User "manager" need licence?

hi all,
i have licensend a company with 21 Users. After licensing its not possile to open any form with the user "manager" (only choose company). I get the error "you are not licensed to open form 866 rate input". Login works.
installation is 2007A PL30
maybe s.o. can help me?
thanks,
sabine

Hi,
no he have no licence but i understand the manager Account as inegrated support account. issn't he? (its my first implementation ) So i must change the prof. licence from a active user to my Support user? or buy a new one...
thanks for you replay.

Similar Messages

I need user management system in PHP recommendations to work with Flex client side

Hi All,
I have a very big project that involves PHP server side (That i have to develop) and Flex client side. I was wondering it there is a ready made PHP user management system that i can use to provide me:
- user login/logout
- forgot my password functionality
- register (better with captcha)
Does someone can recommend this kind of php system?

Hi, guys
Free and open source PHP User Management Scripts. These scripts provide a solution of creating a membership system of a website.
Some PHP user management scripts listed on PHPKode.com. which you can choose the right php user management to meet your demands!
Hopefully can help you!
Best regards!
Anny

OIM 9.1.0 with Database User Management: Connector Exception upon Connect

Hi,
I've been struggling with the Database User Management connector (9.0.4) with Sybase, following the steps word-for-word as per the documentation (Oracle® Identity Manager Connector Guide for Database User Manage Release 9.0.4; E10425-0; July 2009).
When defining the IT Resource through the Install Connector wizard, I get the following when it does a connection test:
14:51:52,795 ERROR [WEBAPP] Class/Method: CreateITResourceAction/testConnectivityForDataBase/ClassNotFoundException encounter some problems: No ClassLoaders found for: com.sybase.jdbc2.jdbc.SybDriver
java.lang.ClassNotFoundException: No ClassLoaders found for: com.sybase.jdbc2.jdbc.SybDriver
even though I've ensured jconn2.jar is in the ThirdParty directory, reflushed the cache, and restarted OIM; the connector still can't seem to load the driver.
I've tried the database testing script with similar results.
Any thoughts?
Cheers
Simon
PS: I believe v5.5 of JConnect (as required by the OIM Connector) has been EOL'd and Sybase. They recommend you use v6.0 (v6 is jconn3.jar)), which from what I can see should work as com.sybase.jdbc3.jdbc.SybDriver; I tried that as well but had the same ClassNotFoundException.

I've fixed it; needed to copy jconn2.jar into the $JBOSS_HOME/lib directory and restart the server.

OIM - EBusiness User Management Connector

Hello there,
Can anybody please tell me within the Ebusiness connector i.e. provided in 9.1 version connector pack, which one needs to be installed? there are 3 different categories within the same -
1.) For the User Management connector:
Oracle EBS User Management 9.1.0.0
2.) For the User Management with HR Foundation connector:
Oracle EBS HR Foundation User Management 9.1.0.0
3.) For the User Management with TCA Foundation connector:
Oracle EBS TCA Foundation User Management 9.1.0.
I don't know which one resembles to which operations that OIM can perform. Can anybody please throw some light and explain which connector does what?
thanks,
- oidm.

An FND_USER record represents an Oracle E-Business Suite account. This record is the main component of the account data whose management is enabled by the connector. *(Oracle EBS User Management 9.1.0.0)*
Depending on your configuration of the target system, there may be other user data components that must be managed by the connector:
Some applications in Oracle E-Business Suite require a user to have a person record in Oracle E-Business HRMS. *(Oracle EBS HR Foundation User Management 9.1.0.0)*
These users are either full-time employees of the organization or users (such as contract or part-time employees) who have been provided with access that is similar to the access provided to full-time employees. iExpense is an example of an application that requires users to have person (HRMS) records.
Some applications in the Oracle E-Business Suite require a user to have a record in Oracle E-Business TCA. *(Oracle EBS TCA Foundation User Management 9.1.0.)*
Typically, these users are representatives or employees of customers and vendors of your organization. iStore and iProcurement are examples of applications that require users to have TCA records.
For more info
http://download.oracle.com/docs/cd/E11223_01/doc.910/e11203/intro.htm#CHDJCHDC
Thanks
Suren

Database User Management Connector ,

Hi,
Want some help in understanding the database user management connector to achieve the Requirement -
" Need to do user provisioning to a database according to roles/entitlements assigned to a user and also wants that access to that database is managed according to roles assigned to that users "
My environment is OIM 11g R2 which is integradted with OIA 11.1.1.5.0
Googled and found that Database User mangement Connector is required for his purpose.Please confirm is this understanding correct or is there any better approach.
Also want to know is it mandatory to install bundle on ICF for this connector?
Thanks,
Puneet
Edited by: Puneet Lobana on May 23, 2013 11:55 PM

Hi one more silly doubt.....can i connect to oracle database without using a connector but creating an IT Resource Type, IT Resource, RO,PD - adapters using stored procedure task to call a stored procedure on the target database?
Pls help
Regards,
sk
Edited by: sk on 19/08/2010 22:15

Using Jackrabbit User Manager programmatically for changing passwords and getting user data.

I am trying to do a change password request using the Jackrabbit User Manager with the REST URL /system/userManager/user/<username>.changePassword.json. The problem I am having is that this request requires an oldPwd form param in the request. The issue is that when I am trying to do this request it is in response to the user selecting "Forgot Password" so our logic has created a random password which we then email to the user so they can use that the next time they want to login. We need to change that user's password in CRX so they can log in using it next time. Since they haven't logged in there is no session, NOT the problem. THE PROBLEMS, I don't know 1. how to use the userManager to get that user's old password, since /system/userManager/user/<username>.json doesn't appear to return the password and 2. if I could get the old password it most certainly will be encoded, some how, so I will need some decoding algorithm to pass it through in order to get the actual password to set as the oldPwd form param to my change password request. Please let me know if you require any further explanation. Any assistance would be greatly appreciated. Thank you, in advance, for your assistance.
Sincerely,
Mike Sucena
[email protected]

Hi Mike,
msucena wrote:
Justin:
Does your response mean that until version 2.1.2 of Jackrabbit User Manager is released I cannot change the password without knowing the old password?
No. It means that this feature is not available in version 2.1.0 of the Sling Jackrabbit User Manager bundle. It was added after that release. You have a number of options:
Build the bundle from source.
Use one of the SNAPSHOT bundles available from the Apache Snapshots repository.
Use the release which is being voted upon now (https://repository.apache.org/content/repositories/orgapachesling-175/org/apache/sling/org .apache.sling.jcr.jackrabbit.usermanager/2.2.0/). (Note - we decided to use 2.2.0 as the version number rather than 2.1.2 as originally planned due to the scope of this release).
Write a different servlet which performs the same actions.
Meaning that being able to use either the credentials of the "Admin" user or using the credentials of a member of the "UserAdmin" group is not supported in the current released version 2.1.0?
Correct. It was added after the 2.1.0 release.
If I currently need the old password is there any Sling REST - Jackrabbit API call I can use in order to get the old password since using /system/userManager/user/<username>.json doesn't appear to return the password?
-Mike
The plain text password is not stored. And this should be considered a good thing.
If you have questions about the development process we follow in Sling (or at Apache as a whole), by all means ask on the Sling users mailing list. It is reasonably well-established and we love to talk about it.

Adding a domain user to the admin role within the local user management breaks all metro apps for all users!!

Hi,
I have posted this in another large thread under the "Windows 8 General" group but have not had any appropriate feedback from MS.
After hours of testing and working with other users I have managed to isolate a simple situation that breaks all metro ui applications within Windows 8 for all users on the machine. Here are my exact steps and notes.
Before continuing if you are running Avast then your solution may be to turn of the behaviour shield functionality as this also breaks metro apps. This is NOT the problem we are having!
I have performed 3 cleans installs after isolating the problem and am able to reproduce the issue every time using the same steps on two different machines.
First thing to say is that for us it has nothing to do with simply joining the domain, domain/group policies nor does it appear to have anything to do with the software we installed, the problem here is much more simple but the result is pretty terrible.
Here are my exact steps of what I did to reproduce our problem:
Complete format of HDD in preperation for a clean install
Clean install performed
Set up the machine initially with a local account
Test metro apps - all working fine
Open control panel from the desktop, click on System, change the system to join the domain, click reboot
Log into the system using my domain account
Test metro apps - all working fine
Here's were the problem starts. I need my domain account to have admin rights on the local machine so I can install programs without the IT men having to come over and enter their password every 5 mins.
I go to control panel via the desktop and click on User Accounts. From with here I then click on "Manage User Accounts". This requires the IT guys to enter their details to give me access to such functionality. This is fine
In the dialog box that opens I can only see the local user that was initially created during setup. The "Group" for this local account shows as "Administrators" - Image included below (important to note that metro apps are working at this point)
I click add and then add my domain account - also giving it administrator access
Sign off or reboot to ensure the new security is applied
Sign back in to the domain account
Test metro - ALL BROKEN
Sign out
Sign in as local account
Test Metro - NOW ALL BROKEN FOR THIS USER ALSO
So as soon as I add my domain account to the local user accounts and set it as admin it breaks all metro apps for all users. This is on a totally clean install with nothing at all installed other than the OS.
Annoyingly if I go back and change the domain account to a standard user or if I totally remove the domain account from the local account management system the problem does not go away for either user. basically it is now permanently broken. The only fix I
could fathom was a full re install and not giving the domain user admin access to the local machine.
Screen one - this is the local user accounts window AFTER joining the domain and logging in with my domain account (All metro apps working at this point)
Screen 2: User accounts AFTER joining the domain and AFTER adding domain account to local user management (METRO BROKEN)
I have isolated my machine from all group policies so nothing like that is affecting me. Users I have spoken to in different companies have policies that automatically add users to the local user management. This means that metro apps break as
soon as they join the domain which leads them to wrongly think it is group policies causing the error. Once they isolate themselves from this they can reproduce following my steps.
Thanks

Hi Juke,
Thank you for the response and apologies for the delay in getting back to you. My machine was running a long task so I couldn't try your suggested solution.
I had already tried running the registry merge suggested at the top of the thread to no avail. I had not tried deleting the OLE key totally so I did that and the problem still exists. I will post all the errors I see in event viewer below. For
your info, since posting my initial comment I have sent out my steps to 7 different people and we can all reproduce the problem. This comes to 10 different machines (3 of them mine then the other guys) in 3 different businesses / domains. We see the same errors
in event viewer.
Under "Windows Logs" --> "Application" : I get two separate error events the first reads "Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional
information." The second arrives in the log about 15 seconds after the first and reads "App winstore_cw5n1h2txyewy!Windows.Store did not launch within its allotted time."
Under "Windows Logs" --> "System" : I get one error that reads "The server Windows.Store did not register with DCOM within the required timeout."
Under "Applications And Services Logs" --> "Microsoft" --> "Windows" --> "Apps" --> "Microsoft-Windows-TWinUI/Operational" : I get one error that reads "Activation of the app winstore_cw5n1h2txyewy!Windows.Store for the
Windows.Launch contract failed with error: The app didn't start."
If you require any further information just let me know and I will provide as much as I can.
Thanks

NWA or User Management doesn't start

Hello, All !!
I have recently installed a NW 7.0 system. Details listed below:
System: SAP SRM 5.0 SR3
Stacks: ABAP+JAVA - single install
Platform: HP-UX (64-bit)
Database: Oracle
Issue / Problem that's on hand
I am not able to bring up User Management or NWA from the URL:
<http>://<AS_Java_hostname>:<AS_Java_HTTP_port>/nwa
<http>://<AS_Java_hostname>:<AS_Java_HTTP_port>/useradmin
User ID: J2EE_ADMIN
Password: Installation Master Password
Once I enter these details and click on login button, I get back the same blank login screen. If I enter incorrect password, then I get an error: "User Authentication failed".
When I log on to AS ABAP, I see the following users defined:
J2EE_ADMIN
J2EE_GUEST
SAPJSF.
In the config tool, the guest user is specified as J2EE_GUEST (property ume.login.guest_user.uniqueids).
=======================================================================
Here are related excerpts from the installation guide
As of SAP NetWeaver 7.0 and Business Suite 2005, you can install an ABAP+Java system in one installation run. This means that AS Java is configured by default against ABAP client 001.
You can choose one of the following methods to set up your new production client:
n You install the ABAP and the Java part of your system separately.
n You install an ABAP+Java system and reconnect the Java part.
n You install an ABAP+Java system and do not reconnect the Java part.
Bonjour!! (Most frequently used word from my French vocabulary (FV)!! BTW - my FV has very few words.)
Hope everyone's doing fine. I have been bothering a few on the team with my questions and have been receiving prompt reply. And here's yet another question I need some advise on.
Excerpts from the installation guide:
As of SAP NetWeaver 7.0 and Business Suite 2005, you can install an ABAP+Java system in one installation run. This means that AS Java is configured by default against ABAP client 001.
You can choose one of the following methods to set up your new production client:
n You install the ABAP and the Java part of your system separately.
n You install an ABAP+Java system and reconnect the Java part.
n You install an ABAP+Java system and do not reconnect the Java part.
Installing an ABAP+Java System and Reconnecting the Java Part
If you need the Java users in your ABAP production client, you have to manually configure the connection of the Java part to the ABAP part.For more information about Java users, see the table User Management Engine (UME) in Basic SAP System Parameters [page 28].
1. You install the ABAP+Java system as described in this documentation.
2. You perform the client copy [page 144].
3. You reconnect the Java part to the production client as described in SAP Note 937323.
=======================================================================
Eventually, I want to change the client in AS JAVA to point to production client and not client 001. But right now, I am not even able to bring up NWA or User Management. But I can bring up "System Information" - logging in as J2EE_ADMIN user.
Please let me what needs to be done to correct this problem.
Thanks in advance!!
Madhavi

Hi,
Login into your 001 client and check whether your j2ee_admin or j2ee_guest are locked? If yes then unlock them and try again.
Also if you want to change the password then make sure you update the pasword in the secure storage area of web as java through configtool.
Regards,
Vamshi.

Third-Party User Management Tools

I'm looking for recommendations for third-party user management tools that can do the following:
- Identify and bulk-expire/no visibility users that are inactive for >XXX days
- Identify users with auto-forward rules
- Bulk-delete inactive accounts (from GW database only, not eDirectory accounts)
- Maybe even bulk-move inactive/expired accounts to a "dead accounts" post office?
I have an immediate mandate to clean up our environment, and I don't see how to do this in bulk with existing native tools. It's just one guy (me) versus 42 post offices and 23,000 user accounts...
Thanks!

You can create your own tools using the GroupWise Administrative Object API and the GroupWise Object API.
Please refer to the Cool Solutions article I wrote ( shameless self promotion ) "Scripting GroupWise" - Scripting GroupWise | Novell User Communities for more information on the GroupWise Admin API. I suggest that you modify the script listUser.vbs to include domain name ( GWUser.PostOffice.Domain.Name ) , post office name ( GWUser.PostOffice.Name ), visibility ( GWUser.Visibility ) and last login date ( GWUser.MailboxLastLoginDate). You will need to run an audit report on each post office to update the MailboxLastLoginDate property. Import the output into Excel and sort / filter accordingly for analysis.
Setting an expiration date ( MailboxExpDate ) and / or visibility ( Visibility ) is done by assigning values to the respective properties and using the commit method - e.g GWUser.Commit
Identifying accounts with auto-forward rules can be using GroupWise Object to log into each account using a trusted application key. I posted ( more shameless self promotion ) some sample code to list proxy access in another thread - https://forums.novell.com/novell-pro....html#poststop. It is not too difficult to modify the code to iterate through rules and select those that include the action forward.
Deleting is be done using the the delete method - e.g. GWuser.Delete(eadGW) where eadGW is constant with the value 1.
I would advise against using the Administrative Object API to automate moving accounts. Best practices to avoid problems during moves involve running GWCheck against user objects until there are no errors. I perform structure, contents, contents with attclip and contents with deldupfolders checks until there are no error before moving accounts. There is also the issue of how many simultaneous moves the post office agents can handle. More accurately it is the number of simultaneous purges on the source post office that need to be monitored.
If you need more help with coding let me know.
Sincerely,
Bryan Vandenberg
Originally Posted by gregamy
I'm looking for recommendations for third-party user management tools that can do the following:
- Identify and bulk-expire/no visibility users that are inactive for >XXX days
- Identify users with auto-forward rules
- Bulk-delete inactive accounts (from GW database only, not eDirectory accounts)
- Maybe even bulk-move inactive/expired accounts to a "dead accounts" post office?
I have an immediate mandate to clean up our environment, and I don't see how to do this in bulk with existing native tools. It's just one guy (me) versus 42 post offices and 23,000 user accounts...
Thanks!

User Management Setup: Registration Process not visible in Access request f

Hi,
We are trying to setup a autorisation flow for our responsibilities by using User Management.
For this I added some roles to the MISC Role category.
Then I created a registration process for these roles.
After that I would expect to see the acces request in the Additional acces request page. Unfortunately I don't.
When I run the view object behind the page, I notice that column umx_reg_services_vl.reg_funtion_id is empty for the roles I added. The seeded authorization that was allready present has a value for this column, and is presented in the screen.
I am wondering how to add a value into this reg_function_id column. I cannot seem to find the functionality in the User management pages.
We are on 12.1.2
Can someone help me out?
Kind regards,
Wilro

Hi,
You will need to have required permission (atleast read permission) for displaying this content. Access denied is showing at com.sap.portal.system/security/sap.com/NetWeaver.Portal/high_safety/com.sap.portal.heartbeats/components/PortalHeartbeat
Go to System Admin -> Permissions -> Portal permissions. Expand security zone folder -> sap.com and the subsequent folders in the above path (sap.com/NetWeaver.Portal/..) . Right click the last folder in that path as mentioned above and provide read permissions to the delegated content admin role.
Regards,
Harini S

How to find solution for avoiding WARNING J2EE SECUR-00100 ********** user-manager (see application/server descriptors) will no longer be supported in the next release of this product

HI All,
We are using Oc4j version 10g 10.1.3 , and while starting conatiner getting below warning , let me know if anyone have solution for this,.
14/01/10 01:01:29 ********** user-manager (see application/server descriptors) will no longer be supported in the next release of this product!
Please take the appropriate actions to migrate to an alternative strategy! **********
2014-01-10 01:01:29.833 WARNING J2EE SECUR-00100 ********** user-manager (see application/server descriptors) will no longer be supported in the next release
of this product!

I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section.

Error in User Management and Assigning Role

Hi,
I have configured LDAP authentication on LiveCycle Server. I get the userlist with LDAP in my admin console under User Management - User & Groups. But as soon I click on any of the LDAP username I am getting error to contact administrator. Same also happens when I check the checbox infront of the username and tries to assing role.
My Livecycle server is on WAS6.1, I also have server setup on my local where the same LDAP i have configured and I am able to access users and assign role. Is there any problem with WAS6.1 ?
I checked the logs and i got following exception in server logs.
[10/24/08 10:57:58:467 EDT] 00000039 IDPLoggedExce W com.adobe.idp.common.errors.Logger$LogConsumer run UserM:GENERIC_WARNING: [Thread Hashcode: 1028668752] | [com.adobe.idp.um.businesslogic.directoryservices.DirectoryServicesManagerBean] errorCode:8193 errorCodeHEX:0x2001 message:getPrincipal public chainedException:java.lang.NullPointerExceptionchainedExceptionMessage:null chainedException trace:java.lang.NullPointerException
at com.adobe.idp.um.businesslogic.directoryservices.DirectoryServicesManagerBean.getCacheKey s(DirectoryServicesManagerBean.java:1583)
at com.adobe.idp.um.businesslogic.directoryservices.DirectoryServicesManagerBean.findPrincip al(DirectoryServicesManagerBean.java:1608)
at com.adobe.idp.um.businesslogic.directoryservices.EJSLocalStatelessDirectoryServicesManage rBean_0dbf3d20.findPrincipal(Unknown Source)
at com.adobe.idp.um.api.impl.DirectoryManagerImpl.findPrincipal(DirectoryManagerImpl.java:13 8)
at com.adobe.idp.um.ui.user.CreateNewUserAction.doExecute(CreateNewUserAction.java:139)
at com.cc.framework.adapter.struts.ActionUtil.execute(Unknown Source)
at com.cc.framework.adapter.struts.FWAction.execute(Unknown Source)
at com.cc.framework.adapter.struts.FWAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1075)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1016)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
at com.adobe.framework.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:1 73)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java: 190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at com.adobe.idp.um.auth.filter.AuthenticationFilter.doFilter(AuthenticationFilter.java:154)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java: 190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at com.adobe.idp.um.auth.filter.PortalSSOFilter.doFilter(PortalSSOFilter.java:113)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java: 190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:771)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:679)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:546)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:478)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.jav a:90)
at com.ibm.ws.web

Hello Do anyone get anything about above exception, or is there any other information needed, please let me know ?
I still cannot found the solution for above problem, and it stops me to configuring users on Adobe LiveCycle ES, we have purchased Livecycle ES version 8.0

Get Support at Logon Page for ABAP User Management.

Hi,
Just want know that is it possible to have Get Support feature at Portal Logon page when portal is configured as User Management of Application Server ABAP as Data Source.
Basically, the password reset functionality should work from Get Support link when Porta UME is User Management of Application Server ABAP as Data Source.
If Possbile, please let me know what configuration needs to be done..
Thanks in advance.
Regards,
Aditya Metukul
Message was edited by: aditya metukul

Hi,
Try <portalschema>.wwv_redirect.url('<portalschema>.home');
Please replace portalschema with the name of your portal schema.
Thanks,
Sharmila

Unable to see few options in User management console - Hyp S 9 SS

In the User management console, unable to find the option "Add new user" under the browse pane 'User Directories'.
Is there any changes required in the configuration ?
Thanks

Sandeep,
Thanks for your reply
I assume once the Hyperion system 9 Share services is configured for the particular user. The user management console should have the provision to "Add New users" to the "User Directory"
I think this is not related to user/groups that we add in the analytic server security option.
Since this is the administration activity in the HFM, this option should exist for the issue. To bring this option is there any feature/option that needs to installed ?
Are you able to understand the situation ?
Thanks

User management exception

Dear All,
I am getting the following exception when i click on the link locked users under user administration tab.
User management exception
An exception occured.inform your system administrator.
suggested options
Look at the log file for the cause for the error
Which log file to be loooked up and i dont find any log file related to this at os level?
1. Could you please let me know which is the log file?
how to go about in fixing this issue.
Appreciate your response

Hi
if you have a super admin rights then you can check your log files
by following steps
login to your portal and after loging in remove the irj/portal from the url and type nwa and it will navigate to one screen their you need to choose Monitoring and when you choose monitoring you will see another screen their you need to press on log files.
***********please reward points if the information is helpful to you*************

User "manager" need licence?

Similar Messages

Maybe you are looking for