User without the Chief position in org id to view the resources under him.

Hi,
The requirement is:
A person who is playing the role of a crew leader should be able to fill the time sheet of his crew. This person will not be given the chief position for the org id that he is tagged to. There will be different person who will be tagged to the chief position and will be playing the role of a manager.
I want to understand, what exactly needs to be done in MSS for the crew leader to fill his team's timesheet ?
Regards,
Rukmani

As such in MSS we have self services in general information page, where manager can enter details for his employees which are determined by evaluation path who reports to him which is again configurable done using OADP
In your case make a new evaluation path for the user so that he can see which employees are assigned to him not necessarily he has to be a manager
refer all information here
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=190743879
http://help.sap.com/erp2005_ehp_03/helpdata/EN/2e/5a5d45d9f24fbdb06be2ff53651c3e/frameset.htm
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=104006108

Similar Messages

Distinct boxes for chief position in Org Chart

Hi,
Is it possible to change the icons and the colours of the org chart boxes for line managers only (i.e. chief position or A012)?
What config is needed to make this change?
Thanks,
Vibhu

Hi Vibhu,
It is possible to these. For the icons you would need to write some code in the XSL file for the section that controls the icons. You can find the name of the XSL against the first section name in the detail presentation configuration in AppResources.xml. To change the box colour you need to find the detail configuration for the view and find the main presentation XSL for that view and amend that with some code.
I hope that helps! Sorry I can't be more precise but it depends on your current configuration and what you are trying to achieve.
All the best,
Luke

Gnome: switch between users without the applet

Hi,
I just found out how to trigger the "switch to another user session" stuff in gdm/ConsoleKit without the applet.
The problem was: I'd like to share a laptop with my girlfriend, but she doesn't like my environment (i3, vimperator, ...). So I installed a full Gnome desktop including gdm. Everything is nice, except the user switching stuff. You can use the gdm-user-switch-applet from within gnome sessions, but not from other ones (like my plain i3 one).
I started to look at the source code of this applet, read about dbus and stuff, and finally got something working. I'm so proud :-)
If you are interested, here's the script:
https://bitbucket.org/resi/gdm-switch-user
It seems possible to switch to any available session, but I'm satisfied activating the gdm session, at least for now.
Christoph

Hi,
I hope you have already solved this issues.
In the template properties you can set the setting for Display Variable Sceen only once.
Cheers.
Ranga.

Do open fonts work in Word for users without the font on their machine?

Our team creates documents in Word and we would like to use an Open Font (Adobe Jenson Pro)--there is quite a bit of internal file-sharing and I don't want the font to switch to something ugly when it is reviewed in Word (because Word users do not have this font installed by default). I know that there is some cross-compatibility. We would like to apply this font to the template and don't want to introduce a font issue. anyone with experience know how if this works with the Open Font in word documents for users without it installed?
thanks!!
Anne

annecroft wrote:
Thanks for your expertise. You are a little snarky, aren't you?
The coffee hasn't kicked in yet.
Open TYPE fonts are Adobe fonts
Nope. OTF's are made by many different companies. Adobe DOES have many of them yes but they don't rule the market on them.

Disable the user in the resource thru IDM

Hi I am doing active sync.while doing activesync I am creating the user in another resources also.while activesync I want to disable the user in IDM and also in the resources based on one user attribute. I am using "waveset.disabled=true" to disable the user.
with this the user is getting disabled in lighthouse but not in resources like LDAP.How can I disable the user in resource also , which attribute need to be set to disable the user in resources also?. Any help will be great.

I added the following code to the bottom of active sync form to disable a user from all resources without luck. </br>
The side effect of the following code is to remove all resource names from waveset.resources list. What did I miss?
Thanks in advance for any clue.
<FieldLoop for='name' in='waveset.accounts[*].name'>
<Field name='accounts[$(name)].disable'>
<Expansion>
<s>true</s>
</Expansion>
</Field>
<Field name='update.accounts[$(name)].disable'>
<Expansion>
<s>true</s>
</Expansion>
</Field>
</FieldLoop>

Chief Position Top Org Unit

Good Morning All.
We are having a problem with regards to the details that our Chief Exec can see within MSS. At the moment she can see all the details with regards to ESS and the inbox, however MSS does not seam to show any details. I have moved the position into another org unit and everything works fine, and have put my self in the top position and I get the same errors. We have created a new position and changed the user roles, how ever this does not make any difference.
Any Ideas?

Hi Jason
How many direct subordinate employees are we talking about? Unless your CEX is the direct manager of several thousand employees, you probably shouldn't have a difficult time.
So if you don't have a role issue, then do you think it's possible one or more of the subordinate employees has data issues? Would you be willing to remove subordinate employees(by moving them to other org units)/org units to see if that isolates a situation where it runs faster?
Is this the only piece of MSS where this extended wait is being experienced for this particular user?
Thanks,
Chris

How can I log in to my macbook user without the rainbow wheel coming up?

Okay, So I try to log in to my macbook and after like 10 minutes the screen logs in but when it starts to load my desktop the computer frezzes and rainbow wheel pops up, then it ends up taking forever that the screen saver comes up and eventually I have to just restart the computer. Is there anyway I can prevent this from happeneing ?

Might not be enough free space on the startup disk.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
If disk space isn't an issue and you are running Mac OS X 10.4, 10.5, or 10.6, launch Disk Utility located in /Applications/Utilities
Select the startup disk in the panel on the left then select the First Aid tab.
Click Verify Disk (not Verify Disk Permissions)
Follow the instructions Using Disk Utility repairs are necesary.
If you have Lion v10.7 installed, use Lion Recovery to repair the startup disk.
And check System Prferences > Accounts (or Users & Groups) - Login Items
Delete any apps listed in Login Items, restart your Mac.
BTW .. when you post for help, please tell us which Mac OS X you have installed.
Thanks!

User does not exist in the resource

Hi,
Please help me regarding the following situation
I have created resource(Siebel) account for a user(eg: 00012345) through IDM, Here IDM adds 'A' to the accountID while creating the resource(Siebel) account. Here IDM user account is 00012345 and resource account is A00012345. And I have Unliked and Unassigned for that user from the resource(Siebel) through the admin page.
Then I have open the user accout through admin page and Assigned the resource(Siebel) then went to Attributes page then clicked on "Refresh" button then its giving error as "account "00012345" does not exist in Siebel resource". If i created the resource account without adding "A" to account ID then it would not be giving this error.
Please suggest me to solve this.

Have you updated your Identity Template for the resource
Identity Template Defines account name syntax for users. For most resources, the syntax is the same
as the account ID. However, the syntax is different if the resource uses hierarchical
namespaces.

How to create a new user without any sample objects from any other user?

Question as the title.
I had the example dababase installed when I installed the Oracle database.
Every time, when I create a new user, there will be some example objects coming
with the new user.
How can I remove these objects from the new user?
Or, how can I create a new user without the example objects?
Thanks in advance.

I think the easiest way for you would be to use OEM.
Just locate each object that you want to remove and right click->remove. Don't bother doing this for any indexes as these will be removed when you drop the corresponding tables.
If you want to try command line through sqlplus then identify the objects you want to remove by selecting from the user_objects view while logged in as this user. This will give you the name and type of object. Then issue the relevant drop command.
It's probably worth making sure you have a valid backup first, just in case things go wrong!

Designing Java Apps for Users Without a JRE Installed Yet

Hi, sorry if this post is in the wrong place, but here goes:
I'm designing a Swing Java application for a client. My client intends to distribute/sell this application.
I'm concerned because, chances are that at least one of the people he distributes this application to will not have the JRE installed and will thus be unable to run the application.
Can anyone give me some suggestions on ways I can make my application more convenient for users without the JRE currently installed? Even some kind of error message that would direct the user to the JRE download site would be okay.
kwikness
Edited by: kwikness on Dec 2, 2009 5:56 PM

Use NSIS and package your application with JRE.
Add your jar files to lib/ext of the JRE package.
NSIS can create a short cut (desktop/start menu) to launch java class/jar file
I would not use webstart unless you are sure that clients will have access to the internet, the bandwidth is not an issue and installing the new JRE is allowed (permissions, SLA, etc.)
Best regards.

Access to User without Password

A temporary employee (now gone forever) set up some workfiles on a non networked Mac in their own User - as the administrator can we access the User without the password (which we have buckley's of getting).

Use the "Accounts" System Preference" from the administrator account. Click the lock at the lower-left to unlock it, select the user's account, and change the password. You can also use Get-Info to change ownership or permissions on the user's files and folders if you click the lock icon in the Get-Info window (click the "Details" triangle at the bottom of the window).

OVD - exclude users without uid attribute

Hello,
i'm mapping an LDAP using OVD. Users and Groups are OK.
Now i need to exclude users without the attribute uid ... how can i do it?
I try to do it using the "DN Matching" of the adapter, but as soon as i start to put some expression related with uid, i realize that groups are not mapped anymore because they don't have the attribute uid as well ...
Can this be done?
regards,
Pedro Ribeiro

You can configure 2 adapters. One for users and another one for groups. In the user adapter, you can then put in the filter.

Group policy software installs to remote users without VPN

Matt:Funny you should ask this, I justpublished a post in the Active Directory groupon how to extend AD domain services to remote users without the cost and complexity ofa traditional VPN. While DirectAccess provides a viable option, it requires Windows 7 Enterprise clients and there are a lot of moving parts to making it work (see this article).Pertino gives you the functionality and end user transparency of DirectAccess, but it works with any Windows 7 client version as well as Macs and is super simple to deploy and administer.Here's a video that shows you how.If it looks like it might work for you, you can try Pertino free for 30-days by goinghere.

If you were able to configure DirectAccess; your remote users would be connected to the corporate network without a VPN at all times - though I'm thinking this is not applicable to your situation.
But strictly speaking, you cannot use Group Policy Software Installation to manage software on computers that are not connected to the corporate network. 1) They are unable to retrieve the policy, and 2) unable to retrieve the software package.
You would need a 3rd party solution for this.

What determines when the My Timesheet item will display in the Resource Availability Page?

Can someone point me to where I can get more information on the My Timesheet item that displays in the Details section of the Resource Availability page? I cannot figure out where this information is coming from or what determines how many My Timesheet
lines you see.
In one Project Server environment, I noticed that each user had 3-4 My Timesheet line items in the Resource Availability page. The period I was looking at spanned 8 weeks and all of those weeks were in the future. I checked the Manage Timesheets
page for one of the users that had 4 My Timesheet items in the Resource Availability page. The user did not have any timesheets created for the 8-week period I was reporting on in the Resource Availability page. To make matters more confusing,
some resources only had 3 My Timesheet line items in the Resource Availability page for the same period. So it seems like something other than active timesheets for the period is dictating how many My Timesheet lines display. Also curious was the
fact that ALL of the My Timesheet items for all users in the Resource Availability page (7 or 8 people) showed "0h" for all of the periods displayed.
I decided to look into this further in a separate Project Server environment, because I didn't have access to the first one at the time. Both environments were configured to not use single entry mode and used resource plans to calculate allocation.
In this second environment, I entered hours against an administrative task classified as non-working time for one week and submitted / approved this sheet. I entered hours against a project task for a second week and submitted / approved this sheet.
I then used the Resource Availability page and "reported" on a period including those periods (20-week period total). I didn't see a single My Timesheet item. Not even any showing the "0h" designation I had seen in the first environment.
So long story short, I cannot figure out the criteria that dictates when a My Timesheet item displays. And I also can't figure out the purpose. If the Resource Availability page is designed to show planned work (either through the planned allocations
stored in resource plans or planned assignments through project schedules), what is the point of the My Timesheet values? Wouldn't planned work be captured in the project line items? If it's for administrative, non-working time only, why would
the My Timesheet items not show up in the second environment scenario? Any help / insight would be appreciated.

Hi,
After investing a lot of time i found one link which is talking about My Timesheet in resource availability page.
I believe link providing proper explanation though i would like to test it on my system.
http://social.technet.microsoft.com/Forums/en-US/projectserver2010general/thread/83e46a4d-3c05-4dda-8566-669b12b673f4
kirtesh

Org Unit with more than one Chief Position

Hi,
we have implemented MSS via the portal using a one-to-one relationship between Org Units and Chief Positions, and we would now like to have multiple Chief positions attached to one Org Unit.
As far as I can tell from the SAP documentation, this should be straightforward, but the results we are getting do not seem correct.
I have an Org Unit that has position 1 and position 2 assigned to it with relationship A/B 012 denoting that they are Chief Positions.
User 1 is holder of position 1 and user 2 is holder of position 2.
Both users have the same security roles.
The views used on the portal are configured using the MSS Object and Data Provider functionality, using the standard ORGEH view, evaluation path for root objects SAP_MANG and evaluation path objects SBES. The checkbox 'Excl. Managers' is ticked.
The problem is this - both users can see all the subordinate employees in the Org Unit when they log on to MSS but user 1 can also see user 2 in his list of employees, which is not correct as user 1 and user 2 are both chiefs. User 2 cannot see user 1 in his list of employees, which we would expect.
The only logic we can see for user 1 being able to see user 2's details is that user 1 must be somehow defined as the 'superior' Chief Position, but we have not defined this as far as we know.
Any ideas as to why this is happening for us?
Many thanks,
Fran.

Hi Fran,
Sounds like you have set up the reporting structures and MSS properly. I do question why two chiefs for one org unit. As you stated, both can see all employees and so both can approve time, give pay increases, etc. without the approval of the other. If this is want you want, then you have set it up properly. Usually, one has to approve the actions of the other, thus, is in a superior relationship. This can be handled by having a higher level new org unit with the higher person as chief and the lower stay as head of the lower org unit which reports to it.
As you have it now, both individuals have the same rights and access. They should both be excluded from iViews if you checked the "Excl. Managers" box. Since, you just recently made one a manager, have you checked for any date dependencies? If the Chief #1 is selecting a view for "Current Year", for example, he would be able to see all persons who reported to him for this year, which includes Chief #2. There are no 'superior chief' designations (except by structure), so without being able to view your configuration, my suggestion is to check all dates for the assignments and relationships vs. dates of the view.

User without the Chief position in org id to view the resources under him.

Similar Messages

Maybe you are looking for