User can't log in / Server can't create new users

I recently updated to OS X Server 10.5.5. Now one of my users can't log in. Wrong username or password the system says. I've reset the password but it doesn't help.
When creating a new user I get this error:
"The server reported the error '-14120' while trying to create the user."
How can I fix this?

Well, to move the stuff, make a New Account, log into a different admin account & get BatchMod, it's much better/easier than the Finder for recursive Permission changes...
http://www.lagentesoft.com/batchmod/index.html
Now careful with BatchMod, it's crazy powerful, but easier than Command Line.
Oh, this bad user isn't using FileVault I hope???
OK, once BatchMod is loaded, you can drag the whole bad user's folder to it's icon and set the Ownership/permissions to the new replacement user, check Apply to Enclosed items, go.
Oh, if you have room you might make a copy of that User's folder first & use the copy.
Then open the bad User's folder, Select All, drag to new replacement User's folder.

Similar Messages

Create new user for Essbase Integration Services

Hi,I have two users witch creates olap models and metaoutlines.So I would like to create new user at Essbase Integration Services. How to create new user at Essbase Integration Services level?My system:Essbase Server 6.5.1Essbase Integraion Services 6.5.1Essbase Administration Services 6.5.1Thanks,Grofaty

A user at EIS level is actually a user set up on the relational catalog where your olap models/metaoutlines are stored. For instance if you got to the OLAP model properties dialog and the General tab you can see the owner here is the user you use to connect to your catalog. You can also prevent other users from accessing models not owned by them by setting the security option from the drop-down list on this tab.Mark Rixon www.analitica.co.uk

Ess error & unable to create new user

hi gurus...
i new to portal and i m facing problem in ess and user creation ...
1 .) my ess is showing the following error
Service cannot be reached
What has happened?
URL http://wind:8000/webdynpro/dispatcher/sap.com/pcui_gp~xssutils/XssMenu call was terminated because the corresponding service is not available.
Note
The termination occurred in system EC1 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:wind_EC1_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
2) In user management .. when i m clicking on create new user tab... it shows an error and says "An error occurred; contact your system administrator " while i m the admin here and having all the right with me.
pls help me regarding this....

Hi,
Did you install pcui_gp sca file suring deployment of ESS/MSS business package.?I think that sca file is missing
1 .) my ess is showing the following error
Service cannot be reached
What has happened?
URL http://wind:8000/webdynpro/dispatcher/sap.com/pcui_gp~xssutils/XssMenu call was terminated because the corresponding service is not available.
2) In user management .. when i m clicking on create new user tab... it shows an error and says "An error occurred; contact your system administrator " while i m the admin here and having all the right with me.
Is data dource configured to ABAP? then create in abap system such that users will be visible into portal.
Regards,
Koti Reddy

Create new user same as a existing roles and Privileges

Hi Team,
I am a junior DBA. New user Joined in Application team. So, Client requested me.....
Crerate new user with same privileges as like as existing user.
As of now i am creating user like "create user username identified by "password". Then grant privileges to that user. earliar I never comapare or copied users.
Please suggest any one how to create new user as like as existing user roles and privileges.
Thanks,
Venkat

For basic cloning:
select dbms_metadata.get_ddl('USER', '...') FROM DUAL;
SELECT DBMS_METADATA.GET_GRANTED_DDL('ROLE_GRANT','...') FROM DUAL;
SELECT DBMS_METADATA.GET_GRANTED_DDL('SYSTEM_GRANT','...') FROM DUAL;
SELECT DBMS_METADATA.GET_GRANTED_DDL('OBJECT_GRANT','...') FROM DUAL;
SELECT DBMS_METADATA.GET_granted_DDL(‘TABLESPACE_QUOTA’, ‘...’) FROM dual;
Then just replace the username with the new one you want to create.

Can't create new users in Administration Services Console

Hi,
I am following directions in the Essbase DBA guide for creating new users, as it says you must create a partition user to work with Samppart and Sampeast applications. It tells me to log on to Administration Services Console, go to the Administration Server, and right-click on users to create a new user. However, when I right-click, the option to Create New User is light grey and not clickable, neither is the option to refresh users. Can anyone tell me why I can't create a new user? I am logged in with the username: admin password: password that I set during configuration and that should be the Administrative account.

Hi,
What version are you using? If it is 9 then you need to create the user in shared services. I just checked and the option to create a user is greyed out for me too and I am an admin.
It sounds like you haven't externalised the users which is why the option to do a refresh is not there.
Thanks,
Nathan

Can't create new users after GroupWise is moved from NetWare to Linux

Hi,
I moved GroupWise (Version 6.5 SP 6, single domain and single office)
from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
GroupWise server is running oaky. Existing users are able to connect
their mail box and send and receive messages. But I can't create new
users on the GroupWise server.
I used ConsoleOne installed on the Linux server to create new GroupWise
users. It seemed that I was able to do it. The new users appear on the
NDS and the GroupWise File IDs were assigned for these users. And I was
able to add these new users to distribution lists. But the users DB
files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
server and they cannot connect to the server. Old users cannot find them
in Novell GroupWise Address book.
Does anyone how to fix the problem?
Thanks in advance!
Jinkang

Hi,
[email protected] wrote:
>
> Hi,
>
> I moved GroupWise (Version 6.5 SP 6, single domain and single office)
> from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
> GroupWise server is running oaky. Existing users are able to connect
> their mail box and send and receive messages. But I can't create new
> users on the GroupWise server.
>
> I used ConsoleOne installed on the Linux server to create new GroupWise
> users. It seemed that I was able to do it. The new users appear on the
> NDS and the GroupWise File IDs were assigned for these users. And I was
> able to add these new users to distribution lists. But the users DB
> files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
> server and they cannot connect to the server. Old users cannot find them
> in Novell GroupWise Address book.
>
> Does anyone how to fix the problem?
This clearly sounds like your domain (which is the part of groupwise
which you admin against) doesn't/can't talk to the postoffice, so the
change you made (to the domain) does never get to the PO (which is where
the addressbook of your other users come from, and is what is
responsible for creating the user DB). This seems very likely to be
caused by your move not being done properly, and old information (either
path or IP address) for the PO still being in the domain and/or domain
database.
So how's the domain linked to the PO?
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

How can I set BPEL server enviorment and create BPEL domain?

Without use the http console, how can I set BPEL server enviorment and create BPEL domain?
When I try to use API like below
import com.oracle.bpel.client.Server;
Server s = new Server(ServerAuthFactory.authenticate("oracle","localhost"));
But I always got four exceptions and one warning like below:
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\ejb.properties (The system cannot find the path specified)
Warning: unable to read transaction.interoperability config property
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.lang.Exception: Failed to create "ejb/collaxa/system/ServerBean" bean; exception reported is: "javax.naming.CommunicationException: Can't find SerialContextProvider
Is it right to use com.oracle.bpel.client.Server like this, please help me.
Best regards,
Vita

Anyone can help me? Because I need deploy BPEL process on production server, so I need the Java funtion to create domain. Thank you very much if you can tell me the correct method of using com.oracle.bpel.client.Server API.

If you can't 'Create new user account' - try this!

Over the last few days I've wasted many hours trying unsuccessfully to create a new user account so I can post to Apple Discussions. Kept going round an endless loop, back to the 'Create New User Account' form. Tried every possible solution I found through internet searches, to no avail.
The answer, for me, turned out to be simply choosing a different alias - one that nobody else was using, presumably.
Why, oh why, isn't there an error message that tells you this? It would have saved me so much time and frustration - and many other people too, I'm sure.

Welcome, finally, to Discussions - you are not the first to complain about this, if you like, you can go to app.com/feedback and register your complain there as well.

Visual Adminstrator: can not create new users

Hi,
I've got a problem with my "Sneak Preview SAP NetWeaver 04 - Full Java Edition with Web AS Java 6.40, MaxDB, and Developer Studio" (NW04 SP15) installation. Whenever I start the visual administrator I can not create a new user. All buttons excepting the Refresh Button are disabled.
If I use the web (http://..../useradmin) I can create new users.
Now I want to change Security Policies in the Visual Administrator. But the problem is the same.
Does anyone know any solution?
Best Regards,
tobi

Hi Tobias,
In VA => Security Provider there is a change button ("pencil") in the top of the right frame. You should enable other buttons by clicking this one.
Regards,
Mike

I created new users on my mac and my music, photos, etc. is still on the administrators account. How can I share them with all users?

I created new users on my mac and my music, photos, etc. are all still on the administrators account. I tried making the other 2 new accounts administrators but that didn't work. How can I share them with all users?

Read "iTunes: Setting up Home Sharing on your computer."

How can I log in to iTunes on my new iPhone if I forgot the answers to my security questions

How can I log in to iTunes on my new iPhone if I forgot the answers to my security questions? I set it up years ago

Click here for information. If you can't get the answers emailed to you for some reason, contact the iTunes Store staff via the link in that article.
(77287)

My apple ID and password is valid, but appstore says "anmelden nicht möglich"/can't log in. what can it be?

hi all,
my apple ID and password is valid, but appstore says "anmelden nicht möglich"/can't log in. what can it be?
thanks
matthias

I have exactly the same problem. It said I have to reset the password, which is annoying but fine, whatever. However, it won't send me the e-mail I need to do that! I tried a seperate account with my gmail address and the e-mail is sent instantaniously, but my ipns account (the one I really need) isn't recieving any e-mails from Apple at all. I've tried sending it 4 times. Other message boards suggest reinstalling everything, but I really don't want to have to do that, especially since all I want to do is purchase Mountain Lion which requires such actions in itself. Any help would be appreciated. Thanks,
-Sam

Mountain Lion has created new user log-ins and moved old Users to a separate folder

Mountain Lion has created new user log-ins and moved old Users to a separate folder.
The new users are set-up as "standard" and the old ones were "Administrators"
All files are missing, i.e. no desktop files etc. But they are located in a folder called "Users 1" which is a new folder.
Can anyone help?

Here is perhaps the solution :
http://forums.macrumors.com/showthread.php?t=1191262
follow the "Ratatapa's" instructions.
1/ boot on Recovery part (command R)
2/ find "terminal" in disk utilities
and write "resetpassword" for root. Enter a new password for the root user.
3/ reboot as root user (or when your are login, log out and typing to open a other user "root")
in the "system pref" panel, open "users and groups" and then create new user with the same name, same password.. normally it must be asking you about "You are already an account with the same name" say yes. And it's done.
4/ Log out. re-log as the normal user. desactivated the root user.
about "root user", see also :
http://support.apple.com/kb/ht1528
your welcome
f

HOW CAN I KNOW THE FUNCTION CODE OF CREATE NEW SESSION

HOW CAN I KNOW THE FUNCTION CODE OF CREATE NEW SESSION?
THANKS...

Hi
Please put a "/n" (to open a new session after killing the current session)
or "/o" (to open a new session without killing the current session)
or "/i" (to end the current session) before the below T Codes as per your requirement...
Try thistoo O0
demo-like programs
RSIMC000
RSIMC001
RSIMC002
RSIMC003
RSIMCTRX
RSIMCTST
Reward all helpfull answers
Regards
Pavan

Creating new user in enterprise portal 7 .0

Hi,
I have installed enterprise portal 7.0 and backend is ECC 6.0 on windows 2003.i have logged with J2EE_ADMIN user.when i am trying to create new user in EP7.0 ,i got this problem.(an error occured,contact system administrator).please help me.

Hi,
Go to http://<server>:5<instance no>00
Click on User Management. After login, go to Configuration tab and there you can check.
Thanks
Sunny

User can't log in / Server can't create new users

Similar Messages

Maybe you are looking for