User not disabled after end date (9i)

Hi All,
The Disable after end date schedule task disabled 7 users but did not disable 1 user.
Any know issue around this.
Thanks
Don

Hi Gyanprakash,
i can not try disable manually, its in production. The log for disable user is commented in log.properties. Can not change that .
Just need to analyze, why this user was left out.
Regards
Don

Similar Messages

Behaviour of "Disable/Delete User After End Date" Task

Hi Expert,
We ran the given OOTB task "Disable/Delete User After End Date" and the behavior is always delete. How,if possible, to change the behavior to disable?
Thanks in advance.
SK

In order to change the behavior, you have to set the system manager preference called "Period to Delay User Delete" to something bigger than the task will make the user disabled and will automatically delete them at a future date.

OIM 11g Modify User Profile for Updating End Date

Hi Gurus!
We have an OIM implementation where users may request the creation of other users by means of a Create User request template. In this template we set the End Date to be 3 months after the request date.
In order for the requester to extend the period of a user's OIM user account (along with its provisioned resources) we customized a Modify User Profile by displaying the End Date field and automatically populate it again to 3 months after the request date. Also we developed a custom event handler to enable the user when it is disabled and the End Date is updated to a future date.
This Modify User Profile is working great when the user is still enabled (the End Date is still in the future), however, when the End Date has passed (and the user is Disabled) the requester is not able to see the user when selecting the Modify User Profile request template.
Is there a way to allow requesters to also see disabled users in the Modify User Profile request template?
Thank you in advance.
Regards,

Hi Kevin,
thanks for your reply!
But, in this case, when the user is already disabled due to his End Date, how can a requester, through the Self Service TAB, enable it?
The Enable User request template does not work since when trying to enable the user, OIM sees the End Date is already passed and the DataSet validation throws an exception.
The only way I saw was providing a Modify User Profile Request template to change the End Date and developing a custom event handler to enable the user upon the extension of the End Date...
How can, in this situation, a requester enable the user and extend its End Date?
Thank you!
Regards,

Process Chain running even after end date

Hi,
We are scheduling month end PC to run every 2 hours and also we have given end date for today evening.but process chain runs even after end date for every 2 hours.so we have to manually remove it from scheduling.
Any method how can PC stop on its own after end date .
Any help highly APPRECIATED
Thanks
Nilesh Pathak

There might be multiple release jobs for thie process chain.
So check the same. Right click on process chain --> Display scheduled jobs --> Here all the jobs logs of the chain will be available.. So check the same here...
As you have descheduled it now.. probably you may not be having it as the first release job might be moved to Schedule status as soon as the END date has reached and then second one might have gone when you have removed the chain from Schduling..
Anyway check the same.. and also check in SM37 whether any other user has triggered it manually today or not?

PARAMETER_EXCEPTION: Start date is after end date

WORKLOAD ANALYSIS (PORTAL ACTIVITY REPORTING) : PARAMETER_EXCEPTION: Start date is after end date.
Hello,
We get the above exception when we analyzed the extractor framework logs for EP Workload analysis extractor.
Can someone please advice.
Thanks
Srikanth M

Hi Nacho,
Could you please check if the Solution Manager time format for the user used for the Workload analysis is same as that of the monitored system. This error was caused in our landscape as the format in the monitored system was having a dd.mm.yyyy and that of the user in solman was mm.dd.yyyy. You can check the same in the transaction SU01 --> Change/Display --> Defaults tab --> Date format.
Thanks,
Lijin Xavier

OIM 11g - User Not enabled After the job "enable user after start date"

Hi,
I have a future hired user in OIM whose start date is set in OIM. The status of the user in OIM is 'Disabled Until Start Date'.
After the start date has passed and the scheduled job 'enable user after start date' is run, I see that the user is still in the status 'Disabled Until Start Date'. I re-run the scheduled job 'enable user after start date', this time manually, still the state of the user remains unchanged.
Please help in troubleshooting as to find out the root cause of the issue and a workaround/solution, if possible.
This issue is intermittent and has happened with quite a number of user. Any pointer would be helpful.
Regards,
Sudipto S.

I agree with Nayan.
One alternative approach can be to write your own custom scheduler which can overcome the limitation of OOTB scheduled job 'enable user after start date'. Let the OOTB job get executed first. After it, your custom scheduler should fire a simple SQL Query:
SELECT USR_KEY, USR_STATUS FROM USR WHERE (USR_START_DATE > SYSDATE -1) AND USR_STATUS='Disabled Until Start Date';
//Means those users who are supposed to get enabled today and are still not yet enabled and are in 'Disabled Until Start Date'. May be 2-3 user keys at max will come...
As you said it happens only intermittently and not for all users... So, let the OOTB scheduled job take care of most of such users... And after it has finished, if any user still remains in 'Disabled Until Start Date', your custom scheduler should enable it via using tcUserOperationsIntf.enableUser(userKey);
Using API is always better than database update... Because APIs trigger downstream provisioning workflows as well and not just updates OIM Database...
Keeping your constraints in mind, I think it is the correct answer.

Check-out button is not disable after the check out request from the same user

HI all,
I want to use check out/ in procedure in solution manager along with email notification. For that, I have maintained required settings and maintenance project for the intended solution. I want to implement a team leader- manger hiearchy for any changes to the solution. When a team member requests for the check out for any process scenario/ step, the status goes to check out requested. But, the problem is, check-out button is not disable and same user can do the check out which I want to restrict. The check out can be done only by the project manger. I guess, this is related to authorization roles for both team member and manger. But I am not able to find out. Please help me to have the authorization roles for this.
Thanks,
Rutvik Upadhyay.

Why not putting a af:fileDownloadActionListener inside the command button. In the bean you need an method like
public void exportExcel(FacesContext aFacesContext, OutputStream aOutputStream)
} You can use the output stream and when you finished just flush it. Don't close the stream and don't complete the response.
Timo

After end date of a beta exam

Hi,
This close date of tis beta exam http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=&lang=&p_exam_id=1Z0_151 is May 19. So after this and until the release date of production exam, WHAT will hapen with this Forms exam? Can it be scheduled after May 19 (as beta), when normally the exam is in POST BETA REVIEW stare, so if i log in on Pearson account, can i still see 1Z1-151? So it can no longer be scheduled ~10 weeks, until the production exam will be released?
Thanks!
Edited by: Roger22 on 03.05.2012 14:49

Access to a beta exam ends on the beta end date. From that date until the exam is in production, some exams are not available for registration at all. However, some exams will open for pre-registration. Which means that if the 151 beta exam ends on May 19, you can register for the production exam on May 20, but the appointment date will be a date in the future. You will be able to register for a future exam date starting May 20, but you will not be able to TAKE any exam between May 19 and the future start date of the production exam.
You will not be able to register for a BETA exam after the beta end date.
Regards,
Brandye Barrington
Certification Forum Moderator

Infostructure S502 not updated after certain date

There is an infostructure S502. It is not updated after a certain date.
It should be updated after saving in C011N.
This problem seems to have propped up after upgrade to ECC 6.0. Before that it was working fine.

I have tried a lot but still S502 is not properly updated. Basically the field for date i.e SPTAG is empty. Due to this when we try to select from MCRQ based on dates, no data is selected.
Is it because of some setting in MC23?

User Fonts Disabled After 10.4.11 Update!

***?? Ummm....not good! Three fonts I use regularly (Haettenschweiler, Marking Pen and Century Gothic) were missing when I opened a catalog project after installing the OSX 10.4.11 update. I launched Font Book and discovered my User Fonts had been disabled somehow (in fact there were no fonts listed!), and the program would not re-enable them.
Fortunately, the fonts were still in my home library (as well as collected in InDesign, God bless Adobe), and I was able to copy them into the main library font folder by dragging, and they did load when I opened the doc again. So my catalog project was not destroyed, thanks to this workaround. But if Font Book is broken due to this update, it does make me wonder what other horrors might have been unleashed in this update (aside from the poor Weather Widget being temporarily knocked unconscious).
APPROACH WITH CAUTION!!

Sorry for the bump, but I needed to know if anyone besides me has discovered this: you start up Font Book, and it shows that User is turned off/grayed out. Tried turning it back on from "Enable User" in the Edit menu (key command shift/command/E), but no go. Guess I could try just creating a new font directory, since the fonts are still in the folder, just not available to the system because Font Book doesn't like User anymore.
If that doesn't work I may be back.

User gets disabled after 3 login failure

I just realized this problem. I don't want users to buzz a helpdesk because of failed login. Where and how can I turn it off?
Just wonder if Is it not possible, for example disable a user after 3 failed attempts, and enable it after 2 hours?

Never mind. I found the solution.
Solution:
1. Log into the Admin interface.
2. Navigate to Configure
3. Navigate to Policies
4. Select "Default Lighthouse Account Policy "
5. Under the "Identity Manager Password Policy Options" label.
A. Find the "Password policy" and select from the drop down list the password policy that applies to your system. I chose "Windows 2000 Password Policy" because we are using ActiveDirectory pass through authentication.
B. In the text box labled "Maximum Number of Failed Login Attempts" enter an number. We entered 3.
C. Save the change.

Torch 9860 does not disconnect after ending call

Hi,
I have been having this peculiar problem with my blackberry torch 9860 smartphone for the past 1 week. After finishing a voicecall, in many situations the phone does not disconnect even if I press the end call button repeatedly. It just seems to "hang" for 30-40 seconds and then disconnect. Sometimes it dosconnects only if the person at the other end hangs up.
Kindly help out in solving this issue

Try a Battery pull please, with the BlackBerry device powered ON, remove the battery 15 seconds and then reinsert the battery to reboot device. This will clear all cache like rebooting a PC. Then try again and see if your problem persists.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

TABLESPACE cleanup not happening after table data delete

Hi all
I have a partitioned table with 4 partitions all residing in a single tablespace. I populated the table with sample data and then deleted all with a simple delete statement followed by a commit. But the tablespace is still showing data from the 4 partitions under the bytes column in query below:
select segment_name, partition_name, tablespace_name, bytes
from dba_segments
where tablespace_name='tb_name'
Am I missing something here? Do I need to run some other command after delete and commit to fully flush out the data?
FYI, my system specs are:
Windows 2008 Server Standard (32-bit)
ORACLE 11.1.0.7.0

HI,
LMT is Locally Managed Tablespace.
+Moreover, when you say the blocks will not be available immediately when do you reckon they will be available? How do I go about automating this to free up space as soon as data is deleted?+
You cannot automate this job, this is already automated by Oracle.
+FYI, both pct_free and pct_used come up as empty values for my table.+
reason for a NULL-value for PCT_USED is that the tablespace where the table resides uses automatic segments space management (ASSM). With ASSM there is no need for PCT_USED only for PCT_FREE. Oracle manages blocks automatically.
You dont worry about releasing the space, Oracle will take care of it automatically.
Go through the below link
[http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/tspaces.htm#ADMIN10065]
[http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/schema.htm#sthref2100]
[http://www.dba-oracle.com/art_builder_assm.htm]
This is an extract form Oracle docs
Understanding Reclaimable Unused Space
Over time, updates and deletes on objects within a tablespace can create pockets of empty space that individually are not large enough to be reused for new data. This type of empty space is referred to as fragmented free space.
Objects with fragmented free space can result in much wasted space, and can impact database performance. The preferred way to defragment and reclaim this space is to perform an online segment shrink. This process consolidates fragmented free space below the high water mark and compacts the segment. After compaction, the high water mark is moved, resulting in new free space above the high water mark. That space above the high water mark is then deallocated. The segment remains available for queries and DML during most of the operation, and no extra disk space need be allocated.
You use the Segment Advisor to identify segments that would benefit from online segment shrink. Only segments in locally managed tablespaces with automatic segment space management (ASSM) are eligible. Other restrictions on segment type exist. For more information, see "Shrinking Database Segments Online".
If a table with reclaimable space is not eligible for online segment shrink, or if you want to make changes to logical or physical attributes of the table while reclaiming space, you can use online table redefinition as an alternative to segment shrink. Online redefinition is also referred to as reorganization. Unlike online segment shrink, it requires extra disk space to be allocated. See "Redefining Tables Online" for more information.Regards,
Vijayaraghavan K

ACS v5.1 - Can internal users be disabled after x failed attempts?

I have noticed under authentication settings for internal user accounts there is no setting to disable the account after x number of failed attempts (ACS v5.1). This is such a fundamental requirement for user accounts that I am wondering whether I have missed something. (They include this option on Administration accounts)
Does anyone know if can this be set somewhere else or is Cisco going to implement it in a later version?
Many Thanks

Hello jrabinow ,
Thanks a lot for the reply .
We already have our AD setup to lock account of users who failed 3 consecutive windows login attempts .
However when network administrators fail to login after 3 consecutive attempts into a network device, they can still login into a network device if they provide their correct AD credentials .
Is there any specific configuration that needs to be done on the AD to be aware of the failed login attempts on the network devices and count it the same as a failed windows login attempt ?!
Kind Regards ,
Moussa

User not showing after restoring from time machine backup

I was having issues with my 2009 Macbook pro. took it to the Genius Bar. Diagnosistics all showed ok. (I had done troubleshooting before I had the appointment). They suggested wipe and reinstalll from my time machine backup. I agreed.
Returned home to do the reinstall. When I went to log in found that one of my user accounts did not show in the log in - only my main and "guest" accounts. On checking the "users" folder the user is present. It also does not show in the system preferences user screen but when I try to recreate it says it exists. Note I have done this wipe and reinstall with Mavericks
Help! Most of the content I have on my main BUT there are several things that are not.
Thank you for your attention.

Issue solved with visit to Genius Bar.
As I understand it here are the steps the Genius did. Attempt to create the account (system preferences->users) with the same information. It will say it already exists. Very carefully read the options. One will say use the existing account. BE CAREFUL because one option will wipe your data.
If you need to do this it might be worth the trip to the Genius Bar as you could wipe your data. One precaution I took was to bring a full copy of that user account onto my desktop (from the backup immediately before the wipe) in addition to the one in the user folder. Once we verified that the account was working I moved the desktop copy to the trash and again verified the account (just to be safe).
Hope this helps someone else.

User not disabled after end date (9i)

Similar Messages

Maybe you are looking for