore (i thought the point of udev was to have transparency to the user? ). thanks.
>> edit again: i love having conversations with myself.
okay, i didn't even notice the gphoto.rules file bfore, but i just added the information for my camera to the file, restarted udev, and it seems to work. if the maintainer wants to add the info for canon A75 to the file, the line is:
ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="305b", GROUP="camera"

lanrat wrote:
Nice conversation :-)
If your camera isn't already in gphoto.rules you should report it to package maintainer (feature request) and/or gphoto devs.
I wouldn't modify standard gphoto.rules. I'd rather put this rule in /etc/udev/rules.d/00.udev.rules:
ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="305b", GROUP:="camera"
to avoid overwriting after next update.
For restarting udev there is /etc/start_udev (or udev_start or something like this - I can't remember it :-))
thanks, it is /etc/start_udev - i was looking in /etc/rc.d.
i moved it back to 00.gphoto.rules so it won't get overwritten.
now that it's verified working in the standard rules, i'll make a report to the devs to add the cam there.
is your method for doing this in the wiki? i pretty much only figured out how to do it by reading your posts. if you have time, i think it would be a great wiki item. 8)

2nd user can't access internet

I set up a 2nd user account on my Mac and I can't access the internet from it. I've checked my Network settings and it says everything is working normal.

These were written for Yosemite, but apply to 10.6 also.
Internet – can’t connect - Yosemite
Internet – can’t connect - Yosemite (2)

User can't access interactive planning screen

Similar Messages

Maybe you are looking for