Using a conditional staement as part of a function argument.

I'm trying to consolidate two calls to a function down to one. I'm trying to do it by passing some sort of conditional expression as an argument equivalent to:
get_exists_psa_req_id(
decode(fin_sr_id, NULL,' ',' AND sched_requirement_id = '|| to_char(fin_sr_id))
If fin_sr_id, is NULL the select statement I'm passing this to gets a blank line. If not then the additional AND phrase gets added.
I tried that and got a message back saying that you can only use decode in a SQL query.
What can I use or can I do anything like this?

Use CASE instead:
get_exists_psa_req_id (CASE fin_sr_id
WHEN NULL THEN ' '
ELSE
Sorry Michaels
Be care full with CASE and NULL
Please check following posting NULL is treated differently in CASE then DECODE
may be you have to use
CASE WHEN fin_sr_id IS NULL
THEN ' '
Re: Null values and Switch CASE - Conflict !!!
Message was edited by:
devmiral

Similar Messages

Use of end-date as part of Primary key in SAP Tables

All,
Any ideas on the rationale behind SAPs use of end-date as part of Primary key in general, specifically on condition Tables(A9xx for example) instead of Start-date? appreciate any help!!
Best Regards
TRP

Hmm, another example is CSKS, this logic was probably designed already in the 1980s...maybe it was seen beneficial to be able to select the currently valid record by using the primary key only (the first record where DATBI is larger than system date, not possible when DATAB is the key instead).
Maybe there are better explanations. Why do you need to know this, just curious?
Thomas

How to use if condition in XML Publisher Desk Top

Hi..,
How to use if condition in XML Publisher desk Top.
Please guide me.
Thanks,
Suresh.

What kind of condition you want to use?
You can use Condition like this:
<?xdofx:if condition then value1
else if condition then Value2
else Value3
end if?>
Please go thru XML Publisher User Guide.
Thanks
Ravi
[email protected]

Using OR condition in RTF Template

Hi,
How to use OR condition in RTF?
say for example,consider the EMP table.
I want to show the employees of department 10 and 20 in my XML Publisher report.
How can i write --
if deptno = 10 or deptno =20 in RTF template

you can add the condition in RTF template
<?if:XMLfield=30 or XMLfield=10 ?> to display <?end if?>

Using If condition in For EACH Group

Hi all,
I want to use if condition in for-each-group. Basically my requirement is that i want to use dynamic grouping. There will be two groups and the upper group and lower group will be selected on the basis of a report parameter.
I hope i made it clear enough. So please help me in this. Any ideas will be highly appreciable.
Thanks and regards
Naveed

You can add a If condition filed after the for-each field
for EG : <?if:ADDRESS_TYPE = 'Employee Address'?>
and then add anothet field which has <?end if?>
Hope this helps.
Thanks,

Transformation issue while using IF condition.

hi everyone,
i am using bpel transformation based on the condition of field using IF condition.
A       B          C          D
10     20          30          40
20     20          30          50
30     30          20          60
40     40          20          70
now i need to apply IF condition in transformation on the filed B. if B = 20 transfer the data to one table or B NE 20 to other table
now my issue is, it is able to differentiate the rows, but the data in the field in second table remains same 20.
as i hope its storing the data in buffer location and writing it. after mapping with the fields in source.
can anyone suggest, how to get the actual value after differentiating the records.

Declare an internal table with two fields lar and another field for seconds.
IF v_lar01 = 'MSTD' and v_vge01 = 'MIN'.
it_time-lar         = lar1
it_time-seconds = t_plpo-vgw01 * 60 " minutes to seconds
else.
it_time-lar         = lar1
it_time-seconds = t_plpo-vgw01 " second
endif.
append it_time.
IF v_lar02 = 'MSTD' and v_vge02= 'MIN'.
it_time-lar         = lar2
it_time-seconds = t_plpo-vgw02 * 60 " minutes to seconds
else.
it_time-lar         = lar2
it_time-seconds = t_plpo-vgw02 " seconds
endif.
append it_time.
and so on...at the end sum it_time-seconds and do the calculate to get hrs n minutes from seconds
Mathews

Using applet to select a part of an image and then save it

Hi ,
I want to use applet to select a part of an image and then save that particular selected part to a server. can anyone provide me a code for this. I have found codes on the sun site which help in uploading an image but I am having trouble in trying to select a part of the image.

Sorry to get back to you so late, but I was away from my computer this afternoon.
I'm not sure just what you are after. I do see that you have positioned the tree on the labels. I went to the web site for the label company, and their instructions are not too helplful.
http://www.pixentral.com/show.php?picture=15sBkl9OZE9xSkHoLMxgwjTFv2VCg1
I changed the white portion of 1 label to black - - this can be any color. To do this use the magic wand tool, tolerance=10 worked for me, then go to Edit>fill selection.

Problem using a conditional suppress in a cross-tab ?

is there a problem using a conditional suppress in a cross-tab on a row or summarized field in crystal XI?
I am using the following conditional suppress on a summarized field and its rows
         If {@SortCode}=4 then true;
Sortcode is a group sorting formula field
the summarized field is a formula field as well.
All of the summarized fields are suppressed although the cross- tab performs correctly on @Sortcode and the summarized field when not using the condition
it seems to me to be a reporting flow issue although i've included "whileprintingrecords" and "evaluateafter" with no success.
i have also moved the cross-tab from the report header to group header and applied a conditional suppress on the group header through section expert.
this supresses the group i dont want but includes grand totals for each group and also varys the number of columns
i can't filter on sortcode because one of the grand total calculations requires those records and a subreport or second cross-tab does not contain the same number of columns
the cross-tab is necessary as a client may have columns spanning one to many pages
thanks for your help

Hi I have a similar problem,
I have an clock in solution, where i have some dates with data such as, various entries for a date eg, 01/11/2010 1hr, 01/11/2010 3 hrs etc, 03/11/2010 2hrs , 05/11/2010 4.5hrs, 05/11/2010 4 hrs so i need total for each day and highlight only those days, where total is less than 4.5, including days which donu2019t have records eg 02/11/2010 & 04/11/2010, I summarise in totals using a cross tab, to get summarised output for each day as,
            Totals
01/11/2010    4
03/11/2010    2
05/11/2010    8.5
in order to get the dates which didnu2019t have records, i added a dataset from Excel spreadsheet where i just have a sequential dates for the year , and use record selection to select only those dates in range which i need to display, so the result i get
01/11/2010    4
02/11/2010    0
03/11/2010    2
04/11/2010    0
05/11/2010    8.5
so far so good, all using cross tab, now i want to suppress rows which have total > 4.5 so the result should be
01/11/2010    4
02/11/2010    0
03/11/2010    2
04/11/2010    0
How can i do that?

Use Global Conditions when Deploying an Application to a User

Hi,
Use Global Conditions when Deploying an Application to a User:
I would like to deploy App-V Application with User centic in mind. The problem is that when the user login to a specefic typ of desktop the application shall be deployed. But if the use login on there primary device or some other
device with same SLA the Application shall not be deployed.
I think I can use Global Conditions to solve this. I have read about GC and it looks like I could greate a GC rule that deploy the software if the computer is in an AD-group or maybe becas all this computer starts with same prefix, sp maybe
if the computernamn starts with PC the application will get deployed.
The issue is that there is differant SLA on the computers that the User login to.
Or what mor can I do?
/SaiTech

Just keep in mind this puts a load on AD, a Domain Controller can get tickled silly by these Global Conditions running from each of your Clients, depending on the scale of your environment it can have an impact. It's a great idea GC's, just need to consider
what load you are putting on the infra when they run.
Might not be an issue for\to you, worth nothing all the same.
Robert Marshall | This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs

Using RB00 condition type for Price Adjustment

Hi,
I have to do a price adjustment due to some rounding issues in the pricing of my sales order.(Using standard Pricing Procedure RVAA01). I am thinking of using manual condition type RB00 at Item level that can accept both positive and negative values depending on the situation.
If the calculated value>expected value then the user will enter negative RB00 value manually and
if the calculated value<expected value then the user will enter positive RB00 value manually.
The account key is however different in standard Pricing procedure for RB00 and it is ERS and for standard Base Price (PR00) it is ERL.
So, my question is that does that make any difference if I maintain condition records in VKOA for RB00 same as PR00?

Hi
If you are looking for rounding then you round the decimals by not maintaining any decimals.But if it is a price adjustment then your approach is correct
If it is VK11 then there is no need to maintain condition record for RB00 as it is a manual condition type at item level
If you are talking to maintain revenue account determination VKOA then you have to maintain as whenever you give discount then it will hit some G/L account .So you should assign a G/L account also
Regards
Srinath

How to use "where" condition when we use update or delete in a dbadapter?

Hi
I want to update/delete a record in a database table based on one of its fields. Which means I have to use "where" condition to check the value of the field and only then I can decide whether or not the record can be updated/deleted.
When I try to use the dbadapter update/delete options, I dont see any provision for writing the "where" condition.(May be I am missing something).
I know that I can use the custom sql option and write an sql command to achieve this.
But I would like to know if this can be done when using the update/delete option itself in the dbadapter.
Thanks in anticipation.
Ravi

Hi,
You can use the logical delete option. In that case you can supply a value for the column that indicates if a record is changed and have it picked up by the db adapter.
Andre

Use a Content Search Web Part to Display a Picture

Hello -
Is there a way to use the Content Search Web Part to display the most recently added picture to a specified application?
Please let me know if you need additional information to answer this question.
Thanks,
Jordan

Hello Jordan,
I believe you could do this :
filetype:jpg OR filetype:png OR (and so on for all
images types)
AND path:"http://yoursite/youlibrary"
Regards
Samuel
Sharepointerie.com

Can you use a flex application as part of a whole web page?

Hello all,
Have a quick question. I am coming over from a flash developing background, and I commonly used smaller flash files as 'part' of a entire web page. For example, a small flash video player section with a combo box to select the video to play; this swf file would be sized at about 600px wide by 400px high. Then I would just put that in a div tag and add it to my web page. I am trying to do this with flex, but I am running into issues. It seems that the actual published swf wants to run at 100% of the browser window size. I tried adjusting these dimensions; first trying within flex in the <application> height and width props, but that didnt do the trick; then tried to just use the published .swf file in the web page, and set its <object> properties to my required height and width, which 'almost' works but still falls apart when the video player's full screen button is pressed.
So, is it possible to use a flex 'app' as part of a web page, or was flex intended to run on its own and 'not' as part of a web page? Thanks in advance!

You definitely can. I typically drop the Flash/Flex app into a "mainContent" div within my larger page structure, so my page would look something like this:
<html>
<style type="text/css">
     #mainContent {height: 600px; width: 900px;}
</style>
<body>
<div id="topNav">BLAH</div>
<div id="sideNav">BLAH</div>
<div id="mainContent">
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
            id="MyFlashApp" width="100%" height="768"
            codebase="http://fpdownload.macromedia.com/get/flashplayer/current/swflash.cab">
            <param name="movie" value="MyFlashApp.swf" />
            <param name="quality" value="high" />
            <param name="bgcolor" value="#FFFFFF" />
            <param name="allowScriptAccess" value="sameDomain" />
            <embed src="MyFlashApp.swf" quality="high" bgcolor="#FFFFFF
                width="100%" height="100%" name="MyFlashApp" align="middle"
                play="true"
                loop="false"
                quality="high"
                allowScriptAccess="sameDomain"
                type="application/x-shockwave-flash"
                pluginspage="http://www.adobe.com/go/getflashplayer">
            </embed>
    </object>
</div>
</body>
</html>
Note that I'm only using the HTML approach, but the Javascript should work just as well. With the flash set to width=100% and height=100%, it will fill the enclosing div, but that's it. So, if you wanted to make this expand vertically but not horizontally, just set your CSS style to height: 100% and leave width a px or em value. Note that the enclosing divs (i.e. if you had a wrapper div around the navs and mainContent) would also have to expand/contract.
I don't know about the effects of going full screen, though.

V-41 tcode error :Table 304 is not defined for use with condition type PR00

Hi All,
I am trying to create a BDC using the transaction V-41.
The first screen has fields:
ConditionType and Table, where I have to fill values ZPM1 and 800 respectively.
But as soon as I enter the tcode v-41 and say enter, the above mentioned fields are already having the values 'PR00' and ' 304'. Normally if you take an example fo t-code VA02, all fields are blank.
Then an error message is displayed:
Table 304 is not defined for use with condition type PR00
This behaviour is not allowing me to use the BDC feature.
Please advise me on why this is happening. What are the possible solutions I can use to clear these values programmatically?
Can anything be done via customizing?
Regards,
Namita.

Dear ILHAN ,
Well the problem you are facing is having the following solution:
Table 304 is not defined for use with condition type PR00
Message no. VK024
Diagnosis
The selected condition type does not fit in the condition table, that is the basis for the condition record. Alternatively the selected condition type is not included in the condition types that were selected on the selection screen or that are defined in the variant of the standard selection report.
Procedure
Úse F4 help to choose a valid condition type.
If this does not give you the required condition type, check in Customizing for condition types and the related access sequences.
In the condition maintenance also check Customizing for the selection report (pricing report), that you have selected in the navigation tree, using the standard condition table as a reference.
I hope this helps.
It has worked for me.
I gave it a try and what I am getting using the transaction V-41 is create Price condition (PR00) : Fast Entry.
Please award points if you find it useful.
Regards,
Rakesh

Very urgent (using join conditions in PI)

Hi PI gurus.
My scenario is SOAP to JDBC(Portal Webdynpro screen to Oracle database).
I have a requirement to fetch some complex data from the database using complex nested queries.How can i go ahead using join conditions in PI.Here the client is insisiting only on queries and rejected all other methods for solving this like
1)Java proxies
2)stored procedures written in the database system
3)Create a logical view in database system .
The following option is permitted for me by the client to follow
· Using the SQL_QUERY as a query method in the JDBC Receiver Channel in XI
· Trying out JOIN conditions to make multiple query into a single query:- Here need to check the feasibility of the JOIN Condition
Please help me to complete our task.
points will be rewarded for helpful answers.
Thanks & Regards
         Veena

Define the data structures (Request & Response)
A JDBC Synchronous scenario, the response message type name is dependent on the request message type name
i.e., if request is
Dear Raj,
This is my scenario SOAP-to-JDBC(syn) with out using BPM's.
4datatypes & message types,
MT_JDBCRequest
--->Statement1
My response msg type
MT_JDBCRequest_response
>Statement1_response
>row
twoMessage Interfaces, two mappings (for request & response) and one interface mapping
Configure the Objects In Integration directory.
Define the Web services and save the WSDL file After completion of configuration.
WSDL file is used for the integration of Portal - PI scenario.
Process Flow:
1.     User requests for a report from the available list of PSMA reports by providing required set of input parameters.
2.     Portal forwards the request with these input parameters to PI using web service model through SOAP protocol and the required results are derived from PI
3.     Report is viewed on portal screen.
Thanks & regards,
   Veena

Using a conditional staement as part of a function argument.

Similar Messages

Maybe you are looking for