User creation from existing SU01 user

Hi All
While creating a user from an existing Su01 user, i am getting the follwoing error:
'Action is not possible, HR/ALE distribution active'
Could someone help me with this ?
Regards

Hi,
We are facing same issue " HR/ALE distribution is active. Distribute the user information newly".
But in our case we have HR integration is there since all HR master coming from HR system. Now this is strange because we are facing this issue only for one user. Rests of the users are ok.
I think in our case we can not change the status of PBPHR as off.
Is there any other opinion on this?
Thanks,
SRM

Similar Messages

Error message in creating EBP users from existing SU01 users

I am getting the following error messages when i try to create EBP users from existing SU01 users using users_gen: Error during creation of user: User not created or error(s) occurred during user creation. ``Central person`` already exists for user (BBPU_MESSAGES 042). Pls what does it mean and how do i solve this?

Babalola-
The message is indicating that the user you are attempting to create was previously created in the EBP system.
First I would try to correct the user via users_gen using the "check users" option. This may repair the user, but if the user has lost the association to the org then you will need to take some manual steps to re-establish the links for the user in the org details.
If this doesn't correct it, then use transaction PP01 to correct/verify the following relationships for the user. Start with the org unit and work your way down looking for the broken link/s.
Here are the required relationships for the objects:
ORG UNIT:
Relationship     Object
B 003          Position(of user)
POSITION:
Relationship     Object
A 003          Org Unit
A 008          Central Person (of user)
A 008          User
CENTRAL PERSON:
Relationship     Object
B 008          Position
B 207          Business Partner
B 208          User
USER:
NONE
BUSINESS PARTNER:
NONE
Hope this helps you.
b

Automatic PO creation from PR with no master data

Dear gurus,
Is it possible to run ME59- Auto PO creation from approved PR with no master data/source assigned/PIR? Assuming user create adhoc PR.
Is it possible to run this process successfully if i didn't meet on the criteria below? let say no.1 is not checked?
1.Material Master purchasing view, check automatic PO check box.
2. Vendor Master purchasing view, check automatic PO check box.
3. Maintain Source list for Vendor and Material (transaction ME01) and also see validity period.
4. Maintain Purchase Info Record (transaction ME11), check info record category (must be standard or pipeline or subcontracting)
5. Create a Purchase Requisition ( transaction ME51N), during creation select check box of Source Determination.
6. Use transaction ME59 and execute for purchase requisition for vendor, you will be able to create automatic PO.
Thanks in advance.

Hi,
yes all point should be checked
check following link
[http://www.sap-img.com/materials/steps-to-create-auto-po.htm]
Regards
Kailas Ugale

Item category determination during Purchase Requisition creation from APO

Im creating a SNP Purchase Requisition in APO and when it is published to R/3, a Purchase Requisition document is created in R/3.
When this PR is created in R/3, I want the Item Category to be determined based on the Material master Special Procurement Type. ( eg: Id like the Item category to be L if the Material master Special Procurement Type = 30 (Subcontracting) ). But by standard, this field is coming as Blank and this field could only be populated during the creation from APO.
I found a user exit ( CIFPUR02 : Enhancement of Purchase Order Interface (Inbound) ) on R/3 where I tried to populate the Item Category, but when I do this, all the purchase order related data is getting deleted and hence no PRs are getting created in R/3.
Could anyone please tell me if this could be resolved using configuration and if not any tips to do this technically would be very helpful.
Thanks,
Harsha

Hi Karun,
This is the code i'm using...
select single * from marc into lit_marc
where matnr = c_eban-matnr
and    werks = c_eban-werks.
append lit_marc.
read table lit_marc with key matnr = c_eban-matnr
                             werks = c_eban-werks
                             sobsl = 30.
if sy-subrc = 0.
c_eban-pstyp = '3'.
endif.
Here sobsl = 30 is the Special procurement type
But when i try to populate c_eban-pstyp = '3', during the creation of Purchase Requisitions in R/3, in the program SAPLEMPI -> LMEPIF01
this condition is encountered which deletes all the data in the tables that is used to create Purchase requisitions.
<i>* get rsnum in the case of subcontracting
      IF XEBAN-PSTYP EQ PSTYP-LOHN AND                      "RB240999
         EXITFLAG_ORDID IS INITIAL.                         "RB240999
refresh all component tables
        CALL FUNCTION 'ME_COMPONENTS_REFRESH'
             EXCEPTIONS
                  OTHERS = 1.</i>
Could you please suggest me anything to get around this.
Thanks,
Harsha

Auto PO creation from PR through ME58 problem.

Hi experts.
We are providing facility to our client auto po creation from PR through Me58 transaction code.
I am facing amazing problem is that it is working fine in development client , not working in Quality and Production client , exactly problem is that ME58 u2013 Ordering Assigned Purchase requisition & Process Assignment Create PO , Purchase order cannot be created, PR shift in document overview , it means user want to drag and drop in purchase order then system create PO , this problem I am facing in Quality & Production , but it is working fine in development server there is no need to drag and drop , immediately after Process assignment Create PO , system directly convert PR into PO just only need to check and save PO. I compare everything with development & quality data including material master , source list and everything still I am unable to understand where is the problem , is there any customization settings related to auto po ? pls. suggest any solution to solve this issue.
Kumar

Hi,
Config setting.
Settings for Automatic PO creation is:
1. Select the Automatic PO check box/option in Purchasing view of material master
2. Select the Automatic PO option in the purchasing data view of Vendor master
3. Maintain Purchase info record
4. ME56- Assign the vendors to PR's
5. ME58- Create PO via assignment list(PR-> PO)
6. ME57- Assign and process PR's
7. ME59N - Create PO automatically via PR
Above step by step procedure is involved in the Automatic PO creation.
SAM

PO creation from Accepted bid

Hi All
We are on SRM 7.0 classic scenario.
Trying to create a local PO from an accepted bid in Plan driven scenario
1) Is there a way to alter the quantity in the PO, or create partial PO's from 2 or more accepted bids.
I didn't see any way to do this as the PO is instantaneously triggered & no option to change
2) The scales and Pricing conditions entered by the supplier in the bid , are not transferred to the PO?
Only the final Price calculated , based on the conditions is transferred? Is there a way to transfer the conditions and scales too?
3) The bidder can enter the validity dates in the Price conditions. However what is the effect of those? If the buyer tries to create a PO from the accepted bid, beyond the validity date, is there a hard stop error?
Is there any other place at Header level, where the bidder can specify the validity date for the bid, except the conditions?
Thanks
Kedar

https://wiki.sdn.sap.com/wiki/display/ESpackages/Service+Procurement
Please check with SAP via OSS message refering the same.
sorry i could not help you
What is the item type (category) ? in the Material works fine but service not works?
dont hesitate to create a new thread for geting quick reply.
Check your back end docuemnt type PO too.(Item category- D)
Service PO item has different layout of Purchase order than material. you may require to map accordingly.
Note 1268336 - Synchronous peer-to peer Services Configuration
Any clues
Note 1270144 - Backend PO tracking in RFX & Classic Scenario SC BE PO fix
1.Backend PO number not getting displayed in RFX tracking during PO creation from winning quote through Enterprise services.
2.Classic Scenario : SC with services created in SRM with supplier details, does not create a follow on PO in the backend system returning an error in process status on the User interface.
Other terms
Enterprise services,SOA,BID,RFX tracking,winning quote,quote,Back End PO ,classic scenario,services,error in process
Reason and Prerequisites
Programming error.
Prerequisite:
For RFX tracking:
Backend PO creation successful from winning quote through enterprise services.
Solution
Import the support package or implement the attached advance correction manually

How to invoke ADF custom application from existing R12 EBS application

Hi Guru's,
We have a requirement to invoke ADF custom application from existing EBS R12.1.3 application.
Is there any documentation provided by ORACLE or any online help on how to integrate/invoke ADF pages from existing EBS application?
And can we pass any EBS session level parameters like(user info, language, operating unit etc) to ADF layer while invoking the ADF application?
I have thoroughly searched the forums and got some info related to JAAS security links and all. but i am looking for exact integration specific steps.
Any help in this regard is a great help!!
Thanks alot for your help!!
Subba.

lets raise your question over here
JDeveloper and ADF
Thanks
vamshi.

Save text in a PO during creation from APO

Hi All,
I need to save SO text in PO during PO creation from APO.
I am using the BADI ME_PROCESS_PO_CUST method:PROCESS_ITEM.
This works perfectly when PO created from ECC - ME21N. However when a PO is created from APO (by converting PR) this BADI did not trigger or works.
Then I have tried using Purchase order CIF user exit CIFPUR02 ->EXIT_SAPLCPUR_001->ZXCIFU06
It didnot brings in the purchase order number to be created. Hence I could not able to copy the sales order text to purchase order.
Kindly let me know the user exit or BADI triggers during PO creation from APO to copy sales order text to purchase order.
Thanks,
Senthil Kumar

Hi,
Use this.
ME_PURCHDOC_POSTED
Regards,
Shamma

How to create BP from existing vendors optionally?

Hi,
how can I create RE business partners from existing vendors for some optional vendors only?
Does the vendor synchronization (Cross-Application Components - Master Data Synchronization - Customer/Vendor Integration) mean that a BP is created for each vendor in the specific account group?
I've tried to define the configuration settings but haven't found the solution for this yet. Please advise.
- BP grouping assigned to number range
- one FI account group is assigned to BP grouping
- BP role (BP role category, BP view) defined
- in Vendor role link, is the assignment of Role category "optional"?
Thanks!

Hi,
thanks for your comment. I need to check this option too.
However, in this case this does not seem like the best option regarding the workload of users. If they have already xxx vendors in FICO, it does not seem like a very efficient way to create those first also as BP, and then link these records.
It would be much easier to only create the BP based on vendor data with FLBPC1, and save the double work.
Based on SAP documentation, I've understood that FLBPC1 Create BP from vendor is meant for this purpose, so I would like to use this option.
Please advise. Has anyone used FLBPC1 Create BP from vendor successfully?
Thanks!

Extract Tag Tree from existing PDF

Hello,
We are starting a new project where a user can accessibility check their pdf. They do this by uploading the pdf file and on a new screen we are supposed to show if the tag tree of the pdf (if it has tags).
Can the tag tree from an existing pdf be extracted on the server by running some command line code in the background or by calling a method in the .NET SDK? Anyone have any ideas.
If this isn't possible does anyone know of any other software programs that I might use in order to get this information. As long as I can get the tag tree I shouldn't have any problem marking it up into HTML and rendering it to the person's browser.
Thanks,
Dustin Michaels

Are you sure you can't install it on a windows server? This links says you can.
http://www.adobe.com/products/acrobatpro/productinfo/systemreqs/Re: Extract Tag Tree from existing PDF
Microsoft® Windows® 2000 with Service Pack 4; Windows Server® 2003 (32-bit or 64-bit editions) with Service Pack 1; Windows XP Professional, Home, Tablet PC, or 64-bit Editions with Service Pack 2; or Windows Vista™ Home Basic, Home Premium, Ultimate, Business, or Enterprise (32-bit or 64-bit editions).
Anyway even if you couldn't install it on a server we could always have it installed on a Windows XP machine and have the windows server contact the Windows XP machine to get the tag tree from the pdf uploaded.
Do you have any idea how you might extract the tag tree regardless of what operating system adobe acrobat is running on using some .NET code?
Thanks,
Dustin Michaels

Create a new schema from existing schema

Hi, I'm wondering whether there is a way of create a schema from
existing one? Could it done through SQL statement or have to go
through some sort of tools? Please drop me a few words if you
know the answer. Thanks.

Hi,
U can do that in a few steps.
First create the User.
Then Go to the Source User and grant him create any table privs.
Then write a Sql Stmt to generate the necessary scripts and run it.
The other way would be to grantr the newuser select on all the tables and then run that script from his account.
Regards,
Ganesh R

Calling another ITS service from existing ITS service

Hi to Everyone,
I would like your advice on calling another ITS service from existing ITS service.
From my current ITS service eg. "Z_TESTA", i wish to call another ITS service "Z_TESTB". The problem is that it always prompt for userid and password when i called the 2nd ITS service. However, user already enter the password & id when they login to the 1st ITS service. Is there a way to call this new ITS service w/o the userid & password prompt again?
Below is the codes that we used to call the new ITS service:
(a) "http://.../scripts/wgate/webgui/!?~transaction=z_testb"
OR
(b) "http://.../scripts/wgate/z_testb/!"
We used both method (a) and (b) but same outcome. Thank you in advance!
YanaJ

Hi YanaJ,
in order to skip a manual login you have to have the credentials somewhere. If you disabled cookies, what I told you will not work. Another possibility would the usage of X509 client certificates. But this requires that you have a setup that distributes the certificates of all of your users. I personally nether setup such scenario. Maybe someone other can explain what you have to do.
Best regards,
Klaus

Excise Assesable Value from Existing excise Invoices In Subcontracting

Dear All,
My requirement is that during Subcontracting Challan creation System should pick assesable value of material from existing excise Invoices & not from Assesable Value maintained in J1id.
I have done all subcontracting related configurations. I am not maintaining assesable value in J1id.
Now while creating subcontracting challan system is not showing existing excise invoices when i click excise Invoice tab & passing a warning msg that assesable value of material is Zero.
Is it a bug or lack in configuration? Need experts advice.
Thanks
Nitesh

Hi,
You have to always maintain assessable value of the components to be supplied to subcontracting vendor in J1ID and also excise rates for the chapter ids are linked with these components. So, in J1IF01, system will take assessable value as excise value base value and calculate excise duty based on tax invoice, as per my knowledge it cannot be linked with existing tax invoice.

Creating Activity Diagram from existing code in 11g

Hi,
How can I create activity diagram for an existing application in 11.1.2.2.0 version?
-Infy

Do you mean you select activity diagram in wizard but you see classes (not invocations/partitions etc) on created diagram?
If so.. it's a design, you just see activity diagram with inappropriate elemnts.
We support to create any diagram from any elemnts but may be it's better to block diagram creation from not appliable elemnts.

POWL creation from Query

Hi,
I had created a query using SQ01. Now i want to create the POWL from this query and from the existing queries.
Is there any document to create it.
Anurodh

hi,
Use the below link. It has the document for POWL creation from Infoset query:
[Powl from Infoset Qery|http://help.sap.com/bp_ekit604/BBLibrary/Documentation/k52_How_to_Guide_EN_DE.doc]
Regards,
MAdhu

User creation from existing SU01 user

Similar Messages

Maybe you are looking for