User exit in CO11N ,goods movement specific component can split for batch
Hi experts
When system going to production confirmation by CO11N . now user go to goods movement button , here i want to know user exit,here component line item is batch active or not so i can allow or validate . at that time if component is batch active then user can split qty batch wise else validate (you can not change & exit).
Much regards .
Anup shukla
Check these BADIs:
MB_RESERVATION_BADI MB21/MB22: Check and Complete Dialog Data
MB_QUAN_CHECK_BADI BAdI: Item Data at Time of Quantity Check
MB_PHYSINV_INTERNAL Connection: Core Inventory and Retail AddOn
MB_MIGO_ITEM_BADI BAdI in MIGO for Changing Item Data
MB_MIGO_BADI BAdI in MIGO for External Detail Subscreens
MB_DOC_BADI_INTERNAL BAdIs when Creating a Material Document (SAP Internal)
MB_DOCUMENT_UPDATE BADI when updating material document: MSEG and MKPF
MB_DOCUMENT_BADI BAdIs when Creating a Material Document
MB_CIN_MM07MFB7_QTY Proposal of quantity from Excise invoice in GR
MB_CIN_MM07MFB7 BAdI for India Version exit in include MM07MFB7
MB_CIN_LMBMBU04 posting of gr
MB_CHECK_LINE_BADI BAdI: Check Line Before Copying to the Blocking Tables
ARC_MM_MATBEL_WRITE Archive AddOn-Specific Data for MM_MATBEL
ARC_MM_MATBEL_CHECK Check AddOn-Specific Criteria for MM_MATBEL
Rob
Similar Messages
-
User Exit in MB11 / GOODS MOVEMENT +_+_+
Hi experts,
I have a requirement where I need to know the User exit in MB11.
My requirement is such that when a goods mvmt 261 is done using MB11, It should call a special function (custom program) using a Userexit.
Or a general user exit in goods movement if not (MB11 specifically), so that I can trigger this call for special function.
Any info is greatly appreciated.
Thanks
Preeti
MB1C, MB11, Goods movement.Check these BADIs:
MB_RESERVATION_BADI MB21/MB22: Check and Complete Dialog Data
MB_QUAN_CHECK_BADI BAdI: Item Data at Time of Quantity Check
MB_PHYSINV_INTERNAL Connection: Core Inventory and Retail AddOn
MB_MIGO_ITEM_BADI BAdI in MIGO for Changing Item Data
MB_MIGO_BADI BAdI in MIGO for External Detail Subscreens
MB_DOC_BADI_INTERNAL BAdIs when Creating a Material Document (SAP Internal)
MB_DOCUMENT_UPDATE BADI when updating material document: MSEG and MKPF
MB_DOCUMENT_BADI BAdIs when Creating a Material Document
MB_CIN_MM07MFB7_QTY Proposal of quantity from Excise invoice in GR
MB_CIN_MM07MFB7 BAdI for India Version exit in include MM07MFB7
MB_CIN_LMBMBU04 posting of gr
MB_CHECK_LINE_BADI BAdI: Check Line Before Copying to the Blocking Tables
ARC_MM_MATBEL_WRITE Archive AddOn-Specific Data for MM_MATBEL
ARC_MM_MATBEL_CHECK Check AddOn-Specific Criteria for MM_MATBEL
Rob -
User exit or badi to restrict PROO in Sales Order for certain sales organisation
Hi SAP SD experts,
I would like to know the User exit or badi to restrict PROO in Sales Order for certain sales organization. This can be done by making condition type as D but will affect all sales org and we to restrict for a certain sales org only.
thanks,
SGKindly explained how you have solved others may benefit..
regards
Arunkumar -
User exit, badi or enhancement to validate data before saving for qm02
Hi,
Currently, I have a requirement to validate the data of a notification before saving data in Tcode qm02.
I have found an user exit to check data for tcode qm02. It works for task tab, I mean I can get the data under task tab of qm02 and do the validation. However, for the tab processing: I want to validate the partner name before saving but I can not get the list of partners which is in Processing tab.
Please let me know if you could show me the user exit, enhancement, or Badi so that I can validate the data under processing tab in qm02.
Thanks in advance,
Hung ToHi Keshav.T,
Currently I am using this exit to validate data for the tab "Task". However, for the tab "Processing" I can not get the data, let say Partner, to validate.
Thanks,
Hung To -
User exit while doing Goods Issue
Dear Guru's,
I have the below requirement from my client,
They want an warning msg from the system while doing Goods issue, if the stock of certain material is goes below min stock level, so i spoke to my abaper to create user exit, but he is asking for some programs from MM side related MIGO. What programs we need to give him ? is that right ? pls suggest
Edited by: channabasappa kallapur on Jan 21, 2009 5:29 PMI don't believe you need a user exit for this .. USE OMCM and configure the availability check against the appropriate movement type
-
User exit to make 262 movement go to QI rather than unrestricted status?
Hi Gurus,
In our system, we use "rework" production orders to occasionally rework Finished product.
The same finished product code is used (261) and returned (101).
Sometimes a 262 is used to retrieve unused Finished product back from the production order.
However this naturally places it back in unrestricted status.
What I'm being asked to investigate is whether there is anyway using the ABAP user exits
to influence the 262 movement,during the transaction, for certain finished product only,
so that the product ends up in Quality status - this is considered important
to ensure the product is not shipped as it was only released to enter the rework order.
On occasion the 262 is done in error, and in this case it would be especially useful!
Having looked through the material doc user exits, and done a search on the forum,
I don't think this is possible ABAP-wise,SAP intends a 262 to go to unrestricted and that's it..
I'm thinking of instead creating a bespoke authority object, to be checked under the above logic,
so that only certain qualified users will be able to do this operation -
but I want to throw the question out to forum before I resort to that..
Thanks for any help/ideas,
PaulDear Paul,
When the finished goods are found to be defective and needs to be reworked, first move the finished goods to a seperate st location (which is not relevant for MRP planning and not relevant for sales delivery. This by this the defective material is protected from being consumed or delivered).
Then create a rewind production order (or a rework production order) and issue the defective material against the production order and start the rework.
I am thinking what you said is not possible through user exit (there is a BADI MB_DOCUMENT_BEFORE_UPDATE or MB_DOCUMENT_UPDATE for material document movement) but you'll not be able to influence the stock to put in the quality.
Thanks
Nagarajan -
CO11N - goods movements button
At TX CO11N is a button called Goods Movement and i need to know if Ican disable that button? and provide access to a limited group of users.
Thanks in advance!Dear ,
Goto OPK0-Define single entry confirmation screen -Slect the SAP0001 screen -Slecct the Filed and mark it as Display or Hide .
Or create an Screen Variant through SHD0 using the below useful wiki based on user level while doing CO11N-Confrimation posting
http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation
Hope this calrifies
Regards
JH -
The CO11N Goods Movement Overview does not display any materials for BOM
Hello folks;
I can't seem to get a hit when searching for my particular question, which most likely is an easy one for most of you.
A new BOM was set up consiting of individual materials (no sub-assemblies).
After a production order was created (CO01) and released and a reservation was created, the user went to the CO11N transaction to process the first Operation (Issue the components to the Order).
He clicks the "Goods Movement" button and the "Enter production order confirmation: goods movement" screen that displays is blank! There are no components listed with the "261" movement type.
All the other BOM's that we process do not have this problem and their components appear except for this new BOM that was created.
What are we missing?
I'm sure this is an easy question for you folks since I am mainly an ABAP'er with some Logistics config experience.
Thanks in advance.
Scott.Thank you so much. The person who created the Routing did not click on any of the Backflush flags.
I will have them fix the Routing.
Thanks again.
Points awarded. -
EXIT_SAPMM06E_016 for User exit how to prepare functional specification.
Hello Gentlemen,
Ex: - issue for the PO no: 4500006789
Made advance payment against PO 100%, later vendor has given discount on freight charges, so once advance payment is made then system should not allow to amending the PO.
Now client requirements are as follows likeu2026.
Condition no1: If there is an existing down payment against the PO then system should allow to amending the PO, but system should throw the warning message as there is already down payment against the PO.
Condition no2: If there is an existing down payment against the PO system should allow to amending the PO, but system should not allow to changing more than the total value of the PO.
So User exit which I have mentioned in above subject line it should be in a position to fullfill the condition no1 and condition no2.
So pleas let me know the functional specification and functional specification logic for above said in subject User exit.
Early action inthis matter will be highly appreciated.as far as i know, when you make an advance payment you can link it to a po only thru a reference text field.
uncleared vendor items will be table BSIK
you may have to filter it out by transaction type A and spl gl indicator A, both refering to down payment.
this way you can find out what is the advance payment still with the vendor. -
User Exit to add custom field in Component Screen
Hi Friends,
I searched alot but could find exit to add custom field or tab in material component detail screen for SAP 4.7. Please let me know if there is any exit or workaround possible.
Thanks,
RajBADI is available to create custom field in material component , but it is available as of ECC 6.0 EHP3 , not sure about 4.7
-
User exit to update the incompletion log in sales order for pricing error
Hi experts,
I have to check the some mandotory pricing conditions in sales order, if that conditions are not exist in sales order then i need to show the information message as well as i need to update it in incompletion log of sales order. (incopletion log we can see on menu bar 'EDIT' or ctrl+F8 on main screen of VA01). So that user can save the sales order but it will be in incomplete status.
I have completed it upto showing the information message using user exit 'MV45AFZZ', but after this i don't know how to update it in incompletion log of sales order for pricing. I tried to update in tables VBUK-UVPRS, but i am not getting the desired result.
Please anyone can tell me how to update it. In which user exit i can update the incompletion log.
Thanks and Regards,
Vicky.Hi Vinod,
I am sending you my code please check it,
if TKOMK-SPART = 10.
if XKOMV is not INITIAL.
clear v_JEXP.
READ TABLE XKOMV with key kschl = 'JEXP'.
if sy-subrc = 0.
check XKOMV-kwert = 0.
message i003(ZT) with 'Value should not be 0 for conditioin type JEXP'.
v_JEXP = 'X'.
else.
message i003(ZT) with 'Maintain the mandatory Conditioin type JEXP'.
v_JEXP = 'X'.
endif.
if v_JEXP = 'X'.
XVBUV-MANDT = sy-mandt.
XVBUV-POSNR = '000010'.
XVBUV-TBNAM = 'VBAP'.
XVBUV-FDNAM = 'PRSOK'.
XVBUV-FEHGR = 20.
XVBUV-STATG = '06'.
XVBUV-FCODE = 'PKON'.
XVBUV-SORTF = 9999.
XVBUV-LFDNR = 0000.
XVBUV-UPDKZ = 'I'.
append XVBUV.
endif.
endif.
endif.
Please suggest something to solve this.
Thanks and Regards,
Vicky. -
i have an older yamaha receiver and projector both without hdmi inputs but component video instead. I would like to get apple tv and start renting movies through iTunes but apple tv only supports hdmi and ive read that iTunes has codes to prevent the use ot analog cables with movies. Is there a way to adapt hdmi to component video for both apple tv and iTunes easily?
Yes, HDMI is the only supported method. Also, with converters you will run into issues with HDCP (which will prevent you from streaming DRM content from iTunes etc) as well as resolution.
-
Do the movies that you can buy for ipad have subtitles for the hard of hearing?
Do the movies you buy on iTunes have subtitles for the hard of hearing ?
Tap bubble on bottom right for audio and sub-title (tap to enlarge image)
-
Hi,
I don't capture user-exits when press Goods Movements (sy-ucomm = MB03) and Save buttons in transaction CO11N.
I use the following user-exit:
FUNCTION EXIT_SAPLCORF_102 >>> Include ZXCOFU12
Can you help me please.
Screen Image: http://i53.tinypic.com/2ef2rtv.jpg
Best Regards.Im not creating blank message
i use the a term but the problem is, when i first hit save button and see the error message,than i hit enter button to pass the message and make the input fields editable again. But sy-ucomm is still equal to BU so it show the message again and again and i cant return to normal input screen. And if i make the message type 'S' i cant block the saving process.
I have to option first i will use type E message but i have to get over the problem above, or i will use type 'S' message but i have to stop the transaction after this message. I used type E like S or type S like E. They didnt work. -
Goods Movement user-exit - message capable
I am searching for a user-exit during goods movement. I have found several enhancements (MCBF*) but none of them allow me to set an error message if a specific condition exists. None of the enhancements contain a message-id statement.
I want to test the goods movement before it is posted for a condition and if true, display an error message and thereby prevent the goods movement from happening.
Thanks for the help.
Maggie<i>None of the enhancements contain a message-id statement.</i>
Remember, you need not have the message class defined using the message-id statement. You can write the message as.....
MESSAGE E001<b>(00)</b> with 'The message Text'.
Here you are specifying the message class 00 in parenthesis.
Regards,
Rich Heilman
Maybe you are looking for
-
Installed the new iTunes 11.1.4.62 and now my iPod is not recognized by iTunes
Seems to be lots of people on here with the same issue. It would be nice if Apple were to advise users of iTunes that there is an issue with iPod syncing so we all don't run around wasting our time. Looks to me like in Device Manager under portable d
-
Why can't i access itunes, error messages -50 keeps coming on?
I cannot open itunes on Windows 7, error -50 keeps coming up every time I try to open itunes.
-
Tuning Sudden Increase to Port Traffic
I am looking for suggestions on tuning sudden increase to port traffic for MARS. We have a third party that we do not want to be actively alerted when they perform their scan. This gives us one set of IP addresses they use to scan. Next is our intern
-
Adobe Flash Player 10.1 Not Working
I have spent hours and hours and used a lot of ways trying to solve this issue, but still can't get FP to work . After I update the Flash Player 10.1, everytime when I restart my computer and I go to a website using flash, the website will ask me to
-
Search has incorrect channel numbers
We were just upgraded to the new channel lineup today (Southeastern PA). When I do a search, I notice the channels, particularly for HD still show the old channel numbers. Do you know how I can update to get the new HD channel numberss for the shows